Hyperlynx punët

As your project lead, I'm seeking a seasoned PCB designer to design and develop a multi-layer PCB that focusses primarily on signal transmission. Your skills and experience should include: - Proficiency with HyperLynx LineSim, to utilise for this design. - Substantial expertise in multi-layer PCB design, specifically with a proven track record in signal transmission. - Problem-solving skills, with an ability to troubleshoot and optimise PCB performance for high reliability and effectiveness. Your main responsibility will be to create an efficient and reliable multi-layer design that meets our signal transmission requirements. I'm expecting clear communication throughout the project, and the delivery of accurate and comprehensive design documentation upon completion. ...

Need someone to help me with a crosstalk analysis using Hyperlynx, an electromagnetic simulation software tool. The analysis is of a power integrity nature, and I require a report of the results. Experience with Hyperlynx and crosstalk analysis is a must. Please contact me if you are interested in taking on this project so we can discuss further details.

I am looking for an experienced engineer to provide Power and Signal Integrity (PI & SI) analysis using Hyperlynx tool. The simulation we are looking to perform is crosstalk analysis, which requires both pre- and post-layout simulations. require your support to do the simulation hyperlynx software, frequency response, eye diagram, S-parameter extraction, Insertion loss, return loss, signal integrity etc, so needs to support and train step by step how to use hyperlynx simulation to upload the PCB board and run the simulation.

We are looking for some one who can take up work on PI analysis using Hyperlynx simulation tool and SI wave for the boards designed.

Small PCB design but includes critical traces: 16 x high speed differential pairs (100 Ohm controlled impedance). SI report from Hyperlynx or similar required for these at up to 16 Gb/s (simulate and provide eye diagram at 8Ghz). one 400 pin FMC HPC connector 4 x 160 pin socket 1 x USB otg connector 1 x power connector 1 x 50 GPIO connector Schematic provided by me in KiCad (free software). PCB layout in KiCad (can be converted from other formats) to be provided by freelancer along with PCB fabrication files. Signal integrity report to be provided by freelancer.

Small PCB design but includes critical traces: 16 x high speed differential pairs (100 Ohm controlled impedance). SI report from Hyperlynx or similar required for these at up to 20 Gb/s. one 400 pin FMC HPC connector 4 x 160 pin socket 1 x USB otg connector 1 x power connector 1 x 50 GPIO connector

- Perform Simulations on completed PCB / PWB board layouts with simulation tools such as Cadence Sigrity or Mentor Hyperlynx - Acquire and or create simulation models. - Perform or direct changes to the layout as needed to get desired simulation results. - Generate Simulation reports to provide feedback to Design Engineers and CAD Designers that include required changes needed to improve signal integrity. - Submit Engineering Change orders to release simulation results into AGILE PDM tool. - Drive creation and management of simulation library. - Develop company global simulation processes and standards - Provide basic simulation training to Design Engineers and CAD Designer teams.

This is Dinesh KS from Synergy circuits PVT LTD. (HBR Layout -Bangalore) We required your support to do the simulations in HyperLynx software, frequency response, eye diagram, S-Parameter extraction, Insertion loss, return loss, Signal integrity etc , So needs to support from our locations We will start this project within few days, but right now we don’t have input from client side, But we required the price details from you, so I sent example input, based on that provide the Quotation. The Example circuits are attached and below mentioned details are the Example inputs from SI simulation. Input schematic: attached. Material : Metron 6 Board thickness: 180 mil Stack up: 22-26 layers. Frequency: 6GBS Clock speed: 400MHz. Total signal: 12 signals from DUT to...

I have a high speed design contains Mobileye Q4 and LPDDR4 and Aurix as micro. I'm looking for some support regarding getting some simulation results for this and how-to perform simulation at same time .

Hey guys i have attached all relevant files below please take a look at them all before starting because they will help you very much with the assignment Here is the assignment sheet Verification Analysis Part 1 Using the reference file and Mentor Graphics Hyperlynx, focussing on just the SPI associated nets between U1 and U2. a. Run a batch analysis and identify any problems for crosstalk or impedance. (comment on results, screen shot alone is insufficient) [10 marks]. b. Produce a waveform simulation for the net S17_SPI_CLK, with clock speeds of 25 MHz and 50MHz, with R65 set to 330Ω. What is the delay between transmission at U1 and receipt at U2? Describe the waveforms at the transmitter and receiver, identifying what is happening. Change R65 to 33Ω an...

