Yocto thermocouple jobs
...powering the device for up to 20 days. I'm looking for a freelancer who can help me create this device as soon as possible(in 2 -3 weeks may be). If you are experienced and have the skills to meet my specifications, please apply for this job. This should securely connect AWS IOT core MQTT broker. Need hardware, firmware and secure connect. IOT features needed: 1. Full detailed GPS tracking 2. Thermocouple connectivity with Internal and external temperature 3. Tilt 4. Humidly 6. Battery Level should last 20 days minimum. 7 Pressure 8. Size should be like cellphone size including battery. 9. Device should have certificate and securely bootstrap it. Hardware should be cheap and be approximately $25. If more needed let me know why? The firmware programming shall be flexibl...
We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.
I have wireless VINT HUB controlling 1x (4x digital input Phidget), 1x (4x digital output Phidget), 1x (4x thermocouple Phidget), and 1x graphic LCD Phidget. i have a toggle on switch, which i want to turn on a 3 phase heater, this heater is monitored by thermocouple to be able to be set at different temp. When temp is reached i want heater to turn on and off. Also have another toggle on switch which will turn on a 3 phase fan. Also have another thermocouple that is to be placed in product just to monitor temp in product as a reference. I would like both temp readouts on the LCD screen. Would like to use Python coding please.
Hello, I have a custom yocto image for coral dev, but the pci is not working. The issue seems to be related to the device tree. I have old device tree that works fine with kernel 4.14 but the current device tree on kernel 6.1 is not working. For more details please contact me. Here is the issue i have: root@coral-dev:~# lspci root@coral-dev:~# dmesg |grep pci [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait net.ifnames=0 pci=pcie_bus_perf [ 1.768491] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770620] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770645] imx6q-pcie: probe of failed with error -2 [ 1.796623] imx6q-pcie: probe of failed
Having trouble with the thermocouple errors - and Thermostats KLipper - Through Mainsail keeps reporting a thermocouple error, which we belive is coming from the pin layout.
Hello, I need someone to help with creating a yocto recipe to build electron for raspberry pi running wayland
Hello, I need help building Yocto (kirkstone) image for coral dev board. Currently I'm able to build the Linux itself and run it on the device but I need help to setup the GPU/VPU libraries (libimxdmabuffer, libimxvpuapi), gsreamer-plugins-imx package (and specifically the jpeg decoder) , the WiFI/Bluetooth adapter and move the image to MMC. Please let me know in your comment the following otherwise your application won't be considered: Experience with Yocto: Yes/No Experience with gstramer: Yes/No Access to Coral Dev Board: Yes/No I'll provide access to environment to setup and build the image. To finalize the project I'll need a procedure how to replicate your work to a fresh repository. As of now I'm using the following layer repo: (wip/kirkst...
I need some one to build temperature control device with k type thermocouple and relay control.(need PID control). You can use any microcontroller like PIC or Atmega I need PCB design, Firmware in c. I am attaching some documents which will help you to know more about it. The attached document is the same product that i want to develop. with model no REX-C100FK06-M*AN output is relay type. temperature range - 0-1200k supply - 220v AC, 50HZ/60HZ.
Deliver report to client on Latex as well as pdf format of 7 page on topic of thermocouple.
...run a Webkiosk on a RaspberryPi. The Webkiosk should be a browser running in fullscreen displayed over HDMI. The browser accesses a webserver that runs locally on the Pi. The website is not in the scope of this task. The goal is to find a fitting technological software stack to display the website. These questions will have to be answered: - Which Operating System? RaspberryPi OS, Buildroot, Yocto etc. - What display method: Display Server yes/no, which one? Alternative? - What browser: Chromium, Firefox.. The software stack must meet following requirements: 1. Free & maintained 2. Good user experience 2.1 Low boot time (the less the better): 2.1.1: 10-20 sec.: Ok 2.1.2: 20-30 sec.: Tolerable 2.1.3: > 30 sec: Too much 2.2 Boot Logo / Animation 2.2....
I need someone to help me with building boot2qt image for Raspberry pi and migrate qt versions and allow of compilation of plugins.
...other industries in the future. For example, the measuring of acidity, or the measuring of the quantity of oil in an oil tank at an oil refinery, the speed at which an industrial motor is rotating or vibrations in the ground for measuring earthquakes. It’s a really robust product. For an example of a sensor we use, this is a thermocouple and it measures temperature (Image 3), the two wires plug into the PLC and the long sensor sits in a tank, the thermocouple is the IoT device that sends the data out to the PLC. Basically, our product takes measurements from the physical world, such as how much water is flowing through a pipe in real time (Image 4), and then it sends this information to the electronic world via the internet. Once the software on the indust...
