Welding jobs

Integration of Displacement Sensor and Intel RealSense with FANUC Robot for Seam Tracking Job Description: We are looking for a skilled freelancer to assist with integrating a displacement sensor (such as Panasonic HG-C1200) and Intel RealSense camera with a FANUC robot (R-30iA controller) to enable precise seam tracking for an automated welding setup. The freelancer will be responsible for interfacing both the sensor and RealSense camera with the robot, setting up communication, and writing the necessary programs to control robot motion based on real-time displacement and vision data. Responsibilities: 1. Sensor Integration: • Connect a displacement sensor (e.g., Panasonic HG-C1200) to the PC using Ethernet/IP, RS232, or another suitable communication protocol. • In...

...the handlebars of the man’s bike is 420 mm, whilst that of the woman’s is 630 mm. The width across the pedals is 360 mm in both cases. Your good friend Fred has offered to help build the bike rack and he has access to the following materials and equipment: square section steel tubing, 25 mm × 25 mm × 2 mm thick steel plate, 8 mm thick steel strips, 25 mm wide by 6mm thick brazing and welding gear a powered hacksaw a pillar drill Design a suitable rack that can be made using Fred’s materials and equipment. It is not necessary to worry about stresses: the materials are capable of exceeding the strength requirements of any design. In addition, the rack should be designed to ‘look right’. As part of the report, you sho...

...sqft. Employees - +500 Fabrication Capacity - 80,000-100,000 metric tons annually. Certifications - AISC, CCBD approved fabricator, CCBD approved ASNT level 3 NDT utilizing UT RT and MPI methods, Bureau Veritas ISO and EN, OHSAS. Quality control - AISC and CCBD approved Quality Systems Manual. Optional project pre-assembly prior to shipping. Capability - CNC cutting/welding/Milling, Laser Cutting, submerged arc welding, long span metal press brake (38'), Punch press, Plate rolling, Straightening, Edge Planer, Stamping, Sand Blasting, I beam y-axis rolling and x-axis hard-way bending. Steel frame packaging with Skids. Coatings - Zinc rich epoxy primer (standard), epoxy paint, Galvanizing, Powder coating, Fluorocarbon paint. Coating thickness...

...Proficiency in modern jewelry design and creation - Ability to interpret sketches into physical pieces - Experience working with a variety of metals and stones - Proficiency in setting various types of stones - Skills in polishing and finishing jewelry pieces - Familiarity with CAD software for jewelry design - Attention to detail for intricate designs and quality control - Experience in jewelry welding techniques - Ability to repair and adjust jewelry pieces - Proficiency in custom engraving and personalization - Knowledge of techniques for surface texturing and finishing - Experience with soldering techniques for jewelry - Skills in wax carving for mold making Please note, I will be providing sketches of each piece, along with the necessary materials. Your task will be to brin...

...manufactures: Welding Electrodes & MIG Wires: High-quality, certified products for industrial use. Paints: Wall and metal paints under the brands Acrylux and Metshield, offering superior quality and innovation. Project Scope We need a freelancer to assist with: Logo Redesign: A modern, professional logo representing both product lines or something abstract that can be resonated with b&h group, but B&H has to be written Brand Theme: Cohesive color palette, typography, and brand guidelines. Business Card Design: Professional design with updated branding. Product Catalogue: High-quality design showcasing welding consumables and paints with specifications, features, and certifications. Requirements Style: Minimalist, industrial, and contemporary. Colors: Professi...

I'm looking for a seasoned designer specialized in safety gear, primarily welding jackets and accessories. The focus should be on creating designs that are durable, comfortable, and heat resistant. Key Requirements: - Extensive experience in designing safety gear, particularly for welding. - Ability to create designs that prioritize durability, comfort, and heat resistance. - Innovative thinking to incorporate unique yet practical design elements. - Strong understanding of industry standards for safety gear. - Proficient in using design software. -Fire Resistant materials - 8-10 designs needed for jackets, hoodies, button up shirts. Looking forward to your bids.

