Motherboard pcb design jobs
I would like to get 4 layer pcb design service for the completed schematic in EAGLE CAD. I would like to work with an proffessional and experienced PCB designer in EAGLE CAD. Schematic file as images and .brd file will be shared physically at the next stage.
...experienced PCB designer to help with correcting and updating my KiCAD PCB design for an ESP32 shield. The project involves: - Improving the routing and trace layout to ensure all connections are finished according to requirements - Preparing a BOM file with all components ready for upload to PCBWay I have detailed connection requirements, so you won't need to help with defining them. However, your expertise in optimizing the routing and traces is critical for this project. Please read the requirements file for details. Don't hesitate to ask any questions. Ideal skills and experience for the job include: - Professional english level desirable. - Ability to think critically and identify potential issues / flaws in design. - Proficient in KiCAD w...
The project consist in the design of a CM5 carrier board whit specific requirements. The original idea is starting from a existing CM5 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM5 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) • USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) ...
I need a professional to redesign my prototype PCB. The goal is to eliminate the messy cables at the back of the board . Key Requirements: - PCB redesign to minimize or eliminate the need for external wiring - Integration of additional connectors into the PCB - Expertise in creating PCB designs that are neat and manageable Ideal Skills: - PCB design and engineering - Experience with integrating additional connectors in PCB designs - Strong attention to detail to ensure a clean design The primary function of the PCB has not been specified, but it is crucial that the freelancer understands general PCB functions and design principles. Please see the attached pictures for reference.
I need a PCB designed for a linear array of fewer than 10 LEDs. The main function of the PCB is to facilitate the LED layout. Ideal Skills and Experience: - Expertise in PCB design software - Experience with LED layout on PCBs - Knowledge of designing linear arrays - Ability to deliver compact and efficient designs Please provide a portfolio of similar projects you've completed.
I'm seeking a professional PCB designer to create an Analog Voltage to CAN interface PCB. The design complexity is intermediate and it should support the CAN 2.0 protocol. Depending on the cost-effectiveness, I'm considering needing several versions of the PCB, ranging from 3 to 8 channels. In addition, I have some basic existing circuits with Analog outputs that will require a CAN output to be integrated. Ideal Skills and Experience: - Proficiency in intermediate-level PCB design - Extensive knowledge and experience with CAN 2.0 protocol - Prior experience in designing multi-channel PCBs - Ability to integrate CAN output into existing circuits - Excellent problem-solving skills to ensure cost-effectiveness
I'm in need of a PCB designer who can create a compact PCB for prototyping purposes. This board will need to accommodate a microcontroller, various sensors, a power supply, and Bluetooth components. Specifically, I want to gather data from a sensor (e.g. thermometer) and send that data via Bluetooth to a receiving device (iPad). The PCB will need to be powered by a 3.7 LiPo battery. I'll need all the files, so I can print at PCBWay. The board will need to be no larger than 26 mm by 30 mm. The components will need to lay flat on the board so the overall height is less than 4mm. Ideal Skills: - PCB design - Knowledge of compact design principles - Experience with prototyping PCBs Please, only apply if you have significant experience in d...
I'm seeking an experienced PCB designer to create a Gerber file for a replacement relay for a vintage car. The PCB will incorporate a mix of analog and digital components, and it must fit within a specific housing. Size of PDB is 94.6mm x 35.1 The ideal candidate should have: - Proficient skills in PCB design and Gerber file creation - Experience with mixed component PCBs - Ability to work to specific size constraints It would be advantageous if the freelancer has experience in designing PCBs for consumer electronics, particularly in the automotive sector. Please be prepared to provide examples of similar projects you've completed.
CM5 Schematic and PCB design. Production files and BOM list. Periph Schematic and PCB Design . Production files and BOM list.