Objectives: Create a circuity and electrical diagram with the code for an Arduino temperate monitoring system Components: LCD 2X16 IC Green, Red, and Yellow LED Alarm system Type K thermocouple with MAX6675 Amplifier Communication port between Arduino and S7 PLC Peltier Component to cool down an electrical contractor PID Control system for the Peltier cooler The system is to monitor the temperature of an electrical component (contactor) with a Type K thermocouple, this will send information to the Arduino which will use a PID controller system to increase or decrease the current going to the Peltier system such that the temperature remains at a constant 45Degrees C, the system will allow the user to see if the temperature of the electrical component is within the allowed...
We have been trained the model for NLP document suggestion and ranking, image classification and video. We're going to deploy these models on local environment as hardware like Raspberry PI 3 or 4 and Yocto. We need help to deploy these models as mentioned on Hardware OS. Please little study Yocto platform before. Thanks
Develop and customize a Yocto-based embedded Linux system for the Raspberry Pi 3 single-board computer. Develop Linux support for HC-SR04 sensor . Develop a module test application
I need some help with my Yocto Project Everything compiles perfect , but my Openssl version is 3.0.5 and i need to change it to version 1.1.1q The folder /poky/meta/recipes-connectivity/openss has 1.1.1q but it pulls 3.0.5 from somewhere . Should be a easy task for someone thats clued up with Yocto.
We have product and yocto bsp's, we need to build or develope this yocto project
We have product and yocto bsp, we need to compile and release the OS
In order to use the IMX477 camera with BalenaOS (based on Yocto), we need a developer to write the necessary kernel patch and builds us a custom BalenaOS. You can find the necessary information in this forum: Thank you! :)
...linkedin ,google search to find the need to write those names, email address, city, country, website (if available)and telephone some information is not available you can keep it create an excel sheet. Product Types : Process Control Instrument Dealers Inductive Speed Sensors Tachometers Mineral Insulated RTD Skin Temperature RTD Bearing Temperature RTD MI Thermocouple Thermowell Transparent Level Gauges Reflex Level Gauges Tubular Level Gauges Flow Switches Safety Relay Electrical selector switch Push Buttons Signal Conditioners & Isolators Smart Powerline Transducers Conductivity Level Switch Hydrostatic Level Transmitter Capacitance Level Transmitter Magnetic Float Level Transmitter By-pass Level Transmitter Vibration Type Level Switch Rotary Paddle Level
We have a RK3328 device running Yocto with linux 4.4. It has ES8316 audio codec but it is not configured properly. We need someone to configure it and fix some minor bugs. ( HDMI resolution detection error, Wake on LAN etc. ). Feel free to contact me for more information.
...appreciated. • Knowledge of tools like GNUMake, CMake, etc. • Yocto Project • Basic knowledge of Linux kernel, device drivers would be good plus. • Collaborating with the rest of the engineering team to design and deploy the code to test/production environment. • Debug, validate, review and test new and existing code. • Experience with Linux Environment (Kernal Level Knowledge). • In-depth knowledge of relational databases (e.g. MySQL, PostgreSQL) and NoSQL databases (e.g. MongoDB). Knowledge of distributed systems is a plus. • Experience using system monitoring tools, automated testing frameworks and implementing server-side security. • Version Control using GitLab. Benefits: • Deep-Tech Learning :– Operating System Buildin...
I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.
I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.
Based on yocto RDK B raspberry pi board coding language c environment linux
The project requires an Embedded Programmer having experience in Driver Programming for FPGA cards, PCIe Interface and YOCTO as well as upbringing the Linux OS. Please DO NOT APPLY, if you DO NOT HAVE THE REQUIRED EXPERIENCE.
I need a PID temperature control for a lab oven ( resistance around clay) where the temperature increase and decrease with time at different speeds (1 to 20 hours ; up to 500 degrees celsius) . I need the ability to have multiple settings entered at the beginnin.... I need the ability to have multiple settings entered at the beginning run one by one without user interference (speed 30 degrees per hour (0,5 per minute) until hour 5, we reach 150 degrees then 50 degrees per hour until hour 7 , we reach 250 degrees, then stay stable at 250 for 3 hours and so on ( up to 5 settings) . I need arduino code + proteus simulation. I have keypad 4*4, max 6675 + thermocouple type k, display ssd1306 or 2 lcds or any of your prefernce, for other components you have the freedom of choice. Budget i...
IoT Project for Elevator Management System. Need a software developer a Python programmer to configure Single Board Computer (SBC). Configure the SBC as follows: 1. Configure the READ function to collect the Data on RS-485 port from a Daisy Chained I/O modules. Architecture diag. attached ( max. 8- I/O modules with 45 connection each, daisy chained and connected with SBC on RS-485 port) 2. Configure the Master - Slave and daisy chaining. 3. Configure the MODBUS registry. 4. Configure WRITE function to receive command from Cloud application and trigger the I/O board. 5. Push the data to third party cloud solution in JASON format. 6. Make sure the data is collected and pushed on the cloud software successfully. 7. Need assistance after deployment in case any ambiguity arises. 8. GUI for int...
