Esp32 rmt example jobs

thank you for being here; Here is code Would appreciate if this could be done within 2 hours, and ideally we can keep the hourly budget to a maximum of $10. I'm hoping this can be a quick task, so that we can establish a good working relationship and potentially collaborate in the future. terraform apply runs If aws vars are ready “use them” and "run code" and "proceed" if not then check If vault vars are ready “use them” ” and "run code" and "proceed" If neither vault or aws vars exist then exit Would appreciate if this could be done within 2 hours, and ideally we can keep the hourly budget to a maximum of $10. I'm hoping this can be a quick task, so that we can establish a good working relationship...

I'm engaging in an IoT experimentation with my LILYGO T3S3 ESP32-S3 LoRa SX1276 and require expert assistance to connect it to The Things Network (TTN). The primary purpose of this connection is to relay device status updates, specifically connectivity status. Ideal Skills and Experience: - Previous experience with ESP32-S3 and LILYGO boards. - Proficient in LoRa technology. - Familiarity with The Things Network (TTN). - Strong understanding of IoT systems and experimentation. - Ability to troubleshoot connectivity issues. - Proven track record of integrating various devices with The Things Network (TTN). - Deep knowledge of LoRaWAN protocols and packet handling. The device should use the EU868 frequency band. The connectivity status updates should support real-time m...

I'm looking for an experienced programmer to develop a project using an ESP32 and an OLPD touchscreen. The main functionality is to create an interactive low-frequency (0-20 kHz) sine wave signal generator. Ideal Skills and Experience: - Extensive experience with ESP32 programming - Proficiency in touchscreen interface development - Knowledge of signal generation - Familiarity with creating user-interactive devices - Experience with low-frequency waveform generation Key Requirements: - The ESP32 needs to control a sine wave frequency signal generator - The device will utilize an interactive touchscreen - The signal generator should support low-frequency (0-20 kHz) Please provide examples of similar projects you've completed in your bid. Thank you.

I am looking for an experienced Embedded Systems Developer to assist with upgrading the firmware/software of an existing system, which is based on the ESP32. Key Responsibilities: - Enhance the current firmware/software to support new features - Identify and rectify existing bugs Ideal Skills and Experience: - Proficient in ESP32 programming and firmware development - Experience with power board design - Strong problem-solving skills for bug fixes - Capability to implement new features effectively

I am an Arduino programmer with four years of experience in home automation. I'm looking to expand my skills from wired projects to wireless ones, specifically using WiFi. The projects will primarily involve working with various sensors, pushbuttons, and relays. I'm seeking someone patient, who commun...with various sensors and output devices - Excellent communication skills - Teaching experience is a plus I look forward to meeting someone interested in this collaboration. After six months, we may consider migrating to Raspberry Pi. I prefer a hands-on teaching style with plenty of practical exercises. Mentoring sessions will be scheduled during evenings and weekends. We will primarily use the ESP32 module for WiFi-based projects. Mentoring sessions will be conducted onl...

I need an experienced programmer who can help me with the ESP32 Arduino project. This project involves working with various components, with a primary focus on the SD Card and database. Key project components include: - Utilizing the SD Card for data storage - Implementing database operations with thousands of files - Performing data filtering and sorting The majority of the data will be in CSV format, so familiarity with handling and processing CSV files is a plus. Ideal candidates should be proficient in Arduino programming and have experience with: - ESP32 - SD Card and database operations - Data filtering and sorting - Skills in managing memory effectively to optimize ESP32 resource usage. If you have a strong background in these areas and can deliver on this p...

Hello. We are running a solar inverter automation service, based on a ESP32 module connected via Modbus. From this we take control of the Solarinverter, and excecute different automations based on time and price. Sadly our good developer has quit and we are looking for new to take on this task. We are at the mentioned step, and next is to build a Online dashboard, meaning our esp fleet should be able to connect to a cloud solution, where costumers an acces remotely(atm they can only access via local) automations can be build, and project can be developed. Ive attached the main scope of work for this project and will share further when we agree.

I need one Page in Wordpress to be created from an example ! Urgent work only under 12 Hours , please dont bid when you can make it in this time ! Requirements: Rearranging content based on the provided template Adjusting font sizes and colors according to specific instructions Familiarity with web design platforms Elementor Effective communication and adherence to deadlines If you are interested and have the necessary skills, please send me a message with your portfolio and an estimate of the time required for completion. I look forward to your proposals! Price and Time !

