Esp8266 wifi hotspotKazi

Computer Repairing In Mumbai, Mumbai, Navi Mumbai & Kalyan Suyash Computer Provides Door to Door Step Servicing of Computer • Computer Repairing • Servicing • Networking • Wirel...Wireless Router Installation • Laptop Hard Disk Replacement, • Laptop Screen Changing, • Battery Replacement, • Laptop Keyboard Change • Data Recovery • Printer Repairing • Operating Installation • Trouble Shooting • Virus Problem Solution • Annual Maintenance • Data Backup /Restore • System Optimization • Buying /Selling Old / New Computer • Second Hand Computer Sales • Wired / Wifi Network Setup. • New / Second PC Sales. Office Address : Shop No- 5, Raj Dulari Bhavan, S...

معلومات عن برنامج : Hotspot Shield 1.47 برنامج هوت سبوت شيلد

...smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities. Testing and Optimization: Ensure the system runs efficiently without buffering issues and provide debugging support for smoo...

Tafadhali Jisajili ama Ingia ili kuona maelezo.

I'm looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and use alternative libraries or frameworks.

...smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities. Testing and Optimization: Ensure the system runs efficiently without buffering issues and provide debugging support for smoo...

...smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities. Testing and Optimization: Ensure the system runs efficiently without buffering issues and provide debugging support for smoo...

I'm looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and use alternative libraries or frameworks.

I'm seeking a creative designer to craft a retro-styled, vibrant logo for our client, Hot Wheels Hotspot. The logo should feature a fun, flashy, sports car and incorporate bold and vibrant colors. Importantly, the design should NOT include the Hot Wheels flame or any existing logo elements. Here is an example of what we are looking for minus the hotwheels flame Key Requirements: - Design a retro-inspired logo without the Hot Wheels flame - Incorporate a sports car into the design - Use bold and vibrant colors - Include text within the logo Ideal Skills and Experience: - Proven experience in retro-style design - Strong understanding of using bold and vibrant colors - Excellent skills in logo design and typography - Ability to create playful, engaging designs

I am looking for someone who can carry out functionality testing for a device built on Espressif's ESP32/ESP32-S2/ESP32-S3. It can be controlled via a mobile app or a game controller over a Wifi network. Key aspects of the project include: - Testing the ease of control via the mobile app - Assessing the responsiveness to the game controller - Testing that the esp32 drone code actually works - using basic components to test functionality. For example testing on LED's for each motor. - Test PCB Gerber files online as well The ideal freelancer for this project should have: - Experience with Espressif esp drone - Extensive experience in functionality and usability testing - A strong understanding of ESP32 technology - Proficiency in evaluating mobile applications and game ...

I am working on a battery-powered soil moisture sensor project. Currently, I have a prototype using an ESP8266 and a soil moisture sensor. The final device should meet the following requirements: Power Source: Utilize a 18650 lithium-ion battery for power. Data Reporting: Send data to a specified URL ({sensorId}/{secretToken}/{moistureLevel}/{temperatureLevel}/{batteryLevel}) at hourly intervals. Setup and Configuration: Allow easy setup and configuration of the device (e.g., Wi-Fi credentials, sensor ID, and secret token) using a mobile phone. Additional Features: Measure and report moisture level, temperature, and battery level. Optimize for low power consumption to maximize battery life. Your task is to design the electronics and firmware for this device, ensuring

...(VR) experience. The project focuses on civil designs transitioning to final structural buildings, covering three different plans and projects. Key Deliverables: Storyboarding: Develop a comprehensive storyboard for the experience. Animated Video: Create a high-quality 8–10 minute animation. AI Voiceover: Integrate AI-generated voiceovers to narrate the experience. Interactive Hotspots: Include hotspot-based interactions for assembly demonstrations at various points. Ideal Skills and Expertise: Proficiency in AR/VR development tools such as Unity3D, Unreal Engine, ARKit, ARCore, and 3D animation tools like MAYA. Experience in cross-platform development to ensure compatibility across devices. Strong UX/UI design skills to ensure a user-friendly and engaging experience. Fa...