Please use HyperLynx 3D EM to design one antenna. The antenna can be of any type of patch antenna. Please define the specific operating frequency by yourself. Then, you can follow the lab instruction to design your antenna. Note: Please finish it independently, similar results found in the report will affect your final grade. 2. Report Requirements: In the “Report”, the following parts should be included: 1. Design goal - The operating frequency and the information of substrate (dielectric constant, thickness); 2. Layout picture - The dimension of antenna and transmission line; 3. Simulation Results - Please show the S(1,1) in dB, the value of gain/directivity, and the radiation pattern.

Please use HyperLynx 3D EM to design one antenna. The antenna can be of any type of patch antenna. Please define the specific operating frequency by yourself. Then, you can follow the lab instruction to design your antenna

1- Please use HyperLynx 3D EM to design one antenna. The antenna can be of any type of patch antenna. Please define the specific operating frequency by yourself. Then, you can follow the lab instruction to design your antenna. 2. Report Requirements: In the “Report”, the following parts should be included: a. Design goal - The operating frequency and the information of substrate (dielectric constant, thickness); b. Layout picture - The dimension of antenna and transmission line c. Simulation Results - Please show the S(1,1) in dB, the value of gain/directivity, and the radiation pattern.

Please use HyperLynx 3D EM to design one antenna. The antenna can be of any type of patch antenna. Please define the specific operating frequency by yourself. Then, you can follow the lab instruction to design your antenna. 2. Report Requirements: In the “Report”, the following parts should be included: 1. Design goal - The operating frequency and the information of substrate (dielectric constant, thickness); 2. Layout picture - The dimension of antenna and transmission line; 3. Simulation Results - Please show the S(1,1) in dB, the value of gain/directivity, and the radiation pattern.

Need a logo designed for a new project called "HyperLynx"

...and several of the modules are focused on high speed digital design and how it relates to radiated and conducted EMC performance. Your job will be to prepare powerpoint presentations that I will narrate. Your credentials: - 8+ years digital design experience - Experience with signal integrity optimization - Experience with board level simulations (e.g. spice, Hyperlynx) - PDN optimization experience (Hyperlynx or similar) - Familiar with industry standard textbooks/courses on signal integrity + digital design (Howard Johnson etc..) - Strong theoretical understanding of signal integrity - High attention to detail - Report/academic writing experience: Ideally you've been involved with writing technical reports or whitepapers. You have good English and...

Hello, We need a PCB simulation expert. Preferred software will be Hyperlynx or NI , unless the freelancer has some better suggestion The PCB is simple as it contains a 16 Bit microprocessor, Bluetooth, Analog, RTC and power supply for 3.3 Volt battery Please provide details of the simulation that you will perform Thanks Michael

Hello, We need a PCB layout expert, the PCB is to be made in NI Ultiboard or Mentor Graphics PAD/Hyperlynx Thanks Michael

Hello, We need a PCB simulation expert working in Hyperlynx or PADS The PCB to be tested is a 2 layer PCB with a micro controller and analog IC Thanks

I need a small Wi-Fi module to be designed based on RTL8189ES chip. Only power supply from 220VAC, chip antenna and chip external components required. PCB should be as small as possible. I need: - circuit; - PCB; - FULL manuals for each component; - PCB simulation in HyperLynx.

Any small design should work me. My only requirement it should be in Hyperlynx Please use “Mentor Graphics’ HyperLynx” to design one (just one is enough) of the following RF / microwave components: Wilkinson Power Divider, Coupled-Line Directional Coupler, Rat-Race Coupler, Quadrature Coupler, Microwave Filter, Wideband Impedance Transformer (please define the specifications by yourself (e.g. working frequency, bandwidth, substrate type, etc.))

Hello, We have a PCB gerber and we want to have PCB Analysis with below tools Hyperlynx PI, SI, DRC, Thermal, Analog Please get back with time and cost schedule

We are looking for an expert who can help us do a PCB simulation work. Below are the things we need: 1) Simulate about 50 nets 2) Design is in Pantheon format 3) 2 boards will be simulated. They are identical boards and we are trying to see the timing difference between both boards. 4...expert who can help us do a PCB simulation work. Below are the things we need: 1) Simulate about 50 nets 2) Design is in Pantheon format 3) 2 boards will be simulated. They are identical boards and we are trying to see the timing difference between both boards. 4) Simulation should give the signal strength, cross-talk and ringing characteristics 5) Input will be provided for Hyperlynx files 6) IBIS models will be provided We are looking forward to finding strong c...

Looking for a freelancer with a license for Hyperlynx PI. Must be able to use the software to do PDN analysis on a 6 layer PCB. Please forward your details and experience if you would like to bid. Thanks.