Stm32 f107 ethernetงาน

Design and develop the hardware for a universal digital display remote, including: Microcontroller selection and integration (e.g., ESP32, STM32, or similar). Circuit design for Bluetooth, Wi-Fi, IR, RF communication modules, and laser activation. Power management to ensure optimal battery life and low power consumption. PCB layout and prototyping to create working hardware components. Integration of sensors for device detection and communication switching. Work closely with the firmware development team to ensure compatibility between hardware and software systems. Test and validate hardware designs, troubleshoot issues, and iterate on improvements. Provide detailed documentation for the hardware design, circuit schematics, and PCB layouts. Support the team in creating a reliable, ...

...S Siemens optiPoint 410/420 Siemens optiPoint WL2 ProfessionalSpectralink 8440 Spectralink 8441 Spectralink 8450 Spectralink 8452 Spectralink 8453 Spectralink 8742 SpectraLink PTB410 Spectralink VoIP Device Grandstream GXP285 Grandstream GXP5017 Grandstream GXP5020 Grandstream GXP5022 Grandstream GXP5024 Grandstream GXP5625 Grandstream GXP7003 Grandstream GXP750 TP-Link TL-SL3218 Dual Gigabit Ethernet Switch TP-Link TL-SL3428 JetStream 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TP-Link TL-SL3452 JetStream 48-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TP-Link TL-SL5428E JetStream 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch TP-Link TL-ST2005 10G Cloud Managed Switch Huawei S5735S-L8P4S-QA2 Huawei S5735S-L8T4S-QA2 Huawei S5735S-S24P4X-A Huawei S5735S-S24...

...equivalent Reference Design and demonstration module available. Deliverables 1. PLECS simulation of AC-DC converter and DC - DC converter 1. Overall system design and modules 2. Schematic of each module in Altium 3. Power module PCB Design (same form factor as ATX) and BOM 4. Controller PCB as daughter board 5. Firmware for the controller (incremental changes from the reference design) 6. CANBus/Ethernet interface 7. Adding 3 phase AC contactor to the reference design 8. Thermal Analysis 9. Load testing All the designs, modules, firmware should be checked in to

I'm seeking a skilled FPGA developer with comprehensive knowledge in Verilog and Ethernet standards. The project involves implementing a 10 Gigabit Ethernet Physical Coding Sublayer/Physical Medium Attachment (PCS/PMA) and Media Access Control (MAC) in an Artix Ultrascale+ FPGA, utilizing SFP+ ports. Key Responsibilities: - Design and implement a Verilog module for basic data transmission via 10GbE. - Ensure compatibility with Artix Ultrascale+ FPGA. - Utilize Vivado for all simulations, testing and final implementation. Ideal Candidates: - Proficient in Verilog and FPGA design, particularly with Artix Ultrascale+ series. - Extensive experience with designing Ethernet PCS/PMA and MAC layers. - Familiar with Vivado and its simulation capabilities. - Able to deliv...

I'm looking for an expert in Operational Technology (OT) integration, specifically with Siemens , Fanuc ,Omron , Delta PLC controllers. The primary focus of this project will be integration and showing all communications with PLC to the common TCP / Ethernet Protocol and integrating same with MES via OPC UA . Use kepware Kepserverex for integration between MES and OT Key Requirements: - Extensive experience with PLC controllers, specifically Siemens S7-1200. OT Security & knowledge of OT Integration - Strong knowledge of OT systems and integration processes. - Ability to troubleshoot and optimize integration for efficiency. - Excellent communication skills for coordinating with our team.

I need assista...Responsibilities: - Debugging the setup code: The code for setting up the system has been identified as problematic. - Fixing bugs: The primary focus will be on identifying and resolving any bugs in the code. - Cleaning up the code: This includes optimizing performance, improving readability and overall tidiness of the code. Ideal Candidate: - Strong experience with STM32G031F6P6 microcontroller and STM32 Cube IDE. - Proficient in debugging and code cleanup. - Previous experience with microcontroller based projects. - Able to work remotely with provided resources (webcam, ST-Link). - Excellent problem-solving skills. Please note: The hardware has been built and tested. A webcam will provide visual feedback and an ST-Link will be connected to the target board for ...

