Software & Hardware Electronics _ Dvp finalization & bug correction

$750-1500 USD

Cerrado

Publicado

hace más de 5 años

$750-1500 USD

Pagado a la entrega

Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its last stage of development before production. This project has a software and hardware. Both have to be worked on together. MCU is an 8 bit Microchip Attiny1616. Hardware: We need to add a new technical feature (vibration detection) and correct some issues. This feature will be based on an accelerometer (based on part similar to MEMS sensor LIS2HH12 from ST), correct some bugs on the PCB (high level of noise) Layout will have to be updated also. Software: Finalize the firmware of the MCU Create a fuzzy controller (rules to be provided) Update LEDs indication Update touches Prototyped PCB can be sent for development and testing. Selected candidate will be asked to provide a prototype and test its re-design. Prototyping capabilities (PCB manufacturing and assembly), testing (multimeter, oscilloscopes) are required. Detailed to-do-list will be provided to shortlisted candidates. Thanks for your proposal

Electrical Engineering

ID del proyecto: 21357158

Información sobre el proyecto

11 propuestas

Proyecto remoto

Activo hace 5 años

¿Buscas ganar dinero?

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

11 freelancers están ofertando un promedio de $1.141 USD por este trabajo

@sagradoamicus

Hi I am leading a team of professional engineers well versed in electronics product development. We have worked on different electronic products covering all the stages of development. We can validate your design. Please get in touch to discuss it further Regards

$1.125 USD en 7 días

4,8

(271 comentarios)

8,0

@hayat38402

We are a team of Electrical and Electronics engineers and we are Excellent in the following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently at a time. If you choose me, I think you won't regret. Best Regards.

$1.125 USD en 7 días

4,6

(63 comentarios)

6,1

@CoherentTech123

Dear Sir, I am an embedded systems expert with more than 15 years of experience in Product development from concept to working. I have experience in Prototyping and Engineering of the product. I am a resourceful Engineer with all the testing and debugging facilities at the signal/trace level. In addition to it I have a vast collection of Development tools and emulators for almost all MCUs. I have partners in Shenzhen China and I assure you complete help at all stages of your design and prototypes. I am online and available for discussion. I also assure you the most economical work with high quality. Regards Ch Talha

$750 USD en 30 días

4,5

(64 comentarios)

6,2

@DevStar925

Bandera de LAO PEOPLE'S DEMOCRATIC REPUBLIC

Hi, I'm very interested in your project as I have rich experience in embedded software development. I would like to discuss more details via chat. Thanks

$1.125 USD en 7 días

5,0

(8 comentarios)

5,4

@bulgar

Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We work exclusively with U.S. partners. We specialize in developing Embed systems based ST(STM32), Microchip (Atmel )(PICs,AVR,Atmel ARM) and TI (MSP430) MCPUs and peripheries. For our mobile devices useESP32 and nRF51/52xxx BLEs. We realize projects with requirements similar to yours. Our tools for design Atmel Attiny based systems are: Atmel Studio 7 IAR EW AVR Atmel ICE If we receive more information about your project, we will give you a real cost and time to implement your project. We based in Europe, not customs problems for delivery models and samples for testing. Best Valeri T.

$1.975 USD en 45 días

4,4

(14 comentarios)

6,0

@Ivan927

Hi. I am very interested in your project. i have rich experience on PCB and firmware programming. I think this project is very suitable for me and i am sure i can give you good result . If you award me for your project, you will get good result . please call me.

$750 USD en 7 días

4,8

(3 comentarios)

4,6

@HXElectronics

Hello, i am from Shenzhen China. i can design for you and test whole system. i have experience with this kind of design both software and hardware. i can provide you PCBA support also. Please take my interview

$1.125 USD en 7 días

3,5

(6 comentarios)

3,8

@JiangZhengHe

Hello. Thank you for the job posting As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 10+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - SolidWorks Enclosure, AutoCad design - 3D Modelling - Matlab simulation - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you.

$750 USD en 3 días