Esp32 lora arduino jobs

My PCB for industrial machinery has been failing and I need a professional to review my schematic and board layout files. The board is controlled by an ESP32 and displays via a Nextion on UART. Issues to Address: - Interference between components - Unexpected resets or failures - Communication errors with peripherals Measures Taken: - Shielding - Filtering - Grounding techniques - Decoupling - Suggestions for field wiring to board -component values -adding any protection components or change values I look forward to your expertise in identifying any potential issues that could cause my board to fail in this industrial setting.

I'm in need of a hardware support expert for my RFID Card Reader project, which utilizes Arduino and GSM Modules. The data logs from the project need to be saved on Firestore. Key Responsibilities: - Setting up the RFID Card Reader - Integrating the Arduino and GSM Modules - Ensuring seamless logging of data to Firestore - Troubleshooting any hardware-related issues Ideal Skills: - Extensive experience with Arduino and GSM modules - Prior work with RFID Card Readers - Proficient in setting up and using Firestore - Strong problem-solving skills Please note, I will provide the RFID Card Reader, Arduino and GSM Module. However, the ideal candidate should have access to additional hardware for troubleshooting and testing purposes. Only apply if you have con...

Please do not apply if you understand the following. [ Purpose ] : My Brushless ESC integrated to Flight Controller(FC) is lower current...Flight Controller(FC) is lower current than 20A. I want to use independent another 40A ESC without any modification of Brushless ESC integrated to Flight Controller. [ Connection Diagram ] Brushless 20A ESC integrated to FC -> out signal(three phase power) of ESC -> Module (need to develop) -> pwm signal(+5v) -> ESC 40A -> output signal -> Brushless motor [ Todo list ] : 1. Schematic(Arduino and so on) and Firmware, Technical Document for Converting Input Signal to Output Signal - Input Signal : Output signal(three phase power) of one Drone Brushless ESC - Output Signal : Control Signal(PWM/+5v) to control...

We are seeking a skilled developer or team to design and develop a dynamic 4G and LoRa-based device with integrated MQTT communication and call functionality. The device should be compact, reliable, and capable of seamless data transmission via MQTT protocol while supporting voice call capabilities. The project includes hardware and firmware development, ensuring scalability and dynamic performance. Project Requirements: 1. Hardware Specifications: A 4G module for high-speed cellular connectivity. LoRa module for long-range communication. Microcontroller unit (MCU) to manage operations efficiently. Support for SIM card insertion for cellular functionality. Integrated microphone and speaker or support for external peripherals for voice calls. Adequate power management s...

I need assistance troubleshooting and correcting some Arduino code. The code is supposed to turn on a small pump and keep it running until a set conductivity threshold (780) is reached in the water. This is part of a larger science fair project focused on Diabetes. Ideal Skills: - Proficient in Arduino programming - Experienced in troubleshooting and correcting code - Knowledgeable about conductivity sensors The task should be relatively quick and straightforward for someone with the right skills and experience. Please reach out if you can help. Thank you!

...codebase developed in the Arduino environment. The project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino ...

...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities...

Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...

...Deliverables Complete Animation Video: With background music and sound effects. Source Files: Adobe Animate, After Effects, or preferred software files. Assets: Any graphics, illustrations, or templates used. Resources Provided We will share: Brand logo and color palette - logo will be provided to winning entry Brand colors - Primary: #01261C, others - #64732F, #A3bfd9, #D9A05B, #A68C41 Font Family - Lora and Playfair Display Judging Criteria Creativity and originality. Alignment with the scene details provided. Animation quality and smooth transitions. Clear communication of the eco-friendly brand story....

I'm looking for an experienced Arduino programmer and circuit designer to build a simple circuit that can send readings from two fuel optical sensors over the longest range radio available. Key Requirements: - located in Great Britain - Knowledge in Arduino programming and circuit design. - Experience with fuel optical sensors preferred. - Proficient in implementing long-range radio communication, ideally LoRa. - Ability to design a battery-powered circuit. The circuit should take readings from the two sensors, which output 5V when in air and a neutral 3 wire, and send these readings over the radio. The circuit will be powered by a battery.

I'm experiencing sporadic connectivity issues with my home automation project. The setup involves an Arduino Uno and an ESP8266 WiFi module. Key Issues: - The Arduino Uno seems to go offline without a clear reason. - Unsure how to bring it back online. Ideal Skills and Experience: - Proficient in working with Arduino boards, particularly the Arduino Uno. - Hands-on experience with the ESP8266 WiFi module. - Strong troubleshooting skills for connectivity issues, especially with COM port. - Background in home automation projects would be a plus.

