Esp32 arduino wifi example jobs
I'm looking for a skilled professional who can help me collect data from my Arduino sensors and transfer it to a MySQL database. The data includes temperature, pressure and altitude readings. Key Project Details: - Data Collection: The sensors will be collecting data every second. So, efficiency is key. - Connection: The connection to the database will be through both Wi-Fi and wired Ethernet. Experience with both types of connections is necessary. Ideal Skills: - Proficient in Arduino programming - Strong knowledge of MySQL - Experience with sensor data collection - Familiar with Wi-Fi and wired Ethernet connections Please provide examples of similar projects you've completed in your proposal. Thank you.
This is to bring attention to my programming CONTEST at: https://www.freelancer.com/contest/CrossPlatform-basic-example-app-with-JNI-Flutter-or-KotlinNative-Multiplatform-for-AndroidiOSetc-EST-2514642/details So do not BID here, instead GO TO the CONTEST at: https://www.freelancer.com/contest/CrossPlatform-basic-example-app-with-JNI-Flutter-or-KotlinNative-Multiplatform-for-AndroidiOSetc-EST-2514642/details
The basic example app is simple, just include several small binaries of Hello-World compiled/built with Rust/C/C++/golang and the app must execute them and display the app message in an activity or 'view'. So you will need to use JNI or ffi or channels or bridges if using flutter etc. You can use whatever cross-platform method you prefer. You must provide all sources and binary for Android and one other platform. Clear? The app will simply call several versions of "Hello World!" binaries (one in C, C++, Rust..) inside the "Apk" for example, and display the Hello World output in some GUI (graphical view/user interface) of the app. You can post just the BINARIES and provide the Source Code "after" you are AWARDED the contest. THAT&#...
I'm seeking a skilled PCB designer with experience in Arduino Nano applications. The PCB's primary function will be controlling 1 to 2 servo motors. Uses four potentiometers, an ACS 712 5amp current sensor, a button, a buzzer, a voltage step down module looking for $100 or less bid. Key Requirements: - Design a PCB that interfaces with an Arduino Nano. - Controls 1-2 servo motors. - Primarily focused on motor control. Ideal Skills: - Extensive knowledge of PCB design. - Proficient in Arduino Nano programming. - Prior experience in designing PCBs for motor control.
I'm looking for an experienced engineer to design a 27Mhz transmi...work effectively in an urban environment and achieve long-range transmissions of up to 5-10km at a speed of 100bps. Key specifications: - The sleep current must not exceed 100uA to ensure power efficiency. - The data will be transmitted in binary format and needs to be sent & received through an Arduino microcontroller. - transmitter Power should be less than 1 watt. Ideal skills and experience for the job include: - Proficiency in radio frequency engineering. - Extensive experience with Arduino and microcontroller programming. - Knowledge of binary data encoding and transmission. - Ability to design systems for urban environments with potential interference. Please submit your proposal if you ca...
I need assistance with troubleshooting an Arduino program that is not sending output to the serial monitor as expected. The program controls a mega board along with a PWM board to drive 9 servos, and recent modifications did not yield the outputs anticipated through debugging lines in Serial Monitor. Requirements: - Expertise in Arduino programming and debugging. - Ability to analyze code behavior for serial communication issues. - Experience in resolving hardware compatibility conflicts with Arduino boards and components. - Effective diagnosing of communication between PWM handling library, Servo Motor control, and Mega Board. Deliverables: - A fully functioning debugged program with visible outputs via the Serial Monitor. - Documentation of findings and fixes appli...
I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. The app is already made by me in thunkable Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, ...
More details: What type of items will the CNC machinist primarily work on? Metal components - mostly stainless steel parts Which machining operations are required for these metal components? Turning, Milling, Drilling - none but he needs to have the understanding to see whats invoved in the job to order material. What kind of drawing formats will the CNC machinist be working with? DXF files - and pdf drawings.
I'm looking for a skilled programmer to help me with an Arduino project. The main goal is to control actuators via Arduino. This involves: - Motor Control: The Arduino will primarily be used to control motors. - Actuator Management: Specifically, I need these motors to control actuators, enabling linear motion. The ideal freelancer for this job should have extensive experience with Arduino programming and motor control. Experience with other types of Arduino projects would be a plus. I am looking for someone who can deliver high-quality work in a timely manner.
