Esp32 ethernet example jobs

I want set 10 to 20 message in fireabase with schedule like date and time and its connected with ESP32 and display message on max7219 4 in 1 dot matrix display module. I want only code and connection diagram

We are seeking a talented animator to create a 1-minute dynamic animation for our product promotion. We require a 2D animation style, which should convey a professional tone. I would like the animation to last approximately 1 minute and be based on a film example.

I need to setup a windows computer to route traffic between ethernet network and wifi network so that clients on the ethernet network can connect to the internet on the wifi network

I am looking for a developer who can work on my project to develop functionalities for ESP32 through HTTP POST/GET requests. The project requires the use of Wi-Fi and Ethernet, and routines for Wi-Fi network auto-configuration. The timeframe for the completion of this project is a priority as I have a deadline. The level of complexity for the required functionality is advanced, so I am looking for a developer with experience in advanced programming. The ideal candidate should be comfortable working with Arduino IDE.

I am in need of a freelancer to create a branded PDF document for me as soon as possible. I have a specific design and branding in mind for the PDF and would like the freelancer to follow these guidelines. The main purpose of the PDF is instructional, therefore the freelancer should be able to create a clear and concise document that is easy to understand. The content should include text and images, and I would like the freelancer to use their creativity to make it visually appealing. Ideally, the freelancer should have experience in graphic design and be proficient in Adobe InDesign or Illustrator. The project must be completed within a short timeframe, so I am looking for someone who is able to work efficiently and effectively.

Hi Leonard, I need you to finish styling this page - , and to create one for their main site:

See attached document that has example video link. Send me your best video editing samples that have similar effects to those I need. You must be a professional video editor. I would like it completed in 5 days or less. You will need to edit my video and audio, add close caption and Text to my video and add the effects to my video and render it in the proper mp4 for YouTube. I want daily screen shot progress updates and samples to see how your work and effects are going. It will need to open properly in YouTube on all mobile devices. You must sign my MNDA before I can share any samples of exactly what I need made. I will own the copyright to all the video, native files, source files, images, 3D graphics, effects, audio, art work, files, programs, animations, text, lists, menu&#...

Braille Keyboard Problem Description: - Visually impaired are used to Braille text - Typing is done differently, mostly with 8 buttons and control keys - There is no project using this kind of input standard - Other projects are mapping the 8-button input to ASCII - Implement the Braille HID report - Build a small device wit...Problem Description: - Visually impaired are used to Braille text - Typing is done differently, mostly with 8 buttons and control keys - There is no project using this kind of input standard - Other projects are mapping the 8-button input to ASCII - Implement the Braille HID report - Build a small device with the typical Braille input buttons and the ESP32 Proposed Components - Arduino Nano RP2040 Connect [Link] (contains ESP32) Or any other ESP32...

...should be used throughout the zoo to provide a high level of control and visibility over the network. Switches with Power over Ethernet (PoE) capabilities should be installed where devices like wireless access points, IP cameras, and VoIP phones will be connected. These switches will enable efficient power management and centralized control of the network. 3. Wired Workstations: Each office and service area within the zoo should have wired connections for workstations, including desktop computers, printers, and other peripherals. These connections will ensure high-speed and reliable access to the zoo's internal systems. Wired connections will be provided through Ethernet cables connected to the managed switches. 4. Wireless Access Points: To provide wireless connectiv...

My device has esp32 processor, simcom A7672E gsm module. In addition, there are 8 digital inputs made using 74hc165, 8 digital outputs made using 74hc595, 3 analog inputs, 2 analog outputs, 1 rs485 port, 128x64 oled display working with I2C. The system is exchanging data with http query. Processing the Modbus Tcp/Ip queries that will come from the gsm module, which has a fixed-ip sim card, over the uart, in transparent mode, on the inputs and outputs on the desired, and giving the necessary response.

