Crossflow blower cfd simulationproiecte
...in mind, we would be wise to expect the BoJ to raise rates eventually in a bid to shore up USD/JPY or at least prevent further rises. Trade forex and more CFDs with Libertex As a CFD broker with decades of experience connecting ordinary traders and investors with the financial markets, Libertex gives the opportunity to trade CFDs on a wide range of covered asset classes — from stocks, commodities and ETFs through to options, crypto and, of course, traditional currencies — Libertex offers both long and short CFD positions in a variety of underlying assets. For instance, Libertex can offer competitive leveraged CFD trading in forex pairs such as USD/JPY and EUR/JPY, as well as more exotic crosses like NOK/JPY and SGD/JPY. Experience...
This paper aims to evaluate the performance obtained by the V-BLAST detection algorithm in MIMO (Multiple-Input Multiple-Output) systems. The simulations will be performed by writing lines of code in the Matlab simulation environment. Consider a MIMO system in a configuration with 2 transmitting antennas and 2 receiving antennas (2x2) MIMO) when a random string of bits will be transmitted, with and without the V-BLAST detection algorithm implemented. The performance of the proposed system will be tested through scenarios in which the number of active users at a given time in the network will vary, different modulation techniques will be used (BPSK, QPSK) when the channel is affected by different types of fading (Rayleigh, Rice ) and Code Division Multiple Access (CDMA) using real sp...
Doresc simularea miscarii unui ansamblu si determinarea anumitor forte
Analiza de risc a unui sistem mecanic folsind programul HiP-HOPS (cu interfata Simulink sau Simulation X) / Isograph / APIS IQ-RM PRO / altele, pentru obtinerea de Arbori de riscuri / defectiuni si structuri FMEA
3D Design Architecture, Animation, Simulation
3D Design Architecture, Animation, Simulation
I'm in need of a professional with experience in robotics. The job includes assembling a service robot and its mechanisms, simulating this robot in an outdoor environment, and conducting a basic analysis of its structure and mechanisms. Ideal Skills: - Robotics assembly - Simulation software proficiency - Basic structural and mechanical analysis Please take into consideration that this is a service robot that needs to be tested and analyzed as if it were operating in a real-world outdoor scenario.
I'm looking for a Unity expert to set up a quick project for me using an STL scene. The setup should be targeting PC, as it's primarily for an interactive simulation. Key requirements for this project include: - Basic navigation controls (pan, zoom, rotate) - Ability to select and highlight objects - Integration of measurement tools - Implement basic collision detection to prevent objects from overlapping. - Configure realistic lighting to enhance the visual quality of the simulation. - Create a simple user interface for tool selection and settings adjustment. - Enable saving and loading of simulation states for continued work. - Add optional support for VR headsets to enhance interactivity. - Add a multi-user logins on the scene The ideal freelancer for th...
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.
I'm looking for a MATLAB expert to help me simulate a robotic arm with 13 joints. This project involves using a DC control circuit and a polynomial trajectory block. The goal is to configure the polynomial trajectory block so that the arm performs linear movements in a logical and consistent manner. Key Requirements: - Simulate basic motion with visible joints - Implement basic feedback control mechanisms Ideal Skills and Experience: - Proficiency in MATLAB - Experience with robotic simulations - Understanding of DC control circuits - Familiarity with polynomial trajectory blocks - Ability to configure simulations for specific movement patterns.
I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concepts simply will be key to our success.
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd
I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentially develop them for specific applications
...WhatsApp-approved templates: • Template Creation: • Header: Text, image, or document. • Message body with support for dynamic variables (e.g., {name}). • Footer: Optional. • Interactive buttons: • Quick replies. • External links. • Upload and Edit: • Allow the upload of pre-approved templates from the business account. • Limited editing of templates pending approval. • Preview: • Real-time simulation of the template layout. • Template Status: • Display approval status: Pending, Approved, or Rejected. 2. Automated Messaging (Using Templates) • Implement a system to send messages based on approved templates: • Dynamic Parameters: • Integrate CRM fields to personalize messages auto...
I need a skilled professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechanical en...
I need a skilled professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and Simulink - A strong background in robotics and mechanical en...
