Voltage measurement microcontrollertrabajos

We want to improve all measurement aspects of 2 websites, to have better optimization, performance and general score in Google pagespeed, and reach performance values ​​above 80. The websites are the following /

I'm developing a gateway station that receives data over RF from sensor-stations, and send this data to a cloud via WiFi. I need to do 2 improvements to it. On one hand, I need to control a wifi modem. turn it on and off every time the the GW sends new data to the cloud. On the other, I'm using the LM2596 as voltage regulator. It goes from the 12V supplied by a solar panel to stable 5 volts, this supplies the wifi modem and other route goes to a LDO-3.3V. I don't want to use the module () anymore and embed it to the PCB as a fixed-5V circuit. So i Ask for: 1. Add a transistor circuit to supply 5V to the modem (from the lm2596 regulator) when the ESP32's GPIO commands. Add it to the

El trabajo consiste en hacer que una placa NodeMCU ES...especificaciones del sensor provistas en el manual son las siguientes: - Wind Speed Sensor Anemometer Three Cups Aluminium Alloyed pulse signal output with 3m. cable - Output signal: pulse signal output - Start-up wind speed: 0.4-0.8 m/s - Resolution: 0.1 m/s - Measuring range: 0-30 m/s - Transmission medium: Cable transmission - Connection mode: three-wire system - Supply voltage: DC 12-24 V - Max. Power consumption ≤0.2 W (pulse); ≤0.3 W (voltage), ≤0.7 W (current) El link del sensor donde se podrán ver mas características es: :g:ITwAAOSwmi1evLTe Datasheet (imagen) de la NodeMCU v3 adjunta.

Necesito el esquema y el listado de mínimos componentes electrónicos necesarios para que una placa NodeMCU ESP...especificaciones del manual del sensor son las siguientes: - Wind Speed Sensor Anemometer Three Cups Aluminium Alloyed pulse signal output with 3m. cable - Output signal: pulse signal output - Start-up wind speed: 0.4-0.8 m/s - Resolution: 0.1 m/s - Measuring range: 0-30 m/s - Transmission medium: Cable transmission - Connection mode: three-wire system - Supply voltage: DC 12-24 V - Max. Power consumption ≤0.2 W (pulse); ≤0.3 W (voltage), ≤0.7 W (current) El link del sensor donde se podrán ver mas características es: :g:ITwAAOSwmi1evLTe

Se pretende desarrollar una aplicación sobre Orange Pi R1 para el control y monitoreo de: - Controlar la propia Orange PI, IP de los puertos ethernet, wifi etc. - Niveles de tintas de las máquinas, esto será por unos sensores(finales de carrera) - Contadores de Impresión, será por protocolo SNMP - Errores varios de las máquinas, será pro protocolo SNMP Se debe diseñar la...monitoreo de: - Controlar la propia Orange PI, IP de los puertos ethernet, wifi etc. - Niveles de tintas de las máquinas, esto será por unos sensores(finales de carrera) - Contadores de Impresión, será por protocolo SNMP - Errores varios de las máquinas, será pro protocolo SNMP Se debe diseñar la placa secun...

...and I don't know the amperage it's set at. I changed the motors to 600 volts and the amperage becomes lower so the control is not sending the lower amp and still keeps pushing the material instead of slowing down or giving a 5 second break. Because it keeps pushing the rotor binds up can't chew fast enough then it hits the shut off switch and the machine shuts down Can anyone help Higher the voltage lower the amperage? Please let me know ASAP BTW: This is all very new to me (I am just trying to help out a friend) Let me know if you need any additional information I will get it for you as well as your rates and what equitpent I will require unless there is some local in Toronto! Jeff...

Necesito que crees una manera de traspasar masivamente archivos (matrices de precios) desde Excel a PHP y a su ves enlazarlo al un plugin que describo en el siguiente enlace. Éste plugin cuenta con la función, pero de modo manual. La problemática es que los productos tienen muchas variaciones por lo tanto son cientos de tablas (matrices de precios ancho x alto dentro de un rango para entregar un valor definido). Mis tablas son casi idénticas al ejemplo que dejé en el link anterior. Acá se muestra un ejemplo real del plugin en uso: Una vez esto funcionando ok

...con la naturaleza. Se necesita de una medida de 3,5 cm aprox, ademas de un logo para redes sociales (instagram). Sería ideal que pudiera crear un nombre relacionado a productos de cuero hechos a mano. ************************* I need them to create a logo for a brand of leather products (bags, accessories, etc.). This must have a deer, focusing on its horns and something related to nature. A measurement of approximately 3.5 cm is required, in addition to a logo for social networks (instagram). It would be ideal if you could create a name related to handmade leather products....