...components will be integrated into lightweight, animal-friendly wearables such as collars or harnesses, designed to provide continuous monitoring with minimal disruption to the animals’ daily activities. To ensure reliable and long-term operation, the system will incorporate solar-rechargeable power solutions, reducing the need for manual charging. Various connectivity options, including GSM/LTE, WiFi, LoRaWAN, and Bluetooth, will be employed to transmit collected data to the cloud for analysis and real-time decision-making. The hardware will be built to withstand harsh farm environments, ensuring durability, low power consumption, and ease of use for farmers. The system is designed to be scalable and adaptable to different farm sizes and operational needs....

We are looking for Gas Leak det...input Should have Type C plug for India users. Intuitive Design Include automatic battery backup in case of power cuts. Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas. Low warm up time (<1 Minute) Reboot system button LED with Alarm indicator, state indicator and power/low battery indicator. Gas leak detector should be wifi enabled (IOT) Code for further customization of gas sensor API for integrations with our company application. Mobile app for android and iphone App can be installed on multiple devices with same user id and password. App configuration Gas detector pairing option Ability to add multiple gas detectors Alert notification for Gas leak Low battery Hear...

I need an experienced PCB designer to create a PCB for a smart robot car that primarily follows a line. The PCB should support various sensors and include some additional features. Key Requirements: - The PCB should support Infrared sensors, Ultrasonic sensors, and Camera modules - Integration of a Bluetooth/WiFi module for communication - Inclusion of motor driver circuits to control the car's movement Ideal Skills: - Extensive experience in PCB design - Familiarity with designing PCBs for robotics - Knowledge in integrating various sensors into a PCB - Proficiency in designing PCBs with wireless communication modules Please include examples of similar projects you've completed in your application.

i Need a software in my pc to create a communication with my work team at work site using hotspot from my pc and app phone of my work team in order to communicate with them from my pc to their phones - distance between us max 20m -high noises in work place ( the purpose of this project ) - no network available at workplace using only hotspot network of any other idea proposed from you - make it as simple as possible the most important is communicate with team work like a internal radio

NEED TO CREATE AN INTERFACE FOR ONT(OPTICAL NETWORK TERMINAL) FOR SOFTWARE LOCKING INTERFACE

Capture guest information for an email marketing campaign

...Ideal Skills and Experience: - Proficient in data collection and interpretation - Excellent research skills - awareness of basics of heating We want a simple table populating for all the products Company (eg ACME) Range Name (eg California) Style description (eg Vertical columns - you can choose something sensible) Construction Material (eg oil filled aluminium panels) Dims (h x w x d) Wt (kg) Wifi (Yes/No) Power (Watts (eg 1200) Typical competitive online price (eg £200) or trade price Source of price (eg reseller ) or company website Picture of an example of that Range Name (just to identify, low quality is OK). I have spreadsheet template I can send. Everything that hase the same name and style description should be part of the same family that will just vary in ...

...optic cable installer austin fiber optic contractor fiber optic contractor austin fiber optic contractors fiber optic installation fiber optic installation companies fiber optic installation companies austin fiber optic installation contractors fiber optic installer fiber optic installers fiber optic installers austin commercial wifi commercial wifi installation business wifi installation wi fi installers wifi installation companies wifi installation service wifi installer...

I'm seeking a Python developer experienced with M5Stick C Plus 2 programming and the Telegram Bot API. The project involves creating a solution that records audio from the built-in mic, encodes it into MP3 format, and sends voice messages over WiFi via Telegram. Key Requirements: - Program the M5Stick C Plus 2 to record audio and send it through a Telegram bot. - Use the built-in microphone. - Implement MP3 encoding of the audio. - The Telegram bot should be able to send the recorded messages. - Deliverables should include the source code, comprehensive setup instructions, and optional support for testing. Ideal candidates should have: - Proven experience in Python programming. - Familiarity with M5Stick C Plus 2 and its capabilities. - Prior work with the Telegram Bot API. -...

...areas listed below, we would love to hear from you! How It Works: - *Charge:* ₹10 to ₹1000 per minute - *Earnings:* 70% credited directly to your account - *Work Flexibility:* No fixed hours; you work at your convenience Project Categories & Expertise Required: 1.*Digital Services* - Digital Marketing - E-commerce - Website Development - Product Development & Design - WiFi and Network Setup 2. *Agriculture* - Precision Agriculture (Crop Selection, Soil Management, Pest & Disease Control) 3. *Animal Husbandry* - Dairy Farming - Livestock Management - Poultry Farming - Fisheries 4. *Marketing* - Lead Generation - Brand Management - Distribution Channels 5. *Personal Finance* - Investment...