...content data (images, videos, or web URLs). 2. **Displaying Web Content** - The signage player can use a `WebView` to display dynamic or interactive web pages (for instance, a dynamic menu that updates automatically). - Alternatively, you can download videos/images to local storage and render them in a loop. 3. **Internet Connectivity** - Each screen needs either Wi-Fi or Ethernet to connect to your server. - If connectivity is lost, the signage player should keep displaying the last-downloaded content. 4. **Advantages** - Quick to deploy if the screen already has Android built-in. - Easy to update the app via standard Android distribution methods. ### B. Normal Digital Screens (with no built-in OS) 1. **External Media Player** ...

Device Functional Requirements: 1. 10G SFP+ Module Testing: Capability to test 10G SFP+ modules, ensuring full functionality for 10G Ethernet ports with SFP+ 10G Base LR modules. 2. RF Receiver Testing and RF Signal Generation: Three independent RF transmitters capable of generating radio frequencies within the range of 2110–2170 MHz at 20W, with modulation control. 3. Connection and Configuration: Accessible configuration via RS485 communication port. General Specifications: 1. Ports and Interfaces: Three 10G Ethernet ports with physical SFP+ cages for module connection. One RS485 communication port. One MDR 26-pin SCSI Servo Connector (welded plate, female). 2. RF Signal Generators: Three independent RF generators with the following specs: Frequ...

I'm looking for a professional who can modify the existing firmware for mouse movements on an STM32 microcontroller. The exact requirements are listed in the attached document. Please review carefully and start your proposal with the keyword "MOUSE" to prove that you have read this brief properly.

I'm experiencing issues with my Unifi access points as they frequently show as disconnected. I have already attempted to reboot the access points and checked the network cabling, but the problem persists. All of these are powered via Power over Ethernet (PoE). Ideal Skills: - Extensive knowledge of Unifi networking equipment. - Experience in troubleshooting network connectivity issues. - Understanding of Power over Ethernet (PoE) systems. Please reach out if you can assist in resolving this issue.

tengo un arduino uno con shield W5100 y esta en ethernet con su código para mover el servomotor que tiene tengo que entrar pára controlarlo remotamente a una dirección Internet como http;// y deseo entrar por MIT APP INVENT de forma que por medio flechas para girar izquierda ,derecha remotamente el servomotor

I require an experienced Raspberry Pi and OpenWrt specialist to remotely set up my dual ethernet Waveshare CM4 board. - The project involves configuring one system as a basic Raspberry Pi and the other as OpenWrt. - The primary operating system for the Raspberry Pi will be Raspberry Pi OS, while OpenWrt will be set up on the other system. - I want simple Python code to run on the Raspberry Pi OS. An ideal freelancer for this project should be well-versed with Raspberry Pi, dual-setup boards, and Python programming. Prior experience with configuring OpenWrt is highly preferable. The ability to work remotely and deliver quality setup is crucial for the success of this project. I want this to be done today and can give remote access of PC and TV

...Ensure high throughput for cryptographic operations (we are targeting 1B keys/sec performance). Offload ECC computation from the main processing units to Linux Server (with CUDA GPUs), using Ethernet communication to transfer results for further processing. Integrate with GPU for subsequent tasks such as hashing (SHA256, RIPEMD160) and address generation. Skills and Experience Needed: FPGA Development (preferably with Xilinx or Microsemi platforms, like SmartFusion2, Artix-7, or Lattice ECP5). Experience in implementing ECC algorithms in hardware (specifically secp256k1). Familiarity with Ethernet communication in FPGA designs (e.g., 1GbE MAC integration). HDL Coding (Verilog or VHDL) for cryptographic operations. Knowledge of high-performance computing techniques...

I'm seeking a proficient STM32 developer with expertise in Proteus 8. The project involves creating and emulating STM32 code. All specific details will be provided upon discussion.

I'm looking for an expert firmware programmer to help develop firmware for an STM32 embedded project. The main purpose of this firmware is to collect data from a current measurement sensor. The data will be used for real-time monitoring and displayed on an e-paper display. Ideal candidates should have: - Extensive experience with STM32 firmware development - Proficiency in programming for sensor data collection - Knowledge in addressing e-paper display through SPI Your role will involve: - Writing efficient and reliable firmware Schematics for the microprocessor are complete and available. I look forward to your proposals.