I am looking for a freelancer to build an IOT system that will monitor and control cold chain devices. The ideal candidate should have experience in building IOT systems using Raspberry and ESP32. Specifically, I need the following sensors for the system: temperature, humidity, vibrations and position tracking. The project requires expertise in the following areas: - Raspberry and ESP32 programming - IOT system design and implementation - Sensor integration and calibration - System architecture - Wireless communications - Data storage and access in the Cloud If you have experience in building similar projects, please apply.

app with bluetooth connection to send commands to ESP32 arduino. I already have this app but APP now need to include another option. Explaning in better words. Existing app sends message to esp32 which configure a radio. this radio works in 2 modes. transceiver and receiver. App has been done to send commands as receiver. now we need to include Transceiver commands. thats it. you may add to existing app or make a new one from scratch, we will provide all information about commands of the radio

I want to communicate with a Logic controller (Phoenix Contact make) ILC 131 ETH, the controller stores the values in an array from 1 to 100 and reads the database of an array from 101 to 250 (this is for instance only). Read & write from and to the controller using TCP/IP Ethernet protocol. I need to get it communicated to our vb.net project, read and write both. In the logic controller, we have assigned the IP of PC, and the logic controller has its own static IP. I should be able to read the array to my .net project continuously e.g. each 500 ms the data should be refreshed so that it will be like live data viewing (streaming). if you need any further information, kindly revert I will be glad to share with you. the project should be in .net and with source code as well.

Please Sign Up or Login to see details.

- I need someone who can help me with the correct pinout to operate this display with ESP32, the picture is attached.

Probe will monitor, Power/Watt usage of the monitored device, will monitor temperature and humidity . average data will collect and save via remote api server and mariadb database. probe will add via web client/api to join to specified WI-FI network. like smart plug which is using in market.

I need help making a few changes to a standard lolin-d32 wroom board I need to add 3 jst connectors and a usb connector. YOU MUST HAVE DESIGN SOFTWARE AND ALSO THE SCHEMATICS FOR WROOM LOLIN-D32 I don’t have this and that is what needs to have the jst connectors added to Then I need the completed design file and BOM Should take less than 30 minutes to complete.

I have schematic design contains esp32, canbus, rs485 etc., it's IoT Gateway project, schematic created in Kicad, pcb outline created in kicad, footprints available, we will probide project file including footprints pcb design need to be done and route the lines according schematic file

Looking for a professional website designer and developer to create a website with more than 10 pages for my business. The website will serve as an informational hub for my clients and potential customers. The ideal candidate should have experience in: - Website design and development - Creating custom layouts and designs - Developing responsive websites - Strong knowledge of HTML, CSS, and JavaScript - Familiarity with content management systems (CMS) The website should be visually appealing, easy to navigate, and optimized for search engines. I am open to suggestions for additional features that will enhance the user experience. Please provide samples of previous work and a timeline for completion. Thank you!

esp32 tasks including: 1. show pictures and text on a tft. 2. enable the app to upload versions automatically from the web. 3. configure ssid,password from web and 7 more tasks - total 10 tasks each task 30$ total 300$

Interested in some design changes for the open source project 'trill bar' Looking to remove the onboard microprocessor and convert the trill bar to be a shield for an ESP32.

I am looking for a skilled freelancer to develop an Appointment Booking System for Services. Example : Features and Integrations: - Payment Processing - SMS/Email Notifications - Calendar Sync The system will be used by more than 5 service providers, so it should be able to handle a large number of bookings and appointments. The user interface should be intuitive and easy to use for both service providers and customers. I am open to suggestions regarding the technology stack and platform, but the system should be secure, scalable, and mobile-friendly. The project should be completed within a reasonable timeframe and within the budget.

I am looking for a skilled freelancer who can build a realistic and improved model of a bottle based on my design. The ideal candidate will have experience in 3D modeling and will be able to create the model using plastic material. The bottle should be small, with dimensions under 6 inches. I have a specific design in mind that I would like the freelancer to replicate, so attention to detail is important. The color need to be changable because we plan to use another bottle soon. The ugly red color is only at the beginning. The cap and the size need to be close by. I need a place where i can put my own label on. it needs to curve around the bottle. I need it in psd formart!