I'm looking to create business shirt that is Christmas themed. My business is Powdercoating / Welding. I'm not picky! In my mind I have santa riding in on a sleigh with a "cloud" of powder underneath the sleigh (kind of like magic) and santa smoking a cigar. I also have envisioned a welding machine and possibly a welding hood under the tree that santa is flying towards. The tree being decorated your classic tree type of look. I would like somewhere on the design saying "santa's sleighing the game, so should you!" I'm going for street wear / an edgy style for this shirt design. It's not really intended for kids but more for an older audience! Really excited to see what you guys come up with! My business name is "Shopcat...

I'm seeking an engineer or a technician with experience in RF technology and outdoor equipment. The project involves designing a transmitter a...technology for the transmitter and receiver - System designed for outdoor use - Optional: weatherproofing for the transmitter and receiver - Initial testing to confirm reliable operation at 600ft Ideal Skills: - Proficiency in RF technology - Experience with outdoor equipment - Ability to design optional weatherproof systems The ultimate goal of this project is to create a wireless remote for welding which can be controlled via a potentiometer. Please provide details of your relevant experience when bidding. also will have a blue tooth speaker built into the remote (transmitter with potentiometer) need a bt amp 5w output with Bluetoo...

I'm in need of a professional website for my welding and fabrication business. The primary purpose of this site is to generate leads from various sectors including commercial, residential, and industrial. Key Features: - Highlighting Services: The site should prominently feature our offerings, especially custom metal fabrication and repair services aimed at commercial clients. - Portfolio Showcase: There should be a section to showcase our previous work and projects, as visual impact is crucial in this industry. - Include detailed pages for each service offered, explaining benefits and methods. - Implement a user-friendly contact form for potential clients to reach out easily. Ideal Skills: - Web Development: Proven experience in creating lead-generating business websites is ...

I'm looking for a professional CAD designer who can generate detailed shop drawings from an existing 3D SolidWorks model of a steel workbench. The selected freelancer wi...existing 3D SolidWorks model of a steel workbench. The selected freelancer will need to: - Translate the provided 3D model into professional shop drawings for fabrication. - Incorporate a weldments cut list table within the drawings. - Ensure all views and details meet industry standards for welding and assembly. Ideal skills and experience for this job: - Proficiency in SolidWorks and CAD software. - Previous experience in creating shop drawings for steel fabrication. - Strong understanding of welding and assembly industry standards. I can provide my model that I have generated. Model is in 2024 ...

See attached drawing and provide a welding procedure. Lug is attached to a vertical steel column. The hydraulic cylinder pushing the lug upwards to move the column up. There will be at least 4000 kg weight on this lug. There are 10 identical lugs and total structure load is 40,000 kg. Submit results , model and welding procedure. More details: What type of lifting lug will you be using? Heavy-duty lifting lug What welding technique will you prefer for the lifting lug? Stick welding What material will the lifting lug be made of? Mild steel

I'm searching for a skilled recruiter who can help me find a contract-based, on-site Engineer specializing in boat building. Key Qualifications: - Extensive experience with hull design. - Strong knowledge in marine engineering. - Advanced proficiency in CAD software for boat design. Id...Experience: - Proven track record in boat building engineering. - Excellent understanding of marine mechanics. - Exceptional CAD software skills. Please, only apply if you can find candidates who meet these qualifications. The recruitment process should ideally be completed within 3-4 months. The engineer will primarily work on recreational boat building projects. The candidate should have Steel Welding & Cutting experience to meet the project requirements. The position i...

we are looking for a local recruiter with a focus on mid-level technical positions. The specific roles are welders. Ideal Skills and Experience: - Proven track record in recruiting technical positions. - Familiarity with metal welding roles. - Ability to assess mid-level candidate competencies. - Excellent networking and sourcing skills. - Knowledge of the local labor market. Key Responsibilities: - Identify and attract mid-level locksmith metal or welders. - Conduct initial candidate screenings. - Coordinate interviews with potential candidates. we pay a fee per hour per employee. on average, our local recruiters earn 400 euro per week

I've deve...a steel workbench in SolidWorks. However, due to time constraints, I require assistance in crafting the professional shop drawings from my model. Requirements: - Create detailed shop drawings ready for fabrication. - Include accurate dimensions, annotations, and material specifications. - Incorporate a weldments cut list table. - Provide views and details that adhere to industry standards for welding and assembly. I will supply: - The complete SolidWorks model. - Any specific instructions or preferences for the drawings. Ideal candidate: - Proficient in creating shop drawings and weldments cut lists. - Strong understanding of fabrication requirements. - Familiar with the use of Steel in fabrication. Please indicate your timeframe and pricing. Looking forward to ...

