Voltage measurement microcontroller일자리

I'm seeking a skilled programmer and circuit designer to help create a home security system using a Raspberry Pi. Key Requirements: - Programming the Raspberry Pi to facilitate automation and control tasks. - Designing a cir...cameras. Main Components: - Cameras and video recording: The system should be able to capture footage and potentially stream it. - Sensors and alarms: Integrating motion detectors, door/window sensors, and alarms is crucial. - Remote access and control: The system needs to be controllable and accessible from a remote location. Ideal Skills: - Proficient in Raspberry Pi programming and microcontroller programming. - Experience with circuit design. - Familiarity with wireless sensor communication. - Knowledge in designing home security sys...

I am looking for a person to make a firmware external loader for the STM32G491RE microcontroller. The external loader should work in QSPI mode with W25Q128 memory. Development environment: STM32CubeIDE 1.17.0 or later. Programmer/debugger: ST-LINK-V2. Język programowania: C Biblioteki: HAL Note! I tested the external loaders available on the Internet. If I use classically Init(), Erase(), Write() functions work correctly. But the external loader with these functions does not want to work. Probably it is a problem of STM32CubeIDE configuration or or GDB server or ST-LINK. I do not have relevant experience. I am looking for someone who is able to make a loader for this particular configuration.

...Example 1: Streak artefacts from dental fillings resembling focal uptake in PET. * Example 2: Beam-hardening artefacts misrepresenting SUV values in dense anatomical regions. —Mitigation Strategies— 1. Hardware Solutions: * Dual-Energy CT: Reduces beam-hardening and metal artefacts by differentiating material densities. * Optimized CT Acquisition Protocols: Adjusting parameters like voltage and filtration. 2. Software Corrections: * Iterative Metal Artefact Reduction (iMAR): Advanced reconstruction algorithms to minimize artefacts. * AI-Based Reconstruction: Emerging methods using machine learning to predict and correct artefacts. 3. Limitations of Mitigation Strategies: * Acknowledge that no single method fully eliminates artefacts. * Em...

... The pieces vary in size from 1 inch to 4 feet in diameter. Key Project Aspects: - I need assistance with engineering analysis to determine the feasibility of using a 4' x 8' area as a vacuum chamber. - This chamber will be created using two thin sheets of polycarbonate with a small gap (around 1/2 inch) in between. - There will be metal 'nipples' on either side of the chamber to allow for voltage application. - The chamber will have approximately 72 openings on either side to accommodate these aluminum parts. Main Concerns: - The suction capacity of the vacuum system. - The effects of vacuum on parts of varying sizes. I may consider switching to an all-metal design if necessary for conductivity. I need an expert's insights on how much vacuum will be...

...example attached) but the voltage drop is too big with diodes. Battery is 3.6V and circuit needs at least 3.3V. The design must adhere to the following specifications: - Incorporate triple redundancy - Ensure minimal voltage drop across the circuit - The circuit must be able to withstand a malfunction in the main device that could produce up to 7.5V without allowing any current to flow into the battery - Background current consumption should be minimal Ideal candidates for this project should possess: - Extensive experience in circuit design - Proficiency in using integrated circuits and discrete components - Ability to simulate circuits and show results/spice model Notes on example. Item 1. Do not allow any current to flow into battery, device may have voltage...

I'm seeking a microcontroller specialist to assist with an ultrasonic speaker application primarily for sound transmission. This project will also involve PCB production. Key Responsibilities: - Design and implement an ultrasonic speaker system primarily for sound transmission. - PCB design and production for the system. - Utilize a microcontroller for system control and operation. Ideal Candidate: - Extensive experience with microcontroller-based projects. - Proven track record in designing and producing PCBs. - Knowledge in ultrasonic technology and sound transmission. - Ability to work independently and deliver high-quality work on time.

보다 자세한 내용을 확인하시려면, 회원 가입 또는 로그인 절차가 필요합니다.