I will suggest the hardware and coding approach of the project.

I'm looking for a skilled PCB designer to update a PCB for a consumer electronics device. it uses an ESP32 module Key Responsibilities: - Update a PCB suitable for a control interface in consumer electronics. - Prototype -Assist with future Designs Ideal Skills and Experience: - Extensive experience in PCB design, particularly for consumer electronics. - Proficiency in working with Microcontrollers and Communication Modules. - Strong understanding of designing PCBs for control interfaces. - Ability to deliver user-friendly and efficient designs.

...ready. This project involves integrating an Arduino Nano ESP32 with a DY-SV5W MP3 audio module to play a specific audio file stored on an onboard SD card when an analog audio signal is detected. The audio currently plays, but I am having trouble getting the Arduino to control the start and stop of the DY-SV5W Audio. Assistance is required to trouble shoot or validate both wiring and Arduino IDE coding to ensure proper functionality. Project Overview: Hardware: Arduino Nano ESP32: Central controller for the project. Pinout and datasheet are provided. DY-SV5W Audio Module: Plays preloaded MP3 files from its onboard SD card. Datasheet provided. Signal Source: Analog audio signal to trigger the Arduino. Workflow: The Arduino Nano ESP32 monitors for an analog audio ...

I'm looking for an experienced engineer to help me set up my SIM7600g-h module connected to an ESP32-32 to monitor sensor data (specifically temperature and humidity) and send it to my Arduino IoT Cloud account via GSM internet. The data should be displayed in graphical charts on the cloud. I am looking for someone who can develop a code (ino) with the necessary .h files to monitor a DHT22 sensor in my Arduino IoT Cloud account, I have already done it through a Wi-Fi connection, but now I need it through GSM. I have the SIM7600G-H module, DHT22 sensor and the esp32-32 module connected and ready to test. Key Requirements: - Connect the SIM7600g-h module to ESP32-32 and Arduino IoT Cloud - Connection need to be GSM (APN: , user: webgpr, pass: webgprs2002) - Mo...

I am looking for a programmer who can develop an ESP32 program to control WS2812 LEDs for a stair lighting system. The project should incorporate a user-friendly GUI and integration with laser/PIR motion sensors. If you program ESP32, are skilled in efficiently managing WS2812 LED effects, and can combine it with a clear and aesthetically pleasing GUI, then this offer might be for you. Before contacting me, please make sure to read the full content of my advertisement and review the attached files. I will prefer someone who, after initial considerations, can propose a vision of the program in the form of an algorithm and/or a flowchart. I need a program for ESP32 to control WS2812 LEDs on stairs. The controller must work with two motion sensors (IR or laser) and in...

I need to make a firmware project on an esp32 to communicate with the p400 microhard to send nmea and rtcm RTK sentences to another p400 radio. I need someone with knowledge of protocol Satel, transeot, trimmk3, south I prefer freelancers who have knowledge in some specific areas: Facilitates communication Knowledge in the area of: Radio frequency, programming, esp32, gnss system, messages and communication protocols, nme, Sentences nmea, Real time kinematic RTK, rtcm messages

I'm looking for a skilled 3D designer to create a custom case for my ESP32 WROOM-32 based IoT device. This device will be used for smart appliance control, so the case needs to be practical and functional for this purpose. Requirements: - The case should be designed for a phone, laptop, or tablet. - It should accommodate the specific components of an ESP32 WROOM-32. - Design should be suitable for an IoT device. - The final product should be a 3D design ready for printing. -it should be able to store two 18650 batteries -Rasberry pico 1W board -bread board and it uses M2.5 screws Ideal skills and experience: - Proficient in 3D design software. - Previous experience designing cases for electronic components. - Understanding of IoT devices and smart appliance control. ...

I need a script developed for my ESP32-S3 DevKitC-1 module to monitor the battery health. This includes tracking the battery charge, discharge or full charge. Additionally, I would like to read the battery charge level. The aim of this project is to enable battery health monitoring using the "ESP32-S3 DevKitC-1 WROOM-1 N16R8 16MB FLASH WiFi Bluetooth" module. A HID compliant UPS is connected to the USB-C port on the ESP32-S3 module module Ideal Skills: - Knowledge of Arduino programming - Experience with ESP32 modules - Knowledge of battery health monitoring systems - Experience with serial communication protocols - Expertise in low power consumption optimization The script should integrate seamlessly with existing hardware and provide accurate ba...

