Artikel sepeda motor bahasa inggris jobs
...precise and manufacturable using injection moulding. - Understanding the functions and requirements of worm gear sets in home appliances. - Delivery to be as Solidworks part files and assembly. Requirements include: - To fit inside 98mm diameter component with the output central to this. - With a minimum of 250:1 ratio but preferably higher. - To withstand a torque of 15Nm. - Be driven by a Nema 17 motor with 5mm shaft, that can be housed below the cylinder but within a concentric diameter of 120mm. The ideal freelancer for this project should have: - Extensive experience in SolidWorks and mechanical design. - A good understanding of worm gear sets and their application in home appliances. - Ability to deliver a design that is not only functional but also cost-effective for mas...
... SETUP SECTION: Step 1: Servo Motor 1 will rotate clockwise direction with 1 rotation / 3 sec speed at very low torque. Once the motor is stopped by mechanical force. The Position will be set as END + 15 Step. Once the position is recorded, the motor will rotate Anti-Clockwise direction with 1 rotation / 3 sec speed at very low torque. Once the motor is stopped by mechanical force. The Position will be set as START + 15 Step. The motor will then move to START POSITION. Step 2: Linear Driver will communicate with Linear Motor moving in backward direction with low Torque and when mechanically stopped will register the position as END POSITION + 15 step. Step 3: Servo Motor 1 will move to END POSITION. Step 4: Linear Driver will communic...
...educational experience for kids learning robotics. Key Responsibilities: - Customizing mBlock to integrate with the SP32-S3 - Implementing functionalities like sensor integration, data logging and Wi-Fi connectivity Robotic Features: The kit should be able to demonstrate: - Movement control - Obstacle avoidance - Light and sound interaction - Using components like a camera, infrared sensor and servo motor - Implementing line-following functionality using IR sensors to track lines on the ground. - Enabling voice command control using a microphone and speech recognition software. - Adding gesture recognition capabilities using the camera and machine learning algorithms. - Setting up Bluetooth communication to allow interaction with mobile devices or other robots. - Implementing f...
I will create a prototype of the gearbox and arm mechanism previously designed as a contest entry. -Everything will be 3D printed except for the shafts. -no electric motor or solenoid will be used. the input shaft will be turned manually, and the gear change actuated manually by pushing and pulling on the shaft which the solenoid will interface with. -Shipping of the prototype from Cape Town, South Africa to the client's location will be at the client's expense. -If there are any issues with the assembly or operation, the design will be modified accordingly.
I'm looking for a skilled AutoCAD professional to prepare the drawings for a motor control panel for our project. I will provide the preferred layout based on company standards. The attached load list and single line diagram outline our specific requirements. Key Requirements: - Understand and translate the provided load list and single line diagram into comprehensive motor control panel drawings. - Utilize the provided layout based on company standards for the design. - Use any version of AutoCAD to create the drawings as any version is acceptable. Ideal Skills: - Proficiency in AutoCAD with Electrical Engineering Background - Experience in designing motor control panel drawings - Ability to understand and interpret technical diagrams and load lists - Attentio...
I'm seeking an Arduino specialist to teach me coding at an intermediate level. My primary interests lie in sensor integration and servo/motor control, with a focus on robotics projects during our lessons. Skills & Experience: - Proficient in Arduino coding - Prior experience in teaching Arduino - Knowledgeable in sensor integration and motor control - Background in robotics - Excellent communication skills The budget for this project is $13 per hour. Please apply if you meet the qualifications and can deliver engaging, informative lessons. Lessons will be conducted online.
...This freelance role offers flexible scheduling. Ideal candidates should have strong experience in troubleshooting and installing industrial electrical systems, particularly in motor and instrumentation support. Key Responsibilities: -Troubleshoot and repair 3-phase motors and associated systems -Diagnose and resolve issues with 4-20 mA instrumentation signals -Install and maintain control panels across various industrial sites -Safely work with high-voltage (480V) equipment, including contactors and relays Requirements: -Experience: Minimum of 1 year in industrial electrician roles -Skills: Expertise in 3-phase motor troubleshooting, 4-20 mA instrumentation, and control panel installations -Knowledge: Familiarity with high-voltage (480V) systems, contactors, and relays -...
