Simulink ofdm transmitterKazi

I'm looking for an experienced Simulink designer who can create a control system for me. The specific type of control system I need is a Fuzzy PID controller. Ideal skills and experiences for this project include: - Proficiency in MATLAB Simulink - Experience with designing control systems, specifically Fuzzy PID controllers - Strong understanding of control theory and systems - Ability to provide clear and concise documentation of the design process.

...follow the technical specification, implemented in Simulink. Key design considerations include using J-K flip-flops, defining states and transitions, and using a Moore machine approach for stability. The solution requires a state diagram to identify the required states and flip-flops. Testing must ensure proper functionality under varying speed and input conditions, adhering to a structured test strategy. The report documenting this design must be professional, written for an engineering audience, and within a 10-page limit, including all figures, equations, and tables. It should include an introduction, design description, testing and simulation results, and a conclusion. Submissions must include both the report and a zip file of the Simulink project for testing. empha...

I'm seeking a professional with expertise in MATLAB and Simulink to help me design a trapezoid signal generator using a JK flip-flop. This project is primarily for research and development purposes. Key Requirements: - Design a trapezoid signal generator using a JK flip-flop in MATLAB Simulink - Ensure the model is reliable for research and development use - Provide detailed documentation including model design, parameters, and testing procedures. Ideal Skills: - Extensive experience with MATLAB and Simulink - Strong understanding of signal generation and flip-flop circuits - Research-focused mindset

I'm in need of an intermediate Matlab Simulink expert to assist with a photovoltaic (PV) project simulation. The primary focus is on modeling an off-grid PV system. Key Tasks: - Create an off-grid model incorporating various renewable energy sources, primarily solar panels. - Model potential faults specifically in the solar panels. - Diagnose faults as they occur during the simulation. - Simulate degradation over time in inverters. - Simulate the impact of different weather conditions on PV system efficiency. Ideal Skills: - Proficiency in Matlab Simulink is a must. - Previous experience with photovoltaic system simulations is highly desirable. - Strong ability to model and diagnose faults. - Knowledge and experience with inverter degradation over time. This project ...

...initial angle  o. Experimentally estimate the distance lG between the center of mass G and the center of rotation O (see Figure 1). Design an Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. Build your designed Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. (will be graded in the class) Use the Simulink support package for Arduino to log the data to a computer using Arduino UNO. (will be graded in the class) 7) Experimentally measure the response when releasing the pendulum from rest with a given initial angle  o. 8) 9) Use the collected data to estimate the dynamic parameters of the system. Use the estimated parameters to simulate the system parameters. 10) Plot the simulated re...

...initial angle  o. Experimentally estimate the distance lG between the center of mass G and the center of rotation O (see Figure 1). Design an Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. Build your designed Op Amp-based interfacing circuit to scale the analog signal and add to it an offset of 2.5 volts. (will be graded in the class) Use the Simulink support package for Arduino to log the data to a computer using Arduino UNO. (will be graded in the class)7) Experimentally measure the response when releasing the pendulum from rest with a given initial angle  o. 8) 9) Use the collected data to estimate the dynamic parameters of the system. Use the estimated parameters to simulate the system parameters. 10) Plot the simulated res...

...seeking a professional who can design an electric actuator motor control system to prevent damages due to flooding, specifically by controlling a channel penstock in a river bed. The control system contains the following parts: A) AUMA multi-turn actuator SA10.2 Type: F10-B3-3Ph-400V-50Hz-32U/min-6-8-IP68-KS (See datasheet and description in project's attachment) B) JUMO NESOS R20 LT, Level transmitter via float (See datasheet and description in project's attachment) Key Requirements: - Design of an electric actuator motor control system - Send detailed BOM of parts which we need to buy - Send detailed instructions on how to install the parts and the system in general - Integration of a remote control functionality (Via smart life or any other internet-based method....

As per requirements, a Matlab/simulink model for dual axis solar tracking

...to create marketing campaigns and strategies that drive user acquisition and engagement. Experience in managing campaigns across social platforms like Twitter, Telegram, and Reddit. 3. Compliance Officer: Extensive knowledge of AML/KYC requirements for blockchain businesses. Experience ensuring compliance with regulatory requirements, including federal MSB registration and multi-state money transmitter licensing. 4. Chief Financial Officer (CFO): 2. Develop and implement effective fundraising strategies to secure additional capital. 3. Ensure accurate and timely financial reporting to stakeholders and regulatory bodies. 4. Conduct risk assessments and develop strategies to mitigate financial risks. 5. Oversee the allocation of budget to various departments and initiatives. 6. Cre...

