Eagle pcb vievtrabajos
I am in need of an experienced freelance electronics designer who can assist us with design of a basic daughter board PCB for USB3 and Ethernet. Key Requirements: - Experience designing USB3 circuits - Available immediately The level of complexity for this project involves working on a multi-layered PCB. Importantly, please note the schematic already fully exists. The ideal freelancer should demonstrate previous experience in working with multi-layer PCB projects, and should be familiar with relevant tools and software. Kindly include previous PCB layout projects in your bids. By accurately interpreting my existing schematic, your role will be to check the design and feedback recommendations of suggests on function. Thank you in advance eager to start col...
I need a professional embedded system developer who is well-versed in C++ and Python languages ,circuit designing ,pcb designing, to join my project urgently. - Embedded system design with pcb design - HMI WITH TOUCH SCREEN AND WI-FI,MCU WITH 16 I/O, SENSORS,STEPPER MOTOR CONTROL,ACTUATOR AND BATTERY BACKUP. ETC.. - Proficiency in C++ and Python - Experience in designing and implementing embedded system code - Ability to work under tight schedules and deliver high-quality work While the specific details of my project have to be undisclosed for now, an understanding and experience across different domains of embedded systems, namely IoT, Robotics, and Automotive could be advantageous. The successful candidate should be able to deliver the project ASAP. Strong skills in p...
We're searching for a knowledgeable Embedded Systems engineer with an in-depth understanding of STM32 microcontrollers. Our project involves designing and implementing firmware for a new PCB. Key responsibilities: - Creating firmware to acquire readings from a temperature sensor and an oxygen sensor. - Converting the hexadecimal sensor readings into decimal for display purposes. - Enabling real-time data transmission of sensor readings. We need a expert who is proficient in STM32 microcontrollers and has a background in handling sensor data in real-time. You should have excellent skills in C/C++, as well as experience in coding for resource-limited platforms. Any previous experience with temperature and oxygen sensors would be a distinct advantage. Your challenge is to creat...
...148MHz to 150MHz (10 channels from 148.1MHz to 149.9Mhz with 200kz between channels, LoRa bandwidth 125KHz) RX downlink frequency will be from 137MHz to 138 Mhz ( total 3 channels, RX1 137.1MHz, RX2 137.3 MHz, beacon 137.1 MHz). LoRaWAN Protocol version will be 1.0.3. Sensor should support Clas A/B/C operations. Jobs that will be done: 1) Hardware Design of a LoRaWAN IoT sensor ( Schematic, Layout, PCB) for the given frequencies usin SX1276 chip 2) Custimization of LoRaWAN protocol for the given frequencies (LoRaWAN software cıustimization) 3) For software development STM32CubeIde will be used. 4) Mechanical design (enclosure) with IP67 and operating temperature from -20 to 50 Centigrade degree. Not: A detailed requirement document will be provided to the one that project will b...
...engineer to design a Double-layer PCB for signal processing operations. This board should be specifically designed using Altium Designer software. The design includes reverse engineering two components which are pre made and need to be implemented into the design. The design includes an Emg sensor, Emg data module, esp32 wroom 32, lipo battery and lipo battery charging module. Key project specifications include: - Design of a functional double-layer PCB - Focus on signal processing functions - Utilization of Altium Designer software Ideal candidates will have: - Extensive experience in PCB design - Specific knowledge and experience in double-layer PCBs - Proficiency in Altium Designer software - An understanding of signal processing applications in PCB...
ASIC Bitcoin Miner PCB Board Electronics Design 1- component sourcing & block diagram 2- schematic design 3- PCB layout design and component placement 4- Routing and Design Verification 5- Documentation to use the board and Production data ( Gerber, NC drill, Pick and place and Bill of Material etc.)
