Exam arena simulationроботи

I'm seeking an exam invigilator with at least a Bachelor's degree to administer an on-site exam in Najran. This is a one-time gig with the potential for future opportunities. We provide test administration and accommodation solutions to test-takers nationwide. For this purpose, we look for professionals who we contact on an "as-needed" basis to see if they are available to assist test takers for their approved accommodations. We provide complete training and assignments pay hourly for the entire scheduled time, even if the exam ends early. We have a computer exam coming up where a test taker has been approved for a Reader. For this assignment, you are required to be present on-site, sit with the test taker, and read the exam content ...

I need to build an approximately 1-cubic-foot chamber capable of generating and maintaining adjustable negative pressure up to -4 psi using analog, user-controlled settings for pressure and cycling frequency. Needed to do very basic testing of a baby pacifier. - Vacuum Source: Diaphragm or piston vacuum pump capable of reaching -4 psi. - Cycle Timing Control: Timer relay, pulse-width modulation (PWM) controller, or some other way to adjust frequency up to approximately 2 Hz. - Monitoring will be done separately by manometer and counting activations per minute. In other words, this will be very basic. Nothing fancy. - No need to design the box or it's ports at this time. Just the electronic components described above. If responding, please put "howdy" in the greeting line s...

...duty cycle) using a new thread and osDelayUntil function. Include independently written code within UserThreads.c. Bare-Metal Implementation: Repeat the functionality without RTOS using bare-metal programming. Provide a comparison report covering implementation differences, memory usage, and performance. Deliverables: Working project files for STM32CubeIDE and Keil MDK Lite. Screenshots of simulation results, including analyzer outputs. Full source code (UserThreads.c, SineLut.c, and others as necessary). Comparison report between RTOS and bare-metal implementations. Short description to each task what was done for documentation. Requirements: Knowledge of STM32 microcontrollers, RTOS (CMSIS-RTOSv2), and Keil MDK. Experience with STM32CubeMX for configuration. Ability to imple...

...capacity, which updates dynamically as vehicles are connected or disconnected. Simulation Features: Total Power Capacity Display: The total station power capacity (600 kW) is shown prominently. After each vehicle connects to a charger, the total available power is recalculated and updated on the display to reflect the remaining capacity. Vehicle Customization: Users can add vehicles to the simulation and customize their specifications: Battery Voltage: 400V or 800V. Battery Power: Options include 50 kW, 100 kW, or 150 kW. Battery State of Charge (SoC): Can be set from 0% to 100%, affecting the charging needs. Each vehicle is visually represented in a unique color: blue, red, green, yellow, black, or white. Simulation Process: First car arrives: A vehicle (e.g., a bl...

I'm looking for a civil engineer or civil engineering student from India to help create competitive exam study materials for the GATE Civil Engineering exam. The materials should cover all topics in the GATE syllabus. Key Responsibilities: - Develop comprehensive study materials in PDF format covering all GATE Civil Engineering topics (Structural, Geotechnical, Environmental, etc.) - Create a mix of lecture notes, practice questions, and solved previous papers. Ideal Skills: - In-depth understanding of GATE Civil Engineering syllabus - Strong civil engineering background - Experience in creating educational materials - Ability to present complex information clearly and concisely - Proficient in PDF creation and formatting. Your expertise will help aspiring engineers...

I'm looking for a talented game developer who specializes in creating mobile simulation games. These games should be interactive and engaging, with the following key features: - Real-time strategy: The game should challenge players to think and act quickly. - Multiplayer support: I want the games to be sociable, allowing players to compete or cooperate with others. - In-app purchases: The game should be monetizable through in-app purchases, enhancing the gameplay experience while generating revenue. Ideal candidates for this project would have a strong background in mobile game development, particularly in the simulation genre, and experience with implementing real-time strategy elements and multiplayer capabilities. A good understanding of designing for in-app purchas...

What is the amount of the nitrogen that cause the CDA unable to flow down in swirl pattern along the internal wall of the quartz tube?

I am seeking a professional to help simulate and analyze how compression affects the thermal behavior of lithium-ion ...generation in the battery under mechanical stress, considering internal resistance and exothermic reactions. The ideal freelancer for this project should have experience in mechanical and thermal analysis, particularly with lithium-ion batteries. Proficiency in simulation software and understanding of battery materials and behavior under stress is crucial. Previous work in mechanical deformation analysis will be an advantage. The project will utilize ANSYS for the simulation. Deliverables should include a detailed report of the simulation results and analysis. The final report should be provided in both PDF and Word formats. The project should be c...

