Gps transmitter and receiver arduinoKazi
Ivane pronasao sam te i vidim da se bavis programiranjem , meni treba uraditi-prepraviti neki kod za moj projekat za arduino da li si zainteresovan, pozdrav Nedim
I require ...preference. The AI-generated code has been causing me issues, so I need someone with expertise who can help debug and complete the programming. The main problems I am facing are compilation errors, runtime error. The work won't take much time as the code has already been generated by LLM only error correction is needed. Key Requirements: - Extensive experience in embedded C/C++ - Proficiency in either Zephyr or RT-Thread RTOS - Ability to troubleshoot and fix AI-generated code - Experience with the CH32F103C8T6 MCU Please note that mere knowledge of Arduino is not sufficient for this task. Your role will primarily involve code testing and completion, so a keen eye for detail and strong debugging skills are essential. The freelancer n...
...Project Overview I have a custom Boat Lift Controller (Arduino/AVR-based) that communicates over USB-to-serial. I need an Android app (for phone/tablet with OTG) to serve as a Dealer/Installer Toolkit, providing: Full configuration (all settings, e.g., limit switches, motors, etc.) Setup Wizard (mandatory) with GUI screens guiding through each step of device setup. Control (move the lift up/down, set presets, toggle AUX lines, etc.) Monitoring (real-time serial terminal for manual commands, logs, etc.). Firmware Updates over USB for both the main controller and a sidekick microcontroller board. The final app must replace the need for a laptop + terminal software. A dealer can just plug in their Android device with an OTG cable, open this app, and do everything nee...
...cross-platform app for both Windows and Android. The app will interface with an engine dynamometer (dyno) and will need to support: - Real-time data monitoring - Data logging - Control of dynamometer settings - Real-time calculation of horsepower (HP) using a supplied equation The ideal candidate for this project should have extensive experience in app development, particularly for Arduino-based systems. A strong understanding of engine dyno operations and data interpretation will be advantageous. Given the nature of this project, proficiency in real-time data processing and cross-platform app development is crucial. Arduino Dyno APP Project. The objective of this project is to create a App, capable of reading and displaying the outpu...
I'm looking for a skilled IoT and Bluetooth professional who can help design a remote control using nRF devices from nordic or equivalent for low power consumption to control various types audio equipment like amplifiers, preamplifiers, control equipment, equalizers. The freelancer will also design the Control unit on the Audio equipment using ESP32 (with the native IDF, NOT using Arduino) to receive the do the initial connection with the remote control and the mobile app, then maintain the connection, receive the commands from the paired devices, and send them locally to a queue. The system should be able to control various aspects of the device, including: - Volume control - Track selection - Power on/off - Menu navigation - Device selection - Inpu...
...designing a drone that includes a transmitter and receiver. The project involves creating a modulator for the transmitter capable of encoding data using the Amplitude Shift Keying (ASK) modulation scheme. Key project components include: - The data will be sourced from an Arduino in binary form and needs to be modulated with a sine wave for transmission. - The drone will communicate its speed to a controller. - An analysis of the characteristics of both linear and non-linear amplifiers through a modulator at the transmitter end. Ideal skills for this project: - Proficient in circuit design and PCB creation. - Experience in working with Arduino and drone technology. - Knowledgeable in both linear and no...
I'm looking for an expert to wire 5 buttons with 5 LED 7-segment counters. The buttons will be manual push buttons, and their function will be to increment the count on the LED counters. I already have the components including Arduino Uno R3 Boards that are pre-programmed with a time delay so the buttons cannot be spammed. I need to understand how the circuit works and how it is wired properly. Wires have been disconnected and it is not working at this time. Ideal Skills: - Proficient in working with 7-segment displays - Experience with wiring manual push buttons - Knowledge of basic circuit design and implementation
...augmented reality (AR) applications to join our team and finalize the development of our AR app. The app is already built with most of its core features, but we need an expert to focus on key areas: Enhance GPS Location Management: Fine-tune and optimize location services to ensure accurate and efficient GPS tracking and location-based features. Boost Security: Implement security measures to safeguard user data and prevent vulnerabilities within the app. iOS Development: After refining the Android version, transition the app to iOS, ensuring smooth cross-platform functionality and performance. Required Skills & Experience: - Proven experience in mobile app development, particularly in augmented reality. - Expertise in GPS...