I need a basic cross-platform application like the one available on Google Play but with simplified features and a minimalist design. It should support the Dji controller RC-N1 and be compatible with both Android and iOS. Key Requirements: - A single, simple scene design - Three flying modes: cine, normal, sport - Option to toggle random wind simulation on/off - Option to toggle grid line on/off - Basic controls: Arm / Take Off / Flying
...dargestellt, intern jedoch dynamisch organisiert. Automatische Freischaltung nach Firmenprüfung (z. B. Handelsregister, Domainvalidierung). Zusätzliche Module können als Add-Ons verkauft werden. 9. Demo-Modul Anforderungen: Vollständige Vorschau des Systems mit simulierten Daten. Alle wichtigen Funktionen wie Berichte, Filter und das Dashboard werden demonstriert. Option für Test-Uploads zur Simulation realer Workflows. 10. Benutzerverwaltung Anforderungen: Nutzung der WooCommerce-Benutzerverwaltung mit rollenbasierten Berechtigungen (Admin, Kunde). Verknüpfung von gekauften Modulen mit Benutzerrollen und Freischaltungen. 11. Reporting-Modul Anforderungen: Standardisierte Berichte pro Branche. Individuelle Konfiguration und automatisch...
I am seeking a skilled professional with experience in Computational Fluid Dynamics (CFD) modeling and simulation, particularly for a Francis turbine. The primary objective of this project is to assess the performance of the turbine. Key Responsibilities: - Conduct CFD modeling and simulation to evaluate the performance of the Francis turbine. - Identify possible enhancements to the turbine's efficiency, structural integrity, and vibration reduction capabilities. Requirements: - Proficiency in CFD software and simulation tools. - Prior experience with Francis turbines is highly advantageous. - Ability to deliver a moderate level of detail in the simulation results. If you can help me maximize the performance of my turbine, please ge...
I am in need of a professional writer with a strong background in Science and Technology, specifically in crafting theses centered around experimental, simulation-based research. Key Requirements: - Expertise in writing academic research papers, particularly theses - Strong background in Science and Technology - Experience in simulation-based experimental research - Ability to convey complex ideas in an engaging and understandable manner Your role will involve crafting a comprehensive and well-structured thesis that is reflective of high academic standards and ready for submission.
Halal Meat Supply Chain Simulation
...original AI-generated theme, with clean, visually appealing designs. Tool and Object Requirements: Redraw and enhance all tools to make them recognizable as AI did a poor job. Tools and objects must match the overall theme and integrate into the design. Placement and Required Tools: Belt: Hammer Drill Automotive impact gun Paintbrush Screwdriver Wrench Around His Neck: Camera On His Back: Leaf blower Pruning shears Rake On the Ground Beside Him: Mig welder with a welding helmet resting on top Lawn mower Floor jack On a Desk Beside Him: Laptop Smartphone Wearing on His Head: Tech support Headset Welding helmet flipped up Layering and Editing: Each tool and object must be on its own layer for editing and repositioning. All components should be individually exportable as se...
...create a 3D simulation of an immersive pod for training purposes. We aim to create a **visual simulation of an immersive pod** that provides users with a calming and engaging environment tailored to their preferences. The pod is designed to be a self-contained space for activities such as **meditation, relaxation, education, or entertainment**. This initial phase focuses on building a **3D on-screen simulation** to visually demonstrate the pod's **design, structure, and basic features**, laying the groundwork for future development. Ideal candidates should have: - Extensive experience in 3D simulation development - Proficiency in one or more of the following software: Unity, Unreal Engine, Blender - Ability to design engaging and effective training sce...
This UDF (User Defined Function) is designed to model the transpiration phenomena of tomato plants in a simulated environment using ANSYS Fluent. The UDF calculates thermal and moisture exchanges based on environmental parameters such as ambient temperature and relative humidity, considering the plants as porous parallelepiped bl...ensure proper integration into the model. Additionally, they will need to add the necessary commands to enable the code to run in parallel, utilizing 8 processors. Currently, my UDF works only in serial mode (with a single processor). Once the correction is made, the contractor will provide me with the corrected UDF code, ready to be used in parallel. They will also assist me in setting up the simulation and ensure everything works properly with the para...
