Non-Lethal Electric Ray Wand Development
€8-1500 EUR
S-au achitat serviciile după ce au fost prestate
Project Description: Non-Lethal Electric Ray Wand for LDS
Project Objective: We aim to develop a non-lethal electric ray wand for the LDS organization, capable of emitting a visible electric ray (plasma arc) that can deliver controlled electric shocks or minor burns, without causing permanent or life-threatening damage. The wand will be used as a tactical defense tool and must include multiple safety measures to ensure controlled, ethical use.
The key is to create a device that delivers an electric ray powerful enough to incapacitate or deter, while keeping the voltage and current low enough to prevent serious harm.
Technical Specifications for the Electric Ray Wand
1. High Voltage Power Supply (Electric Arc Generator):
Component: High-voltage arc generator (12V or higher).
Purpose: To generate a visible electric arc between two electrodes that can produce a controlled electric shock. The electric ray will have a plasma-like appearance, capable of delivering minor burns or shocks.
Specifications:
12V electric arc generator with low current output (less than 10 mA) to ensure non-lethal performance.
Estimated Price:
USD: $35 - $85
EUR: €30 - €75
GBP: £25 - £65
Where to Buy: AliExpress, Amazon, eBay.
2. Tungsten or Copper Electrodes:
Component: Tungsten or copper electrodes.
Purpose: These electrodes will conduct the electrical discharge and direct the plasma arc towards the target. Tungsten is ideal due to its heat resistance.
Specifications:
Tungsten electrodes or copper alternatives, resistant to high temperatures.
Estimated Price:
USD: $6 - $18 (for a set of electrodes).
EUR: €5 - €16
GBP: £4 - £14
Where to Buy: AliExpress, eBay, Electronic supply stores.
3. High-Capacity Capacitor:
Component: High-capacity capacitor (470 uF or higher, 400V).
Purpose: Stores the energy that will be discharged through the electrodes, generating the electric arc. The capacitor will control how much energy is released to ensure the shock is not lethal.
Specifications:
Capacitor that can safely release controlled bursts of electricity to generate the electric ray.
Estimated Price:
USD: $12 - $22
EUR: €10 - €20
GBP: £8 - £18
Where to Buy: Mouser Electronics, Digi-Key, RS Components.
4. Rechargeable High-Voltage Battery:
Component: Rechargeable high-voltage battery, such as a 12V lithium-ion battery.
Purpose: To power the electric arc generator and ensure enough voltage for continuous operation. It should be compact to maintain the wand’s portability.
Specifications:
12V lithium-ion battery (Panasonic NCR18650B or similar, 3.7V, 3400mAh) with high capacity.
Estimated Price:
USD: $15 - $25
EUR: €13 - €22
GBP: £10 - £20
Where to Buy: AliExpress, Amazon, eBay.
5. Voltage Controller:
Component: Adjustable voltage controller.
Purpose: To regulate the voltage output, ensuring the electric ray delivers controlled shocks without exceeding a safe level. The controller will limit the current to below 10 mA to ensure non-lethal performance.
Specifications:
Adjustable voltage controller to fine-tune the strength of the electric ray.
Estimated Price:
USD: $25 - $55
EUR: €22 - €50
GBP: £18 - £45
Where to Buy: Mouser Electronics, AliExpress, eBay.
6. Safety System (Safety Switch and Proximity Sensor):
Component: Safety switch and proximity sensor.
Purpose: To prevent accidental activation of the wand. The safety switch ensures the wand is only active when intended, and the proximity sensor ensures the electric ray is not fired too close to the user or other objects.
Specifications:
Safety switch to prevent accidental activation and a proximity sensor to detect safe firing distance.
Estimated Price:
USD: $12 - $20
EUR: €10 - €18
GBP: £8 - £16
Where to Buy: Amazon, AliExpress, eBay.
7. Heat Dissipation System:
Component: Aluminum heat sink or mini cooling fan.
Purpose: The electric arc generator and capacitor will produce heat during operation. A heat sink or small fan will dissipate excess heat, preventing the wand from overheating.
Specifications:
Aluminum heat sink or cooling fan to maintain safe operating temperature.
Estimated Price:
USD: $7 - $15
EUR: €6 - €13
GBP: £5 - £12
Where to Buy: AliExpress, Amazon, eBay.
8. Wand Casing (Heat-Resistant Material):
Component: Heat-resistant wand casing, made of aluminum or carbon fiber.
Purpose: The casing must protect the internal components from external damage and ensure the wand remains cool to the touch. Materials like aluminum or carbon fiber are recommended for their durability and heat resistance.
Specifications:
Durable, lightweight material such as aluminum or carbon fiber.
Estimated Price:
USD: $25 - $50
EUR: €22 - €45
GBP: £18 - £40
Where to Buy: AliExpress, eBay, Engineering supply stores.
