Qpsk transmitter and receiver simulinkKazi

...designing a drone that includes a transmitter and receiver. The project involves creating a modulator for the transmitter capable of encoding data using the Amplitude Shift Keying (ASK) modulation scheme. Key project components include: - The data will be sourced from an Arduino in binary form and needs to be modulated with a sine wave for transmission. - The drone will communicate its speed to a controller. - An analysis of the characteristics of both linear and non-linear amplifiers through a modulator at the transmitter end. Ideal skills for this project: - Proficient in circuit design and PCB creation. - Experience in working with Arduino and drone technology. - Knowledgeable in both linear and non-linear ampli...

Netflow project milestone first for the following project completed (1) Add dynamic and adaptive modes (2) Add covert communication channel through flow warden between covert sender ,covert receiver. (3) Repeat point 2 for packet warden and NEL phase env covert sender and receiver. (4) Take sample measurements to validate your modifications (5) Create a detailed documentation of work done so far relating to flow warden until now. First milestone payment is 650€ and second milestone payment is 600€ making a grand total of 1250€

Synchronous Generator Modelling and Simulink Implementation

This project proposes the design and implementation of a Model Predictive Control (MPC) framework for an energy system comprising batteries, a fuel cell, an electrolyzer, and a hydrogen tank. The goal is to maximize profits by optimizing energy flows while meeting operational constraints and responding to external disturbances such as grid pricing and renewable energy variability. The project will be developed and simulated using MATLAB/Simulink. 1. System Overview The energy system under consideration consists of: • Grid Connection: Allows for buying and selling energy. • Battery Storage: Acts as a short-term energy buffer. • Fuel Cell: Converts hydrogen into electricity during demand peaks (Smooth behavior) • Electro...

...that involves working with electric motors and simulations. Here's what needs to be done: Motor Control: Find a way to avoid high current in low-speed motors, especially when adjusting voltage. You’ll need to explain the challenges with this and back it up with research. Simulation: Use MATLAB/Simulink to create a simulation showing how the motor performs at different speeds (15, 30, 50, 65, 80 Hz). Then, explain the results. Equipment Selection: Choose the right equipment and methods to get the motor's performance at different speeds (15, 30, 50 Hz), using two types of control (V/f and V/f2). Discuss the results and any issues with the methods. Torque and Power Curves: Based on the motor data, create charts showing ho...

I'm seeking an experienced developer to create a Telegram chat bot that uses Asterisk. The bot should be able to make calls, capture DTMF tones, and spoof caller IDs. It should also read custom text to the receiver of the call and be capable of placing calls from a spoofed number. Key features should include: - Making calls - Capturing DTMF tones - Spoofing caller ID The bot will only run on the Telegram platform, specifically as a chat bot. The ideal candidate should have: - Extensive experience with Asterisk - Proficient in developing Telegram bots - Strong understanding of DTMF tone capture - Ability to implement caller ID spoofing - Experience with text-to-speech technologies

I need assistance renaming a Bluetooth receiver connection for a speaker system. The purpose of this renaming is for branding purposes, specifically to incorporate our company name into the Bluetooth connection. Ideal Skills and Experience: - Knowledge of Bluetooth technology and speaker systems - Experience in branding and marketing - Attention to detail - Technical skills for implementing connection renaming - Creativity for potential custom naming strategies Rename QCC3034 bluetooth module, bluetooth finding name to specific name.

I'm looking for an experienced engineer to design a 27Mhz transmitter and receiver system for me. This system needs to work effectively in an urban environment and achieve long-range transmissions of up to 5-10km at a speed of 100bps. Key specifications: - The sleep current must not exceed 100uA to ensure power efficiency. - The data will be transmitted in binary format and needs to be sent & received through an Arduino microcontroller. - transmitter Power should be less than 1 watt. Ideal skills and experience for the job include: - Proficiency in radio frequency engineering. - Extensive experience with Arduino and microcontroller programming. - Knowledge of binary data encoding and transmission. - Ability to desig...