Hola necesito un diseño para el nombre de un movimiento político juvenil. Nombre: Voltage Slogan: Unión de Impacto por el Cambio. Me gustaria que el diseño fuera alusivo al nombre en si, he subido varias muestras, y veo que se puede jugar mucho con el nombre. Me gustaria que el diseño fuera compatible con varios colores de fondo.

and build an IoT device through commercial Arduino i.e. ESP32 modules with wireless modules + control module + storage module (They can be those offered by Aliexpress or Amazon). 2. It must have temperature inputs, gas sensor (only for alarm), presence or movement sensor, measurement of 1, 2 or 3 phases of current with CT from 10 to 100A. and voltage measurement. 3. You must allow to store the temperature and current data for minutes and hours and corresponding date. 4. The data must be stored in the memory or module with microSD. 5. You must allow to extract the data through the USB port and through the WIFI module with an interface that connects to a database on the WEB. Or via Bluetooth or WIFI with an App from the cell phone. 5. You must have a solid state r...

...there are three focused businesses that will be developed separately, then we will try to put them together, but first the most profitable, I advance directly the second phase of the project: it would be to improve an investor Off grid (already working at home) would consist in taking the signals coming from an RJ9 output, monitoring via web server or app its most important data such as on / off voltage, current and battery. the second stage of this part of the development if everything goes well, would be the possibility of greater IOT control, with arduino or rasperry although that depending if it is worth it due to the costs and who has a know how to achieve it in a prudential time, please, the interested ones tell me what experience they have with these technologies and with ...

Prototype Unit, using Microcontroller or Arduino, to control the delivery of CO2 gas, through a solenoid valve, according to the supplied protocols of Volume and dispatch time. Development of the programming software of the PIC or Arduino.

... Introducción a la ingeniería biomédica Introduction to Biomedical Instrumentation_ The Technology of Patient Care (2009) An Introduction to Biomedical Instrumentation (1976) Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation Medical Instrumentation Application and Design, 4th Edition (2009) Measurement, Instrumentation, and Sensors Handbook_ Electromagnetic, Optical, Radiation, Chemical, and Biomedical Measurement ...

Captación de proyectos de automatización (Adquision de datos, SCADA, Microcontroller) y clientes potenciales, para la industria, particularmente Food&Beverage.

...una tienda <strong>Woocommerce</strong>, nuestros productos tienen un precio en función a diferentes variables:<br />Tamaño, acabado, instalación, disponibilidad de archivo (vectorial o no)<br /><br />He probado varios plugin, pero necesito de dos a la vez, y no trabajan conjuntamente bien pues crean errores.<br />Hay un plugin instalado para el calculo de los metros totales (<em>WooCommerce Measurement Price Calculator de Sky Berger</em>), el cual multiplica Ancho por alto (el tamaño de una gráfica tipo mural) y el resultado lo divido entre 10.000 para sacar los metros cuadrados. En función a los metros cuadrados el plugin me permite definir un Tabla de precios (un rango de p...

CREATE A TOOL TO RECEIVE INFORMATION FROM SUPPLIERS ACTIONS AND PERSONAL CUSTOMERS VIA PHONE, MAIL physically FedEx courier or general information to initiate an action derived from company, orient YOUR Launchpad, COPY TO TWO LEVELS AND SUPEVISION register it in SU (S) BASE (S) FOR DATA. To follow up, measurement and statistics. BRINGING IT ALL TO A WEB WITH ALL TRADE Items page. CREAR UNA HERRAMIENTA QUE RECIBA INFORMACION DE ACCIONES PROVENIENTES DE CLIENTES PROVEEDORES Y PERSONAL VIA TELEFONO, MAIL, FISICAMENTE , MENSAJERIA FEDEX O INFORMACION EN GENERAL PARA INICIAR UNA ACCION DERIVADA DE LA EMPRESA, ORIENTARLA A SU AREA DE EJECUCION , COPIAR A DOS NIVELES DE SUPEVISION Y REGISTRARLA EN SU (S) BASE (S) DE DATOS CORRESPONDIENTES. PARA DAR SEGUIMIENTO, MEDICION Y E...

