Esp32 i2s example jobs

setting up an mqtt connection between esp32 and raspberry pi

I'm looking for a skilled engineer with...skilled engineer with experience in PCB design and schematic development for an ECU application using the ESP32. Key Responsibilities: - Design a PCB and schematic for an engine control unit that interfaces with temperature sensors. - Implement support for CAN bus and SPI communication protocols. Ideal Skills and Experience: - Proficient in ESP32 programming and integration. - Extensive experience in PCB design and schematic development. - Previous work with engine control units (ECUs) is a plus. - Strong understanding of temperature sensor interfacing. - Knowledge of CAN bus and SPI protocols. - VCU Should Have 2 CAN Channels - VCU should have 14 Digital Low Side Output( Like ULN2003) Example Link

I'm seeking an experienced Arduino programmer with expertise in working with the ESP32 NodeMCU or any other embedded platform for a project involving various sensors and components. This is a multifaceted project encompassing different types of sensor-based applications. Key components of the project include: - Temperature and humidity sensors - Motion and proximity sensors - Gas and air quality sensors - LED and clock - RFID The ideal candidate will have comprehensive experience in: - Programming with Arduino - Working with the ESP32 NodeMCU/Nordic/PIC/STM - Integrating and programming with various sensors and components Your role will be to help me setup and program the ESP32 NodeMCU and Arduino for these different applications. Let's bring this project...

I'm seeking an experienced Arduino programmer with expertise in working with the ESP32 NodeMCU for a project involving various sensors and components. This is a multifaceted project encompassing different types of sensor-based applications. Key components of the project include: - Temperature and humidity sensors - Motion and proximity sensors - Gas and air quality sensors - LED and clock - RFID The ideal candidate will have comprehensive experience in: - Programming with Arduino - Working with the ESP32 NodeMCU - Integrating and programming with various sensors and components Your role will be to help me setup and program the ESP32 NodeMCU and Arduino for these different applications. Let's bring this project to life together! I am looking for a regualr...

I need a controller for a TiMotion TA36 series linear actuator, using an ESP32. The actuator's functionality will be basic extend/retract. Key Requirements: - The controller should only facilitate basic extend/retract functionality of the actuator. - The ESP32 should connect to the linear actuator via a wired connection. - There is no need for status feedback from the linear actuator, such as position feedback or error reporting. Ideal skills and experience for the job would include: - Proficiency with ESP32 programming - Experience with linear actuators, specifically TiMotion's TA36 series - Knowledge of wired communication systems.

Build me a business where people can choose and book an appointment with a doctor or a pet groomer or a spa massage we need the business to be able to make an account and the clients to book appointments. Business account by location Guest account by location 20 categories of business Apointment reminders through automated mail Live appointment accurate times depending on the physiology of the task exc :hair dressing 30min hair Diye 2 hours etc. Guest Application for bookings. Reviews Advertisement of business that want to advertise and show higher

I'm looking for an experienced PCB designer to create a custom PCB for an ESP32 microcontroller to control more than 5 LED strips. The purpose of this project is to manage lighting through these strips using the WLED software. Key Requirements: - PCB design to control multiple LED strips - ESP32 compatibility - WLED software integration Ideal Skills: - Proficiency in PCB design software - Experience with ESP32 microcontrollers - Knowledge of WLED software - Prior work with LED strip control Please provide examples of similar projects you've completed in your proposal.

✻ NO EXPERIENCE NECESSARY ✻ You do not need any experience, but you must be clever and eager to learn. ✻ WHY RECRUIT A 16-24 YEAR OLD? ✻ Young people tend to be both creative and eager to learn. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...then you might find this project enjoyable. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test. If you were to pass the test, then we would negotiate the terms, including the price I would pay you for this project.

I'm looking for a freelancer to create 2 Google Slides for a sales pitch presentation. The slides should be based on an example that I will provide. - Purpose: The slides are intended for a business presentation aimed at potential clients. - Deliverables: Only 2 slides based on the example. - Ideal Skills: Proficiency in Google Slides, understanding of sales presentation structure and design, attention to detail, ability to follow provided examples closely.