Please read the f...concise but efficient. Recommend a textbook with 1 or 2 chapters discussing those lab topics. Lab 1 Exploration of system identification and parameter estimation. Analyze static, frequency response, and transient tests of a DC motor and determine its relevant parameters, namely its time constant ? and steady-state gain ?. Several calculations of these parameters using the different experiments and compare the results. Lab 2 Control of the angular position of a load shaft connected to a DC motor. It will analyze data from PV and PIV control systems for the DC motor. As applied for step and ramp responses, determine the control law performance metrics such as steady-state error, peak time, and peak overshoot. Explore these ideas with both a simula...
I need an expert to amend my DWG format wiring diagram. The modifications should include the addition of a motor, two Schneider Electric contactors, and overload protection, coupled with a small amount of control wiring. Key Tasks: - Adding a new motor to the diagram - Incorporating 2 Schneider Electric contactors - Including overload protection - Modifying a small portion of control wiring You will be required to follow the existing labeling and annotation style of the diagram. I do not have specific requirements for labeling the new components, but it is crucial that you maintain the consistency with the existing style. Ideal Skills and Experience: - Proficient in CAD software, particularly in DWG format - Experienced in modifying wiring diagrams - Familiar with Schnei...
...Structure: 2 independent towers with a movable base. Horizontal Cutting Area (X): 2000 mm. Vertical Cutting Area (Y): 1200 mm. Adjustable Width: Up to 4000 mm. Cutting Wires: Supports up to 4 at 8 simultaneous wires without excessive heat dissipation. Components and Controllers: Motors: kgf motors for precise movement. Controller: Use of Mach3 CNC controller. Drivers: Independent drivers for each motor for optimized control. Support Table: A robust support table for foam blocks during cutting. Project Requirements: Detailed CAD Drawings: Including all dimensions and components. Bill of Materials (BOM): Listing materials and recommended suppliers. CNC Files: Provision files for manufacturing. Manufacturing Suggestions: Cost-effective material and process recommendations, usin...
I'm in need of a proficient engineer with a robust background in robotics, specifically for industrial use. The project involves creating an electronic control system for an industrial robot. This control system should be able to manage: - Electronic Systems: Design and implement the electronic systems that will control the robot. - Motor Control: Develop a reliable motor control system to operate BLDC and Stepper motors. - Sensor Measurement: Incorporate a sophisticated sensor measurement system for quality inspection and ensuring the robot operates within its designated parameters. - User Interface: Create an intuitive user interface for monitoring and controlling the robot. - Testing: Carry out rigorous testing to ensure the control system operates seamlessly. -...
...health and mental well-being 2. Boost Brain power: Learn how movement stimulates cognitive development essential motor skills: equip your child with the building blocks for lifelong success 4. Learn to incorporated movement into your daily routine Enroll now to give your child the best start and master the building blocks of movement The above is the premise of my webinar I need the landing page by the 29-30th of October For an idea of my branding colors please view I was thinking of adding an about me section below the fold line About me: Dr. Tara is a board certified pediatric physical therapist with over 30 years of experience. Tara authored “Why Motor Skills Matter: Improve your child’s physical development to enhance learning and self esteem.&rdq...
I'm in need of a skilled CAD designer to assist with the design of a vacuum cleaner. The focus will be on creating detailed and precise CAD models for various components of the vacuum cleaner. Key areas of focus include: - Outer casing: Designing a robust, lightweight and durable outer casing. - Motor assembly: Creating an efficient design for the motor assembly, considering factors such as weight distribution and ease of assembly. - Dust collection system: Designing an effective and user-friendly dust collection system. Ideally, you should have: - Strong experience in industrial CAD design, particularly for consumer electronics. - A keen understanding of the requirements for vacuum cleaner design. - Exceptional attention to detail and a commitment to delivering high-...