I'm looking for an expert in ANSYS Fluent and fluid dynamics analysis to perform a PCM heat sink analysis. Key requirements: - Proficient in ANSYS software with a focus on Fluent - Extensive experience in fluid dynamics analysis - Familiarity with PCM heat sink technology - Capable of providing detailed CFD simulations and flow modelling Your expertise will help assess the thermal performance and efficiency of the PCM heat sink under various conditions.
...considerations for the termination process to ensure users are fully informed. • Penalty Information Display: Calculate and present any fees or interest reductions that will apply upon early termination. • Collecting Termination Reasons: Use surveys to gather users’ reasons for termination, providing valuable insights for service improvements. • Interest Calculation Tool: Equip users with a simulation tool that calculates potential interest earnings based on inputted deposit amounts and periods. This feature assists users in selecting the most suitable deposit plan by including: • Input Fields: Allow users to input or select variables such as deposit amount, period, and interest rate. • Calculation Results Display: Show real-time calculations o...
I need a digital circuit designed that will sequentially display the number "210707069" on a seven-segment display. The design should be built using a 555...design should be built using a 555 timer-based oscillator, JK flip-flops (7476 IC), and a BCD (Binary-Coded Decimal) encoding system. The circuit should continuously loop the number, correctly displaying it in sequence. Key requirements: - Use of 4-6 bit BCD encoding for each digit. - Simulation using Proteus software. - Deliver a fully functional circuit and a detailed report at the end. Primary focus: Accurate number display on the seven-segment display using Proteus. The circuit's simplicity and the simulation setup's ease are secondary considerations. The final report should provide a detailed a...
Project Description: We are looking for an experienced CFD freelancer to work on a buffer tank simulation project. This task is designed to gauge your capabilities in solving complex mixing and heat transfer problems. If successful, we have additional buffer tank projects and a pipeline of CFD work in the future. Objective: The goal is to analyze the tank's performance and propose effective internal design modifications to achieve strict compliance with the following requirements: Compliance: The outlet temperature must meet 14°C ± 1°C at 240 seconds. Tank Parameters: Adiabatic conditions: The tank is thermally insulated, with no heat gain or loss. Dimensions: Tank diameter 3100mm, height 6100mm. Pipe Orientation: Current inlet and outlet pipe ori...
We are seeking assistance from an experienced freelancer who has worked on executing AI models on Xilinx-based FPGAs through TVM. Th...guidance on adjusting compatible versions beyond the official documentation. If incorrect, we require assistance in identifying the root cause and resolving it. 3. DPU Virtual Implementation and Simulation When using VTA in the past, we could verify functionality through the VTA simulator () . We need to know if a similar simulation method exists for the DPU in Vitis AI. Specifically, we are looking for an example to simulate the relay model on a virtual DPU to validate functionality and obtain test vectors. The simulation must confirm proper operation on the Ultra96v2 board.
Title: Visual Simulation of an Immersive Pod Concept We aim to create a **visual simulation of an immersive pod** that provides users with a calming and engaging environment tailored to their preferences. The pod is designed to be a self-contained space for activities such as **meditation, relaxation, education, or entertainment**. This initial phase focuses on building a **3D on-screen simulation** to visually demonstrate the pod's **design, structure, and basic features**, laying the groundwork for future development. #### Context on the Idea: The immersive pod is a futuristic concept aimed at creating a personal retreat for users, offering a multisensory experience to enhance their mental focus, relaxation, or learning. The pod will feature **customizable...
I need a simulation expert to help model various scenarios within the halal meat supply chain using Anylogic. The focus will be on the slaughtering and processing phases, specifically: - The Halal Certification Process: Understanding how this impacts the overall supply chain and identifying potential bottlenecks or areas for improvement. - Processing Time and Efficiency: Assessing current processing times and evaluating the efficiency of our systems. The goal is to gain insights into the supply chain's logistical challenges and to pinpoint opportunities for optimization. Proficiency in Anylogic is a must, as is a good understanding of food supply chains, particularly in relation to halal meat. Previous experience with supply chain simulations will be highly beneficial.