...research skills - awareness of basics of heating We want a simple table populating for all the products Company (eg ACME) Range Name (eg California) Style description (eg Vertical columns - you can choose something sensible) Construction Material (eg oil filled aluminium panels) Dims (h x w x d) Wt (kg) Wifi (Yes/No) Power (Watts (eg 1200) Typical competitive online price (eg £200) or trade price Source of price (eg reseller ) or company website Picture of an example of that Range Name (just to identify, low quality is OK). I have spreadsheet template I can send. Everything that hase the same name and style description should be part of the same family that will just vary in dimensions and power. I have a list of 11 companies and each might have 10 products...
...skilled developer to create an Arduino-powered network voltage monitor for specific battery-operated devices. This project involves designing a device that can monitor dual DC battery inputs, typically in the range of 30-60v DC. The device should also be powered by Power Over Ethernet (POE). Key Requirements: - The monitor must have web browser-based access for live data monitoring. Compatible with iOS and Mac. - It should be capable of dual voltage monitoring (with a voltage range of 30-60v DC) and potentially dual current monitoring for two DC battery inputs (with a maximum draw of 10 amps). - Experience with Arduino and network-based projects is a must. - The web browser-based access must also include functionality to change the IP address/subnet of the Arduino...
I'm looking for a cross-platform (iOS & Android) app that can control LED lights via Wi-Fi. The app should allow users to: - Change colors using a simple color picker. - Utilize pre-set lighting patterns. - Create their own using customizable patterns. Additionally, the app should have a scheduling feature to turn the lights on and off at specific times. Ideal candidates for this proje...own using customizable patterns. Additionally, the app should have a scheduling feature to turn the lights on and off at specific times. Ideal candidates for this project should have prior experience in developing cross-platform apps, particularly for controlling smart home devices. Strong skills in UI/UX design will also be beneficial, as the app needs to be user-friendly. Basic skills C++...
...Here is the website: www.cmctelco.com. I am not trying to replace my existing SEO company so please do not pitch that to me it will be rejected. I am looking for some fresh eye on how I can boost our SEO game and produce better results. Some ideas I have is adding webpages that make it very clear what our service area is for example, one of our keywords is cabling contractor. Maybe making a page called “cabling contractor austin” to refine our services areas for example. Maybe a boost of links every month? Just do the reach search and make a proposal please. My monthly SEO company does not make changes to my website, so only offsite SEO. But my SEO company is doing a fantastic job and have us first page ranked now but we need an extra push as our competitors ar...
I'm in need of a hardware support expert for my RFID Card Reader project, which utilizes Arduino and GSM Modules. The data logs from the project need to be saved on Firestore. Key Responsibilities: - Setting up the RFID Card Reader - Integrating the Arduino and GSM Modules - Ensuring seamless logging of data to Firestore - Troubleshooting any hardware-related issues Ideal Skills: - Extensive experience with Arduino and GSM modules - Prior work with RFID Card Readers - Proficient in setting up and using Firestore - Strong problem-solving skills Please note, I will provide the RFID Card Reader, Arduino and GSM Module. However, the ideal candidate should have access to additional hardware for troubleshooting and testing purposes. Only apply if you have con...
I'm seeking a Python developer experienced with M5Stick C Plus 2 programming and the Telegram Bot API. The project involves creating a solution that records audio from the built-in mic, encodes it into MP3 format, and sends voice messages over WiFi via Telegram. Key Requirements: - Program the M5Stick C Plus 2 to record audio and send it through a Telegram bot. - Use the built-in microphone. - Implement MP3 encoding of the audio. - The Telegram bot should be able to send the recorded messages. - Deliverables should include the source code, comprehensive setup instructions, and optional support for testing. Ideal candidates should have: - Proven experience in Python programming. - Familiarity with M5Stick C Plus 2 and its capabilities. - Prior work with the Telegram Bot API. -...
Please do not apply if you understand the following. [ Purpose ] : My Brushless ESC integrated to Flight Controller(FC) is lower current...Flight Controller(FC) is lower current than 20A. I want to use independent another 40A ESC without any modification of Brushless ESC integrated to Flight Controller. [ Connection Diagram ] Brushless 20A ESC integrated to FC -> out signal(three phase power) of ESC -> Module (need to develop) -> pwm signal(+5v) -> ESC 40A -> output signal -> Brushless motor [ Todo list ] : 1. Schematic(Arduino and so on) and Firmware, Technical Document for Converting Input Signal to Output Signal - Input Signal : Output signal(three phase power) of one Drone Brushless ESC - Output Signal : Control Signal(PWM/+5v) to control...