...Textbox, which will instantly update the list of Equipment to the right, to only show Equipment that contains the string in any field. When the user selects a listed Equipment, the Components which are part of that machine will be displayed separately on the same window. If the initial design and development is acceptable, future development will be as follows: When a component object (such as Motor #1, Compressor #3) is selected, the user will be able to select one of the following: Ultrasonic, Thermographic, Phase Sequence, Waveform, or Current Balance. Doing so will populate a textbox for notes, as well as a list of files which have been added. I will need to have a lot of control on how a file is opened. For example, I don't want the application to try to download a fi...
I'm seeking an experienced electronics engineer to create a pinout design for a robot controlled by an NVIDIA Jetson Orin Nano. This will involve: - Designing pinout connections for power supply, data transmission, and control for a range of devices including a LIDAR, two cameras, a GPS sensor, encoder wheels, and motor control boards. - Ensuring every listed board and device receives power and can be controlled by the Nano compute module. - Creating a schematic diagram to illustrate the pinout connections. The schematic should be a clear, printable (PDF) format. While you can utilize any tools for the pinout design, the schematic needs to be on a blank paper with clear markings of the pin numbers. You must also identify if additional extension boards are necessary, demonstrat...
I'm in need of a professional translator who can proficiently translate academic papers from English into Bahasa Indonesia. The translation is intended for publication, so it's crucial that the translated text matches the quality and accuracy of the original paper. Key Requirements: - Expertise in translating Social Sciences academic papers. - Deep understanding of both English and Bahasa Indonesia, with ability to capture cultural nuances. - Experience in translation for publication. - Exceptional attention to detail and ability to meet tight deadlines. Ideal candidates should have a background in the Social Sciences and a proven track record of translation work in the field.
I am seeking an experienced MATLAB Simulink engineer to set up a simulation for a Fuzzy Logic Controller (FLC) based Direct Torque Control (DTC) of an Induction Motor. Key Requirements: - Extensive experience with MATLAB Simulink, specifically with the SimPowerSystems toolbox. - Proven track record of setting up complex simulation setups. - Familiarity with Induction Motor models and their parameters. The main focus of the project will be to create a simulation setup in SimPowerSystems for the induction motor. It is crucial that you have a deep understanding of the parameters and behavior of induction motors in a simulated environment. Please note that the project does not currently require the inclusion of a power electronics converter or sensors and measurement bl...
...STM32 Nucleo board. The toothbrush features an OLED display (128x64) and several tactile buttons to enhance user interaction. Upon powering on, the OLED should display a 2-minute timer that remains active, even when the user toggles between speed modes. Control buttons include a power switch to turn the toothbrush on and off, a motor control switch, a speed mode switch (to toggle between three speed settings: Low, Medium, High), and a motor rotation button that reverses motor direction when pressed. Optional development includes an OLED menu interface, allowing intuitive speed adjustments alongside the 2-minute timer display. Firmware should be written in C/C++ for STM32 microcontrollers, requiring skills in PWM for speed control and GPIO for button input handling, ...
Must live in Arizona for this project: and I need you to travel to me to fix this issue. I need a TB6600 stepper motor driver wired into a 30w Raycus fiber laser. The purpose is to control a rotary chuck using laser software. Ideal Skills Include: - Expertise in electronics and specifically laser machinery - Experience with stepper motor driver integration - Familiarity with TB6600 driver - Competence in working with Raycus fiber lasers - Knowledge in software for laser control Please feel free to reach out if you require any further details.
Saya sedang mencari desainer yang ahli untuk membuat rangkaian mingguan postingan gaya carousel untuk media sosial saya. Posting tersebut, yang terdiri dari 3-5 gambar, akan berfokus pada mempro...untuk membuat rangkaian mingguan postingan gaya carousel untuk media sosial saya. Posting tersebut, yang terdiri dari 3-5 gambar, akan berfokus pada mempromosikan layanan kami ke industri F&B dan pelanggan potensial lainnya yang membutuhkan pengiriman kristal es. Tanggung Jawab Utama: * Memodifikasi template yang disediakan untuk membuat 5 postingan per minggu. * Mengubah gambar dan detail dalam Bahasa Indonesia. Kandidat Ideal: * Mahir dalam konsep pemasaran media sosial. * Dapat bekerja dengan template yang disediakan. * Lancar berbahasa Indonesia. * Pengalaman bekerja dengan k...