Experiencing a frustrating 'no signal' issue with my Dish Network setup. All common culprits checked, need professional assistance to pinpoint the problem. Ideal Skills and Experience: - Expertise in Dish Network systems - Proficient in troubleshooting TV cable issues - Experience with cable connections, Dish alignment, and Receiver settings

I am working on a Simulink project focused on communication systems, specifically MIMO channel modeling. The project involves understanding communication channels and implementing various transmission and reception techniques. Key Aspects of the Project: - MIMO (Multiple Input Multiple Output): This is the primary focus of the project. Understanding and implementing MIMO techniques is crucial. - Channel Modeling: The project requires in-depth modeling of MIMO channels. - Communication Systems: A solid understanding of communication systems is necessary to effectively work on this project. Ideal Skills: - Extensive experience with Simulink - Proficiency in MIMO techniques - Strong background in communication systems - Experience with channel modeling T...

I am looking for a professional...Specifically, I need help in MTPA Strategy using Model Predictive Control for optimizing the performance of permanent magnet synchronous motor (PMSM) drives using MATLAB Simulink. Key Requirements : 1)Results required Of three Phase currents with and without MTPA, With considering Iron Losses and Without considering Iron Losses. 2) Results Required of Electromagnetic Torque with and without MTPA, With considering Iron Losses MTPA and Without considering Iron Losses MTPA. 3) Motor Speed results perfectly tracking the Reference speed 4) D-Axis and Q-axis Results Required with and without MTPA, With considering Iron Losses MTPA and Without considering Iron Losses MTPA. NOTE: The Results of Consideri...

I'm in need of a seasoned 3D Mechanical and Electrical expert who is proficient in SolidWorks and MATLAB/Simulink. The project involves drawing and designing, as well as simulating and troubleshooting a dual system. The ideal candidate will also be responsible for revising and refining the design for final approval. Key Responsibilities: - Drawing and designing both mechanical and electrical systems - Simulating and troubleshooting during the design process - Revising and refining designs based on feedback Skills and Experience Required: - Extensive experience with both mechanical and electrical systems - Proficiency in SolidWorks and MATLAB/Simulink - Strong troubleshooting skills - Ex...

I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows fo...code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technolog...

...a large text-based PDF file containing phone and text records that needs to be converted into Excel spreadsheets. Project Details: 1. Conversion of the PDF into XLS. 2. Creation of a separate spreadsheet for calls to and from one specific number to another specific number. 3. Creation of a spreadsheet for texts to and from one specific number to another specific number. 4. Compilation of a spreadsheet with all text messages between a different set of numbers. For the Phone Calls Spreadsheet, please include: - item number - Call date and time - Call duration - Caller and receiver numbers - All other metadata provided For the Text Messages Spreadsheet, please include: - item number - Message date and time - Message content - Sender ...

...options for cash and credit bookings. - **Receipt Generation**: The software should enable generation and printing of receipts. These receipts should include fields such as sender/receiver details, tracking ID, courier service used, weight, freight charges, GST, and total amount. - **Database Management**: It should have the capacity to store customer details, booking history, and pending payments. - **Automation**: This feature should include auto-fill options for repeat customers and drop-down menus for courier services and destination cities. - **Reports**: Ability to view pending payments and booking summaries. The software should be lightweight, user-friendly and if possible, within my limited budget. Please make sure ...

I'm embarking on an exciting journey to establish a new Christian radio station and I'm in need of a professional broadcast engineer to help bring this vision to life. This project involves setting up the transmitter, installing audio equipment, and configuring the antenna and signal. Key Responsibilities: - Assisting with the transmitter setup - Installing audio equipment - Configuring the antenna and signal Ideal candidates should have: - Extensive experience in radio broadcast engineering - Proven track record in setting up new radio stations - Strong understanding of audio equipment and transmitter setup - Ability to ensure high quality signal and sound Your expertise can help spread a positive message to many...