...The role will involve conducting FSI (First Stage Inspection), PSI (Pre-Shipment Inspection), witnessing cutting and measuring, and reporting on all observations. Key Responsibilities: - Inspect overall functionality of metal components - Ensuring measurement accuracy, material quality and surface finish - Reporting key measurements: dimensions, angles and surface finish - Check the quality of welding joints for strength and durability. - Verify the material certifications provided by the supplier. Meeting: A meeting will be arranged to discuss the requirements in full. Ideal Skills and Experience: - Experience in quality control, particularly with metal suppliers - Proficient in using measurement tools: caliper, DFT gauge, radius gauge, micrometer, tape meter and protractor o...

...The role will involve conducting FSI (First Stage Inspection), PSI (Pre-Shipment Inspection), witnessing cutting and measuring, and reporting on all observations. Key Responsibilities: - Inspect overall functionality of metal components - Ensuring measurement accuracy, material quality and surface finish - Reporting key measurements: dimensions, angles and surface finish - Check the quality of welding joints for strength and durability. - Verify the material certifications provided by the supplier. Meeting: A meeting will be arranged to discuss the requirements in full. Ideal Skills and Experience: - Experience in quality control, particularly with metal suppliers - Proficient in using measurement tools: caliper, DFT gauge, radius gauge, micrometer, tape meter and protractor o...

I need a professional mechanic to cut off my muffler and weld a straight pipe in on my Volkswagen car. The straight pipe should be made of stainless steel. Ideal Skills: - Proficient in vehicular exhaust modifications - Experienced with Volkswagen models - Skilled in welding stainless steel, tig preferable Experience: - Prior work with muffler removal and straight pipe installation - History of working with stainless steel - Mechanic certifications not needed but I need pics of your welds The new exhaust should be designed to enhance the sound quality.

...The role will involve conducting FSI (First Stage Inspection), PSI (Pre-Shipment Inspection), witnessing cutting and measuring, and reporting on all observations. Key Responsibilities: - Inspect overall functionality of metal components - Ensuring measurement accuracy, material quality and surface finish - Reporting key measurements: dimensions, angles and surface finish - Check the quality of welding joints for strength and durability. - Verify the material certifications provided by the supplier. Meeting: A meeting will be arranged to discuss the requirements in full. Ideal Skills and Experience: - Experience in quality control, particularly with metal suppliers - Proficient in using measurement tools: caliper, DFT gauge, radius gauge, micrometer, tape meter and protractor o...

...supports, adjusting based on the span length and anticipated loads. - Cross Bracing: - Use 2” x 2” x 0.125” or 0.188” (3/16-inch) thickness for diagonal bracing. - Roof Support Beams: Use 4" x 4” members. 2. Aluminum Connections and Fasteners - Base Plates: Use reinforced base plates to anchor the vertical posts securely into the concrete foundation. - Welding Guidelines: Specify certified welders and quality control measures for any required welding on site. - Load Calculations: Include detailed load calculations for wind resistance, ensuring all elements meet or exceed Florida building code requirements. - Coating Material: Apply a weather-resistant coating to the aluminum for longevity and protection against elements. - Corrosion Pro...