I want to match the expected return to the highest possible amount by making the bet amount a virtual simulation Based on each probability, we are looking for someone who is good at math who can make the expected return the most

Hello, I am looking to create an internal website for driving school management. - Creation of a student file. - Creation and management of rates and teaching contract. - Registration of teachers so that each student can be associated later. - Calendar of practice reservations where the driving school can assign practice time and teacher. (For exam reasons, the agenda must have the option of blocking hours as a driving school, since exam dates are not stable in our country.) - Creation of rates and billing at the time the student purchases the practices. - Push notifications and automatic email reminders to students reminding them of practices 24 hours before. - Possibility of sending push messages to students as "an announcement" or some general communication. - In...

Simulation of Composite Layer Draping

I am seeking assistance in recruiting 12 senior-level candidates with expertise in magnetic simulation, physics, and engineering for a project involving magnetic simulation software. Key Requirements: - Candidates should have significant experience with magnetic simulation software and possess a strong background in physics or engineering - Strong programming skills are also advantageous - Candidates should be senior-level professionals with a proven track record in these fields Ideal Skills and Experience: - Extensive experience in magnetic simulation - Deep understanding and background in physics and engineering - Proficiency in using magnetic simulation software - Strong programming skills The anticipated start date for the project is immediate.

The objective of this project is to create a realistic 3D model of the product along with a functional representation that demonstrates how it works. The 3D model should feature a detailed and visually accurate design, incorporating high-quality textures and materials to highlight the product's aesthetics. The functional representation will include an animation or simulation to showcase the product's working mechanism and usability effectively. Deliverables will include the 3D model in appropriate file formats and visual outputs such as rendered images or videos that highlight both the design and functionality.

...software Strong skills in finite element modeling Ability to complete the project within a 1-week timeline Export capabilities for the created model Project Scope: Detailed FEA model development Precise engineering analysis Professional model export Budget: $50 Timeline: 1 week Recommended Requirements: Minimum 2-3 years of experience with Abaqus Strong technical background in engineering simulation Ability to deliver high-quality, accurate models Familiarity with model export procedures Suggestions for Improvement: The budget of $50 might be quite low for a professional Abaqus modeling task. Skilled Abaqus engineers typically charge $50-$150 per hour. Consider increasing your budget to attract more qualified professionals Provide more specific details about the exact type ...

I am looking to create an interactive 3D simulation that demonstrates the step-by-step construction of a house. The project will serve as a visualization tool for clients, allowing them to interact with different parts of the building process, explore details, and customize elements. The simulation should be user-friendly and visually appealing. Key Features Required: 3D Model Integration: The house model will be built by the freelancer with individual components (e.g., foundation, walls, roof, windows) modeled separately. Smooth animations showing the progressive assembly of these components. Step-by-Step Assembly Simulation: Users can navigate through the building process step-by-step (e.g., click "Next Step" to add walls or "Previous Step" to ...

Будь ласка, зареєструйтесь або увійдіть в систему для перегляду деталей.

...Generating the PWM signal using a 555 Timer IC or equivalent, to control the motor speed. - Implementing a PID controller to adjust the PWM duty cycle based on feedback from the motor speed. - Simulating and testing the motor’s performance, ensuring the system achieves the desired speed with minimal overshoot, steady-state error, and fast response time. - Documenting the process, including the design, simulation results, and performance evaluation. The deliverable will be a fully functional Simulink model of the motor system with a working controller, performance metrics, and a final report. Ideal Skills: - Proficiency in industrial automation. - Extensive experience in motor control systems. - Knowledge of Pulse Width Modulation (PWM). The preferred software for this pro...

I'm looking for an expert in Ansys to assist me with a dynamic structural analysis. - The focus of this project will be on metal materials such as aluminium - Your task will involve performing a comprehensive evaluation of the structural response of the met...project will be on metal materials such as aluminium - Your task will involve performing a comprehensive evaluation of the structural response of the metal under dynamic conditions. - Modalanalysis Ideal skills include: - Proficiency in Ansys, particularly in conducting dynamic structural analyses. - Strong understanding of metal material properties. - Experience in interpreting and presenting simulation results. Please provide examples of similar projects you've completed in the past. I need it for an study proj...

