Esp32 arduino jobs
ESP32-CSI-Collection-and-Display I am looking for a developer to help me develop a new ESP32-CSI module. The desired outcome of the project is to create an open-source platform that the user be able to program the transmitters and receivers in order to be able to detect channel state information (CSI) including: phase, frequency, amplitude and display and record this data. So when a user connects an ESP32, choose the mode of operation (transmitter/receiver) and the corresponding code is loaded on the controller. All of the devices then should be connected to the same WiFi that host (platform) is connected to so that they can communicate with the platform. The transmitters should have the option to send beacon frame or data frames and the receiver based on the signal o...
Project Description: - I am looking for a freelancer who has experience with Arduino Uno microcontrollers and PCB design. - The primary function of the microcontroller in this project is something other than controlling pump or reading sensor data. - I do not require assistance with designing the PCB layout. - The ideal candidate should have a strong understanding of microcontroller programming and circuit design. - Experience with Arduino Mega and other microcontrollers is a plus. - Knowledge of PCB manufacturing and assembly processes is preferred. - Good communication skills and the ability to work independently are important for this project.
I need to modify some existing Arduino code for an Arduino Mega device. My project involves a complex set of processes that can be automated with the help of the right Arduino code. Working with Arduino has come as no surprise for me, but writing the code efficiently and accurately is the difficult part. I'm looking for an experienced freelance Arduino coder to revise the code and deliver a comprehensive tested product. Proficiency in coding with the Arduino Mega is required and a knowledge of previous code modifications is preferred. With the right person on board, my project can achieve the desired automation with precision and accuracy. See the attachment shows the main code in which i want modification. Particularly their is a turning par...
We would like some developer to do a small task of writing a code for esp32 , the code will scan all tuya devices on the local network , and reports back the status of each of the devices , this should be shown on Arduino serial monitor , you can take some references from tiny tuya as the functionality is similar. Kindly note that we need a functional code to process the payment ( the payment will be after the job is completed ). Skills and Experience: - Proficiency in Arduino programming and ESP32 - Experience in sensor monitoring and data logging - Knowledge of Tuya platform
I'm looking for a consultant who is an expert in writing Arduino code, specifically for code control of a stepper motor controller. I already have the stepper motor controller, so I am looking for someone to write code in C++ and C+ in order to control it. The project needs to be completed within 1-2 weeks. If you have experience in this field, and you can ensure that the project will be completed on time, then I look forward to hearing from you.
ESP32-CSI-Collection-and-Display I am looking for a developer to help me develop a new ESP32-CSI module. The desired outcome of the project is to create an open-source platform that the user be able to program the transmitters and receivers in order to be able to detect channel state information (CSI) including: phase, frequency, amplitude and display and record this data. So when a user connects an ESP32, choose the mode of operation (transmitter/receiver) and the corresponding code is loaded on the controller. All of the devices then should be connected to the same WiFi that host (platform) is connected to so that they can communicate with the platform. The transmitters should have the option to send beacon frame or data frames and the receiver based on the signal ...
I want to modify the smart burglar circuit i I got from the internet. We must use the reference circuit to modify it and build a new circuit using multisim/falsad/circuitday software. And I also need what components were added and what is their function in the new circuit. The new circuit should not be very complicated. We MUST not use any microcontrollers like esp or arduino in the new circuit. I will attach the reference circuit diagram with the citation. Pls refer to that circuit. I also need it as soon as possible. thank you
I want to modify the smart burglar circuit i I got from the internet. We must use the reference circuit to modify it and build a new circuit using multisim/falsad/circuitday software. And I also need what components were added and what is their function in the new circuit. The new circuit should not be very complicated. We MUST not use any microcontrollers like esp or arduino in the new circuit. I will attach the reference circuit diagram with the citation. Pls refer to that circuit. I also need it as soon as possible. thank you
I am looking for someone to change code in my esp32. I have the ide files etc, i have changed from a p100 max controller to ktype max controller, the test code works and configured already but just needs changing in the actual code for my app. Current Board: NodeMCU-32S New Board: This question was skipped Timeline: I need this project completed as soon as possible. Ideal Skills and Experience: - Strong knowledge and experience with ESP32 development - Proficiency in programming languages such as C++ and Arduino - Experience in board selection and integration - Ability to troubleshoot and debug code - Excellent communication skills and attention to detail
I am looking for a developer who can create a mobile app and write an Arduino code for controlling a lamp automatically. Mobile App Platform: Android - The app should be compatible with Android devices. Specific Features or Functionalities: - The client has a clear vision for the app's features and functionalities. Further details will be provided during the project discussion. Arduino Coding Experience: - The client has a beginner level of experience with Arduino coding. Ideal Skills and Experience: - Proficient in Android app development - Experience with Arduino coding - Knowledge of lamp control automation - Strong problem-solving skills - Good communication and collaboration skills
I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.