I'm looking for an expert in embedded software development for a microcontroller-based system. STM32H series based Experience with EKF controller software is preferred Able to port drivers wherever required Follow the guidelines for C/C++ Prefer someone who can use AI tools to develop code rapidly

I'm seeking a WareOS developer to assist with a project involving data collection from a watch. The job consists of the following tasks: - Utilize the gyroscope and accelerometer data from the watch every 0.1 seconds. This should be triggered by a mobile app, followed by a vibration from the watch, and then a subsequent measurement over a 5 second range. - Send this data to a mobile app via BLE (Bluetooth Low Energy). - No user interface is required, as I will integrate this into the main app at a later stage. The ideal candidate for this project should have: - Extensive experience in WareOS development. - Proficiency in working with gyroscope and accelerometer data. - Skills in BLE data transmission. - Prior experience with similar projects would be a plus. Looking ahead, I...

I'm looking for a professional and sleek 2D animation video to showcase the features of a smart wristband. This wristband includes capabilities such as location tracking, altitude measurement, geo-fencing, and heart rate monitoring for field workers. This video's target audience is adults and professionals, so the tone should be sophisticated and polished. Key Features to Highlight: - Location Tracking - Altitude Measurement - Geo-fencing - Heart Rate Sensors Ideal Skills and Experience: - 2D Animation - Understanding of Motion Graphics - Ability to convey a professional and sleek tone - Experience targeting videos towards adults and professionals - Ability to create informative and educational content within a professional framework.

I'm seeking an engineering designer to create manufacturing-ready drawings for a glass Beverages bottle. The design should incorporate measurement markings engineered drawings. Skills and experience needed: - Proficiency in engineering design with a focus on glass manufacturing - Experience in designing glass beverage bottles - Ability to incorporate specified features into designs - Knowledge of creating designs suitable for mass manufacturing - Strong attention to detail and precision in creating measurement markings

I'm looking for an innovative solution that can verify the presence of man-made cavities beneath the earth's surface at any given location. Once identified, the solution should provide all relevant measurements - height, width, length, and crucially, the depth from the earth's surface, along with a visual representation of the cavity. Cavity could be empty or could have some sort of minerals Key Requirements: - The solution must accept any location I provide. - Deliverables include a fully documented end-to-end process. Preferred Technologies: - ArcGIS - QGIS - Python - Ground-penetrating radar (GPR) - Seismic surveys Ideal Output: - Measurements should be provided in Shapefile format. This project is primarily geology-focused, aimed at assisting in construction planning...

I'm looking for an innovative solution that can verify the presence of man-made cavities beneath the earth's surface at any given location. Once identified, the solution should provide all relevant measurements - height, width, length, and crucially, the depth from the earth's surface, along with a visual representation of the cavity. Cavity could be empty or could have some sort of minerals Key Requirements: - The solution must accept any location I provide. - Deliverables include a fully documented end-to-end process. Preferred Technologies: - ArcGIS - QGIS - Python - Ground-penetrating radar (GPR) - Seismic surveys Ideal Output: - Measurements should be provided in Shapefile format. This project is primarily geology-focused, aimed at assisting in construction planning...

I'm seeking a skilled developer to create a cross-platform mobile app using React Native. The app, a simple measurement tool, leverages the phone's camera to detect object outlines and calculate dimensions. Key Features: - Four screens: - Measuring Screen - Signup/Login - Users' Geolocation - Results Ideal candidates should have extensive experience with React Native, Node.js, and UI design. Familiarity with camera integration in mobile apps will be a significant advantage. A keen eye for detail and a commitment to delivering a high-quality, user-friendly app are essential.

I'm in need of an...strong background in AVR microcontroller programming. My current project utilizes the ATmega 1284P microcontroller, and the development environment is CodeVision AVR. Key tasks will include: - Debugging and troubleshooting: I need someone who can effectively identify and solve issues in the code. - Code optimization: While I primarily focus on debugging, I also value someone who can enhance the performance of the code. You will have access to: - Detailed Documentation: I have comprehensive documentation for the project available for you. Ideal candidates will have: - Extensive experience with Embedded C and AVR microcontrollers. - Proficient skills in debugging and optimizing code. - Previous experience working with CodeVision AVR and the ATmega ...

I need an experienced electrical engineer to design a DC-DC buck converter for my project. Key Requirements: - The converter should step down input voltage to a stable 24V output. - It needs to handle an input voltage range of 400V. - The output current should be capable of reaching up to 10A. Ideal Skills: - Proficiency in buck converter design. - Strong understanding of electrical engineering principles. - Prior experience with handling high current outputs. -Prior experience in military or aviation or EV Please include examples of relevant projects you've worked on in your proposal.