...mock test platform with robust server capabilities. This platform should support multiple-choice questions (MCQs) and be able to provide students with detailed performance analytics. Key Requirements: - The platform must be able to deliver performance results to students instantly after they submit their test. - The server should be reliable and capable of supporting multiple students taking an exam concurrently. - Secure user authentication and authorization mechanisms must be in place to protect students' data. - The platform should include a timer functionality to manage and enforce the duration of the exams. - The platform should support randomization of questions to ensure unique test experiences for each student. - Ensure the platform is fully compatible and responsi...

I'm seeking an expert in Msc Adams simulation for validating a mechanical system's design. The primary focus of this project will be on assessing the kinematics and dynamics of the system. Ideal candidates for this project should possess: - Extensive experience with Msc Adams simulations - Strong understanding of mechanical systems - Ability to analyze and interpret kinematic and dynamic data

... **Required Skills and Experience:** - Strong portfolio demonstrating projects in **power electronics**. - Proficiency in embedded C/C++ programming. - Hands-on experience with microcontrollers and embedded systems. - Knowledge of battery management systems and protection mechanisms. - Expertise in hardware interfacing and debugging. **Preferred Skills:** - Familiarity with simulation tools (e.g., MATLAB/Simulink). - Experience with communication protocols (I2C, SPI, UART,STM32). - Background in display module interfacing for indicators. **Why Work With Us?** - Opportunity to showcase your expertise on a critical, innovative project. - Competitive compensation and flexible work terms. - Potential for long-term collaboration if we are impressed with ...

Project Description: I am looking to create an interactive 3D simulation that demonstrates the step-by-step construction of a house. The project will serve as a visualization tool for clients, allowing them to interact with different parts of the building process, explore details, and customize elements. The simulation should be user-friendly and visually appealing. Key Features Required: 3D Model Integration: The house model will be built by the freelancer with individual components (e.g., foundation, walls, roof, windows) modeled separately. Smooth animations showing the progressive assembly of these components. Step-by-Step Assembly Simulation: Users can navigate through the building process step-by-step (e.g., click "Next Step" to add walls or "...

I'm seeking a proficient Python programmer who can leverage Google Gemini to programmatically answer a large number of mixed-type exam papers for me. Altogether I have 800 exam papers. The exam papers are in PDF format, and the response to the prompts or gemini outputs need to be copied and pasted into a Word document template I have. Currently a simple prompt such as 'answer the questions contained in this exam paper' and attaching the pdf file gives me what I need. Key Requirements: - Use Python and Google Gemini to automate the answering of exam papers - Handle mixed-type questions (multiple choice, essay type, etc.) - Transfer the answers into a Word document, following a specific naming convention: the output file should have the sa...

...dynamics simulation project. The primary focus will be on turbulence modeling. Ideal candidates should: - Have extensive experience with comsol, Autodesk CFD - Be proficient in turbulence modeling techniques - Have a solid understanding of fluid dynamics The project involves: - Utilizing Autodesk CFD for fluid dynamics simulations - Applying complexity to turbulence modeling - Generating high-quality meshes for simulation accuracy. - Validating simulation results with experimental data. - Defining and applying boundary conditions for the simulation. - Optimizing simulation performance for faster computational time. - Calibrating models to enhance simulation accuracy. - Analyzing flow patterns and characteristics using simulation data. ...

Complete CFD simulation of aerodynamic in cylinder head

I’m looking for someone who has knowledge of the LGS exam system or is willing and able to learn about it. We need help building an LGS calculator, and your role will include: • Finding or understanding how to get percentile data. • Explaining how percentile calculations are done. • Breaking down and explaining the formulas used for each calculation step. • Helping us ensure that the calculations match the real LGS scoring system. If you’re familiar with the LGS exam or confident you can learn how it works, and you can help us figure out these details, we’d love to work with you. This project requires attention to detail, some research, and a clear understanding of how LGS scores and percentiles are calculated. Let us know if you&rsq...

...Experience in SoC Integration, DFT lntegration across SoC. SoC architect and design using RiscV processors,AMBA AXl,AHB,APB,PCle, DMA IP Configuration and lntegration. And with Low speed peripherals like SPl,12C,UART,JTAG. Design and development using Verilog, System Verilog, Synopsys and Cadence tools. Matlab Modeling and Hardware software implementation of Signal Processing Algorithms. FPGA simulation and performance validation for signal processing ASIC. Firmware/Driver development using C language. The freelancer is expected to provide full-time commitment on this project. The freelancer should develop a prototype. The freelancer is expected to provide full-time commitment on this project for a duration of 6-12 months. The prototype should focus on developing an FPGA-bas...