I'm working on a research project and need an Arduino gas sensor to detect Carbon dioxide, Carbon monoxide, and NOx. The sensor will need to have capabilities for data logging and real-time alerts. Okay so using the arduino nano ESP32, I want to connect up a MICS-6814 gas sensor and run some code in which it detects the level of CO2, CO and other pollutants and then light up, either a green, amber or red LED depending on the air quality, green being good, amber being okay and red being poor. I have wired this up as follows which to my understanding is correct (but perhaps not): can you modify the code to include where I've added the inputs. So, the +5v on the sensor is connected to the VBUS on the arduino as it is powered by USB, the NO2 is connected to A1 input, the NH3...

My Android app functions ...functions perfectly on devices like Samsung and OnePlus running Android version 13 or higher. However, it fails on Redmi and iQOO devices with the same Android version. The app is unable to fetch characteristic and service UUIDs from the ESP32 devices. Key Issues: - The app's Bluetooth connectivity is failing on these specific devices. - An error message is displayed on the screen when it attempts to fetch UUIDs: "UUID not found". I need a skilled Android developer with experience in debugging Bluetooth connectivity issues, particularly with fetching UUIDs from ESP32 devices. Your task will be to diagnose and resolve this issue so that the app works seamlessly across all devices. Please include in your bid examples of similar issue...

✻ NO EXPERIENCE NECESSARY ✻ You do not need any experience, but you must be clever and eager to learn. ✻ WHY RECRUIT A 16-24 YEAR OLD? ✻ Young people tend to be both creative and eager to learn. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...then you might find this project enjoyable. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test. If you pass the test, then we will negotiate the terms, including the price I will pay you for this project.

I am looking for a developer to assist with: 1. 2x way secureoffline data communication between ESP32 Micro-Controller and PythonJavaScriptC servers. Using X509 certificates. 2. OTA firmware upgrade using self-signed certificate. X.509 certificate, AES256 is used for encryption algorithm, while the HmacSHA256 for hashing algorithm. Key requirements: - Good understanding of ESP32 MCU, Python, and JavaScript - Good understanding of data encryption, decryption and hashing techniques, particularly using AES256 & HmacSHA256 - Good understanding ESP32 OTA firmware upgrade

✻ NO EXPERIENCE NECESSARY ✻ You do not need any experience, but you must be clever and eager to learn. ✻ WHY RECRUIT A 16-24 YEAR OLD? ✻ Young people tend to be creative and eager to learn. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...then you might find this project enjoyable. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test. If you pass the test, then we will negotiate the terms, including the price I will pay you for this project.

I have a custom board with ESP32-S3 and a TFT display 240(RGB)x320 SPI 4-wire (ST7789V) with capacitive touch controller GT911 I2C. To create the UIs in Square Line Studio, I need a custom template and am looking for an expert who can create the template in Square Line Studio for ESP-IDF. The freelancer should have a good knowledge of SquareLineStudio.

I need an expert in embedded systems and payment integrations for a project involving ESP32 products. The project entails creating a UPI payment interface for these devices. The interface should support: - Peer-to-peer transactions - Merchant payments - Bill payments The interface must seamlessly integrate with popular platforms, specifically: - Google Pay - PhonePe - Paytm The communication protocol for this project will solely be Wi-Fi. Ideal candidates for this project would have a solid background in working with ESP32 devices, developing UPI interfaces, and understanding of the mentioned payment platforms. If you have previous experience with similar projects, I would love to see your portfolio.

I'm seeking an experienced engineer to design a schematic and identify parts for an IoT device utilizing an ESP32. This device should function as a three-way switch integrated with a solid-state relay. Key Components: - ESP32: Central microcontroller for this IoT device. - Solid-State Relay: Preferred relay type for its durability and efficiency. - Three-way Switch: Essential for the switch functionality of the device. Ideal Skills: - Expertise in IoT device design and schematic creation. - Proficiency with ESP32 microcontroller. - Solid understanding of solid-state relay function and integration. - Experience with three-way switch circuitry. Your bid should reflect your understanding of these requirements and your relevant experience.

✻ NO EXPERIENCE NECESSARY ✻ You do not need any experience, but you must be clever and eager to learn. ✻ WHY RECRUIT 16-24 YEAR OLDS? ✻ Younger folks often bring fresh perspectives, creativity, and a willingness to learn. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test. If you pass the test, then we will negotiate the terms, including the price I will pay you for this project.