Using a standard espcam dev board, developer to create an ESP32 camera object detection system that can accurately detect people in real-time. The system should have a high accuracy rate of above 95%. A simple app on iOS or Android to control settings and receive detection. This is only a proof of concept and does not require to be polished. The system allows for detection of bipedals ( humans ), four-legged animals, vehicles. Must be able to set scale, sensitivity, etc. There is no live video. This is only a proof of concept and if you develop this project successfully, you will receive the full project for the full product. Ideal skills and experience for this job include: - Proficiency in ESP32 and camera programming - Experience in object detection using OpenCV or othe...

I am seeking an electronic senior engineer developer to build a firmware for a board that uses ESP32 and UWB technology. The primary function of the firmware is indoor tracking, and I am open to suggestions for the specific UWB module to use but must have an ESP32 module. The firmware bot both anchor and TAG, should report the distance from a Tag to an Anchor and the (X, Y) position in meters. The ideal candidate for this job should have experience in firmware development using ESP32 and knowledge of UWB technology for indoor tracking with measures over 100mts. I'm also open to buying the board from your own making and design. The project Success will be finished with the delivery of the firmware and the purchase of the suggested boards. Once the boards arrive...

MQTT Code for Arduino nano - Analog and Digital inputs to MQTT Broken on AWS.

...(100-500 meters) Specific Features: Real-time monitoring PLC Communication Protocol: Modbus The ideal candidate should have experience with ESP32, LoRa, and Siemens PLC. They should also have experience with Modbus communication protocol and real-time monitoring. Battery life optimization and data logging skills are a plus. The project involves building a remote and receiver system that can communicate over a medium range. The system should use Modbus communication protocol and allow for real-time monitoring. The remote should be able to send data to the receiver, which should then forward the data to the Siemens PLC. The project will require the use of ESP32 and LoRa to achieve the desired communication range. If you have the skills and experience required for this p...

I am looking for a freelancer who can assist me with my ESP32 DevKit project. I am using ARDUINO IDE for my programming language. There are multiple different examples of code that Im needing done so the jobs will vary in pay. Most jobs will include but are not limited to the use of servo motors and ESC's, ESP NOW, coded login & password functions, utilization of sensors (mpu6050, gps, camera, etc), delayed response, and more. Ideal Skills and Experience: - Proficiency in ARDUINO IDE - Experience with ESP32 DevKit programming - Strong knowledge of coding fundamentals - Ability to troubleshoot programming issues - Excellent communication skills and availability for ongoing support and guidance.

IoT water level monitoring system using ESP32 & Utrasonic Sensor

I need someone well versed with ESP32 and board design. Scope: sensor integration, command send & revive via BT, good in arduino programming.

I am looking for a freelancer to develop a software for my Firebeetle2 (ESP32) wifi relay controller, which will be used for automation. The ideal candidate should have experience in software development and be able to work with mechanical relays. Please read the requirements in the attached files.

I am looking for a web app developer to create a web app that will plot numerical data to a chart based on date and time. Need to make a web app compatible with Mobil and PC users that plots the provided data to a chart. Data will be downloaded to users device ( ) , users open the web app loads the file , then data gets populated to chart. This is part of a data logger project. I use ESP32 controller to get data from an engine ECU, data is stored on an SD Card on a file called data.txt. Data is arranged by date/time a separator then the encoded data. I currently have it working as part of the data logger. It’s an option where the users can open if they want to see the history (data stored). Problem with it is that can only read and plot 70 - 90 data points. Some of these ...