...areas listed below, we would love to hear from you! How It Works: - *Charge:* ₹10 to ₹1000 per minute - *Earnings:* 70% credited directly to your account - *Work Flexibility:* No fixed hours; you work at your convenience Project Categories & Expertise Required: 1.*Digital Services* - Digital Marketing - E-commerce - Website Development - Product Development & Design - WiFi and Network Setup 2. *Agriculture* - Precision Agriculture (Crop Selection, Soil Management, Pest & Disease Control) 3. *Animal Husbandry* - Dairy Farming - Livestock Management - Poultry Farming - Fisheries 4. *Marketing* - Lead Generation - Brand Management - Distribution Channels 5. *Personal Finance* - Investment...
My PCB for industrial machinery has been failing and I need a professional to review my schematic and board layout files. The board is controlled by an ESP32 and displays via a Nextion on UART. Issues to Address: - Interference between components - Unexpected resets or failures - Communication errors with peripherals Measures Taken: - Shielding - Filtering - Grounding techniques - Decoupling - Suggestions for field wiring to board -component values -adding any protection components or change values I look forward to your expertise in identifying any potential issues that could cause my board to fail in this industrial setting.
I'm looking for a skilled developer to create a comprehensive school portal for our college using Python and Django. The portal should encompass several key functionalities, primarily focused on student management and grading systems, while also integrating library access, WiFi management, and exam processing, online fee payment system. The student management system is a critical component of the portal. It should be able to handle: - Detailed Student Profiles: Each profile should be comprehensive, containing all necessary information about the student. In your application, please provide examples of past work that you have done that is similar to this project. I am particularly interested in seeing examples of complex web applications that you have developed in the past. I...
I need assistance troubleshooting and correcting some Arduino code. The code is supposed to turn on a small pump and keep it running until a set conductivity threshold (780) is reached in the water. This is part of a larger science fair project focused on Diabetes. Ideal Skills: - Proficient in Arduino programming - Experienced in troubleshooting and correcting code - Knowledgeable about conductivity sensors The task should be relatively quick and straightforward for someone with the right skills and experience. Please reach out if you can help. Thank you!
...codebase developed in the Arduino environment. The project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino ...
...your offer is I'm seeking a professional to create a kit with a set of WiFi and Bluetooth Canbus controllers, and possibly a card, to read Canbus messages from a car and render gauges on an iOS UI. Key Responsibilities: - Develop a comprehensive kit with the necessary controllers. - Code to interface with the Canbus and display messages on the UI. - Utilize Virtuno, an app that creates gauges from a remote controller, as a starting point. The Canbus messages of interest will encompass all types, with a list of specific messages provided later. Ideal Skills: - Proficient in iOS development - Experience with Canbus systems - Skilled in hardware assembly and integration - Familiarity with Virtuno app - Knowledge of WiFi and Bluetooth communication methods This pr...
...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capab...
Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...
I'm looking for an experienced Arduino programmer and circuit designer to build a simple circuit that can send readings from two fuel optical sensors over the longest range radio available. Key Requirements: - located in Great Britain - Knowledge in Arduino programming and circuit design. - Experience with fuel optical sensors preferred. - Proficient in implementing long-range radio communication, ideally LoRa. - Ability to design a battery-powered circuit. The circuit should take readings from the two sensors, which output 5V when in air and a neutral 3 wire, and send these readings over the radio. The circuit will be powered by a battery.
I'm experiencing sporadic connectivity issues with my home automation project. The setup involves an Arduino Uno and an ESP8266 WiFi module. Key Issues: - The Arduino Uno seems to go offline without a clear reason. - Unsure how to bring it back online. Ideal Skills and Experience: - Proficient in working with Arduino boards, particularly the Arduino Uno. - Hands-on experience with the ESP8266 WiFi module. - Strong troubleshooting skills for connectivity issues, especially with COM port. - Background in home automation projects would be a plus.
I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.
I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.
I am seeking a talented Web Developer to assist in completing my career guidance website project. The UI design has been created in Figma, and the Machine Learning models have been developed - all resources will be provided. Your role will be to integrate three pre-built Machine Learning models into the site, develop and finalize the website according to the provided UI interface and models, and ensure the entire project runs smoothly and offers a user-friendly experience. Ideal candidates should be proficient in both front-end and back-end web development, have experience integrating Machine Learning models into web applications, and possess a strong understanding of responsive design and user experience.