Assalam o alaikum, its Muhammad Javed here an electrical & electronics engineer. I am looking for electrical engineers to be a part of my team. I have regular flow of work and already I have a team of professionals and now I am f...finding more professionals to provide me their services in the field of electrical engineers. I need freelancers having firm command over following domains Electric Circuit Design Control System Design Power System Design Image Processing Adaptive Systems Embedded Systems We mostly deal with following software's/hardware's MATLAB/SIMULINK Proteus Multisim PIC Microcontroller Arduino / ESP32 FPGA/VHDL Applicant should be proficient in writing technical FYP reports. Feel free to place your bid if you have expertise in any of ...

I'm looking for an experienced PCB designer to help design a double-sided PCB for a WiFi switch using an ESP32 and relays. This will also require integration of a voltage regulator. Key Requirements: - Proficiency in PCB design with a focus on double-sided layouts. - Hands-on experience with components such as the ESP32 module, relays, and voltage regulators. - Capability to design for power management, signal processing, and data communication. Ideal candidates should have a robust portfolio of similar projects.

I'm looking for a logo similar to the attached, but not too similar that it looks like a copy. The ideal colors are attached. Feel free to add an additional blue or green if necessary. Key Aspects: - Design Style: The logo should be simple and refined. - Elements: The logo should consist of both text and an icon of a house. The text should be "HECM" - Color Scheme: The logo will primarily use two colors: a specific shade of blue (#23649e) and a particular shade of green (#55bc04). These colors should be used in a way that maintains the minimalistic aesthetic. The ideal candidate for this project should have: - Strong graphic design skills, with a portfolio showcasing minimalistic designs. - Experience in logo design, particularly in creating logos that combine text and i...

✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ WHY RECRUIT 16-24 YEAR OLDS? ✻ Younger folks often bring fresh perspectives, creativity, and a willingness to learn. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test. If you pass the test, then we will negotiate the terms, including the price I will pay you for this project.

I'm seeking an expert to develop a touch-screen control pendant for my CNC machine, specifically the implementation of the coding required to interface a NEXTION HMI display to FluidNC; (An ESP32 based CNC control firmware) The Nextion HMI touch screen would speak to the ESP32 via a predefined UART, which is available in the FluidNC firmware/config. We would require control functions such as jogging on X, Y and Z, start, stop, pause, incremental/absolute coordinate switching, homing, reset etc. We would design the initial images and pages for the Nextion display using our own company branding/logos/keys. The appointed freelancer would then be required to integrate the codes required for the above functions and assign them to keys in the Nextion design software, ensuri...

Development of an IMU based searchlight work title (FF2) Hardware: Suggested ESP32 with IMU and BT. The awarded supplier will design schematic produce pcb needed and implement the function described aswell as implement the App there are available stp files pdf and dxf the boads neending to made is a stack of 4 pcbs. Input 2,5-5 volt no recharging, source Li ion 21700 and 18650 Reverse polarity protection and inrush protection. 3x highpower LED drivers 2,5 Amp 6-9volt 2x Low power 20-40 mA led driver 2x 4LEDs in series then in parallel or if possible all in series for showing searchlight is in standby, 1x4 in series for battery status this output must be able to permanent be on or be blinking depending on voltage over cell status. IMU must be able to be setup to do...

We are creating a pcb for control motor and led in theatre stage. The hardware we think to use is the following: ESP32-S3 W5500 (spi3) TMC5160PRO (spi4) Hardware to be integrated with your experience: Eeprom for read/store data Pin Expander for read configuration from dip switch Features: Communication with all the interface (Ethernet, motor driver, eeprom/flash, expander) Read Input from expander during startup for hardware configuration Read/store data from eeprom/flash thru webserver for software configuration WebServer (ip configuration, switch button for change parameters, field to fill and data to read from code) ArtNet Read (artnet 4 compliant with artsync and artpool - Up to 7 universe (one universe for motor control (to put in array accessible from loop + 6 un...

✻ WHY SOMEONE 16-24 YEARS OLD? ✻ Younger folks often bring fresh perspectives, creativity, and a willingness to learn. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ UNPAID TEST ✻ You must pass a difficult unpaid strategic thinking test.