I'm looking for an expert to help me ...help me set up PURCHASE conversion tracking on my Shopify site via Google Tag Manager (GTM) and Google Ads. The primary goal of this project is to accurately measure sales performance, which will ultimately inform our ad spend and strategy. Key requirements: - Expertise in Google Ads and GTM - Extensive experience with Shopify integration - Proven track record of enhancing sales performance measurement through conversion tracking setup My Shopify site has GTM partially set up, so some initial groundwork has been done. The ideal professional would be someone who can assess the current setup, complete any necessary adjustments, and implement the PURCHASE conversion tracking in a way that it provides clear, actionable insights into our sal...

YouTube Campaign Plan for 1 Month 1. Define Objectives and Goals: - Establish clear objectives for the campaign (e.g., increasing brand awareness, growing subscriber base). - Set measurable goals such as achieving a specific number of...Social Media: - Promote videos across multiple social media platforms (e.g., Facebook, Instagram, Twitter, LinkedIn, TikTok) - Email Marketing: - Send newsletters and email updates to the subscriber list with links to new videos - Collaborations and Influencers: - Partner with industry influencers and other YouTubers to reach a broader audience if applicable. 5. Analytics and Measurement: - Track Performance: - Use appropriate Analytics and other tools to monitor the performance and campaign metrics - Evaluate ...

...experienced engineer to help me with a project involving a DC motor, multiple sensors, and PCB design. Key Requirements: 1. **DC Motor Control**: The primary function of controlling the DC motor is speed regulation. 2. **Sensor Integration**: The project will involve the use of various sensors including: - Temperature sensor - Light sensor - Humidity sensor - Solenoid Valve - Flow Measurement - Sim Module - RTC 3. **PCB Design**: The PCB will need to cater for: - Signal processing and conditioning - Power management - Communication interfaces Ideal candidates should have a strong background in motor control, sensor integration, and PCB design. Expertise in signal processing, power management, and designing communication interfaces is a must. Exp...

I'm looking for a skilled hardware designer to create a board for the STM32L031K6 microcontroller. The board will be used for prototyping, and needs to be compatible with the ST-Link V2 programmer. Key Requirements: - The board should include GPIO pins and Analog inputs/outputs. - The power source for the board will be USB, so it needs to be designed accordingly. Ideal Skills and Experience: - Extensive knowledge and experience in hardware design, particularly with STM32 microcontrollers. - Familiarity with ST-Link V2 programming. - Ability to design for USB power supply. - Good understanding of GPIO and Analog inputs/outputs. I need a professional who can ensure the board is designed efficiently for prototyping purposes.

I'm seeking an experienced professional to assist with the installation of pressure sensors on gloves. These sensors will be used to measure the forces applied on an airplane yoke during training and simulation sessions. Needed in Ireland Key Details: - Sensor Type: Pressure sensors - Installation Location: Fingers of the gloves - Data Usage: Forces measured will be used for training and simulation Ideal Skills and Experience: - Expertise in sensor installation and calibration - Experience with training and simulation equipment - Knowledge of pressure sensors and their application - Ability to ensure durability and functionality of sensors under various conditions

...blueprint grid or construction lines subtly in the background. - **Architectural Symbols**: Use icons like a house, a roofline, or even a simple blueprint symbol to represent construction and renovation. 2. **Integrated Tools**: - **Hammer and Wrench**: Tools intertwined with the text can illustrate the hands-on nature of your business. - **Ruler or Compass**: Symbols of precision and measurement to show your meticulous approach. 3. **Text and Typography**: - **Bold and Clean Fonts**: Stick to strong, sans-serif fonts that convey professionalism and modernity. - **Layered Text**: Experiment with text overlays or stacking to create a dynamic look. 4. **Color Scheme**: - **Blues and Greens**: Shades that suggest trust, reliability, and growth. - **Accent Col...

I'm in need of a custom tool for measuring typing speed, specifically focusing on CPM (Characters Per Minute). This tool should include features for accuracy calculation and allowing for custom text input. Ideal Skills: - Software Development - Data Analysis - User Interface Design Experience: - Prior development of measuring tools or similar software is highly appreciated. - Proven track record of delivering user-focused software.

I am looking for a seasoned professional with extensive experience in embedded software development, particularly focused on real-time processing. The primary task will be to develop embedded software for a microcontroller-based device. Ideal skills and experience: - Proficient in embedded software development with a focus on real-time processing. - Extensive experience working with microcontrollers. - Skilled in software testing and configurations. - Background in electrical and mechanical design. Please provide examples of similar projects you've completed.