We offer a Digsilent Powerfactory modelling project to an experienced freelance with skills in DigSilent modelling of a medium voltage windturbine connection. Ofrecemos un proyecto de modelización con DigSIlenjt PowerFactory a freelnce con experiencia en el programa DigSilent para modelizar la conexión a media potencia de un aerogenerador.

I'm looking for an expert to design an automatic measurement device for scientific research. The device has a reflective sample (a mirror or a piece of a silicon stamp) that rotates around a VCSEL. Key Requirements: - The reflective sample must meet specific size and dimension criteria, as well as certain reflectivity and material property specifications. - The device must be capable of taking precise measurements of temperature fluctuations during the experiment. Ideal Skills: - Proficiency in design and engineering of measurement devices. - Prior experience with VCSEL technology and reflective samples. - Strong understanding of scientific research requirements and measurement accuracy. I would appreciate bids from freelancers with a proven track record in sim...

I'm looking for someone to summarize all item measurements for me, similar to the highlighted example. In that example, 4 items were clearly extracted. Key tasks include: - Summarizing item measurements in a Table format - Focusing specifically on 'Quantities' - Manually searching for additional item measurements for any constructs that currently lack them Ideal skills for the job: - Strong attention to detail - Experience with data analysis and summarization - Ability to conduct thorough manual searches Please note, the measurements will need to be presented in a table format. I'm looking for someone who can replicate the clarity of the highlighted example.

I need a skilled programmer from Bengaluru to help code a microcontroller for an exciting project. The microcontroller will be responsible for integrating various modules and communicating with an Android application. Key Responsibilities: - Coding the microcontroller to process sensor data, control motors, and implement communication protocols - Ensuring seamless integration of a variety of modules including sensors, actuators, and wireless communication modules, as well as GSM and GPS - Utilizing a proximity sensor within the microcontroller's tasks Ideal Skills and Experience: - Extensive knowledge and experience in microcontroller programming - Proficiency in integrating and coding for various modules - Prior experience in Android communication prot...

I'm looking to hire someone to work on a little experimentation project. The project includes programming with Arduino and synth sequencers. The primary function of this system will be to control the speeds of a stepper motor from a control voltage synth sequencer through Arduino. The project requires: - The ability to design and implement a system with arduino that can control a step-motor and use components such as quadrature encoders and switches. - The capability to create a system that allows for CV control from a synth sequencer. Thanks for your attention and looking forward to hear from one of you. Best greetings to you all

...high voltage power supply, akin to the Gambetti LF-500. This project has two phases: initially creating a laboratory version for testing and validation, and subsequently designing a board-level version for a new product. The AC output of this power supply will be utilized to generate a plasma discharge in an aerated water mixture. Key tasks include: - Developing a usable laboratory version of the power supply - Designing a board-level version for product integration - Ensuring the AC output is suitable for plasma generation The initial laboratory version will need to meet the exact specifications of the LF-500. Safety features are crucial, with both overload and short-circuit protection required. Ideal candidates for this project should have: - Extensive experience in high ...

I'm working on a project involving a vehicle speed detection system. This system should be integrated with an Arduino microcontroller and use induction loop technology. The target vehicles will be toy-sized cars. The main tasks for this project include: - Detecting and calculating the speed of the toy cars passing over the induction loop. - Outputting the speed data and triggering a single LED to flash when a predefined speed threshold is exceeded. - The speed threshold will be a fixed value defined in the code. The ideal freelancer for this project should have a strong background in electronics, specifically with Arduino and induction loop technology. Experience with speed detection systems will be a plus. I am looking for someone who can deliver a reliable and accurate spee...

I'm looking for an expert in electronics who can design a RGB LED circuit board for a custom electronics project. Key Requirements: - The circuit board will control a 12x12 inch matrix of dot LEDs - The control will be via a microcontroller, specifically an Arduino or Raspberry Pi or Teensy 4.1 Ideal Skills: - Expertise in circuit design and microcontroller programming - Experience with RGB LED projects - Ability to create a 12x12 inch matrix of dot LEDs

Please see attached image ….. I'm seeking an experienced AutoCAD and Lisp professional who can create a customized Lisp program for AutoCAD. The Lisp's main function would be to measure total polylines within engineering designs. Key responsibilities: - Develop a unique Lisp program to facilitate the measurement of total polylines in engineering designs. - Ensure the program is user-friendly and efficient, streamlining the drawing process. - Provide support for any potential issues or questions post-delivery. Ideal candidates will have: - A strong background in AutoCAD and Lisp programming. - Previous experience with creating custom AutoCAD functions. - Understanding of engineering design principles. - Excellent problem-solving skills. I look forward to seeing y...