I am looking for an experienced graphic artist to create a realistic design for the rear of a medium-sized truck. The primary focus of the design should be on promoting and enhancing my company's branding a...and a realistic person in amonst the containers looking out the back. The graphic must be high resolution and sized to fill the area 2400mm x 1200mm as shown in the attached image. The image can also incorporate the 2400mm x 300mm area above the main area and or the 2400mm x 180mm area below. A sign will say "We will swap your empty bottles and cans for money at: 33 Belar Street, Yamanto or 140 Eagle Street, Redbank Plains The sign must be readable by people in vehicles following the truck. The graphic can be a high resolution bitmap image however scalable vector i...
Por favor, regístrate o inicia sesión para ver los detalles.
PCB Layout and Schematics delivery. PCB Gerber BOM Altium Schematics Altium Project files
Por favor, regístrate o inicia sesión para ver los detalles.
We need a BACnet/IP interface for connecting my ESP32 device to a BACnet network The project consists of one interface (ESP32) which communicates with 20 other ESP32 boards (automatic doors) by CAN...network The project consists of one interface (ESP32) which communicates with 20 other ESP32 boards (automatic doors) by CAN bus protocol. The interface is already able to manage the 20 Doors (I wrote the code) by reading and writing information or open/close commands by CAN bus. Our customer wants to control all 20 automatic doors by BACnet? So I would like to use my interface ESP32 (customised PCB developed by us) connected to a BACnet/IP system? If someone has experience or is attracted to this challenge, please let me know. For it’s not a free job. We agree to pay an acc...
We will give below inputs at the start of the project 1. "Handheld HMI" concept design is ready and ".stl" file designed using fusion360 software will be given 2. Internal engineering design/ fitment design having PCB dimensions, connectors & mounting details will be given Scope of work 1. Develop detailed engineering design - 2D and 3D CAD models of the concepts 2. Detailed engineering design to support the following - 2.1 shock test 2.2 drop test 2.3 IP67 ratings 3. Design should be production ready 4. Expected Product dimensions: 168 x 90 x 30mm 5. Provide support during the transition from design to production Deliverables 1. Editable ".stl" , ".step" files of the engineering design coverin...
...the turntable including the motor housing, bearing and have everything in place except for the motor as I am not sure which one to use. I need help with a motor that 'somehow' runs at 16RPM. Design in order of preference: 1. Designs that do not require any manufacturing and only needs to purchase readily available parts from the market. 2. Any other design that requires manufacturing like gears, PCB etc. If you're proposing a solution that requires manufacturing, then you should know how much it would cost to produce say 100 pieces of it. Some specifications and requirements: 1. The disk that this motor will be rotating is around 3KG and of 170mm diameter. 2. There is no weight kept on the motor's shaft as all the weight is offloaded onto a bearing that is...
I'm looking for a talented PCB designer who can help create a prototype for my project. This prototype will involve a variety of components, including active, passive, and digital. Key tasks include: - Designing the PCB layout - Incorporating all required components into the design - Ensuring the final design is square shaped Deliverables: 1. Schematic circuit diagram 2. BOM 3. Gerber 4. Design 5. 3D rendering The PCB should have the following capabilities: 1. Spin a DC motor 2. Connect 7" touchscreen 3. Dual SIM communication 4. GPS for tracking 5. Android OS for touchscreen UI Ideal candidates will have high attention to detail, excellent CAD skills, and proven experience in PCB design. Various versions may need to be designed and refined, so fle...
I need an experienced designer to work on my embedded system project. Your primary task is to create an IoT device integrated with sensor systems, using esp32 and LoRa RYLR498 modules. Key Responsibilities: - Designing a functioning PCB circuit - Creating an appropriate enclosure design - Implementing sensor integration into the IoT device Skills and Experiences: - Previous experience with embedded system design - Proficiency in working with esp32 - Familiarity with LoRa RYLR498 modules - Experience in IoT device development and sensor integration - Understanding of LoRa connectivity. Your extensive background in these areas will ensure a seamless development of the IoT device that meets our requirements.