...RECENT ATTEMPTED MCQS • Score history for each test taken. • Number of MCQs attempted, number correct, and improvement over time. • Average time spent per MCQ, if relevant. 3.4 Push Notifications: • Users receive push notifications for: • New test availability. • Reminders about the approaching exam date. • New study material uploads. • Promotional updates. 3.5 Timer (Days Left): • A red bar (or banner) always visible in the app (e.g., at the top or in the sidebar) showing the number of days left until the exam. • This value is updated from the admin panel. 3.6 Content Access & Restrictions: • Default free sections accessible to all. • Restricted sections prompt the user to enter a coupon if not previously aut...

...implementations. Design and develop solutions to meet project objectives. Lead and manage the timeline for major milestones, with the first key milestone (MTP) in March. Collaborate on building out the Student section of the system roadmap. Conduct end-to-end testing to ensure seamless implementation. Oversee the development of key modules, including: Course Approval Early Alert Course Changes Final Exam Scheduling Required Skills and Experience: 2-5 years of experience working with Workday Student and Workday Extend. In-depth knowledge of Workday Student, including course changes, project uploads, and creating new projects. Experience working in higher education environments (preferably in course management and administration). Preferred Qualifications: Experience working at a l...

I'm seeking a skilled Unity 3D developer with a strong background in creating educational simulations. The task is to develop realistic simulations covering Physics, Maths, and Chemistry aimed at high school students. Key Aspects of the Project: - The primary purpose of...reflect high school-level concepts in Physics, Maths, and Chemistry. - Experience in developing similar educational tools on Unity 3D is highly desirable. Ideal Skills and Experience: - Proficient in Unity 3D with a portfolio of similar projects. - Strong understanding of high school level Physics, Maths, and Chemistry. - Previous experience creating educational tools. - Excellent skills in simulation development with a focus on realism. - Creative thinker with an ability to make learning engaging throu...

Hi, I am a hobbyist looking for help designing an integrated 3D model of a mechanical flywheel and gears. I would ...I would supply a hand drafted picture of the device - I will provide step files of existing commercial components to incorporate - such as spur gears, hubs, shafts, bearings, frame, nuts/ bolts, etc and where i can, simple 2D CAD drawings (3D where possible) of components to be designed.  Final work product needs to be a full rendering of device, working simulation and CAM files for each designed component. LMK if you do working simulation? I use a simple CAD program for manufacturing parts (eMahineShop) and have used Fusion360 a bit, What is your availability and current rate? Look forward to hearing from you. Thanks The 3D model will be used for ...

I'm looking for an experienced AnyLogic simulation developer to create a simple simulation for a ship container dock. The focus of the project is primarily on estimating queue times with limited docking space in a port environment. Key Requirements: - The simulation should visualize a situation where only a limited number of docking spaces are available for ships. - Ships that arrive when all slots are occupied must wait for the docked ships to finish loading before they can take their turn. - A detailed animation of the loading process is required, showing every step of the process. - The simulation should include elements such as ship arrival patterns, variable loading times, and priority docking rules. This project is for a student reference to help u...

I'm seeking a professional...lecture-style, video-based study material for the GATE ECE exam. This project revolves around crafting high-quality, engaging content that can effectively cater to students preparing for this challenging test. Ideal skills and experience for the job include: - Expertise in Electrical and Communication Engineering - Experience in educational video content creation - Strong understanding of GATE exam format and requirements - Ability to break down complex concepts into understandable segments - Proficiency in video editing and production Your role will be to: - Develop comprehensive, GATE ECE focused study material - Create engaging, lecture-style videos that convey the material effectively - Ensure content is suitable for the intended audien...

I'm looking for a developer to create a Telegram web app that mirrors the functionalities of the Tron mining app. Key Functionalities: - User Authentication: The app should have a secure and seamless user authentication process. - Mining Simulation: This feature will simulate the mining process for users, offering an engaging experience. - Rewards and Payouts: The app should have a system in place for distributing rewards and payouts based on user activity. - Admin Dashboard: A dedicated admin dashboard for monitoring user activity and managing the app. - User Notifications: Implement a system for sending notifications to users about their mining status and rewards. - Referral Program: A referral program that rewards users for inviting others to join the app. - API Integration...