I'm looking for a skilled freelancer who can write code for an Arduino to control a DC Motor using a DRV8234 Motor Driver over I2C. The code should allow for both spee...allow for both speed and direction control, as well as incorporating encoder feedback for motor control. Datasheet: 1 I have the RTE 3*3mm package soldered on the breakout board. I have esp32 dev module, i2c connections are done. Ideal Skills: - Proficient in Arduino programming - Previous experience with DRV8234 Motor Driver - Understanding of I2C communication protocol - Familiarity with using encoders for feedback

I am seeking a programmer with expertise in the ESP32-S3 microcontroller to help control various peripherals on a PCB. The microcontroller will be responsible for managing the emission of a scalar field, including frequency and timing. Key Responsibilities: - Program the ESP32-S3 for appropriate control functions - Ensure synchronization of scalar field emission - Optimize control for various PCB peripherals Ideal Skills: - Proficient in ESP32-S3 microcontroller programming - Experience with PCB peripheral control - Knowledge of scalar field emission and timing - Familiarity with frequency modulation

BLE GATT custom profile for ESP32 WROOM I need help for developing a 2 pass data exchange between 2 ESP32 devices using BLE. We can assume that the client has found the server and connected to it. No security features are required. Reference projects for gatt_client and gatt_server are available on the ESP website. Flow: An application running on the client (device) writes data into a buffer and passes control to the gatt_client. The gatt_client sends the content of a buffer to the gatt_server and waits for response. The gatt_server receives the data, does some processing and sends the result (content of a buffer) to the client. The gatt_client receives the data and passes the data to the application. The focus of this project is on the communication protocol between the gatt...

I need a PCB designed for prototyping and testing. The board will include some solid-state relays and an ESP32. The primary function of the ESP32 will be to handle the automation of a kitchen freezer. Ideal Skills: - Expertise in PCB design - Familiarity with solid-state relays - Extensive experience with ESP32 - Prototyping and testing skills Key Tasks: - Design a straightforward but efficient PCB - Integrate solid-state relays onto the PCB - Ensure the ESP32 is programmed for kitchen freezer automation - Deliver a prototype ready for testing Include temperature monitoring capability. Power source will be AC power. Integrate a display screen for user interface.

Battery capacity values ​​must be readable from the serial monitor with ESP32. We want to be able to read the values ​​in the attached photo.

Project for YouTube Video Editing

I'm looking to connect 3 pressure sensors, 4 switches, and 2 relay outputs to Blynk using an ESP32-C6-DevKitC-1. The relays will be controlled manually through blynk app. Key Requirements: - Provide code for this setup - Create visual instructions for Blynk for each input & output

I'm looking for an experienced programmer proficient in C and familiar with ESP32. The primary goal of this project is to develop an IoT device. Key Features: - The device should be able to collect data from various sensors, specifically a temperature sensor, a flow meter sensor and a barcode scanner. - It should also support remote control and automation features. Ideal Candidate: The perfect freelancer for this job should have a strong background in IoT device development and ESP32 programming. Experience with sensor integration and remote control systems is a plus. The device should use Wi-Fi for communication. The device should support web-based remote control functionality. The IoT device should be mains powered. The IoT device will be designed for industrial mo...

Tiger logo like example with KUWA back of it The handle of the Kuwa will be in a reflective silver or silver. The handle tan or light gray. The head of the lion is similar to the picture- reflective black so to stand out on a black t-shirt.

# PCB Design Project: Electronic Device Carrier Board ## Project Overview We're seeking an experienced PCB designer to create a carrier board for our electronic device prototype. The goal is to transition our current breadboard design into a more production-ready PCB layout. ## Current Setup Our prototype consists of the following modules: - ESP32 DevKit - 12-bit DAC - Dual 3-amp motor controller - Pressure sensor - Relay - TFT touchscreen display ## Project Requirements 1. Design a PCB layout that incorporates mounting points and connections for all the listed modules. 2. The design should prioritize ease of assembly and potential for small-scale production. 3. Use standard PCB design software (e.g., KiCad, Altium Designer, Eagle). 4. Provide complete design files, includin...