Design PCB as discussed in inbox
...INCREASE THE COST LATER ON. i AM AS OPEN AS POSSIBLE ON THE BID REQUEST. Tender Invitation Document Project: Design and Prototype of a Solar-Powered Multi-USB Charging Station Objective We invite bids from experienced electronics engineers or engineering firms to design, prototype, and deliver a fully functional, cost-optimized 20-port USB charging station. The solution must prioritize low manufacturing costs, fast charging capability, and robust commercial-grade durability while adhering to the outlined requirements. The winning bid will receive full technical documentation upon project award. Scope of Work The successful bidder will: Design and Develop: A single-sided PCB for a 20-port USB charging station incorporating all specified features. A fi...
I'm seeking an expert in PCB and hardware design for a specialized microcontroller project. There will be a defined board layout and initial choice of components. All boards you design shall have evluation board quality. It means that they will not actually go into real components and be used for internal purposes only. Ideal Skills: - Extensive experience in PCB and hardware design, including power supply, FTDI, UART, CAN, SPI/QSPI and I2C - Microcontroller and Microprocessor layout experience, especially industry-grade controllers like NXP, STM32, Renesas and Raspberry Pi CM - Knowledge about signal integrity, EMC and good design practices in general Requirements - all parts must be available and recommended on Mouser or Digikey - no Chi...
I need a professional to solder 7 wires of my Holy Stone 720e drone onto the board. The original solders are covered in a glue to protect them. I know which wires need to go where and that it is a quick task, but I just unfortunately dont have the equipment and the glue is annoying to remove. Ive cut the original wires (was replacing an arm) so you can see where the new wires need to go. I am in London, UK, and will not accept proposals from overseas, respectfully.
Job Title: PCB Design Freelancer for Medical Pain Relief Device Description: We are seeking an experienced PCB design freelancer to develop a compact, efficient, and reliable circuit board for our innovative medical pain relief device. The device combines TENS (Transcutaneous Electrical Nerve Stimulation) and ultrasound mechanisms to deliver effective pain relief. Responsibilities: 1. Design and develop the schematic and PCB layout for the device. 2. Ensure the design integrates both TENS and ultrasound functionalities seamlessly. 3. Optimize the PCB for size, power efficiency, and reliability. 4. Provide Gerber files and other required outputs for manufacturing. 5. Create a prototype design for initial testing and v...
Ideal Skills: - 3D Modelling: Proficiency in 3D design software is crucial - Ergonomic Design: Experience designing ergonomic devices will be highly beneficial, especially when trying it to apply to a specific hand size and grip style. - Understanding of Gaming Needs: Familiarity with gaming mice and their requirements. Crucial to know where to find the 3d scan of the choice mouse's internals. Hi. I am an enthusiast gamer who has been trying to find comfort for 10 years in a market where the shells provided ( no matter how ergonomic they are) did not deliver. The project aims to design ( copying a few pieces of other shells but consider it as doing it from scratch anyway) a 3d file of the shell that will contain a specific component and is made based off of my ow...
I'm looking for an expert PCB designer who can redesign my current PCB to incorporate more features, specifically aimed at enhancing its capabilities for a standalone IoT system. Key Requirements: - The PCB should be redesigned to support remote monitoring, data logging, and wireless communication. - It should also be capable of incorporating additional features without compromising the size or durability. Ideal Skills and Experience: - Extensive experience in PCB design and redesign. - Proven track record in designing PCBs for IoT systems. - Strong understanding of incorporating advanced features into PCBs. - Ability to enhance the performance of the PCB while keeping in mind the size and durability.
I need a PCB designed and laid out for a medium-sized consumer electronics product. The PCB should be as small as possible - ideally ~50mm x 50mm. Key Requirements: - Design a PCB suitable for consumer electronics - Layout the PCB and produce a Gerber file for manufacturing Ideal Skills: - Experienced PCB designer - Proficient with PCB layout software - Able to produce high-quality Gerber files I have prototyped with a breadboard and am now doing the same with a prototype PCB but want to get a proper PCB layout sorted with a gerber so I can get a professionally made up PCB for testing. I have a drawing of all the components and connections (see attached) but no experience of laying out a board. Not entirely sure how m...