...smooth operations. -Reporting: Provide regular updates on project milestones, challenges, and achievements to company leadership. Preferred Qualifications: -Proven experience in launching products, ideally in the F&B industry. -Strong understanding of the Indonesian food market, including supply chain and regulatory processes. -Excellent communication and negotiation skills in both English and Bahasa Indonesia. -Experience with health and fitness products is a plus. -Ability to work independently, manage projects from start to finish, and handle multiple tasks. -Willingness to travel within Indonesia to visit suppliers, factories, and potential business partners. Additional Info: Since this is a new business venture, the role will begin as a freelance position with flexibl...
Must live in Arizona for this project: and I need you to travel to me to fix this issue. I need a TB6600 stepper motor driver wired into a 30w Raycus fiber laser. The purpose is to control a rotary chuck using laser software. Ideal Skills Include: - Expertise in electronics and specifically laser machinery - Experience with stepper motor driver integration - Familiarity with TB6600 driver - Competence in working with Raycus fiber lasers - Knowledge in software for laser control Please feel free to reach out if you require any further details.
I'm looking for someone with deep knowledge in control systems, specifically for a DC motor. The main focus of this project will be on stability analysis using the Routh criterion, Ziegler and Nichols methods, and Root Locus System. The work will primarily involve theoretical calculations. Ideal skills and experience for the job: - Proficient understanding of control systems - Experience with DC motors - Knowledge of Routh criterion - Familiarity with Ziegler and Nichols methods - Understanding of Root Locus System
...public, so the language should be simple yet engaging. The articles should cover general information about eBikes, including but not limited to: - The benefits of using eBikes - The latest trends and models - Maintenance and care tips Keyword topics- all articles 600 to 800 words kids ebike mid drive ebike ebike classes ebike insurance foldable ebike ebike rack dirt ebike electric ebike dual motor ebike full suspension ebike Each article must contain 3 references from authoritative links that rank on Google. While links can be shared between articles, the same 3 links shouldn't be used over and over, select a variety of references. No sales pitches, nothing is for sale. Keep the article educational and informational without using any personal language. Please ensure ...
I'm looking for a skilled programmer who can write code for an Arduino board to control multiple brushed DC motors for an upcoming trade show. Key Requirements: - The motors should all run at the same speed. motors are connected by a wire harness to the main power source which is 24 volt DC - Speed control is imperative, as the motors n...should all run at the same speed. motors are connected by a wire harness to the main power source which is 24 volt DC - Speed control is imperative, as the motors need to be adjusted according to a preset sequence. want motors to turn on for a predetermined time, stop for 25 minutes, start again for a few seconds. Ideal Skills: - Proficiency in Arduino programming. - Prior experience with DC motor control. - Ability to create a sequence for...
I followed a step by step tutorial on building an automatic Hallowen candy dispenser and used the code provided. The tutorial is here schematics are attached and the code is here After assembling it I can't get it to work. I think the issue maybe ...ic-candy-dispenser/blob/master/halloween_candy2.ino. After assembling it I can't get it to work. I think the issue maybe with the IR sensor but I am not sure how to troubleshoot or correct the problem (if that is even the problem). Wiring the switch was not clear but I tried wiring it both NO and NC. When I do hit the button when it is NC 2 green lights on the IR sensor turn on but the stepper motor will not turn.
I need experienced programmer for my dual axis solar tracker. The goal of this project is to maximize solar energy capture using a sophisticated setup. Key Components: Esp32s3 LCD 5 inch 1024x600 dev board - Rotary encoders rs485 - 1 VFD RS485 - Two motors - Two contactors - Wind direction, speed / rs485 solar algorithm - Latitude and Longitude input Motor Control: - The motors in this tracker are controlled using Rs485 VFD. Ideal Skills: - Proficient in Arduino esp32s3 programming - Knowledge of controlling motors using Rs485 VFD - Familiarity with using rotary encoders and VFDs - Understanding of solar algorithms I am looking for a freelancer who can deliver efficient and effective code to optimize the performance of this solar tracker.