I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.

I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.

I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.

...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...

Wire Game arduino code. .

...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:

...an experienced developer specializing in Arduino and Android applications, and I would be delighted to assist you in creating your moisture sensor app. Project Overview The app will: Hardware: The ESP8266 module will handle Wi-Fi connectivity, communicating with the app. Sensors can be simulated or real, depending on your requirements. App Features: A clean interface inspired by your provided pictures. Real-time updates for sensor values. Customizable moisture thresholds for user-defined control. Development Process: Initial setup and design of the user interface. Integration of the ESP8266 for seamless communication. Testing with both simulated and real sensors to ensure reliability. Why Choose Me? Extensive experience working with Arduino and ESP8266 modules. Pro...

I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technology, and LED displays.

...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...

I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...

...animations like blinking, rolling, and complex eye-like movements. This project will use an ESP32 microcontroller and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong backgr...

I am looking for a professional to help create unique, animated car headlights for my vehicle. The headlights should resemble expressive eyes and be able to perform various synchronized animations such as blinking, rolling, and complex eye-like movements. Key project requirements include: - Utilizing an ESP32 microcontroller and two GC9A01 TFT displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Expe...

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an S...

I am looking for a skilled Arduino developer to create an interactive, sensor-based educational model. Key Requirements: - Extensive experience with Arduino programming - Proven track record of creating interactive models - Ability to integrate various sensors into the model - Excellent communication skills to explain the project and its educational benefits The goal of this project is to create an engaging tool that can facilitate learning in a fun and interactive way. It should be robust, reliable, and easy to use. Experience in educational tool development is a plus.

I'm looking for a skilled iOS developer to create a minimalistic, user-friendly app for monitoring moisture levels via Arduino sensors. The app will connect with 1 to 8 sensors over Wi-Fi, displaying their readings on a grid layout. Key Features: - User can set a default moisture level - Visual feedback: table turns red when moisture exceeds the set level, stays green when below - Option to display readings from 1, 4, or all 8 sensors - Push notifications alerting the user to changes in moisture levels Ideal Skills and Experience: - Proven experience in iOS app development - Prior work with IoT (Internet of Things) applications is a plus - Strong understanding of minimalistic design principles - Experience implementing push notifications in apps - Knowledge of creating grid l...

I'm looking for an experienced PCB designer to modify an existing BLE sensor PCB design to integrate a LORA microcontroller. The new design should retain the following functionalities from the original BLE sensor PCB: - Power management - Sensor interfacing The modified LORA-enabled PCB will be operating in an indoor environment. Key requirements for the new system: - Real-time monitoring - Data logging - Event-based alerts The ideal freelancer for this project should have a strong background in PCB design, specifically with LORA and BLE technologies. Experience in designing PCBs for indoor use is also preferred. Excellent skills in power management and sensor interfacing are essential. The ability to understand and implement complex data transmission systems ...

I am looking for an experienced coder to convert my Arduino code to work with the Padauk PMS152. This is for a customized application aimed at enhancing my business operations. Key Responsibilities: - Retain and adapt the specific functionalities from the Arduino code: sensor data handling, communication protocols, and actuator control. - Ensure the converted code is optimized for a Padauk PMS152. The ideal candidate will have extensive experience with both Arduino and Padauk coding and a good understanding of developing custom applications for business purposes. Familiarity with sensor data handling and communication protocols is crucial. Please include in your proposal examples of similar projects you have completed.

I am in need of a detailed wiring diagram for my Arduino R3 project which controls a Stepper motor. The connections are already listed, but I would like a professional and clear diagram to wire from. Key Project Details: - The wiring diagram needs to be in PDF format. - It should be created using Fritzing software. - The diagram should include detailed labels for all connections. Ideal Skills and Experience: - Proficiency in using Fritzing software. - Prior experience in creating wiring diagrams for Arduino projects. - Attention to detail to ensure all connections are accurately represented and labelled.

I'm seeking a skilled Arduino coder to help me write a program for a radio sweep unit using a TEA5767 and an Arduino Uno. The unit should include: - A button to start and stop the sweep - A button to switch between forwards and reverse sweeps - A button for a random sweep - A potentiometer to adjust the sweep speed - An I2C IIC LCD 1602 Module to display the current frequency, sweep rate, and sweep direction, all on separate lines - A signal strength indicator The code must utilize pull-up resistors for the buttons. The ideal candidate should have extensive experience with Arduino programming, specifically with the LiquidCrystal_I2C.h library for the I2C display module. The display should be set to show separate lines for each piece of information. Please includ...