I need an expert in microgrid stability to assess and enhance the stability margin of an inverter-based islanded microgrid. The project involves: - Developing a small signal model for a low voltage microgrid network, following a specified base paper. - Testing this system on the IEEE 33 bus. The ideal candidate will be proficient in MATLAB/Simulink and familiar with droop control strategies. The primary focus of this project is on voltage stability, so experience in this area is crucial.

...with PT2272 ensures reliable data decoding. Operating Voltage: Operates in the range of 4V to 15V, suitable for battery or AC-powered systems. Output Types: Supports latch or momentary modes, allowing versatile control based on the application. Applications: Remote control systems for home automation, industrial equipment, security systems, toys, and more. Designing Your RF Control System 1. Transmitter (Using PT2262): Address Pins: Configure address pins (A0–A11) using resistors or direct connections to Vcc, GND, or floating for unique device pairing. Data Pins: Connect up to 6 data pins (D0–D5) to the buttons or switches. Oscillator Resistor: Choose a resistor value for the oscillator frequency. This affects the transmission rate and should match the receiver. Mo...

...

I'm looking for an expert in control systems and Simulink to help me design a PID controller.

I'm seeking a Matlab/Simulink expert with a strong background in control system simulation and reinforcement learning, specifically Q-learning. The project involves linking AI (Python or Matlab code) with a Simulink model for control system simulation. Key Requirements: - Extensive experience with Matlab/Simulink, particularly in control system simulation. - Proficiency in Python and/or Matlab for AI integration. - Deep understanding and practical experience with Q-learning. - Ability to deliver the project within 5-7 days maximum. Before we begin, I would like to have an online meeting to discuss the project in detail.

I am looking for a group of networking and telecommunication expert to assis. I've got a couple of projects where I want you to assist me for completing my project. Requirement: 1. Needs to use matlab Programming for network architecture and simulation 2. Needs to do network authentication for 5G network 3. This is helping to reduce the cost of latency during the data transfer. 4. Needs to develop custom algorithms for optimal network performance. Deadline: 3-4 days The project will focus on signal processing. The custom algorithms required are related to the software program "matlab."

...diagnostic tools to monitor and adjust sensor performance dynamically during operations. Required Software and Tools Programming and Development: Python and C++: For developing AI and sensor calibration algorithms. OpenCV: For image processing and real-time video analytics. TensorFlow or PyTorch: For machine learning and deep learning-based target tracking models. Simulation and Analysis: MATLAB/Simulink: For sensor data analysis and simulation of tracking systems. ROS (Robot Operating System): For managing sensor integration and communication. Sensor Tools: LidarView or Point Cloud Library (PCL): For LiDAR data processing and analysis. RTKLib: For advanced GPS calibration and positioning accuracy. Testing and Validation: Tools like LabVIEW for real-time data validation and senso...

...effectiveness of guidance algorithms through real-world simulations. Required Software and Tools Aerodynamics and Simulation Tools: ANSYS Fluent: For computational fluid dynamics (CFD) analysis of airflow and drag. XFLR5: For airfoil design and analysis, particularly for propeller and wing optimization. OpenFOAM: For open-source CFD modeling and aerodynamic simulations. Flight Dynamics Modeling: MATLAB/Simulink: For creating dynamic models of drone and ammunition flight behaviors. SolidWorks Flow Simulation: For integrating aerodynamic simulations with mechanical design workflows. 3D Modeling Software: CATIA: For designing aerodynamic surfaces and verifying mechanical compatibility. Fusion 360: For rapid prototyping of aerodynamic components. Testing and Validation: Wind tunnel d...

...circuits to interface with onboard AI or remote systems for command-based detonation. Required Software and Tools Circuit Design and Simulation: Altium Designer: For PCB design and electronic circuit layout. KiCAD: For open-source circuit design and prototyping. LTspice: For simulating electronic circuit behavior. Power System Analysis: PSpice: For power system modeling and simulation. MATLAB/Simulink: For analyzing and simulating power distribution networks. Embedded Systems and Firmware: Arduino IDE or Keil: For testing microcontroller-based systems. Python or C: For developing control algorithms and testing hardware-software integration. Testing and Measurement Tools: Oscilloscopes, multimeters, and logic analyzers for circuit validation. LabVIEW: For automating hardware testi...