...Description: I am looking for a skilled web developer with experience in building applications using Twilio APIs to create an educational simulation tool. The project involves developing a web-based interface for controlled, ethical demonstrations of social engineering techniques, particularly focusing on OTP (One-Time Password) interception scenarios. The tool will strictly be used for educational purposes within a controlled environment and with explicit consent. Responsibilities: Integrate Twilio’s SMS and Voice APIs to send and receive messages. Configure webhooks to capture SMS replies for OTP parsing and logging. Develop a user-friendly web interface to manage simulation workflows: Trigger OTP requests. Send spoofed messages mimicking trusted entities. Display...
I'm seeking an experienced professional to assist with the installation of pressure sensors on gloves. These sensors will be used to measure the forces applied on an airplane yoke during training and simulation sessions. Needed in Ireland Key Details: - Sensor Type: Pressure sensors - Installation Location: Fingers of the gloves - Data Usage: Forces measured will be used for training and simulation Ideal Skills and Experience: - Expertise in sensor installation and calibration - Experience with training and simulation equipment - Knowledge of pressure sensors and their application - Ability to ensure durability and functionality of sensors under various conditions
I'm seeking a professional to conduct a discrete element simulation in LIGGGHTS primarily aimed at analyzing the behavior of particles under the external force. Necessary files and extension will be avoided to help the freelancers. The freelancer will have to replicate results from a published paper. The ideal freelancer for this project should have a strong background and experience with discrete element simulations. Proficiency in simulating metal behaviors specifically is highly desirable.
To help in developing a custom Battery Management System (BMS) for electric vehicles, adhering to IEEE P2686 standards. The project involves advanced modeling, simulation, and report preparation, requiring a deep understanding of battery systems, MATLAB/Simulink, and automotive standards.
I am looking for a skilled ROS developer with a strong background in control systems engineering to design and implement advanced local planner obstacle avoidance algorithms on a TurtleBot3 in the Gazebo simulation environment. Key Deliverables: - Fully documented Python source code with clear and detailed comments - Launch files for efficient setup and testing - A comprehensive report explaining the equations, controller design, and algorithm details
...System to log and monitor job application statuses. Chrome browser extension to save job listings directly from career websites. Automatic notifications for deadlines or changes in application status. • Cover Letter Generator with AI: Generate personalized cover letters based on resumes and job descriptions. Built-in editor for manual adjustments. Export in PDF and Word formats. • Interview Simulation with AI: Generate tailored interview questions based on job descriptions. Provide feedback on user responses (text or audio) with suggestions for improvement. Generate detailed reports with actionable tips for future interviews. • LinkedIn Profile Optimization: Analyze LinkedIn profiles and suggest improvements for titles, summaries, and skills. Provide a report hi...
I'm currently pursuing a PhD in engineering, and I need an expert in AI modeling to help me develop a stochastic simulation model for my research. This model is crucial for the simulation study aspect of my project. Ideal skills and experience: - Proficiency in AI and simulation modeling. - Extensive knowledge and experience in stochastic models. - Background or strong understanding of nanoelectromechanical engineering. - Excellent data analysis and prediction skills. - Ability to deliver on time and work independently.
The ResQMedic system is a platform specifically developed for the simulation of fire and rescue service operations in online role-playing games. Its goal is to enable a realistic flow of operations while simultaneously ensuring efficient communication, documentation, and management. The system integrates various modules, including a central app called ResQProtocol, which is essential for operation documentation. This is complemented by a variety of functions and tools that serve both administrative and operational purposes. Thanks to its flexible architecture, ResQMedic is easily adaptable to individual needs and provides a comprehensive solution for all aspects of operation management and execution. Core Features of ResQMedic 1. Modular Design: ResQMedic consists of three main mo...
...simulator should focus on cars and include driving through city streets and highways for the Meta Quest 2. I’ve already built some of core mechanics. Key Requirements: - Hand Tracking: The player will use hand gestures for full control of the vehicle. - Developed using Unity to ensure high-quality performance and immersive experience. - Experience in developing VR applications - Proficient in vehicle simulation and physics - Ability to design engaging and realistic environments - Understanding of user interaction in VR Your creative input in making the simulator enjoyable while maintaining a realistic driving experience will be highly valued....