...detection and prevention. Key Requirements: - Expertise in circuit design and hardware integration with an IoT focus. - Capabilities to implement features ensuring tamper detection and prevention as part of the BMS security. - An understanding of other added-value functionalities. HW integration - Raspberry Pi + CAN/Modbus/RS485/UART integration (from a commercial product) - Circuit design and PCB (for simulation) - Concept architecture design It is crucial that the freelancers on this project have a working understanding of Raspberry Pi GPU and pattern AI solution in data analysis. Familiarity with RC FCC V and SBS commands would also be a strong advantage. Required Changes: - Monitor any unauthorized changes in firmware - Customize command responses Ideal Skills...
...electronic engineer to design a programmable microcontroller-based PCB card. The card must serve the purpose of monitoring domestic power consumption, and so should include features to assist with this. Key Features: - The microcontroller must be programmable with tinyGo - Inclusion of GPRS for internet connectivity (only one provider available) - Incorporation of a single phase and tri-phase relay (50v - 400v) - 4inch max ePaper for screen display - Four functional buttons - Battery-operated - Hermetic Case design The desired size of the PCB card is small, between 2 and 5 square inches. All materials used should not exceed a total cost of $30. Ideal skills and experience: - Proficiency in electronic design, specifically with PCB - Familiarity with tinyGo progra...
I am seeking a skilled graphic designer to create a...seeking a skilled graphic designer to create a modern and minimalistic business logo for my company "SoarHigh Therapy". Below are some guidelines for the design: - Colors: Primarily yellow/gold and black, with a touch of green possibly incorporated. - Style: The design should be modern and minimalistic. - Elements: The logo should be a combination of text and image. I'd love for an image of an Eagle flying to be incorporated. Ideal candidates for this project would have experience creating modern, minimalistic logos and a strong understanding of color theory. Your portfolio should demonstrate your ability to integrate text and imagery seamlessly. Please provide samples of your work in your bid. Looking forward t...
I need an experienced PCB designer with proficiency in handling ESP32 modules to help design for a control system. This project entails the design and development of a custom ESP32 based PCB that's equipped with multiple input-output features, including analog inputs that ranges from 0 - 10vdc as well as analog outputs from 0 - 10dc. It also necessitates the integration of MODBUS, WIFI antenna extender connector, and battery backup components. Ideal Qualifications & Skills: - Robust knowledge of PCB design and layout - Experience with ESP32 modules - Proficiency in interfacing with analog inputs/outputs - Familiarity with MODBUS and WIFI antenna connector - Experience working with projects that require battery backup designs Environment: The end product ...
I am seeking a skilled graphic designer to create a...seeking a skilled graphic designer to create a modern and minimalistic business logo for my company "SoarHigh Therapy". Below are some guidelines for the design: - Colors: Primarily yellow/gold and black, with a touch of green possibly incorporated. - Style: The design should be modern and minimalistic. - Elements: The logo should be a combination of text and image. I'd love for an image of an Eagle flying to be incorporated. Ideal candidates for this project would have experience creating modern, minimalistic logos and a strong understanding of color theory. Your portfolio should demonstrate your ability to integrate text and imagery seamlessly. Please provide samples of your work in your bid. Looking forward t...
...of a sophisticated PCB for a cutting-edge Arduino and ESP32-based prototype. This project is focused on enabling seamless control and sensing operations, involving intricate tasks such as reading and writing to an SD card, WiFi communication, Serial communication to Arduino Mega, and efficient image capture and sharing capabilities over WiFi. Scope of Work: Milestone 1: Develop/Alter PCB for Induction Hotplate Control (Duration: 2 weeks) Design a PCB to regulate power supplied to the induction hotplate. Implement robust control mechanisms to ensure precise power adjustments. Conduct thorough testing and optimization for efficient performance. Milestone 2: PCB Development for Controlling and Measuring Electronic Components (Duration: 1 weeks) Design a com...
...of Tasks: Solution - Implement Data analysis - Observe Battery status, temp, charging current, current voltage, battery mode, relative state of charge, remaining/full charge capacity - Integrate Firmware changes in RC FCC V and SBS commands that aid in monitoring unauthorized changes HW integration - Raspberry Pi + CAN/Modbus/RS485/UART integration (from a commercial product) - Circuit design and PCB (for simulation) - Concept architecture design It is crucial that the freelancers on this project have a working understanding of Raspberry Pi GPU and pattern AI solution in data analysis. Familiarity with RC FCC V and SBS commands would also be a strong advantage. Required Changes: - Monitor any unauthorized changes in firmware - Customize command responses The method to monitor...