I need assistance connecting my stereo receiver to my television via Optical Audio. The primary purpose of this setup is to enhance my home theater experience. Ideal Skills: - Experience with home theater system installation - Proficiency in audio/video equipment connections - Knowledge of using Optical Audio connections Please note, I may want to connect additional devices like a Blu-ray player or gaming console in the future. Experience with this is a plus.

... 2. RF Receiver Testing and RF Signal Generation: Three independent RF transmitters capable of generating radio frequencies within the range of 2110–2170 MHz at 20W, with modulation control. 3. Connection and Configuration: Accessible configuration via RS485 communication port. General Specifications: 1. Ports and Interfaces: Three 10G Ethernet ports with physical SFP+ cages for module connection. One RS485 communication port. One MDR 26-pin SCSI Servo Connector (welded plate, female). 2. RF Signal Generators: Three independent RF generators with the following specs: Frequency range: 2110–2170 MHz Output power: 20W Controlled via a NodeMCU or equivalent. 3. Controller: The system controller can utilize a NodeMCU or similar...

I'm looking to control Liquid Cryogenic Fluid Pumping System, using a Schneider electric Machine Expert and Viso Studio for HMI. The system should monitor and log temperature, pressure and flow rates. Prove safety interlocks and shutdowns. The Liquid Cryogenic Fluid Pumping System takes liquid cryogenic fluid from a vertical tank and supplies the user with vaporized gas at two pressures (high and Low). Pressure is supplied via two 60 hp pumps (P1 / P2) with only one operating at a time. High pressure liquid is fed through an ambient vaporizer with low temperature protection applied downstream. The resulting high-pressure gas is fed to a distribution manifold where gas is fed to either a mid-pressure storage tubes or a high-pressure storag...

I'm seeking a competent professional to create a comprehensive database for my cargo service. This database should be accessible from tablets, desktops, and mobile phones. It needs to capture sender and receiver details, items, charged amounts, terms and conditions, and provide the option for customer signatures. just we required to replace the paper receipts and manual entries Key Features: - Fully functional database capable of handling all cargo service details - Accessible from tablets, desktops, and mobile phones - Option for customer signatures - Secure with Two-factor authentication I'm not certain about the best type of Database Management System to use, so I would appreciate your recommendations. Skills in SQL-based sys...

...assess the vehicle's performance, efficiency, and structural integrity before production. Responsibilities: Build a 3D simulation model of the electric vehicle, incorporating components like the robust chassis, battery system, and minimalistic design. Simulate the vehicle’s handling, battery performance, energy efficiency, and driving dynamics on various terrains and under different environmental conditions. Conduct performance analysis, including power consumption, range, and energy recovery during braking. Work with the design team to refine the vehicle’s performance based on simulation feedback. Provide detailed reports with insights and suggestions for design improvements. Skills Required: Proficiency in EV simulation sof...

I'm seeking an e...seeking an expert in both PSCAD and MATLAB (SIMULINK) to convert an entire Power Electronics project from PSCAD to MATLAB (SIMULINK). The primary aim of this conversion is to enhance simulation accuracy. Key Requirements: - Complete conversion of project to MATLAB - Ensuring high fidelity in simulation accuracy compared to PSCAD - Equivalently recreating custom components in MATLAB from PSCAD Ideal Skills: - Proficiency in PSCAD and MATLAB (SIMULINK) - Strong understanding of Power Electronics - Experience in creating and using custom models in both platforms This project requires careful attention to detail to ensure the converted project retains the same level of performance and precision as the original. Please ...

...receiving the constant numbers Lr, Ls, Rs, Lm, sigma related to a given motor and the desired range of rotor resistance Rr, selects the best K and indicates the changes in the range Rr and K on the graph and the convergence is clear in it. K is the system feedback, which is predicted in a robust control. Simulink can also be used. The Hanso MATHLAB program, which is in the attachment, can be used for help. Full program description and diagrams are required. Key tasks: - Develop a MATLAB program to solve various equations of state - Implement vector control for motor drives Ideal skills and experience: - Proficient in MATLAB programming - Strong background in Electrical Control Systems - Experience with motor drives and vector co...