Using an esp32 you need to create a local server to store a lot of id card (i think 1000 card will be ok), so each card can be activate, inactivate, delete and store with name and apparment number. This esp32 can be accesed by wifi to upload and download the data to be manipulated to activate/delete/inactivate,add new card, and so on, i think using a CSV format or excel or any other way that you show me will be fine, the easy the best. In the part of the ESP8266 there is going to be attached an RFID reader, and a relay to activate a external button in each floor of a building, and the way to use is that: any user aproach it contacless key or rfid card to the reader, the esp8266 read that number and send it to the esp32, using RS485 it talks with the ESP32 and c...

I need a software engineer who can develop a piece of software for a custom ESP32-C3-Mini-1 board. This software should control the dimming of an LED array using both an onboard magnetic encoder and smart home capabilities. Key Requirements: - The software must allow dimming of the LED array through both a smart home systems and an onboard positional sensor using I2C - Integration with existing smart home systems is crucial. The software should be adaptable to various systems like Amazon Alexa, Google Home, and Apple HomeKit. - The dimming will be done through a specified PWM channel, no alterations to the PCB will be necessary. Ideal Skills: - Proficiency in software development for ESP32 boards. - Proficiency in either C or Python. - Knowledge and experience in smart hom...

Hola, necesito la programación de una pantalla "ESP32-S3 4.3inch Touch LCD Development Board Type B, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor" con las librerias LVGL para desarrollo de pantalla sinoptica para proyecto de electromovilidad.

✻ WHY SOMEONE 16-23 YEARS OLD? ✻ I am tired of working with older engineers who have developed bad habits and have trouble thinking creatively. ✻ UNPAID TEST ✻ You must pass a brief yet difficult unpaid strategic thinking test. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable.

Hi, we need help with wiring, simple programming of MCUs (ESP32 and STM32). connecting and testing of sensors, motors etc. Payment will go though here but you will work at our site at Binh Loi, Huyen Binh Chanh.

I'm looking for a professional to design a 3D printable cuff or bracer for housing an ESP32. This wearable tech housing is intended to accommodate an LCD display, hence the need for a display screen cutout. Key requirements: - The design should be practical for use as a wearable tech housing, not merely a fashion accessory or cosplay prop. - It must include a precise cutout for an LCD screen. Ideal skills and experience: - Proficiency in 3D design software, with a portfolio showcasing wearable tech designs. - Experience with designing tech housing with precise cutouts for screens. - Understanding of ESP32 specifications for designing a suitable cuff/bracer.

I'm seeking a hardware specialist to extract PUF (Physically Unclonable Function) values from the SRAM of a development board. You can use any board that you are comfortable with, whether it's the ESP32, Okdo E1, STM32 or others. The main task is to extract these PUF values to a file for further processing. Key Requirements: - Extract PUF values from SRAM to a txt or csv file - Provide full technical documentation of the extraction process Ideal Skills: - Expertise in hardware, particularly with development boards - Experience in extracting PUF values - Proficient in creating technical documentation

Project Title: Wireless Pressure Sensor Data Transmission System Project Overview This project aims to develop a robust and efficient system for collecting and transmitting pressure data from five analog pressure sensors connected to an ESP32 microcontroller board to mobile devices (Android and iOS). The system will involve software development for both the microcontroller and the mobile applications. Key Requirements Hardware: ESP32 microcontroller board Five analog pressure sensors Necessary peripherals (e.g., power supply, cables) Software: Microcontroller: Firmware to read pressure values from the sensors Communication protocol (e.g., Wi-Fi, Bluetooth) to transmit data to the mobile devices Data processing and filtering (if required) Mobile Application (Android and iOS...

I'm looking for an Arduino IDE developer who can help with an ESP32 CAM project. This project involves scanning a QR code with the ESP32 CAM and triggering a motor based on the scan results. Key Requirements: - The motor should only be triggered if the QR code matches a specific numeric pattern. - The motor should run for a predetermined duration once the pattern is matched. Ideal Skills: - Proficiency with Arduino IDE and ESP32 CAM development. - Experience with QR code scanning and motor control. - Ability to understand and implement pattern matching with QR codes. Please bid if you have the necessary skills and experience. Looking forward to your proposals.