I am looking for an Arduino expert to help me with a sensor project. I am open to any model of Arduino and I need more than 7 sensors for my project. Skills and Experience: - Strong understanding of Arduino programming and electronics - Experience with sensor integration and calibration - Ability to design and build a circuit board for sensor connections - Knowledge of data analysis and visualization for sensor data Please provide examples of previous Arduino projects and any relevant certifications or qualifications.
I'm looking for help with an advanced programming task for an esp32 project using the Arduino platform. I'm an experienced developer and engineer in related fields, so I need someone with a specific set of skills and experience in working with the Arduino platform. The task will require the programmer to have a solid in-depth understanding of programming for the esp32 environment. This project is for a time-sensitive project, so I'm looking for someone who is available to start immediately, and who can stay dedicated and focused until the job is finished. I prefer someone with a history of successful projects and a portfolio showing their work. I'm prepared to pay a competitive rate for the right person or team.
...exact functionality required for our project. With the software completed and the firmware process developed, you are to assist our hardware developer in ensuring that the ESP32 microcontroller device is updated with the software and will connect seamlessly without errors to our IoT cloud server. An API will need to be developed that will integrate the data received from the device into our primary app to enable our users to view both real-time and historical data collected by the device. Your Responsibilities: • Software engineer Android mobile app software • Assist in the development and programming of the ESP32 microcontroller device with the updated software • Verify that firmware updates can be uploaded and received by the device and that they work ...
I am looking for a freelancer who can create an ESPHome yaml file for me to read/write CANbus messages. CANbus Device: I am using ESP32 with CANbus transceiver from Adafruit (product link: ). CANbus Messages: I specifically need to read/write CANbus messages from the battery and inverter. Frequency: I would like to read/write the CANbus messages once per second. Skills and Experience: - Proficiency in ESPHome, YAML and C++ - Experience with CANbus devices and protocols - Knowledge of reading and writing CANbus messages - Familiarity with the ESP32 If you have the necessary skills and experience, please bid on this project. Thank you!
Senior IoT Developer Needed for Custom IoT Project Skills and Experience: - Strong experience in developing IoT solutions using various platforms - Proficient in working with Arduino, Raspberry Pi, and other IoT platforms - In-depth knowledge of IoT protocols and communication technologies - Familiarity with both home automation and industrial automation projects - Ability to understand and implement custom requirements for IoT development - Proven track record of delivering projects within tight deadlines Project Requirements: - We are looking for a senior IoT developer to work on a custom IoT project. - The specific IoT platform to be used will be specified later. - The main purpose of the IoT development will also be specified later.. - The project must be completed within a mo...
An existing but partially non-functional PCB design should be revised so that it works. It is an NFC multiplexer based on an MFRC522 chipset and ESP32. However, using another NFC chipset such as PN532, PN5180 or similar would also be acceptable. Expert knowledge in the design of NFC antennas and their adaptation is necessary. Please submit your offers to me with proof of knowledge. Thanks !
I am looking for a freelancer who can help me w...signals using the SVM method in MATLAB. The purpose of this project is to develop a brain-computer interface. Requirements: - Experience in signal classification and feature extraction from EEG signals - Proficiency in MATLAB programming language - Knowledge of the SVM method for classification - I need results form of figures the signals , featues and in need 4 classes signals to supply it to the arduino circuit Project Details: - I have a specific dataset of EEG signals that need to be classified - I have Matlab code for feauters extraction - The task involves extracting features from the signals and using the SVM method to classify them into 4 different classes If you have the required skills and experience, please submit your...
I am looking for someone who can review an esp32 c3 mini circuit schematic for me. The complexity level of the circuit schematics is Intermediate but also small and I require recommendations for improvements only if there are any critical issues found. The turnaround time I am expecting for this project is 1-2 days. The successful freelancer must be knowledgeable in electrical engineering, understand schematic symbols and basic conventions, and have experience in schematic design. I am looking for someone with the ability to critically analyze and decipher schematic diagrams. I expect a thorough review of my small project; a full report on any issues identified should be provided. This is an excellent opportunity to utilize your electrical engineering background in a short-term, f...
