Esp32 ota arduino jobs
...codebase developed in the Arduino environment. The project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino ...
...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities...
Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...
I'm in the process of launching a new start-up, an Online Travel Agency (OTA) focused on hotel searches. I need a talented full-stack developer who can take charge of creating the front-end, back-end, and database for this project. Key Requirements: - The OTA needs to be compatible with both Desktop and Mobile platforms. - It must include essential features such as hotel search and filtering, user reviews and ratings, and seamless booking and payment integration. - A modern design style is a must. The website should have a clean, contemporary aesthetic that enhances user experience. Ideal Skills: - Proficiency in full-stack development with a focus on creating robust, user-friendly, and visually appealing websites. - Extensive experience in developing for both desktop ...
I'm looking for an experienced Arduino programmer and circuit designer to build a simple circuit that can send readings from two fuel optical sensors over the longest range radio available. Key Requirements: - located in Great Britain - Knowledge in Arduino programming and circuit design. - Experience with fuel optical sensors preferred. - Proficient in implementing long-range radio communication, ideally LoRa. - Ability to design a battery-powered circuit. The circuit should take readings from the two sensors, which output 5V when in air and a neutral 3 wire, and send these readings over the radio. The circuit will be powered by a battery.
I'm experiencing sporadic connectivity issues with my home automation project. The setup involves an Arduino Uno and an ESP8266 WiFi module. Key Issues: - The Arduino Uno seems to go offline without a clear reason. - Unsure how to bring it back online. Ideal Skills and Experience: - Proficient in working with Arduino boards, particularly the Arduino Uno. - Hands-on experience with the ESP8266 WiFi module. - Strong troubleshooting skills for connectivity issues, especially with COM port. - Background in home automation projects would be a plus.
I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.
I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.
I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.
...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...
I'm in need of a specialized Low Frequency (LF) radio frequency repeater. Its primary role will be enhancing signal strength for indoor settings. Ideal Skills and Experience: - Expertise in ra...NOT for public use. Key Requirements: - 125-134 MHz, set frequencys, but posebility to change "program" - small 2 device package(1 reciever and one transmitter) - Reciever with High range(10 meters so a good antenna design is needed) - transmitter only needs a range of 1 meter - LoRa comunication between the 2 - only need a Working demo. But Blue prints Are needed for production - Arduino is prefered I have documents and a list of tested parts for less resurch time. I'm looking for a professional who can deliver a high-quality, reliable device th...
...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:
...an experienced developer specializing in Arduino and Android applications, and I would be delighted to assist you in creating your moisture sensor app. Project Overview The app will: Hardware: The ESP8266 module will handle Wi-Fi connectivity, communicating with the app. Sensors can be simulated or real, depending on your requirements. App Features: A clean interface inspired by your provided pictures. Real-time updates for sensor values. Customizable moisture thresholds for user-defined control. Development Process: Initial setup and design of the user interface. Integration of the ESP8266 for seamless communication. Testing with both simulated and real sensors to ensure reliability. Why Choose Me? Extensive experience working with Arduino and ESP8266 modules. Pro...
I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technology, and LED displays.
...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...
I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...
...animations like blinking, rolling, and complex eye-like movements. This project will use an ESP32 microcontroller and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong backgr...
I am looking for a professional to help create unique, animated car headlights for my vehicle. The headlights should resemble expressive eyes and be able to perform various synchronized animations such as blinking, rolling, and complex eye-like movements. Key project requirements include: - Utilizing an ESP32 microcontroller and two GC9A01 TFT displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Expe...
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an S...
I am looking for a skilled Arduino developer to create an interactive, sensor-based educational model. Key Requirements: - Extensive experience with Arduino programming - Proven track record of creating interactive models - Ability to integrate various sensors into the model - Excellent communication skills to explain the project and its educational benefits The goal of this project is to create an engaging tool that can facilitate learning in a fun and interactive way. It should be robust, reliable, and easy to use. Experience in educational tool development is a plus.
I'm looking for a skilled iOS developer to create a minimalistic, user-friendly app for monitoring moisture levels via Arduino sensors. The app will connect with 1 to 8 sensors over Wi-Fi, displaying their readings on a grid layout. Key Features: - User can set a default moisture level - Visual feedback: table turns red when moisture exceeds the set level, stays green when below - Option to display readings from 1, 4, or all 8 sensors - Push notifications alerting the user to changes in moisture levels Ideal Skills and Experience: - Proven experience in iOS app development - Prior work with IoT (Internet of Things) applications is a plus - Strong understanding of minimalistic design principles - Experience implementing push notifications in apps - Knowledge of creating grid l...