I'm seeking a professional with expertise in MATLAB Simulink to develop a Fuzzy Logic Controller (FLC) based Direct Torque Control (DTC) model for an induction motor. The primary goal of this project is to minimize torque ripple. Key requirements for the project include: - Designing a Simulink model that incorporates a Graphical User Interface (GUI) and supports Real-time simulation. - Adhering to IEEE standards throughout the design process. Ideal candidates for this project should have: - Extensive experience with MATLAB Simulink and control systems. - A strong understanding of induction motors and torque control. - Familiarity with IEEE standards. - Ability to create intuitive and functional GUIs in Simulink.
...development of nine interactive child games, each designed to be engaging and fun, with varying levels of difficulty. The games will encourage problem-solving, attention, memory, and coordination, making them both entertaining and beneficial for children. The games are structured across five difficulty levels, with each level designed to gradually challenge and enhance a child’s cognitive and motor skills. We are looking for a developer to bring these games to life through immersive VR experiences, ensuring that each task is both engaging and intuitive for young players. Sample Game Overview: One of the key games involves identifying and interacting with numbers in a dynamic environment. Numbers from 1 to 9 appear randomly in the virtual world, and the child must perform ...
I'm looking for an expert to enhance my inverter EGS002 module with adjustable overload protection and short circuit protection features. Key Requirements: - Implement both adjustable overload protection and short circuit protection - Short circuit protection should be triggered by current exceeding a set limit Ideal Skills: - Experience in working with inverter EGS002 modules - Knowledge in motor control applications - Proficient in designing overload and short circuit protection systems.
I need a unique PCB designed based on the STM32F1. This PCB is inten...components. Key Requirements: - The PCB must be designed for industrial automation applications, so durability and reliability are crucial. - It should incorporate motor control capabilities, so experience with designing PCBs for controlling motors is a plus. - The integration of sensors is also required. Knowledge of selecting and implementing appropriate sensors for industrial use is preferred. Ideal Skills and Experience: - Proficiency in PCB design software. - Extensive experience with STM32 microcontrollers, particularly the STM32F1 series. - Prior experience in designing PCBs for industrial applications. - Knowledge in motor control and sensor integration. - Excellent problem-solving skills and att...
I'm in need of a small n20 motor for a decorative movable object. Requirements: - RPM: 50 to 60 - Diameter: 10 mm - Length: 50 mm - Type: N20 - Motion: Rotational - Environment: Indoor Ideal skill set includes: - Experience in sourcing small motors - Expertise in robotics or decorative object design - Familiarity with motor specifications and requirements
...meal allowance) - Location: MITEC, Kuala Lumpur Key Responsibilities: - Translate inquiries from Bahasa Malaysia to English - Greet and welcome visitors to the booth - Provide customer service and explain booth information - Assist in processing collected information - Help organize exhibition booth materials Ideal Candidate: - A current student or graduate with a higher diploma or above, preferably in Electrical Engineering - A local Malaysian with strong English skills - Excellent interpersonal and communication skills - Positive, optimistic, and proactive personality - Engineering background preferred, specifically in Electrical Engineering Skills and Experience: - Translation skills (Bahasa Malaysia to English) - Customer service experience - Engineering knowledge (...
I'm seeking an experienced professional to design a High Voltage Motor Control Center (MCC) panel using EPLAN. The drawings must comply with NEMA standards and incorporate the following components: - Circuit Breakers - Motor Starters - Control Relays Ideal candidates for this project should have demonstrable experience in MCC panel design, thorough understanding of NEMA standards, and proficient use of EPLAN software.