...supports, adjusting based on the span length and anticipated loads. - Cross Bracing: - Use 2” x 2” x 0.125” or 0.188” (3/16-inch) thickness for diagonal bracing. - Roof Support Beams: Use 4" x 4” members. 2. Aluminum Connections and Fasteners - Base Plates: Use reinforced base plates to anchor the vertical posts securely into the concrete foundation. - Welding Guidelines: Specify certified welders and quality control measures for any required welding on site. - Load Calculations: Include detailed load calculations for wind resistance, ensuring all elements meet or exceed Florida building code requirements. - Coating Material: Apply a weather-resistant coating to the aluminum for longevity and protection against elements. - Corrosion Pro...

Looking for someone to design a logo for my welding business, I have a very basic design, I just someone with the skill set to spruce it up for me, I have an idea of what I want done to my attached photo.

Company name: LNR Fabrication Incorporated I'm in need of a logo that embodies a modern aesthetic, using a monochromatic palette of black and white, with a striking blue accent. This logo should be primarily text-based, so an excellent grasp of typography and design is crucial. A welding rod burning in the background Or maybe onto one of the letters on the logo Ideal Skills: - Strong typography skills - Modern design expertise - Proficiency in monochromatic design with bold accents - Experience in creating text-based logos.

I'm looking for a welding machine primarily for home DIY projects. I'm particularly interested in Stick welding, as that's my preferred method for these tasks. Most of the materials I'll be working with are steel, so the machine needs to be capable of handling that. Ideal Skills and Experience: - Knowledge and experience in welding machine design and fabrication - Understanding of Stick welding techniques and requirements - Expertise in working with steel Please include your portfolio and past work examples related to this project in your proposal. The welding machine should use a DC power source.

I'm looking for a welding machine primarily for home DIY projects. I'm particularly interested in Stick welding, as that's my preferred method for these tasks. Most of the materials I'll be working with are steel, so the machine needs to be capable of handling that. Ideal Skills and Experience: - Knowledge and experience in welding machine design and fabrication - Understanding of Stick welding techniques and requirements - Expertise in working with steel Please include your portfolio and past work examples related to this project in your proposal. The welding machine should use a DC power source.

As a welder, I am on the lookout for a skilled CAD designer who can produce both 3D and 2D designs for vari...Incorporate detailed measurements and material specifications into the designs - Calculate the amount of iron and different profiles needed for manufacturing - Very good communication in English The main purpose of these CAD designs is for manufacturing, so precision and attention to detail are crucial. Ideal candidates should have extensive experience in CAD software and a strong understanding of welding and fabrication processes. The CAD designs should be delivered in DWG/DXF formats. Designs should follow general industry guidelines and best practices. The designs must include high levels of detail and precision for manufacturing. The project needs to be completed withi...

...Executive Drawings - Front, side, and top views of the tank. - Detail drawings for the sliding cover mechanism. - Cross-sectional views showing insulation placement and material specifications. - Necessary construction details that will aid in the fabrication process. - Constructive Specifications - Materials to be used (specifically SS304), thickness of the tank walls and insulation, welding and assembly instructions, and safety factors considered in the design. 3. Additional Information: 27. Pressure Rating: The tank should handle internal pressures up to [specify pressure in bar/psi]. If there are any assumptions made during the design process or if further information is needed to complete these drawings, please let me know, and I will provide the necessary detai...

I need a professi...material, total weighing approximately 100-140 MT. The diameters of these silos will range from 2500mm to 3500mm for an NMDC project. The candidate will also be responsible for getting the drawings approved by MECON. Key Requirements: - All drawings should be delivered in AutoCAD (DWG) format. - The silo design must adhere to ISO standards. - Drawings need to include material specifications, welding details, and installation instructions. Please note that General Arrangement and Building Structure drawings will be shared post-discussion. The ideal candidate will have experience in silo design and a strong background in engineering and AutoCAD. A proven track record of working with ISO standards and getting designs approved by relevant authorities will be highly...

I need a professional to create a shop drawing for the steel support work at the roof for clay tile...already have an AutoCAD drawing; I need the shop drawing based on the available drawing. Key Requirements: - Deliver the shop drawing in DWG format. - Specific detailing needed for welding and bolt & fastener details. - Adherence to international standards is crucial for this project. - Incorporate load calculations to ensure the roof can handle weight. Ideal Skills and Experience: - Proficiency in AutoCAD and DWG formats. - Extensive understanding and experience with shop drawings for steel support. - Knowledge of international building standards and codes. - Detail-oriented with a focus on connection, welding and bolt/fastener details. - wind calculation in staad ...