I need a set of 10-12 sales brochures (data sheets) specifically for the WingScan-B LiDAR Volumetric Measurement System. Each brochure will target a different industry, highlighting the specific use cases and applications of this new technology within that sector. The primary purpose of these brochures is to inform and persuade industry professionals in the construction and mining sectors about the capabilities and benefits of our product. The ideal freelancer for this project should have: - A strong understanding of the construction and mining industries - Excellent technical writing skills - The ability to translate complex technology into engaging, accessible content for industry professionals. Please note that LiDAR volumetrics is a new technology with endless applications,...

I'm in need of a professional who knows how to navigate QGIS to extract measurements of a specific area as displayed in the blurred section of th...knows how to navigate QGIS to extract measurements of a specific area as displayed in the blurred section of the attached screenshot from Google Earth. The measurements I require include: - Depth - Height - Area These measurements are primarily for geospatial analysis. Therefore, the ideal candidate should have a strong background in this field and be adept in the use of QGIS. I need the measurement data to be provided in an image format. Skills & Experience: - Proficient in QGIS - Strong background in geospatial analysis - Ability to extract and interpret geographical data - Experience with Google Earth - Can deliver data ...

...interface should send pre-written commands to the DAC 8760 : Project Summary: The project is a ESP 32-S3-mini-n8 user interface programming project in MicroPython and FreeRTOS, that should work with a screen on the parallel port. The user interface should send pre-written commands to the DAC 8760 via SPI and read a voltage via I2S. The project has a PCBA part and a Firmware part. The major part is firmware development for UI and the PCBA part is just to test the UI. The Stimulation running page, where the ESP32 will send 700 commands per second to the DAC, during 20-60 minutes, But it should manage to responds without delay the user interface command while sending the commands to the DAC and refresh properly the

Hi! I'm seeking a developer to create custom firmware for the nRF52840 and nRF52832, leveraging the nRF Connect SDK. The firmware should include the following features: ADC Measurement: Capture ADC data via the TWI interface using the AD5593 IC. LoRa Communication: Integrate and enable the RFM95 module to send data via LoRa. Bluetooth Advertising: Enable BLE advertising to broadcast the collected data. I currently have a working solution built with the nRF52 SDK (version 17.1.0), but I need the firmware to be migrated and fully implemented in the newer nRF Connect SDK. Thank you for your time and consideration! Please let me know if you're interested or have any questions. Best regards,

I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on this project. Proposals...

...updates. Requirements: Platform Expertise: React Native with integration of native modules for Android and iOS. Functionality Needed: Real-time tracking: Send latitude, longitude, speed, and distance data to the server via API every 10 seconds. Background support: Ensure GPS tracking works seamlessly when the app is in the foreground or background. Distance calculation: Implement precise distance measurement between data points. Optimization: Minimize battery consumption while maintaining accurate tracking and data transmission. Ideal Candidate: Extensive experience with React Native and native module integration for GPS functionality. Expertise in integrating APIs for real-time data transmission. Strong knowledge of background location services on both Android and iOS platforms...

I'm looking for a seasoned professional with hands-on experience in both hardware and software aspects of the WM8904 Audio Codec. The goal is to seamlessly integrate this codec with the LPC55S69 NXP Microcontroller for audio playback directed to speakers in a consumer electronics setup. Ideal Skills and Experience: - Profound knowledge of WM8904 Audio Codec - Extensive experience with LPC55S69 NXP Microcontroller - Hardware and Software integration skills - Expertise in audio playback systems for consumer electronics - Familiarity with speaker output systems

Job will be to program a small capacitive IPS, TFT LCD touch screen controller to a remote 12-channel relay board. UART2: TTL/CMOS. communications. There is software available for the small 2.1 inch touchscreen and menu icons, and to assist in firmware. The relay board would prefer to utilize Raspberry Pi Arduino and use pre-configured circuit board. for 12v relay outputs. The outputs will be controlled by the touch screen controller's selection icons and menu's. The conclusion is to have a circular touchscreen controller with visible picture/icons that will: 1) push to activate an ignition relay. 2) Menu's to activate all additional relays on/off functions with picture icons for each selected choice. Price: $50-100

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable

I'm in need of a compact, battery-powered camera module and custom built microcontroller designed for eye-tracking. This module should: - Operate in infrared wavelengths - Connect to a small, custom-built microcontroller - Support wireless streaming of the camera feed - Provide 1080p quality video without auto-focus The camera will be situated near the eyes, so size and weight are critical considerations. The wireless communication protocol for this project is Wi-Fi, and the power source is a battery. Ideal candidates will have experience with camera module design, microcontroller integration, and wireless technology. Please note, the primary application for this camera has not been specified yet, so flexibility and adaptability will be key.