I'm looking for a skilled developer to create a comprehensive school portal for our college using Python and Django. The portal should encompass several key functionalities, primarily focused on student management and grading systems, while also integrating library access, WiFi management, and exam processing, online fee payment system. The student management system is a critical component of the portal. It should be able to handle: - Detailed Student Profiles: Each profile should be comprehensive, containing all necessary information about the student. In your application, please provide examples of past work that you have done that is similar to this project. I am particularly interested in seeing examples of complex web applications that you have developed in the past. I...

...your offer is I'm seeking a professional to create a kit with a set of WiFi and Bluetooth Canbus controllers, and possibly a card, to read Canbus messages from a car and render gauges on an iOS UI. Key Responsibilities: - Develop a comprehensive kit with the necessary controllers. - Code to interface with the Canbus and display messages on the UI. - Utilize Virtuno, an app that creates gauges from a remote controller, as a starting point. The Canbus messages of interest will encompass all types, with a list of specific messages provided later. Ideal Skills: - Proficient in iOS development - Experience with Canbus systems - Skilled in hardware assembly and integration - Familiarity with Virtuno app - Knowledge of WiFi and Bluetooth communication methods This pr...

...smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities. Testing and Optimization: Ensure the system runs efficiently without buffering issues and provide debugging support for smoo...

Proje...an OpenRemote Greenhouse DIY Control System Project Description: I need a simple greenhouse control system using my existing OpenRemote setup. Hardware: I will provide an ESP8266 board. Sensors: Measure soil moisture, temperature, and humidity. Control: Automatically turn on/off irrigation based on soil moisture. Automatically control ventilation/heating based on temperature/humidity. OpenRemote: Integrate with my existing OpenRemote platform (I have OpenRemote installed on a VM and MQTT Explorer shows the correct IP). Create a basic dashboard for monitoring and control. Skills Required: OpenRemote experience. ESP8266 programming. Sensor and really integration. Finally, you will guide me to make a similar device for my DIY project at my home. Suggest a timeline an...

Pr...Build an OpenRemote Greenhouse Control System Project Description: I need a simple greenhouse control system using my existing OpenRemote setup. Hardware: I will provide an ESP8266 board. Sensors: Measure soil moisture, temperature, and humidity. Control: Automatically turn on/off irrigation based on soil moisture. Automatically control ventilation/heating based on temperature/humidity. OpenRemote: Integrate with my existing OpenRemote platform (I have OpenRemote installed on a VM and MQTT Explorer shows the correct IP). Create a basic dashboard for monitoring and control. Skills Required: OpenRemote experience. ESP8266 programming. Sensor and really integration. Finally, you will guide me to make a similar device for my DIY project at my home. Suggest a timeline an...

I'm experiencing sporadic connectivity issues with my home automation project. The setup involves an Arduino Uno and an ESP8266 WiFi module. Key Issues: - The Arduino Uno seems to go offline without a clear reason. - Unsure how to bring it back online. Ideal Skills and Experience: - Proficient in working with Arduino boards, particularly the Arduino Uno. - Hands-on experience with the ESP8266 WiFi module. - Strong troubleshooting skills for connectivity issues, especially with COM port. - Background in home automation projects would be a plus.

I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.

...would be delighted to assist you in creating your moisture sensor app. Project Overview The app will: Hardware: The ESP8266 module will handle Wi-Fi connectivity, communicating with the app. Sensors can be simulated or real, depending on your requirements. App Features: A clean interface inspired by your provided pictures. Real-time updates for sensor values. Customizable moisture thresholds for user-defined control. Development Process: Initial setup and design of the user interface. Integration of the ESP8266 for seamless communication. Testing with both simulated and real sensors to ensure reliability. Why Choose Me? Extensive experience working with Arduino and ESP8266 modules. Proven expertise in developing user-friendly Android applications. Commitment...

Tafadhali Jisajili ama Ingia ili kuona maelezo.

Tafadhali Jisajili ama Ingia ili kuona maelezo.

I need an expert in network security to help identify unauthorized users on my home wifi network. The main objective of this project is to pinpoint any potential wifi thieves. Key aspects of the project: - I am specifically looking for software-based detection methods. - Experience with network security and unauthorized user detection is crucial. - I would prefer someone who can deliver a comprehensive report on the findings. Your bid should reflect your ability to meet these requirements.