I'm in need of a skilled PCB designer who can create a comprehensive PCB design from my provided circuit in a PDF format. The primary goal for this project is product development, so the design should be suitable for that purpose. Key Tasks: - Interpret and translate the provided circuit information into a functional PCB design. - Ensure the design is comp...Demonstration for simulation purposes. Ideal Skills: - Proficient in PCB design software, with experience in Proteus 8. - Understands the intricacies of design for product development. - Capable of creating both SMD and Through-hole designs as needed. Note: The specific types of components or size constraints for the PCB design have not been determined yet, so flexibility and adaptability are key. STM32 Cube IDE expert ...

...USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • eDP video signal + backlight • AIS class B (from other open-source) • Other UART inputs with optocouplers (to be decided) • GPS • GPIO ports accesss via male connector (compatible with Raspberri Pi) These are the main requeriments, maybe other minor will appear during the design. I can provide schemas for all the parts involved (can bus, eDP, AIS,...). The job consist in the design of the board merging all schemas in one, and generate all the files needed by JLCPCB or other manufacturer to produce the board. Ideal skills & experiences: - PCB Design and Raspberry Pi familiarity - Hardware architecture knowled...

...U50's QSFP port to a 10GbE SFP+ router. Required Skills: Strong understanding of FPGA design principles and methodologies. Hands-on experience with AMD Alveo U50 and its networking capabilities. Familiarity with Ethernet MAC IP cores to use on Alveo U50 Knowledge of XRT, Xilinx Vivado Design Suite and Vitis development environment. Experience with network programming and protocols (SFP+, QSFP, Ethernet, TCP/IP). Excellent communication and problem-solving skills. Project Scope: Consult on the selection and configuration of appropriate Ethernet MAC IP cores for 10GbE connectivity to get to the basic "Hello World" working model. Advise on network design considerations (eg. interfacing the U50's QSFP port with an SF...

As discussed, this is the direct hire for the project. I will repost the details once you have accepted the job.

I'm experiencing connection issues with my Triumph ADler CD1242 DC2242 scanner. Despite being connected via an Ethernet cable, the scanner isn't syncing with my computer as it should. Ideal Skills and Experience: - Expertise in troubleshooting scanner connectivity issues - Familiarity with Triumph ADler CD1242 DC2242 models is a plus - Proficient in using Ethernet connections for device setups - Excellent problem-solving skills and attention to detail

...components. All boards you design shall have evluation board quality. It means that they will not actually go into real components and be used for internal purposes only. Ideal Skills: - Extensive experience in PCB and hardware design, including power supply, FTDI, UART, CAN, SPI/QSPI and I2C - Microcontroller and Microprocessor layout experience, especially industry-grade controllers like NXP, STM32, Renesas and Raspberry Pi CM - Knowledge about signal integrity, EMC and good design practices in general Requirements - all parts must be available and recommended on Mouser or Digikey - no China replicas - all design must take place in KiCAD - you will need to hand over all design files necessary for the project, including symbols and footprints - moe License - all design rights...

โปรดลงทะเบียน หรือเข้าสู่ระบบ เพื่อดูรายละเอียด

I'm seeking a skilled PCB designer with experience in IoT devices. The task is to design a compact PCB (4x3cm or smaller) incorporating the STM32 microchip for UART, SIM800L (GSM), and NEO-6M (GPS). The design should also accommodate a buzzer, mini LEDs, and USB-C charging, with provisions for battery integration (details to be finalized). Key Tasks: - Optimize the antenna design for GSM and GPS to ensure the best performance. - Create compact and efficient layouts that can withstand the rigors of a prototype. - Transition existing code from ESP32 to STM32. Key Considerations: - The primary focus of the PCB design is compactness. The smaller the PCB, the better. - The IoT device will be powered by a rechargeable battery, so consideration for this power source is cruci...