...Project Requirements: 1. PCB Circuit Design: o Design the schematic circuit diagram for the Smart Tree Pot. o Integrate sensors for soil moisture, temperature, light to monitor plant conditions. o Design an expression display system to show visual feedback (70+ different expressions). o Include a microcontroller for handling sensor data and controlling the display. o Power management: Battery operated and C-type option. 2. Firmware Development: o Develop firmware for the microcontroller to process sensor data and determine which expression to display based on real-time environmental factors. o Implement expression logic for over 70 unique expressions that reflect different plant conditions (e.g., happy, thirsty, too hot, etc.). o Integrate a user interface (vi...

I'm creating a Motor Operating Valve (MOV) and need a professional to design the PCB and develop embedded software for it. Ke...Operating Valve (MOV) and need a professional to design the PCB and develop embedded software for it. Key Requirements: - PCB Design: The PCB design should accommodate 20 Digital Inputs and 10 Digital Outputs. - Embedded Software Development: I need an expert to develop the required embedded software for the microcontroller. The software should be able to efficiently control the fluid flow through the MOV. Ideal Candidate: - Experience in PCB design, especially with microcontroller-based projects. - Proficiency in embedded software development, ensuring smooth operation of the MOV. - Prior experience with fluid control systems would be a pl...

...Approachable and Collaborative: Highlight empathy, active listening, and a focus on building long-term client relationships. STRATEGIC COMMUNICATION PILLARS: Comprehensiveness: Holistic solutions that address multiple business areas. Strategy and Innovation: Support clients in identifying opportunities, implementing technology, and optimizing processes. Results and Metrics: Emphasis on measurement, analysis, and constant improvement to ensure real returns on marketing and commercialization investments. Closeness and Trust: Position LAGUK as a strategic ally, not just a service provider. BRANDING EXPECTATIONS: The creative team must develop a visual and communicational identity that: • Minimalist style logo • Reinforces the professional and strategic nature ...

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable

I'm looking for a person with experience in interior measurement to help me with measuring the as-built condition of the commercial unit which will be used for constructing the interior design of a beauty spa. The total area of the spa is 1800 sq ft (main floor + basement) You will need to measure: - The reception area - The treatment rooms - The common areas This project involves measuring both the structural elements and the specific fixtures and fittings within the space. A keen eye for detail, excellent measuring skills, and experience in interior design and architecture will be essential for this project. Please include examples of similar projects you've worked on in your proposal. Thank you!

...communication modules) remain off or in low-power mode. Motion Detection: A PIR sensor detects motion and sends a signal to the management microcontroller. The microcontroller activates the corresponding camera and wakes up the Coral Dev Board Micro. Image Capture and Processing: The camera captures an image or sequence of images and sends it to the microcontroller. The microcontroller transmits the data to the Coral for real-time inference. Object Identification: The Coral analyzes the images using AI models (TensorFlow Lite) to detect objects included in a predefined "blacklist." Data Transmission: If an object of interest is detected: The microcontroller activates the configured communication module (Wi-Fi, LoRaWAN, or 4G/LTE). Alerts ...

I'm looking for an embedded system expert to design a hardware for industrial automation. Key Requirements: - Design an embedded system - Incorporate a microcontroller - Optimize for industrial automation applications Ideal Skills: - PCB design - Embedded system design - Microcontroller programming - Understanding of industrial automation needs - Experience in designing for durability and reliability

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files ... Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in Microcontroller Hardware Configuration - Familiar with LVGL and GUI Development - Skilled in Library Debugging and Customization - Prior experience with SquareLine Studio Integration is highly desirable

