Custom 3D Printed Porcelain Pot Design

I need a 3D designer to transform a photograph into a printable 3D file. The object is a ceramic pot made from porcelain that should adopt organic shapes in its design. The first pot must have a flat bottom and should be designed to hold a plate with a diameter of 300mm inside it. The pot wall thickness should be 11mm. Overall dimensions should be derived from the provided picture, approximately, 395 in width and 480 in height. The STL file produced must be clean and ready for 3D printing. (Third picture) The second pot's top part should be modeled after the second picture, wide and round enough to allow a 30 cm foam plate to be placed from the top front opening with no interference, then the pot should seat perfectly in the position highlighted by the blue dotted line, where it get covered by the model with no exposed part. The overall width of the pot shouldn't exceed 39 cm, the wall thickness is set to be 11mm = 1.1 cm. from the blue dotted line and below the pot should resemble the original shape in the first picture with nice slope and curve to it with a base 16 cm ish in diameter. This project requires someone with: - Proficiency in 3D modeling software - Experience in creating printable 3D designs - A solid understanding of ceramic pots and porcelain - Fast delivery of the final 3D file - Two days delivery maximum. it should be delivered in under two days, one day preferably. Please, only bid if you have relevant experience and skills.