...global clients, primarily focused on Printed Circuit Board (PCB) design and manufacturing. Our uniqueness lies in designing, prototyping, and developing diverse electronic hardware in a customized and highly precise manner. As a firm, we can transform your ideas or functional diagrams into electronic circuits or products that enhance the functionality of electronic devices. With a team of proficient engineers, we create exceptional electronic designs. Role Overview: R&D Engineer Location: Chennai, Tamil Nadu Key Responsibilities: • Product Development & Redesign: Develop new electronic products and redesign existing ones. Conduct research and testing on product concepts to improve functionality and performance. • Circuit Design: Design and d...
I'm in need of a professional with extensive experience in PCB design, particularly using Altium Designer. The primary requirements for this project include: - Developing a PCB layout design tailored for through-hole components. - Utilizing Altium Designer for the design process. - The specifics of the PCB's function and component types will be provided upon selection. Ideal candidates should have a strong portfolio of previous PCB design projects, particularly with Altium and through-hole components. Understanding of power supply, signal processing, and microcontroller communication is a plus.
I am facing an issue with my NVMe bifurcation drive which is not being detected by the BIOS. I have confirmed that my motherboard does support NVMe bifurcation, but the BIOS is not updated to the latest version. - Ideal candidates should be proficient in computer hardware troubleshooting, specifically with NVMe drives and BIOS configurations. - Experience with BIOS updates is crucial. - A keen understanding of NVMe bifurcation will be highly beneficial. I need someone who can help me get my drive detected and my system booting properly again.
I'm seeking a skilled PCB designer with experience in IoT devices. The task is to design a compact PCB (4x3cm or smaller) incorporating the STM32 microchip for UART, SIM800L (GSM), and NEO-6M (GPS). The design should also accommodate a buzzer, mini LEDs, and USB-C charging, with provisions for battery integration (details to be finalized). Key Tasks: - Optimize the antenna design for GSM and GPS to ensure the best performance. - Create compact and efficient layouts that can withstand the rigors of a prototype. - Transition existing code from ESP32 to STM32. Key Considerations: - The primary focus of the PCB design is compactness. The smaller the PCB, the better. - The IoT device will be powered by a rechargeable battery, so co...
Looking for a power engineer that can modify my AC to DC converter to be able to have more power than what it has right now. Must also be able to convert the Gerber to PCB and make modifications with proper simulation. Must be willing to start immediately and finish in less than 24hrs
I'm looking for an experienced software engineer to develop control software for my RGB LED project using the TLC5955 and STM32F411. I have the PCB ready, and the software needs to be written in stm32CubeIde. Key Responsibilities: - Develop software for individual control of RGB LEDs - Implement features including color changing effects, brightness control, and predefined patterns The ideal candidate for this project should have: - Extensive experience with STM32 programming - Proficiency in using stm32CubeIde - A good understanding of controlling RGB LEDs - Ability to create engaging and smooth color changing effects and brightness adjustments Please note that the software needs to allow individual control of each LED.
I'm in need of a proficient Embedded C programmer with extensive PCB design experience for a project focused on industrial equipment. Key Responsibilities: - Design a PCB with features for temperature sensing, motor control, water level controls, and process automation for a RO water treatment plant. - Implement necessary protections for ampere and voltage. Ideal Skills: - Expert in Embedded C programming. - Extensive experience in PCB design. - Prior work with industrial equipment PCB will be highly regarded. - Knowledge of consumer electronics and medical devices PCB design is a plus. Please note the ability to design a PCB that integrates all these features is crucial, as is the capacity to programme i...
...a skilled PCB layout designer to create an electronic board for a smart LPG gas meter. This device should be capable of remote monitoring, conducting usage analytics, detecting leaks, and identifying tampering. Key Features: - Remote Monitoring: The meter needs to relay information about LPG usage and status to a central server. - Usage Analytics: The meter should collect data over time to provide insights into gas consumption. - Leak Detection: The meter must be able to identify if there is a gas leak and communicate this. - Tamper Detection: The meter should be able to notify when it has been tampered with. Communication Method: The smart LPG gas meter should use a cellular network for remote monitoring. Ideal Skills and Experience: - Extensive experience in PCB layo...