...for Electric Scooter Design (SolidWorks)** **Job Description:** We are looking for a freelancer to create a 3D CAD model using SolidWorks for an electric scooter production based on a provided reference design image. The design needs to be customized and optimized for the integration of an electric motor. The model should focus on ensuring proper fit for the motor and the overall structure. **Deliverables:** - 3D CAD model in SolidWorks format - Integration of mounting points for the electric motor - Optimization of the body and chassis design - Required file formats (STL, STEP, etc.) **Requirements:** - Expertise in SolidWorks 3D modeling - Familiarity with electric vehicle design (especially scooters) - Knowledge of mechanical and electrical component integrati...
...for Electric Scooter Design (SolidWorks)** **Job Description:** We are looking for a freelancer to create a 3D CAD model using SolidWorks for an electric scooter production based on a provided reference design image. The design needs to be customized and optimized for the integration of an electric motor. The model should focus on ensuring proper fit for the motor and the overall structure. **Deliverables:** - 3D CAD model in SolidWorks format - Integration of mounting points for the electric motor - Optimization of the body and chassis design - Required file formats (STL, STEP, etc.) **Requirements:** - Expertise in SolidWorks 3D modeling - Familiarity with electric vehicle design (especially scooters) - Knowledge of mechanical and electrical component integrati...
I'm in need of a contemporary, high-end logo for my motor yacht, Bella Luna. This logo should not incorporate any traditional boat imagery or sails, but rather a C-shaped moon, using a sleek black and silver palette. I found one that I did like the overall version but it is a little thin but have attached below as well as a similar boat (not ours) but same style back. PLEASE READ - Do not offer boats, sails. Please do not offer in multiple versions, raised or on letter head in multiple dimensional views - to save you time & energy. I need a sleek logo on a white background in black in silver. Our last name is C So thinking a crescent moon. "Port of Lake Perry" Key Aspects: - The design must reflect a modern aesthetic - The use of a C-shaped moon is vital -...
...design a mechanism that allows #2 plastic tiny parts to move up and down from a rotating movement of a tiny DC motor. The specifics of the project are detailed in an attached PDF and even includes a small video (video include only #1 tiny plastic part) - I am looking for freelancers who can provide a detailed project proposal, demonstrating their understanding and approach to the task. - The project is time-sensitive, and I need it completed as soon as possible. Ideal skills for this job include: - Proficiency in CAD software (Blender/AUTOCAD/Pro Engineer/Solid Works) - Experience in designing mechanisms (locking unlocking systems, motor gears and accessories) - Understanding of motor-driven movements and gearboxes - Ability to interpret and work from detailed sp...
I'm looking for a comprehensive tutorial on how to simulate electronic components, specifically electric motors, using Ansys Electronics Suite (Twin Builder). The tutorial should be detailed and step-by-step, guiding me through setting up a simulation, solving it, and interpreting the results. Please include in your application: - Relevant past work, particularly any tutorials you've created or projects you've completed using Ansys. - Your experience with Ansys Electronics Suite and Twin Builder. - Any detailed project proposals you may have. There's no rush on this project, but I would appreciate it if we could keep communication open for any further details or clarifications you may need. I'm available for calls as necessary.
I'm in need of a Google Sheets expert who can assist me in creating a comprehensive motor insurance tool. This tool should be capable of calculating prices, generating PDF quotes, and producing comparison sheets for all the motor insurance products we have. Key functionalities of the tool: - Price Calculation: The tool needs to compute prices based on specific formulas. - PDF Generation: It should create PDF quotes for clients. - Comparison Sheets: The tool must be able to generate comparison sheets for our various motor insurance products. For the price calculation, we will be using data from other sheets, which include: - Premium Rates: The tool should be able to pull current premium rates for price calculations. - Vehicle Details: The tool needs to factor in ...