I'm looking for a skilled professional with profound expertise in circuit and PCB design, particularly for ESP32 based motor controllers. Key Requirements: - Deep understanding of 4-32V DC input - Proficiency in using RS485 as the communication interface - Capability to design a motor controller that can handle up to 30A of current - Current and Voltage measurement DC and AC This role requires a well-rounded understanding of motor controllers and experience working with ESP32 chips. Your design capabilities will significantly influence the success of this project.
Good evening I need a logo, the name is "TD" below "Management & consulting" I need a very minimalist but very professional logo. can try to add a animal professionnal a eagle or a wolf thx I need a very minimalist but very professional logo for a tax and consulting company. I D'ONT want to COPY and paste from PINTEREST or anything else, I want a unique logo !!!!!!! I want the logo to be unique and to have a thoughtful meaning. Dont copy even the reference is only inspirations !!! Thank you
Hey all I am just looking for a simple layout that will allow me to determine when both devices have been connected to the usb-c cable on both ends. It should just be a passthrough design that only monitors the CC lines for attach detection. I'm needing it to know if both ends are connected and not just 1 end of the cable. I have attached an image of my KiCad schematic of what I currently have using the INA219. However, it may be better to use a FUSB302/HUSB238 that's designed to monitor both CC pins so that it dont have to use 2 INA219's for each of my 6 usb-c input/output connectors. I plan on using a Arduino Pro Micro for the i2c communication to the FUSB302. I will be needing only 1 passthrough example that I can turn into the 6 input/outputs that I am needing. As alw...
...school logo inspired by an eagle. Key specifications for this project are: - Colors: The requisites colors to be incorporated within the logo design are blue, white, and gold. - Style: The desired style is modern. I value sleek, bold designs that capture the viewer's attention. For your application to be successful, please include: - Past work: Demonstrations of previously completed projects are a must, especially those intertwined with logo crafting. I'm particularly interested in past designs that embody a modern aesthetic, so as to ensure your design inclination aligns with my requirements. Fundamentally, I'm looking for someone who has a discernible eye for detail, and can deliver an up-to-date design incorporating the specified colors elegantly with an ...
I am seeking an experienced PCB designer for a prototyping project. It involves designing a board with components on one side and will have an intermediate level of complexity, having several components and connections. Ideal candidates should have: - Extensive experience in PCB design - A portfolio of intermediate level PCB designs - Knowledge on component placements and potential heating issues - Ability to deliver high-quality work for prototyping Those with demonstrable experience in prototype development will have a distinct advantage. Also, deadline adherence is critical for this project. Please include examples of your previous work in your bid. Looking forward to potentially working together.
Hello world-class designers, I'm looking for top-notch talent to help my organization refresh its current visual brand...representative one, primarily using a blue color scheme. Here’s what it's going to take: • Graphic Design Expertise: Extensive experience in handling corporate branding projects and a portfolio to prove it. Your knack for modern, on-point graphics will make the perfect solution for us. • Brilliant with Imagery: We'd love to incorporate imagery from our existing logos (electric power) - so have those eagle eyes ready! • Professional Taste: We’re all about professionalism. Our ultimate goal is to channel this through our new, sleek logo. Take this opportunity and make an imprint with your design acumen. Let’s ...
...be used for my specific applications. I need to use the electronic diagram of the Arduino Mega PCB board and implement the following changes: 1. Use an easy programming language, namely using the Arduino IDE to carry out this programming. In this way, use the Atmega2560 microcontroller. 2. The PCB must have between 10-12 24VDC digital inputs, 10-12 24VDC digital outputs, 3-4 analog inputs, 2 0-10V analog outputs, 1-2 4-20mA analog outputs. All with screw connectors (as in the image). 3. Interface for RS485 communication. 4. Interface for a touch screen display (where the RS485 communication data will be changed). This is all on the same PCB. In the end, I intend to have: - Electronic PCB design in DesignSpark file or compatible format; - GERBER files r...