I am looking for an experienced coder to convert my Arduino code to work with the Padauk PMS152. This is for a customized application aimed at enhancing my business operations. Key Responsibilities: - Retain and adapt the specific functionalities from the Arduino code: sensor data handling, communication protocols, and actuator control. - Ensure the converted code is optimized for a Padauk PMS152. The ideal candidate will have extensive experience with both Arduino and Padauk coding and a good understanding of developing custom applications for business purposes. Familiarity with sensor data handling and communication protocols is crucial. Please include in your proposal examples of similar projects you have completed.
I am in need of a detailed wiring diagram for my Arduino R3 project which controls a Stepper motor. The connections are already listed, but I would like a professional and clear diagram to wire from. Key Project Details: - The wiring diagram needs to be in PDF format. - It should be created using Fritzing software. - The diagram should include detailed labels for all connections. Ideal Skills and Experience: - Proficiency in using Fritzing software. - Prior experience in creating wiring diagrams for Arduino projects. - Attention to detail to ensure all connections are accurately represented and labelled.
I'm seeking a skilled Arduino coder to help me write a program for a radio sweep unit using a TEA5767 and an Arduino Uno. The unit should include: - A button to start and stop the sweep - A button to switch between forwards and reverse sweeps - A button for a random sweep - A potentiometer to adjust the sweep speed - An I2C IIC LCD 1602 Module to display the current frequency, sweep rate, and sweep direction, all on separate lines - A signal strength indicator The code must utilize pull-up resistors for the buttons. The ideal candidate should have extensive experience with Arduino programming, specifically with the LiquidCrystal_I2C.h library for the I2C display module. The display should be set to show separate lines for each piece of information. Please includ...
I'm seeking a professional consultation on the ESP32-S3 SIM7670G 4G Development Board. The primary application for this project is remote monitoring of security and surveillance data via analog cameras. Key Responsibilities: - Provide expert guidance on the optimal use of the ESP32-S3 SIM7670G 4G Development Board for remote security monitoring. - Assist in the integration of analog cameras with the board for effective surveillance. - Recommend best practices for data collection and transmission. Ideal Skills: - Extensive experience with the ESP32-S3 SIM7670G 4G Development Board. - Proficiency in IoT and remote monitoring systems. - Strong understanding of security and surveillance systems, particularly with analog cameras. - Excellent communication skills for...
I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, searching for a BLE beacon and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing to...
...double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The ESP32, SIM800L, and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1″ (2.54 mm) spacing through holes. 6 X 14 CM PCB Board - Power PCB 14 x 14 CM PCB Board ESP32 38Pin Development Board --> Hi Link HLK-PM01 5V/10W --> 2.54mm Pin Female Single Row Header Strip -->
I'm looking for a skilled Arduino developer to create an interactive maze game using basic sensors and LEDs, with button presses as the main form of interaction. The game should challenge players to navigate a maze without touching the boundaries. Key project components: - Utilization of basic sensors and LEDs - Interactions primarily through button presses - Game objective centered around navigating a maze Quisiera que me programara el codigo en Arduino UNO. Basicamente una vez empezado el juego , el jugador tiene un tiempo determinado para completar el laberinto si tocar el cable, si lo consigue se da un codigo a traves de mensaje. dejo un enlace a un video de yotutube que es exactamente lo que quiero hacer:
I'm looking for a skilled developer to create a straightforward VST utility plugin. The primary function of this plugin is to output audio from a mixer track over USB to an ESP32. Key Requirements: - The VST utility tool needs to be compatible with both Windows and macOS platforms. - Understanding and experience with ESP32 integration will be a significant advantage. - Knowledge in developing VST plugins and audio processing will be highly beneficial. Please ensure to include examples of your previous work with VST plugins in your proposal.