I need a skilled programmer to create a PLC program for a Siemens controlled conveyor and 3D laser system. The 3D laser will be used for quality inspection and dimension measurement. Ideal Skills: - Proficient in Siemens PLC programming - Experienced with conveyor systems - Familiar with 3D laser integration - Knowledgeable in quality inspection processes - Able to develop programs for dimension measurement Please include examples of similar projects you've completed in your proposal.

I'm seeking a skilled freelancer with IoT, embedded programming, and API development experience to help build an innovative Battery Management System (BMS) for Lithium-ion batteries. The hardware will be ...damaged cells in real-time. - Monitor and display the battery output performance. - Track and alert for overcharging or undercharging events. - Include standard features typically available in advanced BMS solutions. Communication Protocol: The BMS will use Bluetooth for communication. Real-time Data Metrics: The system needs to monitor and display all critical metrics, including: - Battery voltage - Battery temperature - State of charge If you have the skills and experience to bring this project to life, please submit your proposal along with your portfolio. Let’s...

...module connection. One RS485 communication port. One MDR 26-pin SCSI Servo Connector (welded plate, female). 2. RF Signal Generators: Three independent RF generators with the following specs: Frequency range: 2110–2170 MHz Output power: 20W Controlled via a NodeMCU or equivalent. 3. Controller: The system controller can utilize a NodeMCU or similar microcontroller for management and control. 4. Power Supply: Input voltage: 48V DC. Additional Requirements: The 10G Ethernet ports must provide basic functionality and ensure compatibility with SFP+ 10G Base LR modules. Minimum configuration options should be accessible through the RS485 port....

I'm experiencing issues with my power supply for an audio device. It is a Flyback design with three different output voltages (-16V, 16V and 48V), however, none of the voltage rails are working. First, i will provide the circuit. If there are no obvious faults, I can provide measurements at specific points of the circuit and follow your troubleshooting instructions! The ideal freelancer for this project would have: - Expertise in power supply design and troubleshooting - Experience working with audio device power supplies - Ability to diagnose and resolve issues related to power supply output I'm looking for a professional who can quickly and efficiently troubleshoot and rectify these issues. The job is done if the design works, or if we made significant improvements fi...

I will only respond to messages of proposals of solutions to described proble...professional to assist in configuring a battery storage system for a fast charging station. The objective is to design a charging station that can handle sudden 150kW power loads while maintaining compatibility with the low voltage grid. Key Responsibilities: - Configuration of a battery storage system that allows for rapid response to sudden power demands - Scope results for grid and BESS Ideal Skills and Experience: - Prior experience in designing and configuring battery storage systems for electric vehicle charging stations is highly desirable - Knowledge of low voltage grid requirements and fast charging technologies - Strong problem-solving skills and ability to think creatively to meet pr...

I'm looking for a skilled Excel professional to help automate my spreadsheet, which I've been manually updating with annual measurement data (3D coordinates). The spreadsheet involves regression analysis and generating charts. Key tasks that need automation: - Updating formulas: Currently, I have to re-input the formula to accommodate the new data each year. - Data input: I want it to be as simple as entering the new data and the spreadsheet updates itself. - Chart generation: The spreadsheet produces various charts from the data, which currently requires manual intervention. - Running regression analysis: The spreadsheet includes regression analysis which needs to be automated as well. Ideal skills for this project include: - Proficiency in Excel, especially with comple...

I'm working on an educational project involving the STM32F429 microcontroller, and I need assistance modifying a template for this. The project involves reading data from a DHT11 sensor, specifically both temperature and humidity, and sending this data over Bluetooth using an HC-05 module. Key requirements: - Modifying a template to read a DHT11 sensor - Sending data over Bluetooth using HC-05 module - Formatting the data as a formatted string for transmission Ideal skills and experience for this job: - Proficiency with STM32F429 microcontroller - Experience with DHT11 sensor and HC-05 module - Strong understanding of Bluetooth communication - Ability to work with educational project goals in mind - Experience in data formatting for transmission

I'm looking for a professional who can modify the existing firmware for mouse movements on an STM32 microcontroller. The exact requirements are listed in the attached document. Please review carefully and start your proposal with the keyword "MOUSE" to prove that you have read this brief properly.