...electronic circuit designer and PCB designer. The final project must include the design of a PCB with: 12 digital inputs; 4 analog inputs; 12 digital outputs; 4 analog outputs; 1 USB connection for programming; 4 connections for RS485; 1 interface for a touchscreen display. I will provide more details on certain specific components to be used on the PCB. Your understanding of these components and their proper implementation is crucial. Let's discuss further details regarding the PCB size, which is a detail I would like to finalize together, according to the prototype's requirements. Ideal candidates will have significant experience in PCB design, preferably using DesignSpark, and creating custom prototypes. Your experience and suggestions...
I am looking for a skilled freelancer who could convert .pcb files from Protell 99Se into 3D step models using Fusion 360 software. This project demands an attention to detail as it requires high-detailed models with textures. There are no specific requirements for the final format or compatibility needs, making this a perfect opportunity for a creative and meticulous Fusion 360 specialist. Ideal candidates will have experience on similar projects.
I'm seeking a professional to urgently design a Printed Circuit Board and Box for my project. Although I don't have a preferred software ideally it needs to be one that is widely used within the industry. Skills & Experience Required: - Proven experience in PCB design - Proven experience in Box design - Experienced in 3D design - Ability to work quickly and efficiently as the project is required ASAP I'm open to discussion about software used, as I skipped this question previously. The completion timeline for this project is very short, so the freelancer needs to be ready to begin immediately. Looking forward to your proposals!
I am seeking an experienced Electronics Engineer to develop a boost converter circuit capable of converting 48v DC 4.800w to 320v DC with a power of around 3500w. Key project requirements include: - Design a boost converter for increasing voltage output - Easy design PCB and schematic in KICAD - Use components that is easy to buy from Mouser our other company in EU - Use most SMD components Ideal skills and qualifications: - Proficiency in circuit design and simulation - Deep understanding of Boost converters - Experience with wide variety of components (Semiconductors, Passives & Integrated circuits) - Proven track record in delivering high power, high efficiency circuits. Your final deliverables will be a detailed schematic diagram, list of components with ordering detail...
3D design of a smart/wearable watch for children. Must be designed for 3D printing. The dimensions of the watch must be determined based on the dimensions of the PCB.
...of a professional to accurately convert my PCB circuit board layouts from PDF files into Gerber files. This task is crucial for the manufacturing process of my double-layer PCBs. An understanding of the technicalities involved in PCB manufacturing is vital. **Key Requirements:** - **Expertise in PCB Design**: Proficiency in reading and understanding circuit board layouts is a must. - **Conversion Skills**: Ability to convert complex PDF files into Gerber files without loss of detail. - **Knowledge in Double-layer PCBs**: Since my project involves double-layer PCBs, experience with these is necessary. - **Attention to Detail**: The conversion process must preserve all elements of the original design. - **Software Proficiency**: Familiarity with PCB design s...
Por favor, regístrate o inicia sesión para ver los detalles.
I'm seeking a talented graphic designer to create a captivating gold coin logo featuring an eagle emblem, incorporating a luxurious gold color scheme. This logo is envisioned to embody strength and prestige, suitable for my brand's high-quality standards. **Design Elements:** - **Color Scheme:** Primarily gold, open to designer suggestions for accent colors to enhance visual appeal. - **Imagery:** The central theme is an eagle. This should be stylized yet easily recognizable, symbolizing power and freedom. - **Font Style:** I haven’t decided on a specific font style, so I’m looking for recommendations. The text should complement the overall design and be legible at various sizes. **Ideal Skills and Experience:** - Proficiency in graphic design software...