I need design & simulations for a 2wire & 3wire current loop transmitter using XTR115 . the sensor input is 0 - 24V ouput should be 4-20mA Key Requirements: Simulations : - I need circuit & simulation of the design in Altium or LTspice I am looking for someone who can complete this project ASAP, given the urgency. Please only apply if you have relevant experience and can deliver high-quality work quickly.

...someone who can work with existing code and can deliver error free and perfectly working code quickly and completely. Entire task has to be completed and tested within 5 days of award. Work involves modifying existing Braintree payment module so that its is replaced with Paypal's Braintree SDK. The solution has to work with current API integration. Developer is expected to test thoroughly before handing over code. Freelancer/ developer must have prior experience with this type work. Must be able to work with phpmyadmin and FTP. NO CONTROL PANEL ACCESS WILL BE PROVIDED. Hourly Rate is Rs.575 per hour ONLY and will be based on actually delivered code and not just on hours. How freelancer will be paid : Developer to estimate ho...

...existing code and can deliver error free and perfectly working code quickly and completely. Entire task has to be completed and tested within 5 days of award. Work involves modifying existing Braintree payment module so that its is replaced with Paypal's Braintree SDK. The solution has to work with current API integration. Must have done this type work before Must be able to work with phpmyadmin and FTP. NO CONTROL PANEL ACCESS WILL BE PROVIDED. Hourly Rate is Rs.575 per hour ONLY and will be based on actually delivered code and not just on hours. Payment model is for developer to estimate task hours for each task and this will be converted to milestones. Developer is expected to test thoroughly before handing over cod...

I'm seeking an audio technician to assist in setting up a high-fidelity stereo system in my home. The system will include speakers, an amplifier/receiver, and a turntable. Ideally I would also link this with my TV to have surround sound. Key Responsibilities: - Advise what wires need to be bought (have inherited the system), all power cables already here but connected speakers / amp / sub woofer etc, missing most of these I think - Assist with the installation and setup of the audio system - Ensure all components are properly connected and functioning - Provide guidance on optimal speaker placement for sound quality Ideal Skills and Experience: - Proven experience in audio engineering or a related field - Prior experience with high-fidelity stere...

I need a project focusing on the charge/discharge cycles of electrochemical batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Ability to perform complex calculations Experience: - Prior experience with modeling or simulating battery systems - Familiarity with academic or engineering projects focused on battery performance

I need a tech-savvy individual to help me connect my old audio equipment. This includes a stereo receiver, floor-standing speakers, and a phono. Ideal Skills: - Audio equipment setup - Knowledge of vintage gear - Troubleshooting Please bid if you are an audio enthusiast with experience in setting up vintage audio systems.

I'm conducting academic research that involves a Simulink simulation of a parallel LC resonant converter for Induction Heating. The circuit and values for the capacitor and inductor in the resonant tank are provided. The project requires the MOSFETs to be working in pairs as it is a full bridge. Key Requirements: - Measurement blocks for the current on the inductor and the voltage passing through the capacitor - Selection of appropriate values for the MOSFETs, pulse generators and the voltage source - Demonstration of the effect of before and after using the ZVS/ZCS on the MOSFETs through graphs - Proper value selection for the matching inductors - Conducting open-circuit and closed-circuit tests by adding a resistor and display...

I need someone to zoom in on this photo and get the tracking number. Receiver is claiming this was not received.

I'm in need of a seasoned MATLAB and Simulink specialist who can assist me with a project involving the design and development of a 20kV and 50kHz system for generating RF Cold Plasma. Key Responsibilities: - Create a comprehensive simulation of the system in Simulink - Ensure the simulation accurately reflects the intended circuit design Ideal Skills and Experience: - Proficient in MATLAB and Simulink - Prior experience with RF Plasma simulation preferred - Strong circuit design understanding - Excellent analytical skills for interpreting simulation results

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentiall...

