Stainless Steel Hot Water Tank Design

Description: I am looking for a certified engineer to assist with a project involving the design and construction of a stainless steel tank for 95 degree Celsius hot water. Sealed and insulated Below are the specifications and requirements: Example of existing tank 1. Project Specifications: - Type: Internal water tank (See attached Fig. A) - Dimensions: 6000 mm (L) x 1500 mm (W) x 1700 mm (H) - Contents: Hot water at 95°C =/- 0,1 degr, differences on all water levels. - Estimated Weight: [Include the weight of the tank when filled with water] - Insulation Requirement: Must maintain a temperature containment of +/- 0.1°C - Material: Stainless Steel 304 (SS304) - Cover Design: Two horizontal sliding semi-covers, each measuring 1500 mm. The central 1/4 covers will slide on top of the last two 1/4 covers. - Actuation: Movement will be actuated by pneumatic cylinders. - Water Circulation: Series of 3-inch threaded holes for water circulation located at the two lower ends. - Safety Assurance: The entire structure must be designed with engineering calculations to ensure maximum construction safety, following [insert relevant design codes/standards]. - Temperature Control: Insulation must maintain maximum external surface temperatures of 25-28°C. 2. Project Deliverables: - Comprehensive Engineering Design and Calculations - Finite Element Method (FEM) Analysis - Digital Analysis for Temperature Containment - 3D Executive Drawings - Detailed 3D models of the stainless steel tank, including internal and external features, insulation design details, and the two horizontal sliding semi-covers. - 2D Executive Drawings - Front, side, and top views of the tank. - Detail drawings for the sliding cover mechanism. - Cross-sectional views showing insulation placement and material specifications. - Necessary construction details that will aid in the fabrication process. - Constructive Specifications - Materials to be used (specifically SS304), thickness of the tank walls and insulation, welding and assembly instructions, and safety factors considered in the design. 3. Additional Information: 27. Pressure Rating: The tank should handle internal pressures up to [specify pressure in bar/psi]. If there are any assumptions made during the design process or if further information is needed to complete these drawings, please let me know, and I will provide the necessary details promptly. - Project must be signed off by a certified engineer with national habilitation. 4. Timeline: Project completion is required within 12 to 18 days. Propose the milestones. 5. Offer: [Enter your offer range here] Please feel free to reach out if you need further details or clarifications. I look forward to your proposals! Thank you! Provide comprehensive insulation design details, including specific materials, thickness, and placement considerations. no pressure