I'm looking for an experienced software engineer to develop control software for my RGB LED project using the TLC5955 and STM32F...control software for my RGB LED project using the TLC5955 and STM32F411. I have the PCB ready, and the software needs to be written in stm32CubeIde. Key Responsibilities: - Develop software for individual control of RGB LEDs - Implement features including color changing effects, brightness control, and predefined patterns The ideal candidate for this project should have: - Extensive experience with STM32 programming - Proficiency in using stm32CubeIde - A good understanding of controlling RGB LEDs - Ability to create engaging and smooth color changing effects and brightness adjustments Please note that the software needs to allow individual contr...

I'm seeking an expert in STM32 and SIMA7672S to set up a web server on the SIMA7672S with STM32, accessible via a public static IP address. The server needs to serve static files such as HTML and JSON, while also handling real-time system status updates. Key Responsibilities: - Configure the STM32 to serve static web content and handle real-time system status updates. - Enable the STM32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of STM32 and SIMA7672S. - Proficiency in STMcubeide IDE. - Previous experience in setting up web servers on STM32 based systems. - Familiarity with AT commands and the manual of the SIMA7672S. - Ability to configure for real-time data updates. The ideal ca...

I need to remotely access serial ports over a 4G connection. My actual solution that is working is: REMOTE SIDE, this consists on a battery operated device controlled by 2 UART PORTS (RS232 9600 BAUD 8 byte transparent SERIAL (HARDWARE 2 X serial to Ethernet converter (MOXA 5110), 1 X Openwrt modified router with wireguard tunnel configured, 1 X 4G modem (ALSO INCLUDE 2 NORMAL IPCAMS (CCTV) CONNECTED TO SPARE ETHERNET PORTS OF THE ROUTER) LOCAL SITE , VPN SERVER, this is actually my local home network I used it since it's a stable and accessible network (1 X OrangePi with piVPN and wireguard, 1 fixed internet connection router) CONTROL SIDE, this is consists on the remote control of the device. Its a box with keys that "just" send and receive serial data ove...

I'm seeking an experienced EMV low-level firmware developer for a project involving an STM32 application. The primary purpose of this application is to read Contactless cards using a PN5180 chip. Key Responsibilities: - Develop firmware that supports card reading and authentication. - Implement robust error handling and logging mechanisms. Ideal Skills: - Extensive experience with EMV firmware development. - Proficiency in working with STM32 microcontrollers. - In-depth understanding of PN5180 and its functionalities. - Skills in designing firmware for reading Contactless cards. - Experience with implementing card authentication systems. The PN5180 should be interfaced with an EMV communication interface. Therefore, expertise in this area is essential. Please note, t...

Have you worked with NXP NFC chips. We need write drivers for PN5180 to read EMV data

โปรดลงทะเบียน หรือเข้าสู่ระบบ เพื่อดูรายละเอียด

Create a software library in C that will enable one typical consumer PC--containing typical PC hardware...should not make use of serial-based COM ports to communicate. Communication can be made at the time of bidding for more information related to what a typical consumer PC setup may look like. Some examples of acceptable transport hardware includes ethernet, xHCI-based setups leveraging DbC, xHCI-based setups that create USB transports, and so on. Serial-based COM port communication and DMA-based communication are not applicable solutions. Exceptions may be made for the lattermost means of communication. If certain cables are required, such as ethernet/USB crossover cables for host-to-host communication, an applicable solution requires this equipment is cheap to obtain for ...

Looking for a stm32 + nextion programmer, extensive experience in inkjet printers, if it does not meet the specifications I will not award the project. I already have firmware that I need to integrate more functions and update. Add more functions to the project - ink system controls - level control - control and maintenance - humidity control - ink flow control - lamp control - roll to roll

Overview: I have developed an application for Ubuntu Server 24.10, and I want to distribute it to users as an OVA (Open Virtual Appliance) file. The goal is for users to easily deploy the VM on ESXi or VirtualBox without needing DHCP servers in their datacenter. I need an expert in Ubuntu Server who can create a custom setup wizard for configuring a static IP on an Ethernet interface. The project will involve setting up specific DNS settings as well. Requirements: - When the VM starts for the first time, it should prompt the user to enter network configuration details (IP address, default gateway, DNS) through a setup wizard. - The VM should automatically use these settings for its network configuration, without requiring the user to have access to the VM after deployment. Ideal ...

Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The ...hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2...

After removing an SD-WAN device, my VoIP system is encountering issues. My current setup involves an ATT Modem connected to a Meraki MX100, which serves as the DHCP server, and then to a Cisco SPF350 switch. Here's the situation: - The phones work fine when connected directly to the modem. - My Laptop receive DHCP IPs when connected to the phone via ethernet. - However, the phone fail to get an IP when connected to any port of the switch. I need someone to troubleshoot the current configuration. All other devices in the network are functioning as expected. Ideal skills for this job include: - Extensive knowledge of Meraki MX100 and Cisco SPF350. - Experience with VoIP network issues. - Strong troubleshooting skills. Please provide a detailed plan of action and any simila...

...Experience in projects Tool: Azure DevOps, Process modelling tools • Ability to use analyse and use data using BI Tools (Business Objects, Qlik, Tableau) to underpin solution approaches and benefits realization • Strong knowledge of BSS/OSS Systems and Solutions (Service Activation, Network Discovery & Reconciliation, Inventory, Service Assurance). • Knowledge of standard Telecoms Services (e.g., Ethernet Links, IP Connectivity). • Experience in OSS & Network Orchestration and Activation domain. • Understanding of API Design Requirements Capture. • Familiarity with product, service, network, and device models.(Highly desirable) • Proven track record of successful process or business improvement work, ideally in telecoms. • A...

I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on this project. Proposals generated by ...

We are looking for an experienced Firmware developer and Electronics Engineer (EE). You will continue the development of an STM32 design and a seperate ESP32 design - both with BLE. Also you will continue the electronics design of the board, simulate the circuits and layout a PCB, while communicating with clients, vendors and the team. You will be working for a small StartUp and directly report the the CEO, who is also an EE. We are looking long-term to acquire a Senior EE for a permanent role in the team. We run the company fully remote, online and have staff located globally. So you can locate yourself as you see fit. We are demanding as we do require high quality work, there is no place for an EE that cannot or will not do the detailed work and limit the number of mistakes...

I'm in need of an experienced professional who can assist me in setting up communication between my Omron CJ2M PLC and a Yaskawa VFD via Ethernet/IP. Key tasks include: - Configuring the PLC to establish successful communication with the VFD - Ensuring the setup adheres to Ethernet/IP protocol standards - making the PLC control speed of the motor Ideal skills for this project: - Proficient in PLC programming, specifically with Omron CJ2M series - Extensive experience with Ethernet/IP communication setup - Prior experience with Yaskawa VFDs - Troubleshooting skills to resolve any potential communication errors

...passive monitoring using the PIR sensors. Key Features of the System: Energy Management: Solar panels (10-20W) with MPPT controller. Three 12V, 10Ah LiFePO4 batteries with automatic rotation to maximize lifespan. Voltage regulators to power components at 5V and 3.3V. Motion Detection and Processing: PIR sensors to trigger system activation. OV2640 cameras controlled by microcontrollers (ESP32 or STM32) and managed using MOSFETs. AI Processing: Coral Dev Board Micro for real-time inferences. Communication Modules: Wi-Fi (ESP32), LoRaWAN (Heltec LoRa), or 4G/LTE (SIM7600), selectable based on site requirements. System Monitoring and Management: Secondary microcontroller for managing energy, environmental sensors (temperature and humidity), and communication modules. Freelance...

I am looking for an electronic engineer who can work in our team. We have a project to design a switch panel using STM32. I will share the PCB layout and switch links in a quick chat. I want to design the PCB using EasyEDA because I will manufacture PCB in China. Please attach your portfolio if you have any experience in this field. I am looking for a individual engineer who can join our team. Thank you

...tracking for an automated welding setup. The freelancer will be responsible for interfacing both the sensor and RealSense camera with the robot, setting up communication, and writing the necessary programs to control robot motion based on real-time displacement and vision data. Responsibilities: 1. Sensor Integration: • Connect a displacement sensor (e.g., Panasonic HG-C1200) to the PC using Ethernet/IP, RS232, or another suitable communication protocol. • Integrate the Intel RealSense camera with the PC to capture real-time 3D vision data for seam tracking. • Process sensor data (e.g., displacement values and 3D vision data from RealSense) on the PC, including filtering, scaling, and noise reduction. • Set up communication between the PC and FANUC robot...