...CATIA: For advanced surface modeling and multi-disciplinary systems engineering. Fusion 360: For quick design iterations and collaboration on cloud-based platforms. Finite Element Analysis (FEA) Tools: ANSYS: For stress, thermal, and vibration simulations. Abaqus: For complex structural and dynamic analyses. Aerodynamic Simulation Tools: XFLR5: For airfoil and flight dynamics analysis. MATLAB/Simulink: For custom aerodynamic simulations and system modeling. Prototyping and Manufacturing: AutoCAD: For technical drawing and production planning. Cura or PrusaSlicer: For preparing 3D printing files for prototyping. PLM (Product Lifecycle Management): Familiarity with tools like Teamcenter or ENOVIA for managing design and production data. Additional Skills and Expertise Material Know...

I'm looking for an expert in mixed signal processing, specifically focusing on Modulation/Demodulation, for a telecommunication project. Key Requirements: - Deep understanding and practical experience in mixed ...mixed signal processing. - Proficient in modulation/demodulation techniques. - Able to work on a telecommunication signal processing project. The ideal freelancer should have a strong background in both digital and analog signal processing, with the ability to apply these skills in a mixed context. Experience with telecommunication projects will be a significant advantage. Preference for Matlab/Simulink for this project. The deliverable should include detailed simulation results. The expected project duration is not specified. The expected duration for this project...

I am seeking an experienced person for doing FIL (FPGA in the loop) simulation of a 3-phase grid-connected inverter system in Simulink, including a boost converter with P&O MPPT and DC-AC inverter with PWM generator and PLL. It is required to develop the Simulink model, run FIL simulations for the control part of the inverter, and determine the execution/processing time of the FPGA. Key Tasks: - Create the Simulink model - Execute FIL simulations focusing on the inverter's control system - Measure the execution and processing time of the FPGA - Validate the FIL simulation results against theoretical calculations. The simulations will be conducted using the Intel Cyclone V FPGA. The simulation results should include detailed performance metrics including vo...

I'm seeking an expert who can identify the transfer function from a Bode diagram, and design a P, Lead, and PID controller using MATLAB/Simulink for a second-order electrical system. Key Requirements: - Identify the transfer function from a provided Bode diagram. - Design three types of controllers: P, Lead, and PID. - Implement the designs in MATLAB/Simulink. The system will primarily experience a unit ramp input. Prior experience with electrical systems and controller design is highly desirable. Please provide examples of similar projects you have completed.

I'm looking for a professional with experience in MATLAB and Simulink to design and simulate a non-linear capacitor charging and discharging circuit with Fuzzy Logic Control. The main aim is to develop an optimized circuit for commercial purposes. Key Requirements: - Design and simulation of the circuit in MATLAB and Simulink - Implementation of Fuzzy Logic Control within the circuit - Detailed comparison between the output of a PID controller and the Fuzzy Logic controller - Focus on creating an efficient circuit, dynamic stability and dynamic response. Please note that the primary consideration for the circuit's performance is its efficiency. Your expertise in circuit design and control systems, particularly with Fuzzy Logic and PID controllers, will be crucial ...

Thesis Writing for Topic on Permanent Magnet Synchronous Motor Control using Model Predictive Direct Speed Control. The Thesis should include the following: 1- introduction. 2- Setup of experiment explanation. 3- Parameter tuning method used - Response optimizer app in Simulink. 4- PI + Model Predictive Current control Method. 5- Sliding Mode control Current Control Method - This section to include the principle of sliding mode control - the reaching law and the efforts to overcome the chattering effect. 6- Model predictive Speed Control Method + Sliding Mode Disturbance Observer. 7- Results comparison on different work operation conditions (Speed variance - Torque loading / unloading - Parameter Mismatch) 8- Comparing to other papers of the same topics. (Papers will be provided). 9...