Good day, I would like to build a GPS TIME SERVER (NTP Protocol) based on ESP8266/ESP32 using ESPHOME. ESPHOME's GPS module integration works well but has no option for NTP Server. There are projects available for Arduino SDK which include NTP Server code, e.g. But those do not integrate with ESPHome. So what is needed is a good quality NTP server library for ESPHOME which uses GPS time. At best, the resulting code would be submitted into ESPHOME code base. code requirements: - Resulting code should be open-source and git-hosted - code should integrate well with ESPHome e.g. using remote_package feature functional requirements: - robust GPS-to-NTP implementation in ESPHome - focus on reliable, high-precision time offering to feed

This is a small program written in 'C' using 'VSCode' for an 'ESP32' using the 'ESP-IDF' extension. We expect this should take 1-2hours maximum. main.c code has been attached to this project, however we will supply the full project files upon starting. Currently the code is written in a single `main.c` file. I am after the various functions and variables taken out of the `main.c` file and into their own respective `.c/.h` files. all functions/variables should be able to be called from any c file. The code is only 1600 lines long and currently compiles from a clean ESP-IDF workspace. The code must compile within VSCode and therefore the relevant '' may need to change.

I am looking for a freelancer who can help me with my Zencart website. I need to have a product popup similar to the one on the following website: Specifically, I want the popup to display the product image. Ideal Skills and Experience: - Experience working with Zencart websites - Knowledge of Facebook product popups - Ability to customize designs for popups

ESP32 motor control circuit. Adjustable Amp rating, over current protection, Hand off Auto switch, Safety interlocks ( Dry contact) LCD display

...designer to create a custom Wi-Fi thermostat using the ESP32-WROVER-E-N8R8 module. The design must use SMD components and be no larger than 60x60mm. The thermostat will be powered by 24V AC, and it will control up to 4 relays handling 24V AC / 1A max. Key requirements: ESP32-WROVER-E-N8R8 module with program and reset buttons, as well as status LEDs for upload and operation. Four relays capable of handling NO - COM 24 Volts AC / 1 Amp max. (pins defined by designer) Rectifier bridge to convert 24V AC input to 12V DC / 3.3V DC. Temperature and humidity sensor: Sensirion I2C SHT31-DIS-B2.5kS. VOC sensor: Sensirion I2C SGP40-D-R4 (with a different address on the same bus). SMD components and a rectangular PCB no larger than 60x60mm. Ethernet interface with port( pre...

To make os and android application same as given sample Ask hail application The goals is to give my visitor clear map On area with area to be visited based on their interests such as hyratag, kinds area , family area, Hiyratage etc. It’s mainly tourism application. . Basic functions: Category Product Location Distance Drive to Top visited based o review Weather condition

Hi, I'm reaching out from a company called Keycafe () We create electronic Smart boxes for keys so that car-sharing companies, apartments, or even vacation rentals can have a place to check keys in and out. Our Smartbox connects via cellular, WIFI/Ethernet, we would like to do some testing on the WIFI and cellular at one of our locations. You'll take notes and provide us with feedback as to how the system is operating. This will require an ON-site visit. The client is located in New Hampshire, US.

I am looking for a freelancer who can assist me in identifying the .bin file codes for my ESP32-WROOM-32 board. The primary purpose of the .bin file is for identifiying the codes of this .bin file, and it is written in C/C++. The ideal candidate should have experience in the following: - C/C++ programming language - Debugging and identifying .bin file codes This project requires a freelancer who is detail-oriented and can work efficiently to identify the codes in a timely manner. The deliverable will be a report on the identified .bin file codes. this .bin file is a web page ip configuration that has many many codes, so explaning in other ways. i need a person that can tell me which code is for each bar clicking. so bellow is what you need to do 1 - identify this .b...

We need someone who can work an electronics project, using arduino, ESP32. Need to develop firmware, schematics and PCB layouts, etc. related work. freelancers from Delhi, India only will be preferred.

I am looking for an experienced Espressif IDF developer to work on a project that involves motion detection using MMWAVE sensor and temperature, humidity, and indoor air quality monitoring using BME680 sensor. The main objective of the project is to develop a system that can detect motion and send alerts. I have all the required sensors and hardware for the project. The ideal candidate should have the following skills and experience: - Expertise in Espressif IDF development - Proficiency in C programming - Knowledge of MMWAVE and BME680 sensors - Ability to develop a system that can detect motion and send alerts - Strong problem-solving skills - Excellent communication skills If you have the skills and experience required for this project, please apply and provide examples of your previo...