I need an experienced graphic designer to adapt my existing circular logo into a rectangular format. The logo features a central welder illustration, the company name "CONTRACTOR'S," and the tagline "WELDING INC" in an arched style. Key requirements: - Remove the arch effect from the "WELDING INC" text and align it horizontally. - Adjust the logo's border to fit the new rectangular shape. - Maintain the overall aesthetic of the current design. The goal is to retain the logo's strong brand identity and visual appeal in this updated format. A solid border should be applied to the new rectangular layout. No new elements or text should be added to the redesign. Ideal candidates should have: - Proven experience in logo design and mo...

I'm looking for an expert in market analysis to help me identify the Serviceable Available Market (SAM) for cutting and welding machines. Your task will be to provide a comprehensive understanding of the SAM, with the potential of including a competitive analysis if deemed necessary. Ideal skills and experience for the job: - Proven experience in market research and analysis - Familiarity with the cutting and welding machine industry - Ability to conduct competitive analysis - Excellent data interpretation skills

**Update: Please share pictures of real products built from your drawings/design when sending your proposal.** Executive Drawings for Compact 3-Axes CNC Machine. Description: I’m seeking an experienced mechanical designer to create executive drawings for compact machinery intended for automated laser processing (precision cutting, marking, and welding). Design references will be provided to guide the project. Scope of Work: Produce detailed technical drawings, 3D models, and assembly instructions for a small-footprint laser processing machine. Utilize a provided enclosure design and create detailed drawings for all structural components, doors, ventilation, and safety features, with a focus on ergonomics, usability, and operator safety. Ensure manufacturability through the ...

I'm in need of a skilled MIG welder for a stainless steel fabrication project. The job involves shaping and assembling stainless steel components, so expertise in manipulating this material is key. Ideal Skills & Experience: - Proficiency in MIG welding - Extensive experience with stainless steel - Background in fabrication work - Ability to read and interpret blueprints - Attention to detail and commitment to quality

...a drawing package that my manufacturer can use. I need both 2D technical drawings and a 3D model. The 2D drawings should include full dimensioning, manufacturing notes and tolerances. While the aesthetic appeal of the pitcher is important, the primary focus should be on ensuring ease of manufacturing. The preferred manufacturing techniques for this design will be laser cutting, folding, and welding. I would appreciate your expertise in finding an effective solution to prevent leaking at the seam between the head and base. Ideal Skills: - Proficiency in CAD software. - Experience in product design and manufacturing. - Understanding of stainless steel properties and manufacturing processes. - Excellent communication skills for collaboration and refining the design. I look forwa...

Hello Princess, I would need a logo for my client, I would like to have 3 different ideas that I can present for the client. Here is some basic info about the company: Company name: Sesonkistar oy Facebook: Basic information: Special foundation construction services (Anchoring and piling of retaining walls in trenches), off-road welding, heavy equipment installation work. Client request: The logo could be made in both black and red.

We’re seeking a skilled CAD Mechanical Engineer to join us in designing high-tech industrial machinery and equipment, such as assembly lines, automatic welding systems, CNC machine tools, presses, food processing machinery, and laser cutting machines. This is a remote position, with the potential for exceptional candidates to relocate to Italy after a few years of collaboration. Responsibilities: - Design industrial machinery and equipment with precision and attention. - Create 2d mechanical drawing according to the client standard. - Collaborate on projects with flexibility but maintain availability for urgent needs. Requirements: - Background in mechanical engineering with hands-on experience. - Proficiency in at least one of the following: SolidWorks, Inventor, Creo, or A...

