Simulink ofdm transmitter jobs
Synchronous Generator Modelling and Simulink Implementation
...implementation of a Model Predictive Control (MPC) framework for an energy system comprising batteries, a fuel cell, an electrolyzer, and a hydrogen tank. The goal is to maximize profits by optimizing energy flows while meeting operational constraints and responding to external disturbances such as grid pricing and renewable energy variability. The project will be developed and simulated using MATLAB/Simulink. 1. System Overview The energy system under consideration consists of: • Grid Connection: Allows for buying and selling energy. • Battery Storage: Acts as a short-term energy buffer. • Fuel Cell: Converts hydrogen into electricity during demand peaks (Smooth behavior) • Electrolyzer: Produces hydrogen using excess electricity. • Hydrogen Tank: Sto...
I'm looking for a freelancer to help with a project that involves working with electric motors and simulations. Here's what needs to be done: Motor Control: Find a way to avoid high current in low-speed motors, especially when adjusting voltage. You’ll need to explain the challenges with this and back it up with research. Simulation: Use MATLAB/Simulink to create a simulation showing how the motor performs at different speeds (15, 30, 50, 65, 80 Hz). Then, explain the results. Equipment Selection: Choose the right equipment and methods to get the motor's performance at different speeds (15, 30, 50 Hz), using two types of control (V/f and V/f2). Discuss the results and any issues with the methods. Torque and Power Curves: Based on the motor data, create chart...
I'm looking for an experienced engineer to design a 27Mhz transmitter and receiver system for me. This system needs to work effectively in an urban environment and achieve long-range transmissions of up to 5-10km at a speed of 100bps. Key specifications: - The sleep current must not exceed 100uA to ensure power efficiency. - The data will be transmitted in binary format and needs to be sent & received through an Arduino microcontroller. - transmitter Power should be less than 1 watt. Ideal skills and experience for the job include: - Proficiency in radio frequency engineering. - Extensive experience with Arduino and microcontroller programming. - Knowledge of binary data encoding and transmission. - Ability to design systems for urban environments with potential i...
I am working on a Simulink project focused on communication systems, specifically MIMO channel modeling. The project involves understanding communication channels and implementing various transmission and reception techniques. Key Aspects of the Project: - MIMO (Multiple Input Multiple Output): This is the primary focus of the project. Understanding and implementing MIMO techniques is crucial. - Channel Modeling: The project requires in-depth modeling of MIMO channels. - Communication Systems: A solid understanding of communication systems is necessary to effectively work on this project. Ideal Skills: - Extensive experience with Simulink - Proficiency in MIMO techniques - Strong background in communication systems - Experience with channel modeling This project will not ...
I am looking for a professional who can assist me with real-time optimization strategies in motor drives control. Specifically, I need help in MTPA Strategy using Model Predictive Control for optimizing the performance of permanent magnet synchronous motor (PMSM) drives using MATLAB Simulink. Key Requirements : 1)Results required Of three Phase currents with and without MTPA, With considering Iron Losses and Without considering Iron Losses. 2) Results Required of Electromagnetic Torque with and without MTPA, With considering Iron Losses MTPA and Without considering Iron Losses MTPA. 3) Motor Speed results perfectly tracking the Reference speed 4) D-Axis and Q-axis Results Required with and without MTPA, With considering Iron Losses MTPA and Without considering Iron Losses MTPA. ...
I'm in need of a seasoned 3D Mechanical and Electrical expert who is proficient in SolidWorks and MATLAB/Simulink. The project involves drawing and designing, as well as simulating and troubleshooting a dual system. The ideal candidate will also be responsible for revising and refining the design for final approval. Key Responsibilities: - Drawing and designing both mechanical and electrical systems - Simulating and troubleshooting during the design process - Revising and refining designs based on feedback Skills and Experience Required: - Extensive experience with both mechanical and electrical systems - Proficiency in SolidWorks and MATLAB/Simulink - Strong troubleshooting skills - Excellent revision and refinement capabilities As this project is located in Malaysia...