...frequently asked questions. ? Project Goals: Provide an engaging and detailed overview of Groom's business model and platforms Answer commonly asked questions to enhance user understanding Showcase the benefits of Groom for both providers and customers Create an impactful and visually appealing video experience ? Preferred Style and Approach: We envision a live event overview style, similar to this example: [Insert YouTube link: ]. We encourage your creative vision and welcome suggestions to bring our story to life in a captivating way. However, specific details and moments will be provided to guide the overall direction of the video. ? Desired Skills and Experience: To excel in this project, the ideal candidate should possess: Experience in creating event videos, delive...

I am looking for a freelancer to develop a mobile app and ESP32 code for an audio transmitter project. Here are the details: Mobile App Development: - A mobile app is needed to transmit audio to the ESP32 - The preferred platform for the app is Android - The freelancer will need to develop the app as there is no existing app ESP32 Code: - I want one mobile app and ESP code which receives mobile app data and plays it. - The desired range for the audio transmission is up to 50 meters. Ideal Skills and Experience: - Experience in mobile app development for Android - Knowledge of ESP32 coding - Background in audio transmission technology - Ability to develop a reliable and efficient system for audio transmission.

The current code is written in ESP8266-RTOS-SDK using ESP-NOW which is ESP-IDF compatible (ESP32). Now we want to upgrade to Matter. Need someone with prior experience in Matter. Code to be ported: Relay On/Off, IR blaster, UART for data sync Budget: Rs 20,000

I have a photo of a sample business card that I would like to use as a business card template. I also have a sample file with the original colors that can be used to adjust the colors in the photo. I would like the final file to be delivered in a couple of standard formats for printing and future editing (such as .jpg, .png, and ideally some vector file format.. vector pdf??). I think printers prefer artwork as a vector PDF, 300dpi or higher, and file size no greater than 20Mb.

ESP32 - Code Finalize Project I am looking for a developer to finalize my ESP32 code, which is almost complete. The main functionality I require is sensor readings. I prefer the code to be written in C/C++. We have an embedded application which collects data from the environment and stores in an SD card. We would like to send the data to a server via JSON web services. The data can be sent as an attached file as saved to the SD card, or in JSON format as the message body. We are capable of modifying the web service according to the format of the data sent in collaboration. An example file and the current code are attached. Ideal Skills and Experience: - Proficient in C/C++ programming language - Experience with ESP32 programming and development - Knowledge ...

Need a example using Photon Realtime Cloud multi-players poker game(like High Card) and with construction steps documents. , I would like to use it as a textbook for teaching purpose. Requirements: - Construction steps - Simple architecture explanation - A simple client-side template on webpage(prefer Vue, Angular or vanilla js) - A simple server-side card dealer and control the game process No need for the game arts, and may have further project for Photon Fusion example.

I need someone who has experience with Microsoft Information Protection for Office 365 to help me with setting up classifications a...policies, but I need help with this specific aspect. The ideal candidate should have experience with: - Microsoft Information Protection for Office 365 - Setting up classifications and labeling - Knowledge of data loss prevention and encryption and rights management would be a plus. The result of the task should be an example in C# showing : * Labeling a document * Upgrading the classification of a document * Downgrading the classification of a document. The example should be programmed in C# using and CAN NOT use any Azure to do this.

So in short I have a system similar to foodpanda, Uber eats and so on. The restaurant have a tablet or similar in the place. I need the possibility for a Thermal Printer to connect to it. It's a Progressive Web App (VueJS+Quasar). Currently we have a RPI as a gateway locally, we want to remove that. It could be direct Ethernet connection from web to printer, or through BT or both. Printers could include Epson TM-T series, Bixolon and Star Micronics. The ideal solution should support multiple solutions. So there are some possibilities: 1. Look at and their plug-ins for what has already been created or used () 2. Foodooma also has a thermal printer module: ()