I'm looking for a logo featuring a bee wearing a welding helmet. The text 'Roma Tools' should also be incorporated into the design. The style should be distinctly cartoonish, so an ability to create playful, engaging designs is essential. Key Requirements: - The bee should be the primary focus of the logo, so it should be more prominent than the other elements. - The design should be modern and appealing, without losing the fun, whimsical nature of a cartoon style. - Experience in creating cartoonish logos is a plus. - A good understanding of balance and proportion in design is important, to ensure all elements of the logo are well represented. Please note that I did not specify a color scheme, so I am open to suggestions. Bright, bold colors are a possibility, but...

I'm looking for a professional to fit industrial pipes and instrumentation according to provided drawings. The primary materials to be used are Steel and PVC. The job includes working with various fittings such as Valves, Couplings, and Flanges. Key Requirements: - Experience with fitting in...of this project. This project will require only specific safety measures. The project is expected to take 1-3 months to complete. The fitting work will be conducted in a manufacturing plant. All workers must use PPE such as helmets, safety glasses, gloves, and steel-toe boots. Testing and inspection services will not be required. The freelancer must provide specific tools such as pipe cutters, welding equipment, and torque wrenches. The freelancer must provide additional support for th...

I'm looking for a skilled graphic designer to create a modern-style logo for my welding company. The logo should not include the company name. While I have not specified particular elements or symbols to be included, the designer should be knowledgeable about welding and able to incorporate relevant imagery in a subtle way. I would like to see a minotaur as a welder. His face needs to be half covered by a welding mask and half naked only showing his skull. He needs to wear a welding or blacksmith apron. In his hand, he needs to hold a welder and a hammer on the other hand.

I'm in need of a professional mechanical engineer with experience in designing and drawing for API 650 storage tanks. The project involves the preparation of mechanical design, general arrangement (GA) & fabrication drawing, as well as Finite Element Analysis (FEA) for any supports or cleats. The delivera... All designs and drawings need to be delivered in both PDF and DWG formats, adhering strictly to the API 650 standards. Ideal candidates should have: - Extensive experience with mechanical design and fabrication drawing - Proficiency in using TANK software - Familiarity with API 650 standards - Ability to deliver in both PDF and DWG formats. Please note that no additional details such as welding details, material specifications, or assembly instructions are requir...

...engineer (experience of 2-4 years) who can operate CNC machines, perform welding tasks, and oversee the manufacturing process of automotive parts. Key Responsibilities: - CNC Machine Operation: You will be responsible for setting up, programming, and operating CNC machines to create precise components. - Welding: Your skills in welding will be essential for assembling parts and ensuring they meet quality standards. - Overseeing Manufacturing Process: You will supervise the entire manufacturing process, ensuring it runs smoothly and efficiently. - Install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements Ideal Skills: - Proficient in CNC machine operation - Skilled in welding - Experienced in overseeing manuf...

I am seeking an experienced orbital welder who specializes in pipe welding, specifically with stainless steel pipes. The primary application of this project is within the pharmaceutical industry. Key Requirements: - Proficient in pipe welding with orbital welder - Extensive experience with stainless steel - Prior work within the pharmaceutical industry is a plus - Strict adherence to industry standards and safety regulations Your skills and experience should allow you to deliver high-quality, reliable welds that meet the rigorous demands of pharmaceutical applications. Please provide evidence of your previous work and relevant certifications. The project timeline for completion is 1-3 months. The pipes to be welded are small with a diameter of less than 1 inch.

I'm looking for a skilled Unity developer with expertise in robotics simulations. The project involves simulating a robotic arm in Unity, performing tasks related to welding, assembling, and 3D printing. Key Requirements: - Simulate a robotic arm in Unity - High-fidelity simulation with physical properties - Detailed movements with collision detection - Implement tasks like welding, assembling, and 3D printing Ideal Skills: - Proficiency in Unity - Experience in robotics simulation - Understanding of physical properties and collision detection - Knowledge of welding and 3D printing processes Robot specifications provided.

I need an expert to design a welded aluminum recreational boat for leisure cruising. The boat should be under 20 feet in size. Ideal Skills: - Marine Engineering - CAD Software Proficiency - Aluminum Welding Expertise - Boat Design Experience I'm looking for a professional with a solid portfolio in boat design and a deep understanding of welded aluminum's properties and advantages for this type of project. Your experience in designing boats suitable for leisure cruising will be invaluable.