I'm looking for an expert who can create a simulation circuit schematic of a power controller in Proteus for me. The main requirements for the project are: - The circuit must operate according to specific rules related to operational efficiency. - It must adhere to energy efficiency standards. Ideal skills for this job include: - Proficiency in Proteus software. - Experience in designing power controller circuit schematics. - Strong understanding of operational efficiency guidelines and energy efficiency standards. - Strong knowledge on Arduino implementation and coding

...Follow-Up Calls: Practicing strategies for follow-up calls to maintain customer engagement. * Negotiation Tactics: Scenarios focused on developing negotiation skills for better deal closures. AI-Driven Personas * Dynamic responses based on user actions * Persona profiles with goals and pain points  Feedback (doesn’t need to be real time for the simulations)  * Tips during the simulation * Post-simulation performance review Gamification * Leaderboards * Scoring system * Badges and achievements Objection Handling Practice * Preloaded common objections * Scored responses Performance Metrics * Talk-to-listen ratio * Objection resolution time * Conversion rate Custom Scenarios * Industry-specific cases * Adjustable difficulty levels (Easy, M...

I am looking for an expert to help complete my college senior project titled ‘Simulation Driven Inventory Optimization through Digital Twin Integration’. The project involves deep understanding and knowledge in creating and integrating simulation models for inventory optimization. Due to a lack of supervision, I need assistance in implementing these components. Key Aspects of the Project: - Primarily focusing on integrating the digital twin - Utilizing AnyLogic as the primary software for the integration - Ensuring the digital twin's interaction with specific external systems, particularly database management systems Ideal Skills and Experience: - Proficiency in AnyLogic or any other software that are appropriate for the matter - Extensive experience in cr...

...interactive brain simulation app for both iOS and Android platforms. Key Features: - The app will allow users to tap on different parts of a realistic 3D brain model. - Upon selection of a specific brain area, the app should display that area's primary function and how it influences certain emotions. - The primary goal is to educate users on the connection between different parts of the brain and their everyday feelings. - Include information on neurotransmitters and their influence on brain function in the simulation. - Enable users to track their learning progress and revisit specific brain areas. - Offer the app in multiple languages to reach a broader audience specifically english and arabic. - Include information on common brain diseases and disorders in the ...

I'm in need of a seasoned developer with a strong background in graphics rendering. The project involves: - Developing a Simulation/Role-Playing game optimized for web browsers. - Creating intricate and engaging graphics that enhance gameplay. - Ensuring smooth performance across various web platforms. The ideal candidate will have a solid understanding of game mechanics, web optimization techniques, and a passion for creating immersive gaming experiences. Prior experience in developing simulation or role-playing games is a significant plus.

READ THE ENTIRE DESCRIPTION CHEAPEST BID GETS THE JOB Around 50 USD is the budget for this project SIMPLE EASY TASK TO BUILD RELATIONSHIP WITH A FREELANCER , BEFORE WE DO MORE PROJECTS. Need you to design and build a basic simulation (i.e., a virtual environment) and an intelligent virtual agent (e.g., a virtual robot that uses the virtual environment) that will plan routes through an environment, move along the planned routes and act and react to its environment. [You can use existing projects if need be as the basis for this task - you have free reign on everything for this task] You will have created a software simulator that simulates a virtual environment and an intelligent agent. You should build an autonomous intelligent agent using the module tools, namely, Unity and C#. ...

I am in need of a crash simulator focusing on vehicle collisions. The simulator should comprehensively address the following aspects: - Physics and dynamics: The simulator should accurately reflect real-world physics and dynamics as they pertain to vehicle collisio...should account for various driver responses and behaviors in the face of a collision. - Impact on vehicle structure: The simulator needs to represent how different collisions affect the structure of various vehicles. In terms of vehicle models, I require moderately detailed models with essential features. Ideal candidates for this project should have a strong background in vehicle dynamics, crash simulation, and driving behavior modeling. Experience in creating or working with moderately detailed vehicle models is als...