I'm looking for a skilled Bahasa Indonesian content writer with a strong understanding of Android apps and games. The main task will be crafting informative descriptions for my website. These descriptions should cover: - Key features of each app/game - User benefits - Objectives of the apps/games Ideal candidates should have: - Excellent command over Bahasa Indonesian - Prior experience in writing website content, particularly for Android apps/games - Ability to convey information in a clear, engaging manner - Reply to these questions How many hours are you available in SLACK ? Are you confident to post & select the best apps and give best Android tips to the users
Background: The ESP Stepper Motor Server is a library designed for ESP8266 and ESP32 microcontrollers to control stepper motors. Currently, the project uses a custom ESP_FlexyStepper class for motor control. This library is know to have jitter issues of the motor. We need to replace ESP_FlexyStepper with the standard AccelStepper library throughout the project and still be able to control multiple motors at the same time. Objective: Refactor the ESPStepperMotorServer and related components to use AccelStepper instead of ESP_FlexyStepper for all motor movements and configurations. Deliverables: 1. Refactored ESPStepperMotorServer using AccelStepper. 2. Updated related files and classes to support the AccelStepper integration. 3. Brief documentation of any sig...
I'm in need of a skilled 3D printing professional to assist in prototyping mechanical parts. The preferred material for these prototypes is Nylon. Ideal Skills and Experience: - Proficient in 3D printing technologies, specifically for mechanical parts. - Experience working with Nylon and understanding its properties for prototyping. - Ability to create accurate and functional prototypes in a timely manner. Note No Threaded Holes required (I will tap the holes upon reciept)
I'm looking for an experienced Arduino programmer to help with a project involving controlling 16 stepper motors simultaneously for a robotics project. The main objective is to enable movement and navigation. Key Requirements: - Proficiency in Arduino programming - Extensive experience with controlling stepper motors - Understanding of robotics and navigation - Ability to program simultaneous movement of motors Please, only apply if you have a portfolio demonstrating your relevant experience.
I'm seeking a native Bahasa Indonesia translator with a knack for copywriting. The job involves translating and adapting content from English to Indonesian for various Android-related materials, including apps, games, collections, and FAQs. Key Requirements: - Native Bahasa Indonesia speaker with excellent command of English - Experience in copywriting and translation, particularly for tech-related content - Familiarity with Android platform is a plus - Ability to convey a casual tone in the translations, targeting general consumers - Attention to detail and ability to meet deadlines Your engaging and relatable translations will help connect Indonesian Android users with the content in a meaningful way. Proposed bid 5 US$ / hour Long term , 6 hours per week
I'm in need of a versatile virtual assistant who can handle a variety of tasks, primarily client interaction via live chat. Harus bisa bahasa indonesia dan inggris Key Responsibilities: - Scheduling and calendar management - Data entry - To-do list management - GitHub updates - Primarily, responding to clients via live chat Ideal Skills: - Excellent communication skills for client interactions - Proficient in data entry - Familiar with GitHub - Exceptional organisational skills for managing schedules and to-do lists This role is critical in ensuring smooth operations and maintaining high levels of client satisfaction. Looking for someone tech-savvy and ready to assist.
...be stored in our database, the pricing information will need to be looked up, based on each vehicles information. Ideally, vehicle information will be loaded using Vehicle Databases API. This vehicle information will be used to look up additional information to calculate the service price. The script should use Parts Tech API to find the parts needed to complete the service An API, such as MOTOR will be needed to retrieve repair times. Overview of how it should work: Customer selects their vehicle ---> Vehicle Information is temporarily stored to complete next steps ----> Customer selects service (quiered from database) ---> Relevant vehicle information is based to Parts Tech along with parts listed to complete service (as returned from database) ---> Part and P...
Vendo mi proyecto implementado en XML y Soap, utilizando el motor de base de datos MySQL
...known other than some privacy and also enables him to live a normal life like any learner who loves to look forward . Therapeutic measures: The working mechanism will interrupt the letter from the optical sensors (small camera) located at the base of the ring in contact with the surface of the book and send it via the sender (the Arduino was programmed according to the master letter, its automatic motor works in Braille to enter and exit the hole) to heal to process the text and transfer it to the other base which is in contact with the index finger from the inside and which is on the Braille cell which consists of 6 holes which are also the basis of the Braille path from which the blind understand, and after the sender sends the chosen letter, it is interpreted in the Braille c...