I'm looking for a Tuya expert who can help me create a Python function to set my single electricity meter (a 1 channel smart power clamp) into pairing mode. The function should also send the SSID and password of my current network setup. NOTE: the Tuya device is in a known wifi network; after receiving the command it will switch to the new one Key Details: - Device Type: The project involves a Tuya-compatible single electricity meter, specifically a 1 channel smart power clamp. - Interaction Method: The function will control the device locally via the LAN protocol. - Network Information: The function should be able to utilize both the SSID and IP address of the network. Ideal Skills and Experience: - Proficiency in Python - Experience with Tuya devices - Knowledge of Local c...

...and two GC9A01 TFT displays. Key requirements include: - Using frame-by-frame animation techniques with libraries such as LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS for storage. - Smooth rendering and advanced functionality. - Implementing a servo motor mechanism for controlling the 'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong background in frame-by-frame animation techniques. - Familiarity with LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or Little...

As a part of Kilobytes Data Solutions, a company delivering technical support and services in the networking and communications sector, we are in need of IT professionals on a contract / freelance arrangement for varies c...existing clients. Key responsibilities: - Offering continuous technical support to our clients - Planning and consulting for network design and infrastructure - Troubleshooting any networking issues that may arise Your expertise should ideally include: - Extensive experience in IT Infrastructure design - Proficiency in configuring internet gateways - Expertise in setting up and optimizing LAN and WiFi infrastructure If you're passionate about providing high-quality IT support and enhancing network infrastructure, I'd love to hear from you. - see job ...

I'm seeking a proficient developer to create a module for my Android POS system built with React Native that connects with the Beko X30 TR Terminal. The aim is to streamline payment processing and print receipts complying with the Turkish Finance law. Key Requirements: - Development of a module for Mobile POS that connects with Beko X30 TR Terminal via WIFI - The module must allow to transmit oder details to the terminal (entered through our touchscreen pos). - The module should streamline the operations properly. Ideal Skills: - Expertise in POS systems, particularly Mobile POS - Experience with Beko X30 TR Terminal - Proficiency in developing payment processing modules - Knowledge of integrating various payment methods

...systems. Project Overview The firmware needs to fully disguise the DMA card, enabling it to emulate another PCIe device. This includes replicating the configuration space, buffer responses, and overall behavior to appear and function exactly like the target device. The firmware should also be optimized for gaming scenarios. For reference, here’s an example of the desired functionality: pcileech-wifi by ekknod. Examples of Configuration Needed for Emulation ASIC Tab: Number of Lanes: Define the PCIe lane count to match the emulated device. Maximum Link Speed: Ensure the link speed aligns with the target device's specifications. IDs Tab: Vendor ID: Match the Vendor ID of the target device. Device ID: Set the Device ID identical to the emulated hardware. Revision ID: E...

...I'm using for every small car with Raspberry I have a web server on the Raspberry itself, an internet connection and a computer that acts as a VPN server. I use IPTABLES to remap data traffic between the real card and the virtual VPN card. The end result is that I can access my Raspberry through a friend's or my parent's internet connection, while the Raspberry stays next to me connected to my Wifi, but using someone else's internet through my own internet. This forces me to pay several Internet and to have a computer, (even if it is an Orange Pi Zero 3 that costs less than 30 euros) for each car. Being able to use Janus Gateway to manage all the video and audio streaming from all Raspberrys in all small cars would be a better, sleeker, more economical (in ...

...user 30) - Servers - Network devices (routers, switches, Firewall, WiFi Access points, Controllers) - CCTV -Access control system The selected expert will also be responsible for deploying and setting up all infrastructure devices remotely with help of on-site coordinator. Expert will also be responsible for implementing the solution for managing/Protecting endpoints(laptops, desktops etc). The network configuration will be Wireless (Wi-Fi) except for specific points where Wired connection is preferred for better performance, so expertise in setting up and configuring a robust Wi-Fi network is crucial. Ideal skills and experience for this job include: - Proven experience in IT infrastructure setup with Switches, Routers, Wifi Access point(Ubiquiti/Unifi experience is de...