I'm looking for an experienced mobile app developer to help me create an android application that interfaces with an ESP32 device. The primary purpose of the ESP32 in this project is data logging, specifically tracking user-specific inputs. Key Requirements: - Develop a mobile application that allows users to input data via forms within the app. - Ensure seamless communication between the mobile app and the ESP32 for real-time data logging. - Prior experience with ESP32, mobile app development, and user input interface design is highly desirable. Please provide examples of your previous work involving similar projects when bidding.

roblem Statement for a Manual Coffee Grinder Hario Skerton Plus Ceramic Coffee Grinder is designed for coffee enthusiasts who value the freshness of hand-ground beans, especially in outdoor settings like camping or hiking. While it is admired for its portable size and manual operation, eliminating the need for electricity, the grinder has several design vulnerabilities when it comes to outdoor utility. Key components of Hario Skerton Plus are displayed in Figure 1, showcasing its current design. It features a cylindrical body made from materials like ceramic for the burrs and a combination of steel and glass for the rest of the structure. Despite these sturdy materials, the grinder’s construction presents issues during transport; its components are sensitive to damage, and the ...

I require a Wi-Fi captive portal system for a Realtek RTL8720dn microcontroller. The primary function of this system is user authentication through a simple username and password process. The ideal freelancer for this project should have extensive experience with the RTL8720dn microcontroller, and expertise in creating Wi-Fi captive portal systems. A specific design for the user interf...interface is not necessary. A default template will suffice. The only important thing is it must be able to redirect users to Captive Portal The current RTL8720dn Arduino library does not have DNS Server library, which is needed for Captive Portal to work, so you might need to rewrite the library or port it from another board. The captive portal MUST runs on Realtek RTL8720dn board, not ESP8266 or ...

Create an original graphic design based on the provided reference image, featuring a wine bottle and glass silhouette. The design will be cut out of metal and must meet specific aesthetic and technical requirements. Shape: The design should closely resemble a wine bottle and glass with accurate proportions and a refined silhouette. Line Weight: Lines must be bold and consistent, suitable for metal cutting. Intersections: Slight radius or curves at line intersections to ensure durability and manufacturing feasibility. Dimensions: Maximum width of 16 inches, with height proportionally scaled to match. Final graphic is delivered as a PDF file. The design should be black on a white background for easy CAD integration.

I'm in urgent need of an experienced ESP32 developer to assist with troubleshooting my WaveShare ESP32-S3 SIM7670G 4G and Lilygo T-SIMCAM boards. I've been having significant issues getting them to consistently upload and run code, even the manufacturer's demo programs. Key Issues: - Connection errors - Code upload failures - Inconsistent behavior - Other minor odd issues My goal is to have an online meeting where I can share my screen and give you control to help me troubleshoot these issues. I also need your support to better understand this platform as I prepare for a new project. I can pay by the hour and anticipate needing considerable consultation early on, with ongoing support as I continue my project and encounter new issues. I have been using both t...

...The board is not for resale, only one unit for me should be produced. The total size of the board should be max. DIN A3 size. Description: I want to create a live map on a PCB of the Seoul Metro system. The overall design should look like the attached map. There are 768 Stations so about 800 small LEDs are needed. With the respective drivers. And a few status LEDs It should run on a suitable ESP32 or Raspberry Pi Zero/Compute Module with WIFI. I will create the software by my own, but it should come with a lamp test software. The overall design should like this: LEDs in colors according to attached PDF. Can be archived by single color LEDs, RDB LEDs or while LEDs with color filter layer. Each LED must be addressable. Each LED must be labeled

I'm seeking an ESP32 specialist to assist in removing MQTT and replacing it with another protocol suited for real-time communication and alerts. Key Tasks: - Remove MQTT from the existing ESP32 project - Identify and implement a suitable replacement for MQTT - Ensure system stability and reliability following the transition Ideal candidates should have: - Extensive experience with ESP32 - Proficiency in various communication protocols - Strong problem-solving skills to maintain system stability post-transition The replacement protocol should be Firebase. "Firebase enhancements or features" The Firebase integration should utilize a real-time database. The Firebase integration should include user authentication.

I will fix the ESP32-S3-Touch-LCD-7 Project compilation error.