I'm seeking a professional consultation on the ESP32-S3 SIM7670G 4G Development Board. The primary application for this project is remote monitoring of security and surveillance data via analog cameras. Key Responsibilities: - Provide expert guidance on the optimal use of the ESP32-S3 SIM7670G 4G Development Board for remote security monitoring. - Assist in the integration of analog cameras with the board for effective surveillance. - Recommend best practices for data collection and transmission. Ideal Skills: - Extensive experience with the ESP32-S3 SIM7670G 4G Development Board. - Proficiency in IoT and remote monitoring systems. - Strong understanding of security and surveillance systems, particularly with analog cameras. - Excellent communication skills for...

I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, searching for a BLE beacon and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, etc. - Willing to...

...double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The ESP32, SIM800L, and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1″ (2.54 mm) spacing through holes. 6 X 14 CM PCB Board - Power PCB 14 x 14 CM PCB Board ESP32 38Pin Development Board --> Hi Link HLK-PM01 5V/10W --> 2.54mm Pin Female Single Row Header Strip -->

I'm looking for a skilled Arduino developer to create an interactive maze game using basic sensors and LEDs, with button presses as the main form of interaction. The game should challenge players to navigate a maze without touching the boundaries. Key project components: - Utilization of basic sensors and LEDs - Interactions primarily through button presses - Game objective centered around navigating a maze Quisiera que me programara el codigo en Arduino UNO. Basicamente una vez empezado el juego , el jugador tiene un tiempo determinado para completar el laberinto si tocar el cable, si lo consigue se da un codigo a traves de mensaje. dejo un enlace a un video de yotutube que es exactamente lo que quiero hacer:

I'm looking for a skilled developer to create a straightforward VST utility plugin. The primary function of this plugin is to output audio from a mixer track over USB to an ESP32. Key Requirements: - The VST utility tool needs to be compatible with both Windows and macOS platforms. - Understanding and experience with ESP32 integration will be a significant advantage. - Knowledge in developing VST plugins and audio processing will be highly beneficial. Please ensure to include examples of your previous work with VST plugins in your proposal.

I'm looking to hire someone to work on a little experimentation project. The project includes programming with Arduino and synth sequencers. The primary function of this system will be to control the speeds of a stepper motor from a control voltage synth sequencer through Arduino. The project requires: - The ability to design and implement a system with arduino that can control a step-motor and use components such as quadrature encoders and switches. - The capability to create a system that allows for CV control from a synth sequencer. Thanks for your attention and looking forward to hear from one of you. Best greetings to you all

Please Sign Up or Login to see details.

I need an expert in data security, privacy, and blockchain to work on a project involving secure proximity activations using smart devices. Overview: - The system should be activated by a SmartPhone entering a location. - The system should open gates, turn on lig...(BLE) Secure Connection for security. Skills and Experience Required: - Extensive knowledge in data security and privacy. - Proficient in integrating with smart devices. - Experience working with Bluetooth Low Energy (BLE) Secure Connection. - Familiarity with using MPU (Raspberry) devices and Docker Container-based System. - A new advertisement system should be adopted. (Or alternatively - MCU (ESP32) devices are considered leveraging Jaguar Container-based Systems - Secure Proximity Activations MCU-based in TOIT langu...

...of a comprehensive Arduino library for the AMC131M03 ADC that is compatible with the SAMD core (like the Arduino Zero). This library should support all possible features of the ADC, including reading values, calibrating readings, and robust error handling and reporting. Key Requirements: - Full compatibility with the SAMD core - Support for 24-bit ADC resolution - Extensive functionalities: Reading ADC values, Calibrating ADC readings, Error handling and reporting, etc.. Ideal Skills and Experience: - Proficiency in Arduino library development - Strong understanding of the SAMD core - Experience with 24-bit ADCs - Excellent debugging and error handling skills - Previous work with AMC131M03 ADCs is highly desirable Many libraries already existt on Github, ADS131M0...

I'm working on a project involving a vehicle speed detection system. This system should be integrated with an Arduino microcontroller and use induction loop technology. The target vehicles will be toy-sized cars. The main tasks for this project include: - Detecting and calculating the speed of the toy cars passing over the induction loop. - Outputting the speed data and triggering a single LED to flash when a predefined speed threshold is exceeded. - The speed threshold will be a fixed value defined in the code. The ideal freelancer for this project should have a strong background in electronics, specifically with Arduino and induction loop technology. Experience with speed detection systems will be a plus. I am looking for someone who can deliver a reliable and accura...