I'm seeking a skilled professional with expertise in IoT development, PCB design, and radio circuit design to assist in the prototyping stage of my project. The primary purpose of the IoT Arduino PCB is to carry out various tasks, including IoT, PCB, and radio circuits. Key Requirements: - Extensive experience in IoT development - Proficient in PCB design - Skilled in radio circuit design - Able to help move project from prototyping to final production - Capable of innovative thinking for diverse task applications Your role will be instrumental in advancing this project. Your skills can help transform this prototype into a successful final product.
...an experienced PCB designer to enhance my existing design. The PCB will integrate 2 high power relay-based motor controllers, with one of the controllers designed for speed control using PWM (Pulse Width Modulation). The whole project will be powered by a 12V-14V car battery. One motor have 10A max current and the other one have 60A max current. The whole project is controlled by an ESP32 micro controller. Also i would like to integrate a 12V to 5V stepdown converter to power the ESP32. Key requirements: - Add relay motor control for forward and reverse motion. - Incorporate speed control for one motor with PWM. - Integrate overcurrent protection into the PCB design. - Integrate 5V stepdown converter for ESP32 Ideal candidates should have: - Strong ...
I'm seeking a microcontroller specialist to assist with an ultrasonic speaker application primarily for sound transmission. This project will also involve PCB production. Key Responsibilities: - Design and implement an ultrasonic speaker system primarily for sound transmission. - PCB design and production for the system. - Utilize a microcontroller for system control and operation. Ideal Candidate: - Extensive experience with microcontroller-based projects. - Proven track record in designing and producing PCBs. - Knowledge in ultrasonic technology and sound transmission. - Ability to work independently and deliver high-quality work on time.
I need a professional PCB designer to help me design a 4 or 6 layer PCB in EasyEDA. The PCB is intended for use in consumer electronics, specifically for signal processing tasks. I have a complete schematic for the PCB, so your main task will be translating this into a robust, manufacturable PCB design. Ideally, you should have experience with PCB design for consumer electronics and signal processing.
Hi there I did read your project description and it looks you are looking for an electronics engineer having experience in circuit, PCB layout designing, and microcontrollers coding/firmware development. My name is Engr. Saddam Gul, I am an electronics engineer having 5+ years of experience in circuits designing, PCB layout designing, and embedded system microcontrollers (Arduino, ESP32, FPGA, C2000, STM, and Rpi) coding/firmware development. I have successfully executed numerous complex projects, which you can view in my portfolio as samples. Please feel free to share more details about your project, and don't hesitate to contact me for any further discussions. Thank you Regards Engr. Saddam Gul
I'm looking for someone to assist with the fabrication of a PCB integrated with an array of SMD LEDs with the following properties: - The type of LEDs is chosen and the design of the board is ready (only in Gerber format, in the attachment). The person should use this to re-create the schematic drawing, BOM, placement file for assembly. There is no need for a new design from scratch, unless an obvious error is spotted. - It includes LEDs that does not appear in the stock of the intended supplier (i.e., JLCPCB). I need step-by-step assistance in handling this issue (how to order for them to stock etc.).
I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.
...looking for a skilled and experienced professional in raspberry pi or Arduino design and programming, with a strong background in home automation projects. Need to design with all components noted in image. Must provide links to purchase items to build working unit. Time Frame: 2 weeks Budget: as low as possible Ideal skills for this project: - Extensive knowledge and experience with raspberry pi or Arduino - Ability to design a user-friendly system - Proficiency in programming and troubleshooting - Creative problem-solving skills Program: Scan barcode and play audio based on barcode Audio can be paused, skip forward or back Led screen shows audio track #, battery life Requirements: ,schematic, PCB design, BOM ,components and website t...