I'm embarking on an exciting journey to establi...embarking on an exciting journey to establish a new Christian radio station and I'm in need of a professional broadcast engineer to help bring this vision to life. This project involves setting up the transmitter, installing audio equipment, and configuring the antenna and signal. Key Responsibilities: - Assisting with the transmitter setup - Installing audio equipment - Configuring the antenna and signal Ideal candidates should have: - Extensive experience in radio broadcast engineering - Proven track record in setting up new radio stations - Strong understanding of audio equipment and transmitter setup - Ability to ensure high quality signal and sound Your expertise can help spread a positive message to ...
...independent dual pressure control manifolds: Low pressure dual PCM: reduces the pressure supplied from the mid-pressure storage tubes to low pressure at a specified SCFH High pressure dual PCM: reduces the pressure supplied from the High-pressure storage tube slightly at specified SCFH These pressure control manifolds are fully manual. Downstream of each manifold will be a pressure transmitter to see the pressure supplied to the user at all times. The system will also feature a compressor designed to take top gas from the bulk tank and compress it into the mid-pressure storage tubes. The compressor will operate independently of the liquid pumps, and will cycle on and off based on bulk tank pressure and ASME tube pressure. Gas from the ASME tubes will supply the user...
...terrains and under different environmental conditions. Conduct performance analysis, including power consumption, range, and energy recovery during braking. Work with the design team to refine the vehicle’s performance based on simulation feedback. Provide detailed reports with insights and suggestions for design improvements. Skills Required: Proficiency in EV simulation software (e.g., MATLAB/Simulink, CarSim, Simpack). Strong understanding of electric vehicle powertrains, battery systems, and vehicle dynamics. Experience with 3D modeling and simulation tools (e.g., SolidWorks, Autodesk). Ability to analyze and optimize efficiency and sustainability in EV designs. Strong communication and collaboration skills. Additional Information: This is a contract position, with po...
I'm seeking an expert in both PSCAD and MATLAB (SIMULINK) to convert an entire Power Electronics project from PSCAD to MATLAB (SIMULINK). The primary aim of this conversion is to enhance simulation accuracy. Key Requirements: - Complete conversion of project to MATLAB - Ensuring high fidelity in simulation accuracy compared to PSCAD - Equivalently recreating custom components in MATLAB from PSCAD Ideal Skills: - Proficiency in PSCAD and MATLAB (SIMULINK) - Strong understanding of Power Electronics - Experience in creating and using custom models in both platforms This project requires careful attention to detail to ensure the converted project retains the same level of performance and precision as the original. Please only bid if you have the necessary experien...
I need a MATLAB program that receiving the constant numbers Lr, Ls, Rs, Lm, sigma related to a given motor and the desired range of rotor resistance Rr, selects the best K and indicates the changes in the range Rr and K on the graph and the convergence is clear in it. K is the system feedback, which is predicted in a robust control. Simulink can also be used. The Hanso MATHLAB program, which is in the attachment, can be used for help. Full program description and diagrams are required. Key tasks: - Develop a MATLAB program to solve various equations of state - Implement vector control for motor drives Ideal skills and experience: - Proficient in MATLAB programming - Strong background in Electrical Control Systems - Experience with motor drives and vector control systems - Knowled...
I need design & simulations for a 2wire & 3wire current loop transmitter using XTR115 . the sensor input is 0 - 24V ouput should be 4-20mA Key Requirements: Simulations : - I need circuit & simulation of the design in Altium or LTspice I am looking for someone who can complete this project ASAP, given the urgency. Please only apply if you have relevant experience and can deliver high-quality work quickly.
I need a project focusing on the charge/discharge cycles of electrochemical batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Ability to perform complex calculations Experience: - Prior experience with modeling or simulating battery systems - Familiarity with academic or engineering projects focused on battery performance
I'm conducting academic research that involves a Simulink simulation of a parallel LC resonant converter for Induction Heating. The circuit and values for the capacitor and inductor in the resonant tank are provided. The project requires the MOSFETs to be working in pairs as it is a full bridge. Key Requirements: - Measurement blocks for the current on the inductor and the voltage passing through the capacitor - Selection of appropriate values for the MOSFETs, pulse generators and the voltage source - Demonstration of the effect of before and after using the ZVS/ZCS on the MOSFETs through graphs - Proper value selection for the matching inductors - Conducting open-circuit and closed-circuit tests by adding a resistor and displaying the power rating on it - Explanation or show ...