I'm looking for a developer experienced with Eclipse Theia to create a project navigator application based on a JSON feed tree. Key Features: - A detailed page with multiple tabs similar to Eclipse's development interface. - A tree navigator which displays JSON data. Right-clicking on a tree object brings up a context menu to draw a simple circular layout network diagram. - When a node of the diagram is clicked, the node's properties are shown in a property table and help information is displayed in a right pane. - The ability to print the diagram from a top menu print tool. - A three-pane layout consisting of a diagram pane, a detail information pane and a help pane. Data and Implementation: - The application will source its JSON feed from local files. - The network diag...
I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.
...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...
...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:
...an experienced developer specializing in Arduino and Android applications, and I would be delighted to assist you in creating your moisture sensor app. Project Overview The app will: Hardware: The ESP8266 module will handle Wi-Fi connectivity, communicating with the app. Sensors can be simulated or real, depending on your requirements. App Features: A clean interface inspired by your provided pictures. Real-time updates for sensor values. Customizable moisture thresholds for user-defined control. Development Process: Initial setup and design of the user interface. Integration of the ESP8266 for seamless communication. Testing with both simulated and real sensors to ensure reliability. Why Choose Me? Extensive experience working with Arduino and ESP8266 modules. Pro...
Please Sign Up or Login to see details.
I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technology, and LED displays.
I need an expert in network security to help identify unauthorized users on my home wifi network. The main objective of this project is to pinpoint any potential wifi thieves. Key aspects of the project: - I am specifically looking for software-based detection methods. - Experience with network security and unauthorized user detection is crucial. - I would prefer someone who can deliver a comprehensive report on the findings. Your bid should reflect your ability to meet these requirements.
I'm looking for a Tuya expert who can help me create a Python function to set my single electricity meter (a 1 channel smart power clamp) into pairing mode. The function should also send the SSID and password of my current network setup. NOTE: the Tuya device is in a known wifi network; after receiving the command it will switch to the new one Key Details: - Device Type: The project involves a Tuya-compatible single electricity meter, specifically a 1 channel smart power clamp. - Interaction Method: The function will control the device locally via the LAN protocol. - Network Information: The function should be able to utilize both the SSID and IP address of the network. Ideal Skills and Experience: - Proficiency in Python - Experience with Tuya devices - Knowledge of Local c...
...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...
I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...
...animations like blinking, rolling, and complex eye-like movements. This project will use an ESP32 microcontroller and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong...
I am looking for a professional to help create unique, animated car headlights for my vehicle. The headlights should resemble expressive eyes and be able to perform various synchronized animations such as blinking, rolling, and complex eye-like movements. Key project requirements include: - Utilizing an ESP32 microcontroller and two GC9A01 TFT displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Expe...
I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an S...
I am looking for a skilled Arduino developer to create an interactive, sensor-based educational model. Key Requirements: - Extensive experience with Arduino programming - Proven track record of creating interactive models - Ability to integrate various sensors into the model - Excellent communication skills to explain the project and its educational benefits The goal of this project is to create an engaging tool that can facilitate learning in a fun and interactive way. It should be robust, reliable, and easy to use. Experience in educational tool development is a plus.
As a part of Kilobytes Data Solutions, a company delivering technical support and services in the networking and communications sector, we are in need of IT professionals on a contract / freelance arrangement for varies c...existing clients. Key responsibilities: - Offering continuous technical support to our clients - Planning and consulting for network design and infrastructure - Troubleshooting any networking issues that may arise Your expertise should ideally include: - Extensive experience in IT Infrastructure design - Proficiency in configuring internet gateways - Expertise in setting up and optimizing LAN and WiFi infrastructure If you're passionate about providing high-quality IT support and enhancing network infrastructure, I'd love to hear from you. - see job ...
I'm looking for a skilled iOS developer to create a minimalistic, user-friendly app for monitoring moisture levels via Arduino sensors. The app will connect with 1 to 8 sensors over Wi-Fi, displaying their readings on a grid layout. Key Features: - User can set a default moisture level - Visual feedback: table turns red when moisture exceeds the set level, stays green when below - Option to display readings from 1, 4, or all 8 sensors - Push notifications alerting the user to changes in moisture levels Ideal Skills and Experience: - Proven experience in iOS app development - Prior work with IoT (Internet of Things) applications is a plus - Strong understanding of minimalistic design principles - Experience implementing push notifications in apps - Knowledge of creating grid l...