I'm in need of a professional with engineering and fab...Responsibilities: - Measure and design the adapter from the radiator to the louver based on the specific requirements of the generator - Fabricate the adapter out of steel - Ensure the connection is a welded and or bolted type Ideal Skills: - Proficient in metal fabrication, especially steel - Experienced in creating industrial equipment adapters - Excellent measurement and design skills - Able to perform welding tasks Please note, the measurements for the adapter will need to be taken by the designer, so a keen eye for detail and precision is crucial. Needs to manufacture on site. The Job needs to be performed in a Caribbean Island. The company will pay for accommodation and travel expenses separately. It should take 1...

I'm in need of an experienced tool designer who can create a welding jig using Onshape or Solidworks. This jig will be primarily used in a fabrication shop and needs to be designed to handle steel. Key Requirements: - Proficiency in Onshape or Solidworks - Prior experience in designing welding Jigs - Understanding of welding jigs and their application in a fabrication shop Skills in CAD software and a solid background in tool design will be extremely beneficial. Looking forward to your expertise in bringing this project to life. We will provide you with STEP files When you quote, please include images of some jigs you have already designed

...design must also accommodate bending and welding for fabrication. Layered Design for Insulation: The bag should have layers to allow for the addition of insulated foam between the layers for temperature control. Lightweight: The overall design should be lightweight while still maintaining strength and durability. Sheet Metal File Format: The final design must be delivered in a sheet metal file, preferably compatible with Fusion 360. If you have experience with aluminum design, Fusion 360, and are familiar with the fabrication process (cutting, bending, welding), I’d love to see your portfolio and discuss further. Deliverables: Detailed sheet metal design file in Fusion 360 format (or a compatible format). Ready for plasma CNC cutting, bending, and welding. D...

...the mechanical pile splices shall meet the requirements of §715-01 Structural Steel. BASIS OF APPROVAL. The material will be evaluated for conformance with the material requirements, and product samples may be required to be submitted for testing. Manufacturers may submit their product for evaluation to the DCES. The submission shall include copies of installation drawings, specifications, welding procedures meeting the requirements of the Steel Construction Manual, engineering calculations, test results, and quality control procedures for the splice manufacturer. Stamped engineering calculations, performed by a New York State Licensed Professional Engineer with current registration, shall show that the spliced pile has a theoretical bending capacity of at least 95% of th...

...the mechanical pile splices shall meet the requirements of §715-01 Structural Steel. BASIS OF APPROVAL. The material will be evaluated for conformance with the material requirements, and product samples may be required to be submitted for testing. Manufacturers may submit their product for evaluation to the DCES. The submission shall include copies of installation drawings, specifications, welding procedures meeting the requirements of the Steel Construction Manual, engineering calculations, test results, and quality control procedures for the splice manufacturer. Stamped engineering calculations, performed by a New York State Licensed Professional Engineer with current registration, shall show that the spliced pile has a theoretical bending capacity of at least 95% of th...

I'm looking for a web designer to create a professional business website for us. This site will serve as a platform to showcase our skills, work experience, and personal information to potential clients. We run 2 business that cover a...who is creative and can make this as easy to navigate as possible. Key information: We have 2 business, 2 domains. Business 1: Elevator company. Sales, service, modernisation. We manufacture, install and service all kinds of elevators Business 2: Engineering, manufacturing. We have in-house laser cutting, cnc press brake folding, cnc turret punching, in house spray booth, laser welding, our facility has a 20T crane for large scale work. If you have a creative approach and can deliver a sleek, professional site, I would love to...

I'm in need of comprehensive fabrication drawings for structural steel in a small precast panel warehouse (800m2). Key Requirements: - Detailed assembly drawings with full fabrication specifics and welding notes - Compliance with AS (Australian Standards) - 3D model to be produced to show precast panel cast in plate connections Ideal Skills and Experience: - Proficient in creating detailed fabrication drawings - Familiarity with Australian Standards - Previous experience with structural steel shop drawings