I'm looking for an expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary...expert in MATLAB to create a simulation for a 3-4 Degree of Freedom (DOF) robotic arm. Key Aspects: - The primary purpose of this project is educational, so the simulation should be designed with a focus on teaching and demonstrating robotic arm principles. - The simulation should be accurate in movement. Ideal Skills: - Extensive experience with MATLAB - Background in robotics - Teaching experience or understanding of educational software design Please note that the project may involve some back and forth to ensure the simulation meets educational standards, and your patience and ability to communicate complex concept...

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentiall...

I am seeking a professional skilled in Matlab Simulink with experience in designing and simulating robotic arms. The project involves creating a detailed simulation of a robotic arm, and potentially developing it for a specific application in industrial automation, educational purposes, or research and development. The project involves: - Designing a robotic arm in Matlab Simulink Plus Arduino - Simulating its functionalities such as gripping, lifting, and precision movements - Potentially applying it to industrial automation or educational purposes Ideal candidates will have: - Extensive knowledge of Matlab Simulink - Experience in designing and simulating robotic arms - Ability to create detailed simulations and potentiall...

Project Name: Design, Programing and simulation of a 3-4 DOF robotic arm using simulink and arduino Software: Matlab Simscape Hardwares (I Have): 1) arduino mega 2560 r3 2) servor mg90s 3) 1.5v - 6v r300c mini dc motor rpm3500 4) sg90 micro servor motor 9g(360°) 5) dual channel motor driver modul L298N H-bridge 6) jumper wire cable 7) breadboard 8) robotic arm kit 6dof Deadline 2 days $20 nzd

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and...

...professional to design, program and simulate a 3-4 Degree of Freedom (DOF) robotic arm using Simulink and Arduino. The primary application and specific tasks for the robotic arm have not been defined yet, and I am open to suggestions based on your expertise. This project will require you to demonstrate creativity and engineering skills in developing a versatile robotic arm. Key Tasks: - Design a 3-4 DOF robotic arm - Program the arm using Arduino - Simulate the arm using Simulink - Suggest and implement potential applications and tasks for the arm - Provide comprehensive documentation of the design and programming process The ideal freelancer for this project should have: - Extensive experience with Arduino and...

...developers, you can read more about the survey here: Stack Overflow Developer Survey 2024. The dataset can be downloaded from the stack overflow CDN and imported into Kaggle: The following tasks are required in the coursework. (1) Implement exploratory data analysis and gain an understanding of the data set and its features. These concepts will be covered as part of the module content. 2) Implement cluster analysis and understand the characteristics of developers in each cluster. 3) Implement classification and build machine learning models for predicting whether a developer is in high income (compensation) based on developers’ information. Note: for developers

I need a model in MATLAB that helps optimize processing p...helps optimize processing parameters by simulating the behaviour of a heat transfer and processing plant system. Specifically, I want to focus on: - Temperature distribution: Understanding how heat is transferred and maintained throughout the system will be crucial for optimizing processing parameters. - System efficiency: We need to be able to assess how changes in processing parameters affect the overall efficiency of the system. This also includes system starting sequence and time to obtain optimal working parameters (equilibrium state). Ideal freelancer for this project should be proficient in MATLAB and have strong experience in modelling and optimization in thermal and processing ...

Monitor ton and usdt token transfers greater than 100ton/500usdt on the ton chain, and record the amount between the sender (A) and the receiver (B) Then generate a wallet address and private key (C) with the same first 3 and last 4 digits as the recipient, and use the master wallet to issue 0.03ton and 0.1usdt to the generated wallet address. If (a) and (b) are trading in ton , then (c) address transfers 0.0000000001ton to (a) address. If it is 500usdt, then transfer 0.05001usdt. This project needs to be recycled. The collected address first checks whether the address generated in history has a matching (c) address. If there is a database, there is no need to generate it. Just execute the transfer request.

To help in developing a custom Battery Management System (BMS) for electric vehicles, adhering to IEEE P2686 standards. The project involves advanced modeling, simulation, and report preparation, requiring a deep understanding of battery systems, MATLAB/Simulink, and automotive standards.