Hello there, I need a PID temperature regulator that decrease and increase variable temperatures with variable times and degrees settings (exp 0,1 degrees every 1 minute) with various settings at a time without user interference up to 5 settings(exp 0,1 degrees every 1min up to hour 6 then another setting and so on).With the possibility to change ...that decrease and increase variable temperatures with variable times and degrees settings (exp 0,1 degrees every 1 minute) with various settings at a time without user interference up to 5 settings(exp 0,1 degrees every 1min up to hour 6 then another setting and so on).With the possibility to change PID variables other than the standard setting. Enter settings with 4*4 keypad, feedback with thermocouple. Will need Arduino code, Proteus s...
I want to make this product . Involves everything, one window solution. Input : RTD, Thermocouple - All, Output : 4-20 mA DC in 2 wire loop, PS : 15-30 V DC, Head Mount enclosure of dia 43 mm, All calibration/selection/range input settings by a communicator on board. Involves : Total design of the product. Hardware, PCB design, Software etc and everything. If you have this product readymade with you, please send a sample to us for testing.
...to work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: June/July 2022 Duration of projects: Between 6 to 12...
I want my own kernel and image for the Radxa Rock PI E Board compiled with the yocto framework. there is an existing support with instruction is on this site: there are some problems when compiling raxda used and old branch dunfell and there are compiling errors with 2 packages. you got access to my linux debian server, where the yocto enviroment is installed. goal: + ready image for my sd card + bitbake -k radxa-console-image + documentation what was the solution + hourly recording about your work skills: embedded software Yocto Buildroot Linux programming C/C++
I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.
Development of embedded near real time solutions on a Linux platform in a Yocto Project environment. Ability to emulate touch screen functionality from conceptual scetches, and actuate resultant hardware command instructions to analog hardware through I2C, USB, LVDS Display and SPI communications protocols will be required. Familiarity with TCP-IP over Ethernet interfacing as well as DICOM and HIS/RIS application protocols is a major plus. Project is currently centered on NXP i.Mx8m_Mini evaluation board. Familiarity with the programming of this board is a plus. Please provide a portfolio of work at this level for consideration. Projects that are actually being marketed and can be downloaded / evaluated today are preferred.
I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.
I need some one to build temperature control device with k type thermocouple and relay control.(need PID control). You can use any microcontroller. I need PCB design, Firmware in c. I am attaching some documents which will help you to know more about it. The attached document is the same product that i want to develop. with model no REX-C100FK06-M*AN output is relay type. temperature range - 0-1200k supply - 220v AC, 50HZ/60HZ.
Searching for Linux kernel developer, Network programmer, network device driver expert, yocto Linux expert.
Please do NOT bid if you do not have the following experience This project requires an Experienced Embedded Programmer. 1. Prior experience in writing Interrupt Service Routines in Linux is a must 2. Prior experience with YOCTO is a must 3. Prior experience with Xilinx xDMA is a must 4. Prior experience with PCIe Interface is needed. 5. Familiarity with RISC-V architecture is a plus.
I need to setup a development environment on my Ubuntu VM. I will build code for Raspberry Pi 400, with yocto embedded linux. Also, I will build the code locally so I'll need the SDK. And to enable remote debug I will use Netbeans or some other platform. Currently I am using Ubuntu VM and able to run and debug on Raspian OS. But now I want to shift to real embedded, where the application will be merged with the OS that will run as a real embedded system, using yocto. I am using all peripherals of Raspberry, and I am writing code in C.
Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '
...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 mont...
...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 month...
...documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided as a fully integrated Yocto package - this will be bundled with the lower-level firmware and drivers referred to in hardware specification in (A) above 3. All source code shall be extensively documented and provision for both production and debug version
Using Rasberry Pi to work with sensors to alert me Thermocouple sensors Pressure sensors or just a simple switch
I'm looking for someone to make a raspberry pi 4 yocto recipe for the driver found at this github.
(Only on Full Time Basis : 8 Hours per Day)---->Microprocessor based Board Development and Firmware is done and now application layer need to be developed for MPU requirements. Development will be using C language and Operating System is Yocto Linux. I have not provided MPU chip name as we are OK to train the person if he/she is aware of C programming and Yocto development platform. Since Hardware is available at Pune and Ahmedabad only, we need you to work from either Pune or Ahmedabad location.
Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '
The goals is implementation of a Raspberry Pi based control for temperature control of a heating element. In the first deliverable,raspberry py is communicating with Eurotherm Temperature controller, connected to Eurotherm TE10A thyristor to control the current going through NiChrome based resistance wire. Temperature measured by thermocouple.