I'm looking for a professional to assist with a software update on my ESP32. The primary objective of this update is to remove the MQTT functionality from the device. Ideal skills and experience for this job: - Extensive knowledge and experience with ESP32 - Proficient in software updates and modifications - Familiar with MQTT and its integration on ESP32 - Problem-solving mindset for potential technical challenges

I need to develop an Android app that connects to an ESP32 board via Wi-Fi, with the ESP32 acting as a hotspot. The ESP32 is connected to several sensors and components, including: 1. ESP32 CAM for live video streaming 2. TDS (Total Dissolved Solids) sensor 3. Dissolved oxygen sensor 4. pH sensor 5. Temperature sensor 6. GPS sensor 7. 2 motors (for controlling a boat) 8. A pump (with on/off switch) The app should have three main pages: **Page 1: Live Video and Boat Control** * Display live video feed from the ESP32 CAM * Include buttons to control the boat's movement: + Forward: both motors work in the same direction + Backward: both motors rotate in opposite directions + Left and Right: different motors work * Add a switch...

...create a wireless audio streaming system using two ESP32s. This is only the start to a larger project that I plan to create but need to basic framework to get started. The setup is as follows: - ESP32 #1 acts as a bluetooth sink and receives Bluetooth audio from a phone. Use a fixed Bluetooth broadcast name, ie "RX1-C1D3" - It then sends this audio via I2C to ESP32 #2 when requested (via some command from ESP32 #2). In the end there will be multiple I2C clients all with available data on the bus. - ESP32 #2 connects to a Bluetooth speaker and plays the audio it received from ESP32 #1. This ESP32 has a 1306 OLED to show available Bluetooth speakers and allows connection to it using 2 buttons - one to cycle thru the available li...

I need help setting up the JTAG interface for an ESP32 N16R8 using PlatformIO on Visual Studio Code under Windows 11. The only milestone will be whether the JTAG can be made to work. If it takes 10 minutes then that's great, you'll be paid in full. If you can't get it to work then you won't. Maximum time for the task is 3 hours. VSC, Zadig, PlatformIO etc are already installed but can be re-installed if necessary. USB 3/4 ports only (not USB 2). Project to be undertaken using Zoom.

I'm seeking assistance with my existing PCB design in Altium. The project involves very few m...components, ensuring and improving the overall thermal performance of the board. This is a very quick task. Key tasks include: - Adding new power management components to the existing design. - Making routing adjustments as required. - Implementing heat sinking methods for thermal performance improvement. I'm looking for someone with a strong background in PCB design, particularly with Altium and ESP32, who can help optimize my design in a quick 1-2 hour session. Experience with implementing ground fills, hash patterns, and ground traces for noise/ESD protection and crosstalk minimization would be highly beneficial, as one of the key tasks is to integrate hash patterns for n...

My ESP32 application, currently utilizing the AWS IoT Embedded SDK uses WIFI to send data to our MQTT endpoint. We require the integration of cellular connectivity. We are using the Quectel BG95 modem. We are using FreeRTOS for task management. Key Requirements: - Modify the existing embedded C code for the ESP32 to incorporate cellular connectivity. - I would prefer if you can provide the connectivity layer to use the existing code Ideal Skills and Experience: - Proficient in embedded C programming. - Extensive experience with ESP32 and AWS IoT Embedded SDK. - Proven track record in implementing cellular connectivity in IoT applications.

I'm seeking an expert in PCB design to create a custom board for a TFT display interfaced with an ESP32-S3. The primary purpose of this display is to serve as a user interface for controls. Therefore, the design should facilitate touchscreen inputs and cater for robust, responsive control. Key components of the project include: - Designing for wireless charging, specifically adhering to the Qi standard. - Incorporating LoRa for long-range communication. - Ensuring the PCB is compatible with a TFT display. Ideal candidates would have: - Extensive experience in PCB design. - Prior work with ESP32-S3 and TFT displays. - Knowledge of touchscreen integration. - Expertise in wireless charging standards, particularly Qi. - Proficiency in designing for LoRa compatibility. - A ...

PCB design for the "GrowDoser 2025" automated plant care system. Evaluation of the new PH/EC probe YY-400P is a key task. The board will control pH/EC sensors, pumps, water level, relays, and RGB strips, featuring MCU like ESP32. The project includes schematic design, PCB layout, and component selection. The PCB must be ready for PCBA by PCBWay, and the files must be compatible with EasyEDA. Deliverables include schematics, BOM, and final files.