I'm looking to hire someone to work on a little experimentation project. The project includes programming with Arduino and synth sequencers. The primary function of this system will be to control the speeds of a stepper motor from a control voltage synth sequencer through Arduino. The project requires: - The ability to design and implement a system with arduino that can control a step-motor and use components such as quadrature encoders and switches. - The capability to create a system that allows for CV control from a synth sequencer. Thanks for your attention and looking forward to hear from one of you. Best greetings to you all
I need an expert in data security, privacy, and blockchain to work on a project involving secure proximity activations using smart devices. Overview: - The system should be activated by a SmartPhone entering a location. - The system should open gates, turn on lig...(BLE) Secure Connection for security. Skills and Experience Required: - Extensive knowledge in data security and privacy. - Proficient in integrating with smart devices. - Experience working with Bluetooth Low Energy (BLE) Secure Connection. - Familiarity with using MPU (Raspberry) devices and Docker Container-based System. - A new advertisement system should be adopted. (Or alternatively - MCU (ESP32) devices are considered leveraging Jaguar Container-based Systems - Secure Proximity Activations MCU-based in TOIT langu...
...of a comprehensive Arduino library for the AMC131M03 ADC that is compatible with the SAMD core (like the Arduino Zero). This library should support all possible features of the ADC, including reading values, calibrating readings, and robust error handling and reporting. Key Requirements: - Full compatibility with the SAMD core - Support for 24-bit ADC resolution - Extensive functionalities: Reading ADC values, Calibrating ADC readings, Error handling and reporting, etc.. Ideal Skills and Experience: - Proficiency in Arduino library development - Strong understanding of the SAMD core - Experience with 24-bit ADCs - Excellent debugging and error handling skills - Previous work with AMC131M03 ADCs is highly desirable Many libraries already existt on Github, ADS131M0...
I'm working on a project involving a vehicle speed detection system. This system should be integrated with an Arduino microcontroller and use induction loop technology. The target vehicles will be toy-sized cars. The main tasks for this project include: - Detecting and calculating the speed of the toy cars passing over the induction loop. - Outputting the speed data and triggering a single LED to flash when a predefined speed threshold is exceeded. - The speed threshold will be a fixed value defined in the code. The ideal freelancer for this project should have a strong background in electronics, specifically with Arduino and induction loop technology. Experience with speed detection systems will be a plus. I am looking for someone who can deliver a reliable and accura...
I'm looking for an expert in electronics who can design a RGB LED circuit board for a custom electronics project. Key Requirements: - The circuit board will control a 12x12 inch matrix of dot LEDs - The control will be via a microcontroller, specifically an Arduino or Raspberry Pi or Teensy 4.1 Ideal Skills: - Expertise in circuit design and microcontroller programming - Experience with RGB LED projects - Ability to create a 12x12 inch matrix of dot LEDs
I'm looking for an expert in Arduino software development with a focus on robotics control. The project involves developing software that allows an Arduino to interact with DHT11 temperature sensors. Key requirements: - Extensive experience with Arduino programming - Understanding of robotics control - Proficiency in interfacing with temperature sensors, specifically DHT11 - Ability to develop efficient, reliable software for robotic control Your task will be to create a system that can effectively utilize the DHT11 sensors for temperature monitoring and control within a robotic framework. Please provide examples of similar projects you've completed in your bid.
My existing Android application is very old and targets SDK version 19 or so. I require it to be migrated to AndroidX and to be compatible with Android 14. The app is basically a little webserver and webpage, and communicates with an Arduino via the AOA protocol. Key Requirements: - Convert the app to run on Android 14. Ideal Skills: - Experience in Android app development and upgrades.
I have an Arduino project that has unexpectedly stopped functioning. The program simply quit working without any error messages. It's using a mega board with a PWM board to drive 9 servos. - Ideal Skills: Knowledge and experience with Arduino programming and debugging are essential. - Previous Experience: A portfolio showcasing prior work with Arduino projects will be beneficial. - Additional Skills: Problem-solving skills and patience are highly appreciated. I need a professional who can help troubleshoot and get my project back on track.
I need a skilled developer to enhance my React Native ESP32 IoT app with several important additions and improvements. Key Requirements: 1. Add a widget to the app that displays the next prayer time. 2. Enhance the overall performance of the app. 3. Fix minor bugs, particularly with audio playback and the countdown timer. 4. Implement BLE - esp-idf-provisioning for connecting the app with the device to play audio at scheduled times. 5. Prepare the code for a successful launch on Android and iOS app stores. The highest priority for this project is the BLE - esp-idf-provisioning implementation. Experience with React Native, IoT applications, and BLE connectivity is crucial. A strong understanding of performance enhancement techniques in mobile applications will also be beneficial. ...