I require comprehensive shop drawings for a fire alarm system in a commercial building. The drawings need to be fully annotated with specifications. Ideal Skills and Experience: - Proficient in creating detailed and annotated shop drawings - Familiar with fire alarm system specifications and requirements - Experience wo...shop drawings - Familiar with fire alarm system specifications and requirements - Experience working on commercial building projects - Ability to reference and utilize existing digital architectural plans The selected freelancer will need to leverage our existing architectural plans, which are available in digital format, to create the necessary shop drawings. Plans, Spec Sheets, battery calcs, voltage drops and all other items need to be attached t this permit ...

I'm seeking an expert in ESP32 microcontroller and MQTT Mosquitto Broker who can help me with a project aimed at remotely controlling appliances over Wi-Fi. Key Requirements: - Design and implement an ESP32 based system for remote control of appliances. - Integrate MQTT Mosquitto Broker for communication management. - Ensure Wi-Fi is utilized as the main communication method. Ideal Skills and Experience: - Proficient in programming and working with ESP32. - Strong understanding and experience with MQTT Mosquitto Broker. - Prior experience with home automation projects would be a plus.

...the following features: Fabric Photos – High-resolution images of fabric options. Model Photos – Display of how the clothing looks on models. How-to Videos – Embedded tutorial videos for users to understand the process. Customization Features – Allow customers to modify designs, styles, or add-ons. Personalization Features – Enable users to personalize with monograms, embroidery, etc. Self-Measurement Feature – A step-by-step guide for users to input their own measurements. Shopping Cart & Checkout – A seamless shopping and checkout experience. Customer Panel – A user-friendly dashboard to view orders, measurements, and saved designs. Admin Panel – A comprehensive admin panel for managing products, orders, and user data. ...

I'm in need of a seasoned professional to guide me in the creation of an educational, intermediate-level embedded system project. The core of the project is integrating EMG and MAX30100 sensors to an Atmega32 microcontroller, coupled with an LCD and a Bluetooth module. Key Components: - EMG and MAX30100 sensors - Atmega32 microcontroller - LCD display - Bluetooth module The primary educational focus of this project revolves around microcontroller programming. Therefore, the ideal candidate must be highly proficient in C programming, with a deep understanding of microcontroller programming and prior experience with embedded systems. A passion for teaching and sharing knowledge in this field would significantly enhance the project. Deliverables: The main ...

...Facebook, Twitter, and LinkedIn. Organize press trips, brand launches, and travel events. Represent the brand at travel expos, fairs, and industry conferences. Collaboration: Align PR strategies with SEO and marketing teams for online growth. Create backlinks through collaborations with travel websites and bloggers. Manage brand reputation and proactively address potential issues. Performance Measurement: Track KPIs: website traffic, media impressions, and social media engagement. Provide monthly performance reports and actionable insights. Requirements for Agency: Proven expertise in promoting travel-related businesses. Strong media contacts in the travel and hospitality sectors. Experience in digital marketing, influencer collaborations, and content creation. Excellent commu...

I'm looking to create a detailed billing and body measurements debug paper. It will involve a comprehensive list of body measurements along with simple graphics. Key Requirements: - Incorporate a variety of body measurements including height, weight, chest, waist, hip, arm, leg, neck, shoulder, armpit circle, biceps, sleeve length, sleeve width, pocket etc. - Use icons and symbols as the primary type of graphics, all kept simple and easy to understand. Ideal Skills: - Graphic Design - Attention to Detail - Proficiency in Creating Clear, Understandable Layouts

I'm seeking a designer to create a minimalist logo for my electrical and low voltage company, Justin Time Networks. The design should be sleek, simple, and modern, reflecting the minimalist style. The logo doesn't need to incorporate any specific symbols or icons, but it should be memorable and represent the nature of the business. Ideal skills and experience for the job: - Proficiency in graphic design software - Strong portfolio of minimalist design - Experience in creating logos - Understanding of branding for electrical companies - Ability to deliver high-quality, original work

I need a tech pack designed for both men and women's activewear that I can provide to our manufacturer. The tech pack should include T-shirts, Leggings, Jackets, Men's Shorts, Hoodies, Sports Bras, Women's Shorts, Women's Short Tights, and Men and Women's Joggers. The tech pack should also include main fabric measurement points that clearly outline details of each item. It is crucial that the points of measuring are tailored to suit a body type. Ideal skills for this job include: - Experience in fashion design, particularly activewear - Proficiency in creating detailed tech packs - Understanding of manufacturing processes - Ability to design for diverse body types The designs need to be more in-depth and customisable so we can optimise our production.