I'm looking for a skilled programmer to update my existing ESP32 program with some new features. The key addition is the integration of a new sensor. The ESP32 is currently functional with an RS485 interface and has IoT capabilities. Ideal skills and experience for the job include: - Proficient in ESP32 programming - Experience with RS485 interface - Knowledge of IoT - Ability to integrate new sensors - Prior experience with ESP32 programming updates Please note that while I have skipped some questions, I am open to suggestions on enhancing data logging or integrating other types of sensors.

You must be a 16 to 23-year-old student who lives in Latin America or Eastern Europe. ✻ WHY A STUDENT? ✻ I am tired of working with older engineers who have developed bad habits and have trouble thinking creatively. ✻ UNPAID TEST ✻ You must pass a brief, unpaid strategic thinking test. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable.

Looking for a power system engineer that has a 3 phase inveter circuit or can build one for me really fast. System output must be 24V to 72V Must be SPWM Rating is 5kva It is a transformer base inverter Must use IR2110 driver IC Must provide simulation results Must provide PCB design with full bom to manufacture Must do this within 48hrs 3 phase signal can be from any module like ESP32 or any module. You are only going to be building everything after the signal generation There are multiple designs online for this generic system

...Seconds, Speed 2 Relay Switching ON at 0.8 seconds, Speed 3 Relay switching ON at 1.2 Seconds, Speed 4 Relay switching ON at 1.6 Seconds and Speed 5 Relay switching ON at 2 Seconds) Proposed Schematic (Can be changed) Transmitter: I2C I/O Expander ---> Microcontroller ---> LoRa/ RS485 Receiver: LoRa/ RS485 ---> Microcontroller ---> I2C I/O Expander The microcontroller can be anything, but Arduino/ ESP32 is preferable Ideal Skills: - Proficiency in Electronic Schematic - Experience with LoRa technology/ Equivalent tech which has more than 1km range - Skills in creating compact, user-friendly designs - Understanding of safety protocols for emergency stop features We are currently using F24-60 Remote Control of Telecrane. We are planning to make a remote control of ...

...lives in Latin America or Eastern Europe. ✻ WHY A STUDENT? ✻ I am tired of working with older engineers who have developed bad habits. ✻ LOGIC TESTS ✻ You must pass three challenging and unconventional logic tests. The first logic test is unpaid. But, if you pass the second test, I will pay you $25. Then, if you pass the third test, I will pay you $50. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ ADMITTING MISTAKES ✻ Please stand in front of a mirror and practice saying, "I was wrong." Please learn to say it with a smile. This is not a joke. I am being serious. It is important to me. In my experience, the best engineers readily admit their mistakes, which helps in problem-solving. Conversely, poor engineers often...

I'm looking for a skilled PCB designer who can create a KiCAD PCB design for a shield intended for an ESP32 Devkit v1. This shield will serve as a sensor interface, allowing connection to 5V ADC sensors via 3 Pin JST 2.54mm connectors. As I need to power the ESP32 via the VIN pin I need a 2 Pin JST 2.54mm connector to feed 5v to the ESP and to the sensor connectors. Key Requirements: - Design should accommodate 4 sensor connectors. Each 3 Pin JST 2.54mm connector should be mounted vertically in the middle between the two rows of the ESP32 pins. The ADC Pins to be attached to the connectors are: A14 (GPIO13), A15 (GPIO12), A16 (GPIO14) and A17 (GPIO27) - The shield and subsequently the ESP32 is powered by a horizontal (2 Pin) JST 2.54mm connector in the bot...

I'm looking for a skilled designer to create a versatile SVG logo in white, blue, and light blue. The logo should be adaptable for different backgrounds - specifically a white background and a dark blue one. It must also be suitable for embroidery, as it ...should be distinctive yet simple enough to be easily recognized. - The design style should be 'modern and sleek', aligning with contemporary design trends. - The logo should be visually appealing and maintain its integrity when scaled up or down. - Experience with creating logos for embroidery is a plus. Please write something in your proposal to prove you have look at the example attached screenshots. I have included an example logo for reference. It is crucial that the final design looks good on both a w...

I'm looking for an experienced Arduino or VSCode programmer to write a program for an ESP32 that controls digital LEDs on a staircase. The system will utilize two motion sensors and should enable me to edit various lighting effects. The boards mentioned at the bottom of the description should be supported but I am open to other similar ESP32 boards integrated with a touch display. It would be great if the graphical interface could be easily editable by me, for example, using LVGL. I have already created a working version on Raspberry Pi Pico in MicroPython. It works, but it’s not efficient or scalable enough. Hence, I decided to switch to ESP32. Brief description of the program functions: USER INTERFACE The controller should have two lighting mode...