wir möchten gerne eine Steuerung für eine Dosiertechnik programmieren lassen auf Basis STM32 in C und/oder C++

I am in need of a skilled engineer to create a BLDC speed controller and an STM32-based flight controller based on existing software and reference designs where applicable. Key responsibilities include: - Designing a flight controller based on a pre-provided Reference Design for Rotorflight firmware - Developing a 2-in-1 BLDC speed controller based on ESCape32 firmware Ideal candidates should have: - Prior experience with flight controller hardware for Betaflight/iNAV/Cleanflight/Rotorflight/etc - Prior experience with BLDC speed controller hardware for BLHeli/BLHeli32/AM32/ESCape32/etc - Ability to compact designs into predetermined PCB shape/size requirements Please provide examples of similar projects you have worked on in your application. The details of the project requirem...

I need maintenance on my internet cables. I have Ethernet points in my house, but they need to be upgraded to accommodate my new 900mb service. Ideal skills and experience for the job include: - Proficiency in residential network cable maintenance - Knowledge of internet speed requirements - Experience with Ethernet point upgrades - Troubleshooting skills for potential connectivity issues - Ability to work meticulously and maintain high standards of workmanship.

I need a professional to help me configure Zabbix for monitoring bandwidth usage on my Windows PC, specifically over the Ethernet interface. Ideal Skills and Experience: - Proficient in Zabbix setup and configuration - Experienced with Windows operating systems - Knowledgeable in network monitoring and bandwidth analysis Please note, I have already downloaded Zabbix, so the task is purely configuration focused.

...location, with work opportunities on both weekdays and weekends. Key Responsibilities Provide on-site technical support for desktops, hardware installations, and replacements (e.g., hard drives, servers, and racks). Offer console access for networking equipment such as Routers, Switches, and Firewalls to assist remote support teams. Troubleshoot and resolve networking issues, including wireless LAN, Ethernet configuration, and IP addressing. Perform system administration tasks, manage incidents/changes, and support applications on Windows platforms. Conduct basic network troubleshooting, including DHCP, DNS, and subnetting. Base Skill Set Required Proficiency in desktop/system administration, customer service, and technical troubleshooting. Hands-on experience with operating syst...

Hi Diogo; I will need for you to assist us again, this time we will be editing three tutorial videos as we have done in the past. I have provided three videos and three voice overs in the shared drop box folder. -Tutorial Video for Mac OS USB -Tutorial Video for Windows USB -Tutorial Video for Windows Ethernet/LAN

I am looking for a skilled electrician to assist with the installation of a new network infrastructure in a commercial building. The task will involve: - Fixing Cat6 cable that is wearing through PVC - Setting up a Network rack - Terminate Ethernet cables in wall jacks and patch panels - Installing and labeling patch panels for network organization - Testing all connections to ensure proper functionality - Installing cable management systems in the network rack - Setting up and configuring network switches - Labeling all network cables for easy identification - Installing and configuring WiFi access points I already have the necessary components for this project, including Cat6 cables, PVC conduits, and a Network rack. The primary goal of this installation is to set up a completel...

I'm seeking an experienced engineer to develop a device capable of reading the NMEA2000 protocol for marine navigation purposes. Key Requirements: - The device should be able to read depth soundings, compass headings, and engine fuel levels. - The device will interface via a wired connection, such as USB or Ethernet. - Experience with marine technology and NMEA2000 protocol is a must. - Proficiency in designing and developing robust, waterproof devices is a plus. Please include relevant examples of your previous work in your proposal.

After my Windows 11 updates, I need a program that presets specific network settings for my Ethernet LAN. This includes IP address configuration, DNS configuration, and default gateway settings, along with any other related settings. Ideal skills and experience for this job: - Proficient in Windows OS and its settings - Programming skills to develop the required software - Experience with networking, specifically Ethernet LAN settings - Ability to understand and implement DNS and IP configurations - Experience with accessing and modifying Windows Registry settings The program should include a user interface with simple controls for ease of use. Include firewall settings configurations for the Ethernet LAN. The program should feature a command line interface for ease...