Are you quick and comfortable with C/C++ and easy to cooperate with, then you might be the one we looking for to become our ongoing partner in our project

...applications using Texas Instruments microcontrollers and ESP32. The firmware should support: - Sensor Data Collection: The firmware will need to interface primarily with temperature and environmental sensors. - Wireless Communication: The preferred protocol for this project is narrowband IoT. The firmware should ensure robust and efficient communication over this network. Also applications using TI15.4 - Power Management: Given the low consumption requirement, the firmware should incorporate effective power management techniques to prolong device lifespan. Ideal candidates for this project should have extensive experience in firmware development for IoT applications, particularly with Texas Instruments microcontrollers and ESP32. They should also be proficient in narro...

Subject: Request for Quotation: Arduino Programmer for ESP32 Automated Unloader Project ________________________________________ We are seeking a skilled Arduino programmer to assist with our ESP32-based automated unloader mechanism project. Below are the details of the project and the scope of work we require: Project Overview We have developed an automated unloader mechanism controlled by an ESP32 microcontroller. The primary codebase is largely complete and will be provided to qualified candidates upon request for quoting. Scope of Work • Code Organization & Housekeeping: o Organize and group existing code lines for improved readability and maintenance. o Add necessary comments and documentation to enhance code clarity. o Identify and remove an...

I'm facing issues connecting my ESP32 to my Lenovo laptop with AMD Ryzen 5000 and Windows 11. The Arduino IDE isn't sending sketches to the ESP32 due to a COM port problem. I need help configuring the COM port settings so I can connect the ESP32 to a SIM A7670C 4G LTE Development Board for data uploading. I have tried troubleshooting by updating drivers, changing the USB cable or port, and using a different computer, but the COM port is still not recognized by Windows 11. Ideal skills for this job include: - Expertise in Windows 11 and its COM port settings - Experience with Arduino IDE - Knowledge of ESP32 and SIM A7670C 4G LTE Development Board - Ability to troubleshoot hardware and software connection issues.

I need help creating written examples in the format of an informative report. Ideal candidates should have experience in report writing and can create engaging, informative content. Please note, I will provide a perfect example and you will learn from it. Your task will be to: - Generate written examples in the format of an informative report - Ensure the examples are not similar to AI generated content Skills Required: - Excellent written communication - Report writing experience - Ability to create engaging content

...improving the overall thermal performance of the board. Key tasks include: - Adding new power management components to the existing design. - Adjusting USB traces to meet 90-ohm differential impedance requirements and enhancing noise/ESD protection. - Implementing strategies to reduce heat across the PCB. I'm looking for someone with a strong background in PCB design, particularly with Altium and ESP32, who can help optimize my design in a quick 1-2 hour session. Experience with implementing ground fills, hash patterns, and ground traces for noise/ESD protection and crosstalk minimization would be highly beneficial. Requirements: - Proficient in PCB design software - Experience with schematic modifications - Able to reroute traces and reposition components on PCB - Go...

...improving the overall thermal performance of the board. Key tasks include: - Adding new power management components to the existing design. - Adjusting USB traces to meet 90-ohm differential impedance requirements and enhancing noise/ESD protection. - Implementing strategies to reduce heat across the PCB. I'm looking for someone with a strong background in PCB design, particularly with Altium and ESP32, who can help optimize my design in a quick 1-2 hour session. Experience with implementing ground fills, hash patterns, and ground traces for noise/ESD protection and crosstalk minimization would be highly beneficial. Requirements: - Proficient in PCB design software - Experience with schematic modifications - Able to reroute traces and reposition components on PCB - Go...

...Adjusting USB traces to meet 90-ohm differential impedance requirements and enhancing noise/ESD protection. - Implementing strategies to reduce heat across the PCB. I'm looking for someone with a strong background in PCB design, particularly with Altium and ESP32, who can help optimize my design in a quick 1-2 hour session. Experience with implementing ground fills, hash patterns, and ground traces for noise/ESD protection and crosstalk minimization would be highly beneficial. [Removed by Admin] would appreciate it if you could share prior ESP32 design examples for reference. Thank you! Requirements: - Proficient in PCB design software - Experience with schematic modifications - Able to reroute traces and reposition components on PCB - Good communication skills in...