Functionality and Design Features:
Visible Electric Ray:
The electric arc generator will produce a visible ray between the electrodes, creating a plasma-like discharge that resembles an energy beam.
Non-Lethal Electric Shock:
The ray will deliver a controlled electric shock designed to incapacitate or deter an individual without causing serious harm. The current will be limited to under 10 mA, making it non-lethal but capable of delivering minor burns or shock sensations.
Timed Discharge:
The wand will be designed to limit the duration of the electric ray to 1-2 seconds per activation, ensuring the user has control over the shock’s intensity and duration. This will help prevent over-exposure and minimize the risk of burns.
Heat Management:
The wand will include heat dissipation features such as an aluminum heat sink or a cooling fan to manage any excess heat generated by the arc generator and capacitor.
Safety Controls:
A safety switch and proximity sensor will prevent accidental discharge and ensure that the wand only activates when the target is at a safe distance.
Indicator Lights:
LED indicators will show the operational status of the wand, with green for ready and red for warning or overload.
Total Estimated Cost of Components (in USD, EUR, and GBP):
Electric arc generator (12V):
USD: $35 - $85
EUR: €30 - €75
GBP: £25 - £65
Tungsten or copper electrodes:
USD: $6 - $18
EUR: €5 - €16
GBP: £4 - £14
High-capacity capacitor (470uF, 400V):
USD: $12 - $22
EUR: €10 - €20
GBP: £8 - £18
Rechargeable battery (12V lithium-ion):
USD: $15 - $25
EUR: €13 - €22
GBP: £10 - £20
Voltage controller:
USD: $25 - $55
EUR: €22 - €50
GBP: £18 - £45
Safety system (switch and proximity sensor):
USD: $12 - $20
EUR: €10 - €18
GBP: £8 - £16
Heat sink or cooling fan:
USD: $7 - $15
EUR: €6 - €13
GBP: £5 - £12
Heat-resistant wand casing:
USD: $25 - $50
EUR: €22 - €45
GBP: £18 - £40
Final Notes: This electric ray wand must be designed with safety as the top priority. The non-lethal electric discharge should be powerful enough to deter or incapacitate a target, but without causing permanent harm. The shock intensity must be carefully regulated to ensure that it does not exceed safe limits.
If you have any additional questions or require more specific information on any components or functionalities, feel free to ask! Remember that it is a fully functional and real object
ID Proiect: #38704426
Detalii despre proiect
18 freelanceri plasează o ofertă medie de 910€ pentru proiect
With over 7 years of experience in ZAWN Tech, I am wellequipped to tackle the challenge posed by your Non-Lethal Electric Ray Wand project. Although my background primarily lies in the IT field, my expansive knowledge Mai multe
Hello, good time Hope you are doing well I'm expert in MATLAB/Simulink, Python, HTML5, CSS3, Java, JavaScript and C/C#/C++ programming and by strong mathematical and statistical background, have good flexibility for s Mai multe
Hi, how are you doing? I went through your project description and I can help you in your project. We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regul Mai multe
Best Expert in Non-Lethal Electric Ray Wand Development! ⭐⭐⭐⭐⭐ Hi Diego, You’re looking for an expert to develop a non-lethal electric ray wand for the LDS organization. With over 10 years of experience in electronic Mai multe
Non-Lethal Electric Ray Wand Development? Say Less—I've Got You Covered! Hi Diego, I saw your project for developing a non-lethal electric ray wand for the LDS organization, and let me tell you—this is right up my all Mai multe
Dear Diego, I hope this proposal finds you well. I have carefully reviewed the detailed project description for the development of the Non-Lethal Electric Ray Wand for the LDS organization. The project objective to cr Mai multe
Drawing on my extensive background in Electrical Engineering and Electronic Design, I am the ideal candidate to develop this Non-Lethal Electric Ray Wand for the LDS organization. My skill set includes power system kno Mai multe
With years of experience in electrical engineering, I am well-suited to design and develop the Non-Lethal Electric Ray Wand for your organization. I have a deep understanding of high-voltage power supplies, capacitors, Mai multe
As a seasoned electrical engineer with extensive experience in the development of various electronic devices, I believe I am the ideal candidate to carry out this project. My proficiency in circuit design and voltage c Mai multe
As a dedicated data maestro with an added twist of engineering expertise, I believe I'm the ideal candidate to bring your vision of a non-lethal electric ray wand for LDS into reality. Merging my decade-long experience Mai multe
With 20+ years of experience as a Web Developer and Resources Planning background I bring comprehensive engineering knowledge which will be critical to the success of the Non-Lethal Electric Ray Wand project. My expert Mai multe
Dear Diego, I am Avi Gupta, an expert in electronic design with over 10 years of experience in creating innovative and safe electronic solutions. I am excited about the opportunity to assist you in developing the non- Mai multe