I'm seeking a professional who can design a wireless transmitter for a miniaturized water pressure and temperature sensor (less than 1 mm long). The sensor needs to be integrated into a full Wheatstone bridge and likely requires an amplifier. Key tasks: - Design a circuit that reads signals from the sensor and calculates pressure and temperature. - Ensure data is wirelessly transmitted to a PC for real-time plotting using LabView. The transmitter will be battery-powered. The ideal freelancer should have: - Proficiency in circuit design and wireless communication. - Experience/Certification in LabView. - Knowledge of miniaturized sensor integration. Please note, I left the choice of wireless communication method open - I'm hoping for your expertise to guide this ...

Matlab Simulink Model and graphs as per video; It'll be shared within 30 mins.

I'm looking for an expert in Bluetooth technology and audio engineering to design a microphone-enabled Bluetooth transmitter. This device will primarily be used to send signals to a handheld device, specifically a smartphone. Key requirements include: - High proficiency in Bluetooth technology - Experience with audio engineering - Ability to design a device that can transmit to a smartphone Please note that the audio quality specifications are flexible and not strictly defined. Therefore, creativity and expertise in achieving the best possible audio quality, tailored for voice communication, gaming, and music streaming, will be highly valued.

...performance, specifically: -Reducing torque and flux ripples -Minimizing machine vibration and noise The ideal candidate will be responsible for developing a detailed Simulink model, incorporating all necessary components for both the DTC and CHB inverters. I will provide my existing DTC model and a relevant research paper that outlines the new method to serve as references. Key Requirements: -Effective implementation of the CHB multilevel inverter within the DTC model -Creation of a detailed Simulink model with intricate component modeling Candidate Profile: -Deep understanding and expertise in drive control systems -Proficiency in Simulink and control modeling for induction machines -Prior experience with multilevel inverters and direct torque control is cruci...

I'm looking for a skilled professional to modify the Ardupilot's auto mode for me. The goal of this modification is to allow altitude adjustments via my RC transmitter based on my personalized preferences. Key Requirements: - Modify the Ardupilot's auto mode to allow height adjustments via RC - Prioritize ease of use in the modifications Ideal Skill Set: - Proficient in Ardupilot software - Experienced in RC flight systems - Excellent understanding of flight control systems - Able to customize and simplify complex systems for user-friendly operation

I'm looking for an experienced MATLAB/Simulink professional to create a finite state machine for a vacuum robot. The robot needs to perform multiple actions such as obstacle avoidance and room mapping, as well as basic movements like rotating, moving forwards and backwards, and moving backwards. Key requirements: - The state transitions of the robot should be primarily automatic and based on the input from sensors. - The robot should be designed to utilize bump and cliff sensors for its interactions with the environment. - The creation of different cleaning modes is also needed. This is a simple project that only requires a simulation Ideal candidates should have a strong background in control systems and robotics, and specific experience with Simulink and MATLAB. Prev...

Differential Equations System Optimization I'm looking for an expert in differential equations to help me with system optimization and behavior analysis. The project primarily involves: - Solving differential equations to optimize a system - Analyzing behaviors based on the solutions Experience with differential equations and system optimization is a must. It shows four-equation model that couples fluid dynamics with the structural behavior of a pipe, particularly focused on the axial coupling between liquid flow and pipe vibrations CAD MODEL ✓ ANSYS fluent ✓ ABACUS ✓ COMSOL multiphysics ✓ MATLAB Which software do you know? You think for this project will be suitable? If you think you can solve the task. Please ask for the requirement file.

I have a project I need to get done in Simulink. If you are an expert in Simulink, please apply for this job and send you the document

I'm seeking an intermediate Matlab Simulink expert to assist with a PV project simulation. Key Tasks: - Model for off-grid - Model faults specifically in solar panels - Diagnose faults as they occur - Simulate degradation over time in inverters - Renewables Ideal Skills: - Proficiency in Matlab Simulink - Experience with photovoltaic system simulations - Ability to model and diagnose faults - Knowledge of inverter degradation over time

I am seeking an expert in MATLAB's Simulink for a lab project focused on simulating an electrical system. Key Responsibilities: - Use MATLAB Simulink to create a model of an electrical system. - Conduct simulations to test various scenarios and system behaviors. Ideal Skills and Experience: - Highly proficient in MATLAB and Simulink. - Prior experience with simulating electrical systems is a must. - Strong understanding of electrical components and systems. - Excellent problem-solving skills to interpret simulation results and suggest improvements.