I'm seeking a Supply Chain Management expert who is proficient in Arena Simulation and process mapping. The goal is to enhance our operations in inventory management, logistics and transportation, and production scheduling. Key Areas of Focus: - Improving our inventory management system - Streamlining logistics and transportation processes - Optimizing production scheduling Current Tools: - We primarily use Arena simulation and Power BI for our supply chain management. Arena Simulation Assistance: - I need help with model building, data analysis, and process optimization in Arena Simulation. Ideal Skills: - Extensive experience in supply chain management - Proficiency in Arena Simulation - Skilled in model building, data analysis, and process opt...
I need to design the supercapacitor block in matlab simulation with any supercapacitor data sheet .. Already supercapacitor block is Available. I just need to assign the parameters of the block with data sheet
I'm looking for a talented game designer to bring to life my game concept 'Royaumes & Conquêtes'. This title is a grand strategy, city management, action RPG and simulation game aimed at PC and console. Game Overview: Players choose a class that affects their journey: Vagabond (survival), Soldier (combat), Noble (politics), or Leader (empire management). The AI adapts to player decisions in real-time, creating dynamic challenges. Key Gameplay Elements: - Combat: From broad strategic planning (like Total War) to immersive action (inspired by Bannerlord). - Management: From local survival (Vagabond) to empire oversight (Leader). - Progression: Players can either lead battles directly or oversee from a strategy view, based on chosen version (Standard, Premium...
...Modeler 14.5 (Educational Version) o Programming in C 2. Tasks: o Include the "OL" (Oxygen Level) variable in the RREP message. o Debug existing code for errors related to passing sensor metrics in the DSR protocol. o Ensure the final step displays a list of IPs with their sensor data when the destination sends RREP to the source. o Document every action taken, with screenshots of changes and simulation results. 3. Expected Output: o The source node displays data such as: java Copy code IP (): Oxygen Level (92), Heartbeat (78), Blood Pressure (14) 4. Provided Resources: o Source files for DSR function block, stored in OPNET directories. o State variable configuration (SV capture). o Screenshots of steps already completed. o OPNET topology file with pre-configured settin...
I'm seeking a seasoned developer to build a Windows-compatible, interactive roulette simulation program in Python, based on my theoretical model. The program should integrate specific strategies and rules that I will provide. Key features include: - Simulating roulette spins - Tracking wins, losses, and total profit/loss - Offering flexible betting options according to predefined strategies The ideal candidate should be able to: - Create a user-friendly, interactive graphical interface - Provide comprehensive documentation of the code - Optionally, enabling the program to test with historical data Please share your estimated timeline and cost, along with examples of similar projects you've completed.
...is expected to be several cm (5) in length, and not more than 2 cm in diameter. - The lenses should be designed to be placed adjacent to each other with a thin isolator between them to prevent crosstalk. - The design should recommend the lenses' material. MATERIAL CHARACTERISTICS: - While the specific material characteristics: low losses an well focused beam SOFTWARE: - The preferred simulation software for this project is ANSYS HFSS. Equivalent tools can be considered as well MAIN PRIORITY: - The primary goal is to ensure each of the lenses focuses the beam with a 'field depth' of about 5 cm. IDEAL CANDIDATE SKILLS: - Proficient in ANSYS HFSS or similar tool - Experience in designing and simulating millimetric wave lenses. - Knowledge about sui...
I am looking for an expert in ANSYS Fluent to carry out a project on simulating a droplet falling on a moving porous substrate, specifically a sponge. The focus will be on understanding the droplet impact dynamics. ...simulating a droplet falling on a moving porous substrate, specifically a sponge. The focus will be on understanding the droplet impact dynamics. Key Requirements: - Proficient in ANSYS Fluent - Previous experience with droplet impact simulations - Able to compare simulation results with published research data for validation - Understanding of sponge as a porous substrate The ideal freelancer will have a strong background in fluid dynamics and experience with droplet impact dynamics. They will also have the ability to validate simulation results with publish...