I am looking for a skilled professional to handle the following task: • Download all content from the Arabic Toon website (movies, series, and programs) for personal use only. • Organize the content in a structured, user-friendly way (similar to a video library or receiver system). • Provide a solution to easily watch the content on TV or other devices. Requirements: • Download high-quality content and organize it systematically. • Create a system or technical solution that allows easy access and playback of the content. Please include the following in your proposal: • Estimated cost. • Time required to complete the task. Thank you, and I look forward to hearing from you.

I'm seeking a skilled freelancer who can design a standalone, wireless GSM Data receiver hardware. This device will interface with various ATM/POS machines to receive and store data. Key Responsibilities: - Develop a GSM Data receiver capable of connecting with any ATM/POS machine - Ensure the device is standalone and wireless - Design the necessary software for data reception and storage Ideal Skills and Experience: - Proven track record in creating GSM Data receiver hardware - Familiarity with ATM/POS machine connectivity - Expertise in developing standalone devices - Proficiency in data storage and retrieval - Extensive knowledge of GSM technology and protocols Please note, the device should be able to connect wirele...

I'm looking for a f...joint motion. Each of the arm's 13 joints will be equipped with a DC motor control circuit, following a provided schematic. The shoulder, elbow, and wrist joints can move up and down, while the fingers are limited to gripping motions. Start your proposal with AOA and plz keep it short. Key Responsibilities: - Customize existing polynomial trajectory blocks to adjust joint angle limits. - Setup for testing joint angles (q) without considering velocity (qd) or acceleration (qdd). Ideal Skills and Experience: - Proficiency in MATLAB Simscape Multibody. - Previous experience with polynomial trajectory blocks. - Understanding of robotic arm dynamics and control systems. - Ability to follow schematic diagrams for DC motor contr...

I'm currently working on a flight dynamics project analyzing the longitudinal dynamic stability of a conceptual aircraft design. I've run into some issues with my Simulink model, specifically with parameter configuration and Simulink inputs. I need assistance troubleshooting these issues and completing the task. - Must be available on chat for approximately 4 hours. - Ideal candidate will have access to R2024a Matlab, a thorough understanding of flight dynamics and aerodynamics, as well as professional Simulink skills. -Trimming on simulink. Please only bid if you're satisfied with the time, price, task, and availability.

I'm in need of a skilled professional to assist me with a Simulink model that won't run. The task involves conducting a longitudinal dynamic stability analysis of a conceptual aircraft design over approximately four hours. I'll be available for the entirety of this task and will require your assistance in navigating through Simulink, identifying the issue with the input parameters, which represent M and thrust (T), and finding a solution. Requirements for this project include: - Access to R2024a version of Matlab - Thorough understanding of flight dynamics, aerodynamics, and 1st and 2nd order differential equations - Professional experience with Simulink *Please only bid if you are satisfied with the time, price, t...

...assessing the candidate's capability for extensive testing and validation of automotive systems. Key Responsibilities: - Conducting a technical skills interview focused on functional testing of automotive components and systems. - Evaluating the candidate's proficiency in using automotive testing tools such as CANoe, NI LabVIEW, and MATLAB/Simulink. - Assessing the candidate's understanding and knowledge of important automotive industry standards and regulations like ISO 26262 and SAE standards. Ideal Skills: - Expert-level knowledge and experience in functional automobile testing. - Proficient in using automotive testing tools (e.g., CANoe, NI LabVIEW, MATLAB/Simulink). - In-depth understanding of automotiv...

I'm in need of an expert who can create a moderate detail CAD model of a mechanical component, import it into Matlab, and then conduct a simulation using Simulink/Simscape. The goal is to complete this task within a week. Ideal Skills and Experience: - Proficient in CAD software - Experienced in Matlab, Simulink, and Simscape - Able to deliver within tight deadlines - Good understanding of moderate detailing in CAD models Please note, the specific features of Simulink/Simscape to be used for the simulation have not been determined yet. However, a general understanding of these tools and their capabilities will be beneficial.