I'm looking for an expert in electronics who can design a RGB LED circuit board for a custom electronics project. Key Requirements: - The circuit board will control a 12x12 inch matrix of dot LEDs - The control will be via a microcontroller, specifically an Arduino or Raspberry Pi or Teensy 4.1 Ideal Skills: - Expertise in circuit design and microcontroller programming - Experience with RGB LED projects - Ability to create a 12x12 inch matrix of dot LEDs

I'm looking for an expert in Arduino software development with a focus on robotics control. The project involves developing software that allows an Arduino to interact with DHT11 temperature sensors. Key requirements: - Extensive experience with Arduino programming - Understanding of robotics control - Proficiency in interfacing with temperature sensors, specifically DHT11 - Ability to develop efficient, reliable software for robotic control Your task will be to create a system that can effectively utilize the DHT11 sensors for temperature monitoring and control within a robotic framework. Please provide examples of similar projects you've completed in your bid.

My existing Android application is very old and targets SDK version 19 or so. I require it to be migrated to AndroidX and to be compatible with Android 14. The app is basically a little webserver and webpage, and communicates with an Arduino via the AOA protocol. Key Requirements: - Convert the app to run on Android 14. Ideal Skills: - Experience in Android app development and upgrades.

...friendly curves. - Usage: Suitable for body text and smaller elements, maintaining a contemporary look. ### Accent Fonts (Optional) 5. **Lora**: - Characteristics: A serif font with a touch of elegance and readability. - Usage: Can be used for quotes or testimonials to add a refined touch. 6. **Raleway**: - Characteristics: Elegant and thin, perfect for headers or sub-headings. - Usage: Use sparingly for a modern flair in titles or key highlights. ### Font Pairing Suggestions - **Headings**: Montserrat (bold) with Open Sans (regular) for body text. - **Headings**: Oswald (regular) with Roboto (regular) for body text. - **Stylish Accent**: Use Lora for testimonials with a combination of Montserrat for section titles. ### Tips for Font Hierarchy - Use larg...

I have an Arduino project that has unexpectedly stopped functioning. The program simply quit working without any error messages. It's using a mega board with a PWM board to drive 9 servos. - Ideal Skills: Knowledge and experience with Arduino programming and debugging are essential. - Previous Experience: A portfolio showcasing prior work with Arduino projects will be beneficial. - Additional Skills: Problem-solving skills and patience are highly appreciated. I need a professional who can help troubleshoot and get my project back on track.

I need a skilled developer to enhance my React Native ESP32 IoT app with several important additions and improvements. Key Requirements: 1. Add a widget to the app that displays the next prayer time. 2. Enhance the overall performance of the app. 3. Fix minor bugs, particularly with audio playback and the countdown timer. 4. Implement BLE - esp-idf-provisioning for connecting the app with the device to play audio at scheduled times. 5. Prepare the code for a successful launch on Android and iOS app stores. The highest priority for this project is the BLE - esp-idf-provisioning implementation. Experience with React Native, IoT applications, and BLE connectivity is crucial. A strong understanding of performance enhancement techniques in mobile applications will also be beneficial. ...

I'm looking for an experienced Arduino programmer who can write code for a hydropower turbine. The main function of the code will be to control the turbine speed. Key Requirements: - The Arduino should automatically adjust the turbine speed based on the water flow rate. - Although I currently have no measurements for the water flow rate, the code should be flexible enough to incorporate a flow meter in the future. Ideal Skills and Experience: - Proficiency in Arduino programming is a must. - Prior experience with hydropower turbines will be highly regarded. - Ability to write adaptable code for future sensor integration is essential. - Knowledge of controlling speed based on variable conditions.

I'm seeking an expert in ESP32 microcontroller and MQTT Mosquitto Broker who can help me with a project aimed at remotely controlling appliances over Wi-Fi. Key Requirements: - Design and implement an ESP32 based system for remote control of appliances. - Integrate MQTT Mosquitto Broker for communication management. - Ensure Wi-Fi is utilized as the main communication method. Ideal Skills and Experience: - Proficient in programming and working with ESP32. - Strong understanding and experience with MQTT Mosquitto Broker. - Prior experience with home automation projects would be a plus.

I need to create a library that allows the ESP32-S3 to connect to a computer as an MSC device to access the FAT partition. I found an interesting example on GitHub () that is close to what I need, but the library has some issues: it often fails to mount correctly. I am looking for someone who can fix the problem or create a new library that works as expected.