I need a Matlab Simulink expert to assist with the simulation and modeling of dynamic marine systems. The project is focused on creating detailed and accurate models to understand the behavior and characteristics of various marine systems. you need to develop mathematical models, block diagrams and to make Simulink simulation program/s for dynamic systems Key Requirements: - Proficient in Matlab Simulink with a strong background in simulation and modeling. - Previous experience working with marine systems is highly desirable. - Able to create and interpret complex models of dynamic systems. The goal of this project is to provide a comprehensive understanding of marine dynamics through detailed simulation and modeling. Ideal freelancers for this project should be able...

...interface that can connect with onboard systems and provide flexible input options for different mission profiles. Testing & Validation: Validate MPM integration with GNC modules and confirm data accuracy through simulated testing. Technologies: Microcontroller: Arduino Uno/Pro for prototyping, transitioning to a microcontroller compatible with RTOS in the final design Programming Tools: MATLAB/Simulink for code generation, Arduino IDE, and embedded systems IDEs Hardware: Basic I/O interface (LCD or keypad) for direct mission parameter input, optional data link setup for dynamic updates CAD Software: SolidWorks, AutoCAD, or similar CAD software for designing the modular hardware system Project Tasks and Milestones: Milestone 1: System and Software Architecture (15%) Task ...

...objectives and environmental factors. Data Communication: Define a protocol for exchanging trajectory and adjustment data with the Navigation and Control systems. Prototype Testing: Validate the accuracy and reliability of the Guidance system in achieving various mission objectives through simulated testing. Technologies: Microcontroller: Arduino Uno/Pro for initial testing Programming Tools: MATLAB/Simulink for code generation, Arduino IDE Algorithms: Trajectory planning, path optimization, and error correction Project Tasks and Milestones: Milestone 1: System and Software Architecture (15%) Task 1.1: Develop a detailed system architecture for the Guidance System, including its interaction with Navigation and Control. Task 1.2: Design the software architecture, detailing mod...

...for sensor fusion and calibration. Data Communication: Implement a data exchange protocol to send positioning and orientation information to the Guidance and Control systems. Prototype Testing: Validate the Navigation system’s accuracy and reliability through simulated and practical testing scenarios. Technologies: Microcontroller: Arduino Uno/Pro for initial testing Programming Tools: MATLAB/Simulink for code generation, Arduino IDE Hardware: IMU, GPS module, accelerometers, barometer (optional for altitude), and other sensors as needed Project Tasks and Milestones: Milestone 1: System and Software Architecture (15%) Task 1.1: Design a detailed system architecture for the Navigation system, defining data flow and interaction with the Guidance and Control systems. Task ...

I need an Intermediate-level Simulink model of an AM Transceiver designed for an educational demonstration. Key Components: - The model must include a Modulator and Demodulator, Signal Amplifiers, and Noise Filters. - The design should provide some real-world features, but not be overly complex. Ideal Skills: - Proficiency in Simulink is a must. - Prior experience in designing communication systems will be highly beneficial. - Understanding of the key components of an AM Transceiver is essential. I am looking for a freelancer who can create a detailed yet comprehensible model suitable for educational purposes. Please ensure you're able to illustrate the function of each component and the overall system in a clear and engaging way.

...systems to adjust fin/vein positions dynamically. - Embedded Code Development: Use MATLAB/Simulink for embedded code generation. - Hardware Interface Design (MODULWA): Create a CAD design of the hardware module interface to connect stepper motors, power systems, and other integrated systems. - Testing & Validation: Validate prototype functionality, including stability control and actuator responsiveness. After successful testing of the initial prototype, we may continue to develop this system further. However, the first objective is to evaluate the fully working prototype to confirm its performance. Technologies: - Microcontroller: Arduino Uno/Pro for initial testing - Programming Tools: MATLAB/Simulink for code generation, Arduino IDE - Hardware: Stepper motors for...

I am in need of a control system to be designed for certain mechanical engineering applications, using MATLAB Simulink. The control system's specifics and applications can be elaborated upon later. Key Requirements: - Design of a control system applicable to mechanical engineering - Use of MATLAB Simulink for the design - Implementation of PID control and Adaptive control techniques Ideal Skills and Experience: - Proficient in MATLAB Simulink - Strong background in mechanical engineering - Experienced in control system design - Knowledgeable in PID and Adaptive control techniques

Tafadhali Jisajili ama Ingia ili kuona maelezo.