Por favor, regístrate o inicia sesión para ver los detalles.

...MIKROE Balancer 5 click. () Key Requirements: - Charging condition: Need to charge two separate single cell battery of 2000mah via USB charging of around 5V 3A. - For each individual cell, the max charging voltage should be 4.2V and the maximum charging current for each battery should be 1A. - The code should allow for automatic initiation of the charging process. - Enable cell balancing to maintain cell voltage equality. - Implement fault recovery (e.g., reduce current, stop charging). - Adjust charge current/voltage based on: Temperature (via NTC pin), Input power availability. - Read system status flags - Experience with Arduino and BQ25887 IC is essential. Ideal Skills: - Proficiency in Arduino programming. - Prior experience with BQ25887 USB charging

I'm seeking an expert to analyze the impact of Gaussian measurement noise on the accuracy of estimating parameters from a second order equivalent circuit model. The primary focus will be on estimating resistance and capacitance. Key components of the project: - Assess the influence of Gaussian noise on model parameter estimation. - Explore the efficacy of the Kalman filter in mitigating the effects of this noise. Ideal candidates will have: - Strong background in circuit modeling. - Proficiency in noise analysis and filtering techniques, especially the Kalman filter. - Experience with parameter estimation of circuit components.

I'm seeking an expert in circuit design, PCB creation, and programming for an NXP Battery Sensor tailored for an automotive application. Key Requirements: - Full design and programming of the NXP Battery Sensor with CAN and LIN MM9Z1_638. - Implementation of only the LIN (Local Interconnect Network) interface. - Support for specific functionalities: Voltage monitoring, Temperature sensing, and Current measurement. Ideal Skills and Experience: - Extensive knowledge in automotive sensor design. - Proficient in designing circuits and PCBs. - Experienced in programming for NXP components. - Familiar with LIN interface implementation.

...Functions: The device should record audio when a button is pressed. The playback should be triggered by an interrupt (via I2C). Audio Quality: The audio resolution should be at least 16-bit for high-quality recording and playback. Audio Alerts: The device should emit audio alerts in the following scenarios: When recording starts. When recording ends. When the battery is low. Power Efficiency: The microcontroller must support sleep mode to save power. The device should operate on 3 AAA batteries, using low-cost and power-efficient components. Trigger by Event: The device should remain in sleep mode until activated by an I2C interrupt. Hardware Testing: The designer must be able to personally test the circuit and hardware and perform experiments to ensure proper functionality. Addi...

I'm looking for an experienced LabVIEW programmer to expand my partially completed software. The project involves controlling a VFD and braking system using an Advantch USB controller 5801. Key Tasks: 1. Programming VFD sp...user to set operation cycles from 1 to 10. 6. Generating comprehensive reports of all sensor data with specified metadata. Requirements: - Proficient in LabVIEW programming - Experience with VFD and braking system controls - Familiarity with Advantch USB controller 5801 - Ability to integrate specific measurement units for sensors - Capable of creating user-friendly interface for setting operation cycles and displaying data - Competent in report generation I will provide specific measurement units for each sensor's data. Your task will be to...

Por favor, regístrate o inicia sesión para ver los detalles.

Looking for professionnal PCB rooting expert to make the rooting of a High power / High voltage PCB rooting . Schematic design is provided with specifications for rooting . The EMC constraints and quality of the manufacturing files will be a big focus on the project . The project will be in 4 phases : 1- Existing schematic will be provided and will need to be clean/rework according to specification and new BOM. 2-Preplacement will be proposed by the rooter and review and corrections will be provided by the client. 3- final placement will be provided by the rooter. 4- Rooting proposition for each section will be provided section by section and reviewed by the client for correction till all sections are covered . Full project is on Altium designer. Project is in short deadlines (1...

I'm seeking a seasoned PCB designer to assist in creating a custom, compact PCB for an IoT project focused on sensor integration. The PCB will need to accommodate several components, including an ESP32-WROOM-32 microcontroller, SIM card module, SD card module, and RS485 transceiver. Key Requirements: - Expertise in PCB design, specifically for IoT applications. - Experience integrating multiple components onto a single PCB. - Ability to design a compact-sized PCB without compromising functionality. - Familiarity with the ESP32-WROOM-32 microcontroller and other specified modules. Ideal Skills: - Proficiency in PCB design software. - Strong understanding of sensor integration and IoT systems. - Excellent problem-solving skills to overcome design challenges. - Attention ...