I will do the nextion and arduino code . also provide the connection diagram
I am looking for an experienced freelancer to integrate an existing BACnet Protocol Stack with an ESP32 board. This should be done within 2 weeks, and I have specific requirements for this project. This project requires experience with BACnet Protocol Stack development and optimization of existing code. This project should allow the ESP32 board to communicate with any BACnet enabled device with read and write capabilities. The project is for adding BACnet/IP functionality to our ESP32 board which currently acts as a data logger. We want to use the BACnet/IP functionality to pull data from or send data to a building automation system that is BACnet/IP enabled. I need a freelancer who is confident in their ability to quickly and thoroughly complete this project.
Project Title: Beginner Circuit Design Learning Activity for Arduino Description: I am looking for a freelancer who can assist me in a beginner-level circuit design learning activity for Arduino. The main focus of this project is to provide hands-on experience in circuit design using Arduino. Specific Requirements: - The freelancer should have a strong understanding of Arduino and circuit design principles. - Experience in teaching or guiding beginners in circuit design is highly preferred. - Knowledge of basic electronic components and their integration with Arduino is required. Timeline: - The project needs to be completed within 3 hours. Skills and Experience: - Proficiency in Arduino programming and circuit design. - Ability to explain comp...
I am looking for an Arduino coder, MQTT savvy who can assist with an expert level to work with me for this project and other projects expected to come in the futur. The actual projet is not complex, however, the requirements and complexity will increase over the coming months. Specifics: - The project initially involves an Arduino board acting as the Management module for a water treatment system. The module must take control of the following: - a water flow sensor, - a backup 12V battery to activate when the 110V or the 220V source goes down - an electrolysis module that must generate 2A and can adjust Voltage accordingly to maintain a stable 2A. - a lcd display the information - a connection to wifi/LoraWan/LTE for real time data transmission - a MQTT broker. I h...
I am looking for a developer with experience in FreeRTOS development on the ESP32 platform help us with development of new features for our gateway for real-time data monitoring and logging. This first project is meant as a kind of assesment. If the job is done we would like to extend the contract on a hourly rate base. Functionality: - Real-time data monitoring and logging - Loading data from external devices over different types of communication buses (ModBus, MeterBus, HTTP) - Wired and Wireless communication with other devices and our Cloud Platform using HTTP REST API and MQTT Hardware components: - Hardware is already done (ESP32 S3 based gateway with Meterbus and MBus interface) Communication protocol: - The desired communication protocol is HTTP(S)/MQTT for...
Project Title: Arduino Pixel Programmer Adafruit Introduction: I am looking for a freelancer who can assist me in programming an Arduino Pixel using Adafruit. This project is for personal use and I am expecting the completion within a week. Requirements: The ideal freelancer for this job should have the following skills and experience: - Past work: Please include examples of your past work with Arduino and Adafruit. This will help me assess your expertise and determine if you are the right fit for the project. - Experience: It is important that the freelancer has experience in programming Arduino and working with Adafruit. Familiarity with pixel programming is a plus. - Detailed project proposals: While not explicitly required, detailed project proposals ar...
I am looking for a skilled Arduino developer to modify an existing Arduino sketch for an ESP32 v3 board. The project requires the sketch to accept Http on/off commands through a Chirpstack server- LoraWan gateway- Node Specific functionality needed: - Modify Arduino sketch to accept Http on/off commands - Integrate with Chirpstack server Requirements: - Proficient in Arduino programming - Experience with ESP32 boards - Familiarity with LoRaWAN and Chirpstack server with Http API Timeline: - The project has a moderate timeline of 1 week. Please note: - I have a specific model of the ESP32 board that I will be using. - I am open to suggestions if you have any alternative ESP32 board recommendations. have successfully registered nod...
I am looking for a talented Arduino programmer to help me control my A/C and cooling fan using relays. The program needs to read data from 3 ds18b20 temperature sensors to determine how to regulate the cooling system. At this level of complexity, I expect that you have at least intermediate knowledge regarding programming Arduino boards. I am flexible with regards to timeline so you would have enough time to complete the project. If you have the skills and expertise to deliver the results I'm looking for, then contact me and let's discuss further. Thank you.