I'm in need of a seasoned MATLAB and Simulink specialist who can assist me with a project involving the design and development of a 20kV and 50kHz system for generating RF Cold Plasma. Key Responsibilities: - Create a comprehensive simulation of the system in Simulink - Ensure the simulation accurately reflects the intended circuit design Ideal Skills and Experience: - Proficient in MATLAB and Simulink - Prior experience with RF Plasma simulation preferred - Strong circuit design understanding - Excellent analytical skills for interpreting simulation results
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd
...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...
...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechan...
I need a model in MATLAB that helps optimize processing parameters by simulating the behaviour of a heat transfer and processing plant system. Specifically, I want to focus on: - Temperature distribution: Understanding how heat is transferred and maintained throughout the system will be crucial for optimizing processing parameters. - System efficiency: We need to be a...efficiency: We need to be able to assess how changes in processing parameters affect the overall efficiency of the system. This also includes system starting sequence and time to obtain optimal working parameters (equilibrium state). Ideal freelancer for this project should be proficient in MATLAB and have strong experience in modelling and optimization in thermal and processing systems. Ideally Simulink -fluid p...
To help in developing a custom Battery Management System (BMS) for electric vehicles, adhering to IEEE P2686 standards. The project involves advanced modeling, simulation, and report preparation, requiring a deep understanding of battery systems, MATLAB/Simulink, and automotive standards.
I'm looking for a freelancer who can assist me with the simulation of a robotic arm (a simplified 3D model has already been imported) in MATLAB Simscape Multibody. The project involves customizing existing polynomial trajectory blocks to test joint motion. Each of the arm's 13 joints will be equipped with a DC motor control circuit, following a provided schematic. The shoulder, elbow, and wrist joints can move up and down, while the fingers are limited to gripping motions. Start your proposal with AOA and plz keep it short. Key Responsibilities: - Customize existing polynomial trajectory blocks to adjust joint angle limits. - Setup for testing joint angles (q) without considering velocity (qd) or acceleration (qdd). Ideal Skills and Experience: - Proficiency in MATLAB Simscape ...
I'm currently working on a flight dynamics project analyzing the longitudinal dynamic stability of a conceptual aircraft design. I've run into some issues with my Simulink model, specifically with parameter configuration and Simulink inputs. I need assistance troubleshooting these issues and completing the task. - Must be available on chat for approximately 4 hours. - Ideal candidate will have access to R2024a Matlab, a thorough understanding of flight dynamics and aerodynamics, as well as professional Simulink skills. -Trimming on simulink. Please only bid if you're satisfied with the time, price, task, and availability.
I'm in need of a skilled professional to assist me with a Simulink model that won't run. The task involves conducting a longitudinal dynamic stability analysis of a conceptual aircraft design over approximately four hours. I'll be available for the entirety of this task and will require your assistance in navigating through Simulink, identifying the issue with the input parameters, which represent M and thrust (T), and finding a solution. Requirements for this project include: - Access to R2024a version of Matlab - Thorough understanding of flight dynamics, aerodynamics, and 1st and 2nd order differential equations - Professional experience with Simulink *Please only bid if you are satisfied with the time, price, task and availability.*
...Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview solely focused...
I'm in need of an expert who can create a moderate detail CAD model of a mechanical component, import it into Matlab, and then conduct a simulation using Simulink/Simscape. The goal is to complete this task within a week. Ideal Skills and Experience: - Proficient in CAD software - Experienced in Matlab, Simulink, and Simscape - Able to deliver within tight deadlines - Good understanding of moderate detailing in CAD models Please note, the specific features of Simulink/Simscape to be used for the simulation have not been determined yet. However, a general understanding of these tools and their capabilities will be beneficial.