I...system, specifically a 'flying robot bird'. Key aspects of the project: - Comprehensive simulation of the flight dynamics of this mechanical 'bird'. - The ability to visualize and manipulate the system in MATLAB. - Understanding of control systems and signal processing to incorporate potential control mechanisms in the future. Ideal candidates for this project should have: - Proven experience in simulating mechanical systems in MATLAB. - Strong understanding of flight dynamics. - Experience working with control systems and signal processing. - Prior work involving robotic systems would be greatly appreciated. The simulation should focus on basic flight dynamics and simple control mechanisms. The simulation should be primarily aimed at suppor...

Hi Freelancers. I need a facebook creative to be designed for ad purposes. I need a simple and eye catchy design. See text below: StudyEdge AI- design high quality logo for this Launching the UK's first AI-driven Question Bank Platform for GCSE & A-Level Students 50,000+ Exam style questions with AI marking and personalised feedback All from just £4.99/month Launching Jan 2025- reserve your place below for free.

I'm seeking an editor for professional certification exam results. The task primarily involves altering the grades on a few instances. Ideal skills for this task include: - Attention to detail - Data handling proficiency - Experience with professional certification exams Please note, the number of grades to be changed is less than 10.

I need a detailed 3D CAD drawing of a consumer product for prototype development. This drawing should include high-resolution textures and exploded views...center. The insert is 1/2 inch (0.5 inches) in diameter and remains empty to house additional content like a rolled love note or a similar item. Key design features include: - Two-Part Construction: The container splits into top and bottom halves, ensuring accessibility and functionality. - Smooth Interior: The inner surface should be even to prevent snagging of contents. - Velvet Texture Simulation: While the final product will include velvet flocking, the prototype should simulate this texture for evaluation. - Prototyping Material: Sturdy but lightweight material, like PLA or ABS, should be used for accurate represent...

I am preparing for my GATE Exam and require expert tutoring in Engineering Economics//industrial engineering/civil engineering practice - Focus Area: I need help understanding and solving practical problems. - Goal: To improve my problem-solving skills in this area and increase my chances of success in the GATE Exam. The ideal freelancer for this project should have: - A PhD level understanding of Engineering Economics. - Proven experience in tutoring engineering students. - Excellent problem-solving skills. - Ability to break down complex concepts into easily understandable segments.

Need The Geometry Model For This Project CFD Analysis of a Swirl Combustor Burner Using ANSYS Objective: To analyze the flow, combustion, and thermal characteristics in a swirl combustor burner using ANSYS Fluent. This simulation will involve creating a complex 3D geometry, applying appropriate boundary conditions, and interpreting results related to turbulence, combustion, and thermal profiles. Problem Statement: Analyzing a swirl combustor burner commonly used in gas turbines. The burner must feature a central fuel injector surrounded by swirling air, designed to enhance mixing and combustion efficiency. Details of the Combustor Geometry: The combustor is a cylindrical chamber with swirling vanes for air injection and a central injector for the fuel stream. Key components a...

I'm seeking a skilled Matlab professional to help develop a simulation for electrical signals. Key Requirements: - Proficient in Matlab, with a focus on simulation - Experience with electrical signal simulations - Ability to deliver high-quality work within set deadlines - Strong problem-solving skills and attention to detail The project is focused on simulating electrical signals using Matlab. Ideally, you should have a strong background in electrical systems and be capable of creating complex, accurate simulations.

...minimize power losses, improve voltage stability, and enhance system reliability. I'm looking for a professional who can tackle these challenges and deliver a robust solution. Please provide the executable code along with the algorithm development. The project should be completed within 3 days. The primary success metric is the percentage reduction in power losses. Please include comprehensive simulation tests to validate the algorithm's performance. Include comments in the code, a brief readme file explaining the algorithm, and instructions on how to run the simulations. The algorithm should focus on large-scale distributed generator systems. Please provide results in the following format: Both would be great presentation with report." The algorithm should priori...

...following tasks: AC-DC Conversion System Design: Design and simulate a full-wave rectifier with filtering. DC-DC Converter 1 Design: Provide a stable 30V output with minimal voltage ripple. DC-DC Converter 2 Design: Provide a stable 500V output for EV battery charging. System Simulation: Simulate the entire system, analyze efficiency, harmonics, and power factor. Embedded Systems Application: Explain how embedded systems support the control unit. Requirements: MATLAB/Simulink expertise for circuit design and simulation. Detailed calculations, graphs, and professional documentation (max 20 pages). Completion within 4 days. Budget: $50 USD. If you are interested and can deliver high-quality work within this time frame, please apply. The full project description is attached...