I need someone skilled in blinds measurement to assist with measuring for blinds in my bedroom. The specific type of blinds hasn't been decided yet, so experience with various types (roller, Venetian, Roman) is a plus. Potential Tasks: - Accurately measuring the window space for blinds - Offering advice on suitable types of blinds based on the measurements - Optional: Assistance with installation if needed Ideal Skills: - Proficient in blinds measurement - Experience with various types of blinds - Ability to provide advice on blinds suitability - Installation skills would be a bonus

I'm looking for an expert in PCB and hardware design to help me create a development board. The PCB will need to integrate a Nordic nRF microcontroller and various sensors. Ideal candidate should have: - Extensive experience in PCB design and hardware prototyping. - Proficiency with integrating microcontrollers and sensors onto PCB. - Familiarity with Nordic nRF microcontroller. - Ability to design for robust, consumer-grade applications. - Familiarity with Analog Devices Sensors.

I'm looking for a skilled copywriter with SEO expertise to create product descriptions for some new products which we need to put on our website. The target audience for these descriptions is primarily businesses. We supply a range of test and measurement equipment and need to keep our website up to date so there could be ongoing work. It is important that you do not use AI and we will check this. Also please do not copy and duplicate other descriptions already online. We need original content and each description needs to be around 500 words or so but short enough not to be off-putting. You can look at our website Testrix Systems. Key Responsibilities: - Craft engaging and informative product descriptions that appeal to businesses. - Integrate SEO elements such as relevant k...

I'm in need of a comprehensive tech pack for a line of sports bags. This tech pack should be meticulously detailed and include: - Material specifications: I need to know exactly what materials should be used for the bags. - Dimensions and measurements: Precise sizing is crucial, so every measurement needs to be included. - Logo placement: The tech pack should clearly indicate where the logo should be placed on each bag. Ideal candidates for this project are those with a background in clothing design and tech pack creation, particularly for accessories. Please provide examples of similar projects you have completed in your proposal. I have got the logo design and bag design, but I would also need these drawn professionally. I have the Pantone colourways scheme for the bags ...

I'm looking for a skilled engineer to PCB design an automatic water pump controller that can detect both ground and overhead water levels. This system should also monitor current and voltage, and control reserve water. Key Features: - Compatibility with single or three-phase pumps and power starters, up to 30amp switching. - Utilization of a microcontroller, specifically the ESP32 WROOM. - Incorporation of an OLED display, with a manual toggle switch. - Implementation of water level detection via the water conductivity method. Ideal Skills and Experience: - Proficient in microcontroller programming, particularly with ESP32. - Previous experience designing water pump controllers. - Understanding of water conductivity level detection. - It is capable of working wi...

Integration of Displacement Sensor and Intel RealSense with FANUC Robot for Seam Tracking Job Description: We are looking for a skilled freelancer to assist with integrating a displacement sensor (such ...communication protocols. • Ability to interface PCs with robots and handle real-time data exchange. • Experience in robot seam tracking or welding automation is a plus. Preferred Experience: • Previous work integrating vision systems (such as Intel RealSense) with industrial robots. • Experience using Karel or Robot Programming Language (TP) for FANUC robots. • Familiarity with displacement measurement systems and 3D vision systems. • Knowledge of vision-based seam tracking and real-time robot motion correction. Budget: Negotiable, based on e...

I'm looking for design ideas for a handheld screen delay measuring device, primarily intended for industrial and consumer measurement of monitors and TV devices. Key Requirements: - The device needs to be handheld, making it portable and easy to use in various industrial settings. - The device should feel comfortable to hold - The device should be cost effective to manufacture in 100s-1000 quantities. Not 1000+ - It should have a user-friendly interface to ensure ease of use, even for individuals who may not be particularly tech-savvy. This must include buttons for navigation, and a small screen 2" to 2.5" in diagonal viewing area. - The build quality of the device needs to be durable, capable of withstanding the rigors of industrial use. - There must be 1 x USB-C co...

I'm seeking an experienced firmware developer and PCB designer who can assist with a mixed-signal circuit design project. The focus will predominantly be on firmware development. Key Responsibilities: - Develop firmware for a mixed-signal circuit using STC or any suitable microcontroller for LED control. - Collaborate on the design and layout of the PCB. - Contribute to the overall circuit design. Ideal Skills: - In-depth knowledge of firmware development. - Extensive experience in designing mixed-signal circuits. - Proficiency in PCB layout and design. - Familiarity with STC and other microcontrollers. - Understanding of analog and digital components.