I have a project to collect and store indoor climate data such as temperature, humidity and CO2 levels using Arduino and a web interface. The Arduino model is flexible so I can use any model that suits my needs but the data should be collected and sent to the web interface every 15 minutes. The data should include all of the measurements listed in the initial question (temperature, humidity and CO2 levels) as well as sound. All data should then be stored and accessible through the web interface to provide detailed information about the indoor environment.
A flyback boost circuit that needs to be fixed as I cannot get the simulation to work. Should be constant current. Amplitude - between .2 - 20mA Channel gros on off at 2kHz. Enable is on. Open drain has to be closed by the uP. V_SYS is at 5.1V. HV at 140V I2C sets the ePot resistance Current path from the ring finger to the thumb. Driven by an ESP32 For chronic pain. End waveform
...and assemble a digital number display project featuring a small 7 segment LED display, an Arduino Nano, a rotary encoder with switch, an On/Off Switch, a dimming rotary encoder and a 3V button battery. The LED display will be able to show a number from 0000 to 9999. The size of the 7 segment LED display is small, so please keep that in mind while designing. I'm open to either incremental or absolute rotary encoders, so take your pick. As for the programming language used for the Arduino Nano, I have no preference - pick whichever works best for you. This project should be straightforward, so please quote your best price. Thanks! Digital Number Display Parts: 4 digit 7 segment led display (small) Arduino nano Rotary encoder with switch On / Off Switch Dimming...
Hi Bohdana K., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
Need to create a blueprint and program in Unreal Engine 5.1.1 with the ESP32-WROOM-32E and MPU-6050 inertial measurement unit sensor to display, read, and orientate arm movement using SerialCOM. WIFI or Bluetooth application is not needed.
I need and Arduino serial frame sender to handle 12 slave drivers on a 7 segments LED sign, the values are setted by an Android app
Hello, I’m looking for a freelancer based in Chennai to make a thrust stand based on Arduino. You need to have experience in Arduino programming and PCB design. The objective is to make a thrust stand for brushless motor similar to
...is the github project: Currently cannot be compiled. I only need few things done with it: 1. Fix the project so it can be compiled and uploaded to real hardware 2. Add ability to change hostname to the "Setup" page from "ESPReflow" to something else since multiple of ESP32 will be on the same network and I don't want name conflict. 3. I want all the updates source files so I can compile it further on my PC. Thank you ESP32 Board used: https://www.amazon.co.jp/gp/product/B08PB3SBQX/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Breakout Board Used: https://www.amazon.co.jp/gp/product/B092H9FM3R/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Thermocouple controller: https://www.amazon.co.jp/gp/product/B092ZCSM7J/ref=ppx_yo_dt_b_asin_t...
i need to write an arduno code to let esp32 measure 5 PWM inputs and show the frequency and duty cycle of each input. Also be able to generate 5 PWM outputs each with it's freq and duty cycle, you can show the results on serial monitor. I need a code to do it in 3 separate methods 1- Timer interrupt 3- pcnt counter 3- mcpwm
Complete a Arduino Audio DSP project which is designed to process audio and apply functionalities like equalizing and effects from GIT library Audio-Tools. The detailed requirement and existing project is provided in files section. The TestCase is also applied. Its needed to test with real hardware board, which is mainly just an ESP32 WROVER.
i need to write an arduno code to let esp32 measure 5 PWM inputs and show the frequency and duty cycle of each input. Also be able to generate 5 PWM outputs each with it's freq and duty cycle, you can show the results on serial monitor. I need a code to do it in 3 separate methods 1- Timer interrupt 3- pcnt counter 3- mcpwm
We have to write the firmware of a microcontroller project along with PCB design . Programming is done in c or c++ , no micro python. Write the central on esp32 and peripheral on NRF52 and update the json . More details will be shared with selected candidate.
HELLO, I AM LOOKING FOR SOMEONE TO MAKE A ARDUINO DUE CAN BUS PROJECT. I NEED THE ARDUINO DUE TO RECIEVE AN EXTENDED ID CAN MESSAGE AND TURN ON A GPIO PIN ACCORDING TO THE BIT.
HELLO, I NEED SOMEONE TO MAKE A PROJECT FOR ARDUINO DUE IN WHICH THE ARDUINO RECIEVES A SPECIFIC EXTENDED ID CAN MESSAGE AND SENDS OUT DIFFERENT GPIO OUTPUTS ACCORDING TO BITS.