I'm looking for an expert in MATLAB Simulink who can assist in simulating an Electronic Differential System (EDS) for a quad in-wheel electric vehicle. The project involves: - Setting up the software environment - Implementing the torque vectoring control logic - Visualizing the results - Writing a report The simulation should encompass both the motor models and vehicle dynamics, with a focus on torque vectoring. Skills in vehicle dynamics modeling, control systems design and MATLAB Simulink are essential. Experience in simulating EDS or similar systems would be a significant advantage. Please provide a portfolio of relevant work, especially any related to in-wheel electric vehicles.
I AM SEEKING FOR PROFESSIONAL ELECTRICL ENGINEER .WORK DONE THROUGH MATLAB AND SIMULINK PLEASE BID IF YOU ARE EXPERT
I'm looking for an expert in PLC and HMI development for controlling a blower using an Allen-Bradley CompactLogix PLC and a PanelView Plus HMI. Requirements: - Design and implement PLC control logic for blower VFD control. - Develop HMI interface for user control, monitoring & trending - Ensure robust system for reliable blower control - Incorporate analog transmitter signals in control scheme Ideal Skills: - Proficiency in Allen-Bradley CompactLogix programming - Experience with PanelView Plus HMI - Knowledge in blower control systems
...achieve the desired output. Van de Graaff Basics: Traditional Van de Graaff generators operate by transferring static charge to a conductive dome. The static nature of the charge means there isn’t a well-defined "frequency" in the MHz range. Generating 800 MHz Output: The 800 MHz frequency is in the radiofrequency (RF) spectrum, which would typically be generated using an RF oscillator or transmitter, not a Van de Graaff generator. To integrate this frequency output, the system would need a Van de Graaff generator to work in tandem with RF-generating electronics. Proposed Design Plan --------------------------------------- * Important(Keep in mind we would prefer you go with your own design plan because the most important part of the project is for the outpu...
...Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview solely focused...
...Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotive industry standards and regulations. - Knowledge of other specific regulations in the automotive industry. - Ability to conduct an interview solely focused...
...duty cycle of the PWM signal. Key tasks include: - Modeling the DC Motor System in Simulink, including electrical and mechanical components such as armature resistance, inductance, back EMF, and rotational inertia. - Generating the PWM signal using a 555 Timer IC or equivalent, to control the motor speed. - Implementing a PID controller to adjust the PWM duty cycle based on feedback from the motor speed. - Simulating and testing the motor’s performance, ensuring the system achieves the desired speed with minimal overshoot, steady-state error, and fast response time. - Documenting the process, including the design, simulation results, and performance evaluation. The deliverable will be a fully functional Simulink model of the motor system with a working controller, pe...
...Experience:** - Strong portfolio demonstrating projects in **power electronics**. - Proficiency in embedded C/C++ programming. - Hands-on experience with microcontrollers and embedded systems. - Knowledge of battery management systems and protection mechanisms. - Expertise in hardware interfacing and debugging. **Preferred Skills:** - Familiarity with simulation tools (e.g., MATLAB/Simulink). - Experience with communication protocols (I2C, SPI, UART,STM32). - Background in display module interfacing for indicators. **Why Work With Us?** - Opportunity to showcase your expertise on a critical, innovative project. - Competitive compensation and flexible work terms. - Potential for long-term collaboration if we are impressed with the project outcome. Ho...
I've previously designed the transmitter and receiver of this project. now I'm going to design it's transmitter PCB and send it to the client
...involves designing a transmitter and receiver system that can transmit an analog signal of 0-12v from a potentiometer over a minimum distance of 600ft. Key Requirements: - Use of RF (Radio Frequency) technology for the transmitter and receiver - System designed for outdoor use - Optional: weatherproofing for the transmitter and receiver - Initial testing to confirm reliable operation at 600ft Ideal Skills: - Proficiency in RF technology - Experience with outdoor equipment - Ability to design optional weatherproof systems The ultimate goal of this project is to create a wireless remote for welding which can be controlled via a potentiometer. Please provide details of your relevant experience when bidding. also will have a blue tooth speaker built into the remote ...