I'm having trouble with my ESP32-S3. Specifically, the device is not being recognized during USB connection attempts. Ideal skills for the job include: - Deep understanding of ESP32-S3 and its USB interface - Experience with hardware troubleshooting - Proven track record in embedded systems - Familiarity with USB connection issues and their resolutions - Excellent problem-solving skills and attention to detail Given the nature of the issue, I would appreciate a freelancer who can quickly diagnose and resolve the problem. Please reach out if you have the relevant expertise.

I'm seeking a software engineer with expertise in ESP32 and IoT for an ambitious project. The primary goal is to develop esp32 software that will control industrial equipment via a smart app. Key Responsibilities: - Design and implement IoT device control software using ESP32. -Design a smart app to control - Ensure the software can manage automation and control of the industrial equipment. Ideal Skills and Experience: - Proven experience with ESP32 and IoT software development. - Strong background in industrial automation. - Excellent problem-solving skills and attention to detail. I'm looking for a professional who can deliver robust and efficient software to help streamline our industrial processes.

I've developed a TinyML model and I'm seeking a professional to evaluate its accuracy and power consumption using the MLPerf Tiny framework available on GitHub. Key tasks include: - Using the MLPerf Tiny framework to assess the model's accuracy and power consumption. - Accessing an online database I will provide to evaluate the test data for accuracy. - Utilizing the ESP32 hardware for power consumption evaluation. Ideal skills and experience: - Proficient in TinyML and MLPerf Tiny framework. - Experience with latency ,accuracy and power consumption evaluation. - Access to and familiarity with online databases for data evaluation.

...lives in Latin America or Eastern Europe. ✻ WHY A STUDENT? ✻ I am tired of working with older engineers who have developed bad habits. ✻ LOGIC TESTS ✻ You must pass three challenging and unconventional logic tests. The first logic test is unpaid. But, if you pass the second test, I will pay you $25. Then, if you pass the third test, I will pay you $50. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ ADMITTING MISTAKES ✻ Please stand in front of a mirror and practice saying, "I was wrong." Please learn to say it with a smile. This is not a joke. I am being serious. It is important to me. In my experience, the best engineers readily admit their mistakes, which helps in problem-solving. Conversely, poor engineers often...

I need a PCB header board with 5 components. The components will be solder pins and plugin screw terminals. The main purpose of the board is power distribution, with a maximum current rating of 1A. Ideal skills for this project include: - PCB...solder pins and plugin screw terminals. The main purpose of the board is power distribution, with a maximum current rating of 1A. Ideal skills for this project include: - PCB design - Schematic capture - Knowledge of power distribution systems Experience with designing simple, low-power PCB header boards would be particularly advantageous. Project is based around Kincony ESP32-S3 Core Board Header board is to into the same location the SIM Module fits & pickup extra GPIO pins as per drawing.

I'm seeking an experienced IoT Developer adept with ESP32 board and display. The project involves creating a device for industrial control with the capabilities of monitoring and displaying real-time sensor data. Key Responsibilities: - Design and develop an IoT device for industrial control. - Integrate and program a camera and display to the ESP32 board. - Ensure the device can display real-time sensor data accurately. Ideal Skills: - Proficiency in programming ESP32 and Display. - Experience with industrial IoT development. - Strong understanding of real-time data monitoring and display.

...lives in Latin America or Eastern Europe. ✻ WHY A STUDENT? ✻ I am tired of working with older engineers who have developed bad habits. ✻ LOGIC TESTS ✻ You must pass three challenging and unconventional logic tests. The first logic test is unpaid. But, if you pass the second test, I will pay you $25. Then, if you pass the third test, I will pay you $50. ✻ IF YOU ENJOY WORKING WITH ARDUINO AND ESP32... ✻ ...you might find this project enjoyable. ✻ ADMITTING MISTAKES ✻ Please stand in front of a mirror and practice saying, "I was wrong." Please learn to say it with a smile. This is not a joke. I am being serious. It is important. In my experience, the best engineers readily admit their mistakes, which helps in problem-solving. Conversely, poor engineers often refus...