...file that adds in the most recent images transferred and uploads that to the same location. 5) Confirm upload is complete 6) Delete the files from the mass storage drive 7) Put itself in a low power state or sleep until it is reset via external controller. If the program does not see any new files to copy, send either an Email or SMS to the user. It will need to be accessed via Bluetooth or WIFI to have the following information configured by the user, a web app for this would be great. Nothing fancy, just the following information and a nice branded look. 1) Network credentials 2) Internet address to upload the files 3) Delete off local drive after upload as a user selected option 4) Email/SMS of the user in case the system wakes up and does not see any new files to uploa...

Tafadhali Jisajili ama Ingia ili kuona maelezo.

...firmware developer to create a WiFi-enabled pen drive using an ESP32 module and an SD card module. This device should function as a traditional USB pen drive while also enabling wireless data transfer and management. Key Requirements: - The primary use case for this device is business file sharing. This means it should be able to handle large files, work reliably, and be user-friendly. - For the wireless management and data transfer, I'm specifically interested in the FTP protocol. - In terms of security, the device should include password protection to ensure secure file sharing. Ideal Skills and Experience: - Extensive experience in hardware and firmware development. - Prior work with ESP32 modules and SD card modules. - Familiarity with creating secure, WiFi-enab...

I'm seeking a seasoned hardware and firmware developer to engineer an offline, WiFi-compatible USB pen drive via an ESP32 module paired with an SD card module. This device should operate as a conventional USB pen drive, whilst also facilitating wireless data transfer and management. Key Requirements: - The primary function of this device is to support wireless data transfer, specifically enabling file sharing between multiple devices. - Compatibility is crucial. The pen drive must support seamless wireless file sharing across Windows, macOS, and Linux operating systems. Ideal Skills: - Extensive experience in hardware and firmware development. - Proficiency with ESP32 and SD card modules. - Strong understanding of USB drive functionality and wireless data transfer mechanisms....

Looking forward for experience person who are very good knowledge of raspberry pi w zero. I want some one who can work woth me for my project as i want to increase the wifi range of raspberry pi.

...of search results 3- Page for places details 4- Navigation for selected place with Google Maps, Yandex etc. Important detail about it; can be done multiple search and should be filtered by search. Example; If user is searching hammer and nails together; It has to show places which has both of them. An example for multiple searching; "I'm searching a place which has 'hammer', 'nails', 'book', 'Wifi'" That means we need 4 lines of searching. Search results should show the places which has all 4 of them, except one or two or three of others. On the other hand; I need an Admin Panel to create database by myself. It can't be Google based data, we'll add all information in it from zero. Section about places which...

im conected to a clasifeds url but in my android i recive information faster..meanwhile in my andoid appears"posted 10 minutes ago" in my computer appears "posted 5 minutes ago" im using the same wifi conection.. refreshh diferent browsers etc. this is not issue about hardware maybe both device are conected to the same website bur virtually are conected in diferent place

I'm looking for someone to find out for me what do Uber eats, Menulog or DoorDash In Australia give to all the restaurants in Australian as is a android hardware brands & models number as do have 5G SIM card & or WiFi. printer Built in Overall, I need comprehensive details on all types of hardware provided to restaurants by these services. This includes: - Detailed information about the Android hardware's SIM card capabilities. I want to know about all SIM card details, specifically focusing on 5G SIM cards - Complete specifications on the printer functionalities of these devices.

...updates as required to fix bugs and update app to work on future OS version releases. Candidate Requirements: - Proven experience developing Android & iOS apps. - Familiarity with WiFi-based device connections. - Expertise in media management and camera integration. - Ability to handle two-user scenarios (remote control via APP). - Experience in designing intuitive and visually appealing UI (buttons, graphics, etc.). - Ongoing support for bug fixes and future updates. Key App Requirements: - Power and light control. - Functional controls. - Activate/deactivate some hardware functions and settings. - Manage WIFI connection between app/phone/hardware. - App should have photo/video controls: take photo, start/stop video, rapid burst photos, zoom/in out. - Editing capabi...

...inform & doesn't loose it's WiFi info Incase of controllers to search the controller in admin panel and put WiFi info in it remotely for that customer has to connect it first. Select the active controller for multiple locations. Wifi info can be pushed through the aap or from the admin panel. Account can have location while creating & can be controlled from a Centralized location. Compatibility Google Home Alexa IFTT Smart Things Resellers can only see or search their own clients or controllers. Admin panel can see all the devices. At the time of first connection of the device (controller)with aap,aap should push a firmware to the controller that has server IP address & where to communicate after every reboot & communicate on a regular b...