I need an experienced PCB designer to develop a cost-effective PCB for me. This PCB should: - Communicate using Modbus RTU - Read data from 3 Modbus RTU Slave registers, with each slave having 5-10 Modbus Registers - Convert all read data into HART protocol (specifically HART 5) The primary function of this PCB will be monitoring, so the design should be tailored for efficient data tracking. Additionally, the PCB will need to be powered by a DC source, so the design should account for this. Ideal skills for this job include: - PCB design and development - Proficiency in Modbus RTU communication systems - Expertise in HART protocol conversion - Experience with DC-powered devices - Ability to create cost-effective solutions
...supported by the main board should include I2C, SPI, UART, ADC, RS485, and RTC. Deliverables Expected: 1. Three fully assembled and programmed PCBs ready for testing. 2. Complete source code for the project. 3. Schematic and Gerber files, including a pick and place file for PCB assembly. 4. Bill of Materials (B.O.M.) with vendor information. Ideal Skills and Experience: - Proficient in STM32 microcontroller programming and board design. - Extensive experience with thermocouple interfacing. - Knowledgeable in PCB design software and creating necessary files for assembly. - Able to provide high-quality source code and documentation. I have a detailed document ready for the hardware and software specifications and the software that needs to be written. I wil...
I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.
CM5 Schematic and PCB design. Production files and BOM list. Periph Schematic and PCB Design . Production files and BOM list.
...looking for an experienced engineer to help me with a project involving a DC motor, multiple sensors, and PCB design. Key Requirements: 1. **DC Motor Control**: The primary function of controlling the DC motor is speed regulation. 2. **Sensor Integration**: The project will involve the use of various sensors including: - Temperature sensor - Light sensor - Humidity sensor - Solenoid Valve - Flow Measurement - Sim Module - RTC 3. **PCB Design**: The PCB will need to cater for: - Signal processing and conditioning - Power management - Communication interfaces Ideal candidates should have a strong background in motor control, sensor integration, and PCB design. Expertise in signal processing, power manageme...
I'm working on a project that requires a PCB design for a prototype. I need a PCB designer proficient in EasyEDA who can output EasyEDA project files including the PCB design, schematic diagram, and Gerber file. Circuit Details in PDF File - PCB Design Updated
I need a PCB designed for the ESP32 S3 DevkitC-1. This is a prototyping project, so the design should be flexible and adaptable for different uses. i have provided the image ,design will have to be like that but with 44pins and screw terminals(22-left & 22p right) socket to plug esp32 s3 devkit c1,male jumper wires connector,and above mentioned screw terminal Key Requirements: - Design a custom-sized PCB, tailored to specific dimensions - Prototyping-focused design, allowing for adaptability - Knowledge in working with ESP32 S3 is a plus Ideal Skills: - PCB design - Experience with ESP32 S3 - Understanding of prototyping needs - Ability to work with custom size requirements
I am seeking a highly skilled Technical Report Writer with experience in FPGA development, PCB design, and electronic hardware integration to document a comprehensive report on the LVDS to MIPI CSI-2 video stream conversion project.
Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2C sensors.
I need a seasoned PCB designer to create a personal navigation device using an ESP32-S3. The low-power design will encompass various components such as a GPS, sensors buttons, and connectors. Key Features: - Incorporate ESP32 WROOM S3 and u-blox MAX-M10S GPS with chip antenna - Integrate a Speaker and 5 Pushbuttons - Include a Micro SD Card Slot and USB-C Connector - Have a Barometric Sensor, Accelerometer/Gyro, and Ambient Light Sensor - Implement a LoRA Radio and 4 connectors for battery & peripherals - Support LiPo charging and power management Board Dimensions: Approximately 44mm x 72mm Deliverables: - Altium Designer Schematic - Detailed Parts List (BOM) with supplier information - Altium Designer PCB Layout - Complete Fabrication data (Geber file...
We are looking for an experienced professional or team to handle the full design, development, and prototyping of a hybrid DVD player with integrated Android functionality. The ideal candidate should have expertise in both hardware and software development and be able to deliver a fully functional prototype. --- Key Responsibilities 1. Hardware Development: Design a custom PCB to support both DVD functionality and Android integration. Create a hidden mechanism for SIM and SD card slots. Ensure compatibility with Wi-Fi and 5G connectivity. Build and test a fully functional prototype. 2. Software Development: Develop the Android system for the device, including Google Play Store integration. Configure the system to support apps like WhatsApp, ...
I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on th...