I'm looking for an experienced Arduino programmer who can write code for a hydropower turbine. The main function of the code will be to control the turbine speed. Key Requirements: - The Arduino should automatically adjust the turbine speed based on the water flow rate. - Although I currently have no measurements for the water flow rate, the code should be flexible enough to incorporate a flow meter in the future. Ideal Skills and Experience: - Proficiency in Arduino programming is a must. - Prior experience with hydropower turbines will be highly regarded. - Ability to write adaptable code for future sensor integration is essential. - Knowledge of controlling speed based on variable conditions.
I'm seeking an expert in ESP32 microcontroller and MQTT Mosquitto Broker who can help me with a project aimed at remotely controlling appliances over Wi-Fi. Key Requirements: - Design and implement an ESP32 based system for remote control of appliances. - Integrate MQTT Mosquitto Broker for communication management. - Ensure Wi-Fi is utilized as the main communication method. Ideal Skills and Experience: - Proficient in programming and working with ESP32. - Strong understanding and experience with MQTT Mosquitto Broker. - Prior experience with home automation projects would be a plus.
I need to create a library that allows the ESP32-S3 to connect to a computer as an MSC device to access the FAT partition. I found an interesting example on GitHub () that is close to what I need, but the library has some issues: it often fails to mount correctly. I am looking for someone who can fix the problem or create a new library that works as expected.
I'm working on a robotics project and need assistance with programming an ESP32 to control stepper and servo motors for robot arms. Key Requirements: - Extensive experience with ESP32 programming - Proficient in controlling stepper motors and servo motors - Understanding of robotics and robot arm mechanics - Ability to write efficient and effective control code The goal is to have a seamless control system for the robot arms using the ESP32. Your previous experience in similar projects will be a significant advantage.
The pcb will be done using easy eda.. Garber, BOM and CPL needed to be deliver
I'm seeking a skilled programmer to write an Arduino code for a BQ25887 USB charging IC. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () Key Requirements: - Charging condition: Need to charge two separate single cell battery of 2000mah via USB charging of around 5V 3A. - For each individual cell, the max charging voltage should be 4.2V and the maximum charging current for each battery should be 1A. - The code should allow for automatic initiation of the charging process. - Enable cell balancing to maintain cell voltage equality. - Implement fault recovery (e.g., reduce current, stop charging). - Adjust charge
I have an ESP32-CAM project that needs to recognize a few custom objects and execute a pre-written Arduino program based on the recognition. The program is already ready, and I simply need the ESP32-CAM to identify the objects and trigger the next action. The specifics of the project include: - Recognizing 1-5 custom objects with the ESP32-CAM - Using a manually collected image dataset to train the recognition system Ideal candidates for this project should have: - Experience with ESP32-CAM and Arduino - Skills in object recognition and machine learning - Ability to work with custom datasets - Proficiency in programming and hardware interfacing
...experienced hardware and firmware developer to create a WiFi-enabled pen drive using an ESP32 module and an SD card module. This device should function as a traditional USB pen drive while also enabling wireless data transfer and management. Key Requirements: - The primary use case for this device is business file sharing. This means it should be able to handle large files, work reliably, and be user-friendly. - For the wireless management and data transfer, I'm specifically interested in the FTP protocol. - In terms of security, the device should include password protection to ensure secure file sharing. Ideal Skills and Experience: - Extensive experience in hardware and firmware development. - Prior work with ESP32 modules and SD card modules. - Familiarity with c...
I'm seeking a seasoned hardware and firmware developer to engineer an offline, WiFi-compatible USB pen drive via an ESP32 module paired with an SD card module. This device should operate as a conventional USB pen drive, whilst also facilitating wireless data transfer and management. Key Requirements: - The primary function of this device is to support wireless data transfer, specifically enabling file sharing between multiple devices. - Compatibility is crucial. The pen drive must support seamless wireless file sharing across Windows, macOS, and Linux operating systems. Ideal Skills: - Extensive experience in hardware and firmware development. - Proficiency with ESP32 and SD card modules. - Strong understanding of USB drive functionality and wireless data transfer mech...