In this project, I'm seeking a talented PCB designer who can assist me in creating a robust circuit design. Key Responsibilities: - Designing a circuit according to my requirements - Proposing suggestions to enhance the overall functionality - Familiar with SAM-M10Q-00B gps receiver IC - Familiar with ESP32-S3-WROOM-1-N16R8 esp32 integration For this project you will need expertise in creating a circuit that will function as a DAC that can oscillate both a 1575.42Mhz and 1227.6Mhz respectively. There needs to be multiple of these circuits, driven by the esp32, and the DAC circuit that you build will route to connection. Circuit design and PCB design is needed.
...grunge-style, black t-shirt design for me, featuring a distressed white US flag with a large, outlined eagle placed prominently on top. The design should also incorporate my attached logo, placed in an area that best complements the overall arrangement. Details: - Design style: Grunge - Design size: Large - Design components: Distressed US flag, Eagle outline, Attached logo Ideal Skills and Experience: - T-shirt design - Graphic design - Knowledge with creating a grunge effect - Placement of elements for visual balance Attached is my logo in white, an example of a white distressed US flag and the eagle that I would like to be outlined in white and then incorporated into the design. The eagle can be just the head or the entire body, whichever looks best....
I will update PCB with another ESP32 Enclosure will be updated according to pcb
Make a 2nd pcb on easy eda from schematic
Make another pcb in Easy eda from easy eda site
I need a small USB 2.0 device with stereo input and stereo output I'm looking for a professional who can create something similar to this (see link) but with one change: L/R line input L/R line output See pictures below So, mainly the professional has to modify a project create and provide me the schematic plus create the PCB and follow the first creation Further explanations by chat Budget 175 USD
I'm in need of a skilled PCB designer to create a sensor focused on detecting structural sound, primarily for industrial machinery monitoring. This project does not require integration with any existing systems, thus the sensor should be capable of operating completely independently. Main Project goal. Design of a single PCB which can be glued on a surface, 24VDC supply, 1 output to connect to PLC(short circuit proof), some LED's for status, RS485 connection for configuration/monitoring. use of STM32L071 micro-controller, and other parts preferably from our stock list. Design shall be made in Ki-Cad. No programming required. We have allready selected a structural sound sensor. Key Requirements: - Design expertise: Proficiency in PCB layout, design, and te...
Por favor, regístrate o inicia sesión para ver los detalles.
I require an expert in PCB design, specifically for EV (Electric Vehicle) charging stations. Your task will be to create a design for a PCB that is compatible with both Type 1 and Type 2 charging connectors. The design must ensure a power output of 22 kW, a fairly high specification that will require in-depth knowledge and experience in the realm of high-power electronics. Moreover, the EV charger PCB must integrate crucial safety features including: - Overcurrent protection - Short-circuit protection - Overvoltage protection Ideal candidates will have a strong background in electronic engineering, particularly with a focus on high-power applications and charging systems. Any prior experience with similar projects, especially related to EV charging stations, wi...
I'm looking for skilled electrical engineers who can design a PCB for a 50kW EV charger. This charger should adhere to the CHAdeMO charging interface standard and include a Type 1 (J1772) connector. Ideal candidates need the following skills and experience: - Comprehensive understanding of CHAdeMO charging interface standard - Extensive experience with PCB design - A strong background in EV technologies, specifically those that relate to chargers - Familiarity with Type 1 (J1772) connectors Your task involves creating schematics, selecting suitable components, and producing all necessary documentation. Please ensure your portfolio demonstrates relevant projects.
Need a logo for a new brand called “Freedom Leads” I’d like the text to included with icon. The icon should represent “freedom” in some way. This logo is for a digital marketing company that generates inbound leads for real estate investors. Concepts that can go with icon: - real estate - house - hitting target - eagle - dove - location **Key Requirements:** - **Design Style:** Minimalist/Modern. The new logo should be sleek and straightforward, avoiding any unnecessary complexity. Its simplicity should be its strength, making it instantly recognizable. - **Color Scheme:** Primary Blue #4285F4 and Secondary red: #DB4437 - **File Delivery:** Capable of delivering the final design in multiple formats (e.g., AI, EPS, PNG) to ensure full usabilit...