Update Simulink code to output 50 to 60hz on my inverter circuit
I'm looking for an experienced Simulink designer who can create a control system for me. The specific type of control system I need is a Fuzzy PID controller. Ideal skills and experiences for this project include: - Proficiency in MATLAB Simulink - Experience with designing control systems, specifically Fuzzy PID controllers - Strong understanding of control theory and systems - Ability to provide clear and concise documentation of the design process.
...follow the technical specification, implemented in Simulink. Key design considerations include using J-K flip-flops, defining states and transitions, and using a Moore machine approach for stability. The solution requires a state diagram to identify the required states and flip-flops. Testing must ensure proper functionality under varying speed and input conditions, adhering to a structured test strategy. The report documenting this design must be professional, written for an engineering audience, and within a 10-page limit, including all figures, equations, and tables. It should include an introduction, design description, testing and simulation results, and a conclusion. Submissions must include both the report and a zip file of the Simulink project for testing. empha...
I'm seeking a professional with expertise in MATLAB and Simulink to help me design a trapezoid signal generator using a JK flip-flop. This project is primarily for research and development purposes. Key Requirements: - Design a trapezoid signal generator using a JK flip-flop in MATLAB Simulink - Ensure the model is reliable for research and development use - Provide detailed documentation including model design, parameters, and testing procedures. Ideal Skills: - Extensive experience with MATLAB and Simulink - Strong understanding of signal generation and flip-flop circuits - Research-focused mindset
I'm in need of an intermediate Matlab Simulink expert to assist with a photovoltaic (PV) project simulation. The primary focus is on modeling an off-grid PV system. Key Tasks: - Create an off-grid model incorporating various renewable energy sources, primarily solar panels. - Model potential faults specifically in the solar panels. - Diagnose faults as they occur during the simulation. - Simulate degradation over time in inverters. - Simulate the impact of different weather conditions on PV system efficiency. Ideal Skills: - Proficiency in Matlab Simulink is a must. - Previous experience with photovoltaic system simulations is highly desirable. - Strong ability to model and diagnose faults. - Knowledge and experience with inverter degradation over time. This project ...
...initial angle o. Experimentally estimate the distance lG between the center of mass G and the center of rotation O (see Figure 1). Design an Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. Build your designed Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. (will be graded in the class) Use the Simulink support package for Arduino to log the data to a computer using Arduino UNO. (will be graded in the class) 7) Experimentally measure the response when releasing the pendulum from rest with a given initial angle o. 8) 9) Use the collected data to estimate the dynamic parameters of the system. Use the estimated parameters to simulate the system parameters. 10) Plot the simulated re...
...initial angle o. Experimentally estimate the distance lG between the center of mass G and the center of rotation O (see Figure 1). Design an Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. Build your designed Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. (will be graded in the class) Use the Simulink support package for Arduino to log the data to a computer using Arduino UNO. (will be graded in the class)7) Experimentally measure the response when releasing the pendulum from rest with a given initial angle o. 8) 9) Use the collected data to estimate the dynamic parameters of the system. Use the estimated parameters to simulate the system parameters. 10) Plot the simulated res...
...seeking a professional who can design an electric actuator motor control system to prevent damages due to flooding, specifically by controlling a channel penstock in a river bed. The control system contains the following parts: A) AUMA multi-turn actuator SA10.2 Type: F10-B3-3Ph-400V-50Hz-32U/min-6-8-IP68-KS (See datasheet and description in project's attachment) B) JUMO NESOS R20 LT, Level transmitter via float (See datasheet and description in project's attachment) Key Requirements: - Design of an electric actuator motor control system - Send detailed BOM of parts which we need to buy - Send detailed instructions on how to install the parts and the system in general - Integration of a remote control functionality (Via smart life or any other internet-based method....
As per requirements, a Matlab/simulink model for dual axis solar tracking