I'll design and simulate the PID loop controling a temperature valve and analyse /interprete the results using two methods as discussed in chat. Thanks

This is a freelancer and part-time remote role for a Paper and Thesis Writer. The Writer will be responsible for cond...research: Finite Control Set of Model Predictive Direct Speed Control on PMSM with Sliding Mode Disturbance Observer for Load Torque Estimation. Finite Control Set Model Predictive Speed Control Using Sliding-Mode Control for PMSM. Qualifications Master's or PhD in Electrical Engineering Have Experience in Electrical Machines, Control, PID and Model Predictive Control Have Experience with MATLAB and Simulink Research, academic writing and formatting, and Editing skills Strong attention to detail and ability to meet deadlines Excellent written and verbal communication skills Ability to work independently and collaboratively Proficiency in MS Word and other re...

I am looking for an experienced Simulink expert to designing and simulating system. The project is of intermediate-expert complexity and needs to be completed in less than a week. Skills and Experience: - Proficient in Simulink - Matlab software - Strong understanding of battery, especially vanadium redox flow battery - Ability to work within tight deadlines The ideal candidate should have a solid background in sizing, electrical system and be able to effectively use Simulink to design and determined sizing of the VRFB . Strong time management skills and attention to detail are crucial for completing the project within the given timeframe.

I am seeking an experienced MATLAB Simulink engineer to set up a simulation for a Fuzzy Logic Controller (FLC) based Direct Torque Control (DTC) of an Induction Motor. Key Requirements: - Extensive experience with MATLAB Simulink, specifically with the SimPowerSystems toolbox. - Proven track record of setting up complex simulation setups. - Familiarity with Induction Motor models and their parameters. The main focus of the project will be to create a simulation setup in SimPowerSystems for the induction motor. It is crucial that you have a deep understanding of the parameters and behavior of induction motors in a simulated environment. Please note that the project does not currently require the inclusion of a power electronics converter or sensors and measurement blocks. ...

...in the drone should be low-cost, without compromising on quality. - The drone should have a battery life of at least 20 minutes to ensure sufficient flight time for capturing landscapes. - The drone should include a reliable GPS system for precise positioning and navigation. - The drone should feature an obstacle avoidance system to prevent collisions during flight. - The drone should have a transmitter range of at least 3 kilometer to allow for distant aerial photography. - The drone should include a 2-axis gimbal for the camera to further ensure smooth footage. - The drone should have a payload capacity sufficient to carry the camera and any additional equipment. - The drone should have a foldable design for easy portability. - The drone should be easy to set up and operate, ev...

Objective: Implement the stabilization of a simple electrical grid in Simulink using fuzzy logic. Requested: -Simulink program -Report 3 to 5 page where we have to see the mathematical model of the electricity grid and the interpretation of the results the project has to be as simple as possible. Stabilization: The goal is to stabilize voltage, frequency, or reactive power in response to disturbances. Using fuzzy logic: Implement a Fuzzy Logic Controller (FLC). The FLC will take inputs such as voltage/frequency variations and output adjustments to a voltage or frequency regulator. Create fuzzy rules to control the network's parameters. Example: Stabilize the voltage by measuring the deviation from a reference voltage and adjusting a voltage regulator through...

I am looking for an experienced professional in power electronics with a focus on inverters, specifically three-phase inverters. The project involves implementing an ieee paper in simulink/PLECs. I have attached the paper to be implemented. Results should match as per the paper.

I'm seeking a professional with expertise in MATLAB Simulink to develop a Fuzzy Logic Controller (FLC) based Direct Torque Control (DTC) model for an induction motor. The primary goal of this project is to minimize torque ripple. Key requirements for the project include: - Designing a Simulink model that incorporates a Graphical User Interface (GUI) and supports Real-time simulation. - Adhering to IEEE standards throughout the design process. Ideal candidates for this project should have: - Extensive experience with MATLAB Simulink and control systems. - A strong understanding of induction motors and torque control. - Familiarity with IEEE standards. - Ability to create intuitive and functional GUIs in Simulink.