I need an experienced electronic engineer, that knows about Arduino, and manufacturing in China. For prototyping and small batches. For discussions on my project, pay per hour for your advice. Know about eagle cad design, Alibaba. Thanks
I am looking for a skilled developer to create a full stack website on the MERN stack. The website will be an online electronics store, similar to , selling products like Arduino, motors, batteries, ESP modules, and more. Initially, the website will feature products from 1-2 stores located in Bhubaneswar. Timeline: The desired timeline for completing the website is less than 15 days( upto 16th Nov 2023) Features: The website should have the following specific features: - Product search functionality to allow users to easily find the electronics they are looking for. - Payment Gateway for users - Add to Cart feature. - Contact Us page Design Aesthetic: The client prefers a classic and traditional design aesthetic for the website.
...announce an incredible opportunity for an experienced Arduino specialist to join our team for a unique project. We're in the process of crafting an interior design masterpiece for the Bharat SaaS Yatra, which includes the creation of an impressive SaaS museum. In this role, you'll play a pivotal role in bringing our vision to life by contributing your Arduino expertise. Your work will be central to our goal of creating an immersive and innovative experience for museum visitors. Specifically, you'll be responsible for designing and implementing Arduino-based solutions that enhance the museum's aesthetic and functionality. This could include interactive exhibits, lighting, and display automation, or other creative applications of Arduino t...
...involving Simulink and Arduino communication. The purpose of this communication is to achieve bi-directional communication for real-time control. Requirements: - Experience with Simulink and Arduino communication - we have 18 motors and want to change direction and motor speed. - we do not need arduino algorith for the control, just need communication. - Each motor has 5 data related motor speed, current, direction and etc as integer. - Knowledge of how to control Arduino outputs based on Simulink inputs - Familiarity with bi-directional communication for real-time control Hardware: - The client has specified that they have a specific hardware model of Arduino. Documentation: - The client requires detailed step-by-step instructions for the project...
I am looking for an experienced Arduino programmer and board developer who can help me fetch RS485 data to an app. Programming Language: Python - I prefer to use Python for the programming language on the Arduino board. Data to Fetch: - I need to fetch the following data using RS485: Current, Voltage, start, stop, and run feedback. App Requirements: - I have a rough idea of the app I want to use to fetch the RS485 data. - I am open to suggestions and recommendations for the app. Ideal Skills and Experience: - Strong experience in Arduino programming and board development. - Proficiency in Python programming language. - Familiarity with RS485 communication protocol. - Ability to develop an app to fetch data from the Arduino board. If you have the required ...
We have a data logging software on windows C# that we use it with arduino normally, AND NOW, we want to use STM32 bluepill(or blackpill) and our software adaptation. Please read carefully below explanation and give your price. Dont waste our time if you dont have stm32 project experiences. 1- STM32 bluepill or blackpill will be used. 2- 8CH STM32's ADC Reading and sending via COM port to the computer and see values on our software. 3- ADC reading and data sending speed 50k samples for each channel. Total 400k sampling in a second. 4- All STM32 cube and Keil codes will be given and all codes have to have explanations. 5- We have a C# based Windows software. Now, our software can not get data over 5000 samples. Our software will be UPDATED. I will share our software's C# S...
I am seeking an experienced freelancer to develop a QR-Controlled Lighting & Access System using a microcontroller or Raspberry Pi. The system will have both lighting control and access control functionalities. Skills and Experience Required: • Proficiency in programming microcontrollers (Arduino, ESP8266) or Raspberry Pi • Strong knowledge of QR code technology and integration • Experience in designing and implementing access control systems • Familiarity with lighting control protocols and systems • Ability to handle multiple access points (more than 7) in the system Requirements: - Individualized QR code operation for 12-court lighting: The proposed system utilizes unique QR codes assigned to each member. These QR codes, when scanned, will individ...
Seeking a proficient freelancer to collaborate on the development of a digital assistant using an ESP32 microcontroller. The digital assistant will perform a range of tasks while a button is pressed, providing a versatile and interactive user experience. Functionalities: Audio Recording: Enable the ESP32 to record audio from a connected microphone while a button is pressed. Speech-to-Text (STT): Implement the capability to send the recorded audio file to Google's Speech-to-Text service and receive the transcribed text as a response. Natural Language Processing (NLP): Incorporate the ability to send the transcribed text, along with a personality header and history, to an NLP model like GPT-3 (ChatGPT) and obtain a coherent and context-aware respons...