I'm looking for a passionate and skilled Robotics Tutor to teach my Basic Robotics Course. The ideal candidate will have experience in robotics, basic electronics, and programming, specifically with Arduino. The tutor will deliver online classes, guiding students through the course content with hands-on projects and discussions. Key Responsibilities: - Deliver engaging online classes - Guide students through course content - Facilitate hands-on projects and discussions Ideal Skills: - Experience in robotics and basic electronics - Proficient in programming with Arduino - Experience teaching beginners - Strong communication skills for online tutoring
...Reader with USB Interface Project Overview I am looking for a skilled electronics engineer or PCB designer to create a schematic and PCB layout for a device that uses: ATmega32U4 (5 V, native USB support, 44TQFP package) PCF7991 RFID base station IC (operating at 5 V, 125 kHz) USB interface for communication with a PC (no external USB–serial chip required) This device will transmit and receive data at 125 kHz for transponders (e.g., automotive immobilizer tags) using the PCF7991 and a coil antenna. The ATmega32U4 will handle the low-level bit-banging, timing, and decoding, while appearing as a USB CDC device (virtual COM port) on the PC side. I have existing Arduino-based code (.ino) that demonstrates how to interface with the PCF7991 (origina...
**Project Announcement: Application for Receiving Orders and Shipping Goods within a Specific Area (Works on Android and iPhone)** We are seeking professional developers to implement a mobile application project that works on both Android and iPhone systems, as well as on computers, in compliance with the policies and laws of the United Arab Emirates. **Application Idea:** The application is a platform for receiving shipping orders and managing the process of delivering goods within a specific geographical area. The app will be an effective tool for managing orders, tracking shipments, and facilitating communication between customers and employees. **Project Requirements:** **Supported Operating Systems:** - Android - iPhone (...
I'm seeking an ESP32 developer with experience in working with GPS Module LC89L/G from Quactel and Sensor LSM60DX. The project revolves around tracking and monitoring, specifically focusing on location data and movement data. Your expertise will be crucial in implementing the following: - Utilizing the ESP32 for data collection and transmission via Bluetooth. - Implementing OTA updates for system reliability and maintenance. - Using Restful APIs for data communication. Ideal candidates will have a strong background in IoT and embedded systems, with previous experience using the specified modules. Proficiency in Bluetooth communication is a must, as well as experience with OTA updates and Restful APIs.
...convert my existing HTML prototype into a fully functional native iOS and Android app. The current version has been converted to an APK, but I need a more robust, native solution that leverages the full power of smartphone capabilities. Background knowledge in Golf is a plus Key Requirements: - The app primarily utilizes GPS maps and user-entered data. - Implementing offline functionality is crucial. This includes: - Capability for data entry and storage without internet - Ensuring limited app usability offline - There is no user authentication required, hence no need for login systems. Ideal Skills and Experience: - Proven track record in developing native iOS and Android applications. - Proficiency with GPS and mapping AP...
...create a car sharing rental app for both iOS and Android platforms. Key Features: FOR THE RENTER - User Registration & Authentication – Sign up via email, phone, or social login. - Profile Management – Update personal details, payment methods, and rental history. - Car Search & Filters – Search for cars based on location, date, price, type, brand, fuel, transmission, etc. - Car Details Page – View car photos, specifications, pricing, owner details, and reviews. - Instant Booking & Request Booking – Book cars immediately or send requests for approval. - Secure Payments – Integration with Stripe, PayPal, Apple Pay, Google Pay, etc. - Ride Scheduling – Rent instantly or schedule for a future date. - Trip Manageme...
...(iOS & Android) to accept trips, navigate routes, and track earnings. 2. A web-based admin panel for dispatchers to schedule, monitor, and optimize trips. The app must integrate real-time GPS tracking, automated route optimization, and Medicaid billing compliance while ensuring a seamless and user-friendly experience for drivers and administrators. Hybrid Pay Model will be implemented: • Drivers earn $20 per hour as a base pay. • Drivers earn an additional $5 per trip starting from the third trip per hour. • Automatic pay calculations based on trip volume and hourly guarantees. Key Features & Functionalities: 1. Driver App (iOS & Android) The driver-facing mobile app will enable drivers to receive trip ...
I need an experienced Arduino engineer to help me with a project. The goal is to control a filter press through a progressive increase of air pressure. This will be used in an industrial setting. Key Requirements: - Design an automated control system using Arduino and remotely control - Implement this to regulate air pressure in the filter press Ideal Skills: - Strong background in Arduino programming - Previous experience with industrial automation systems - Understanding of filter press operations
• Add sort by name/date etc. to open file dialog • plot GPS track bitmap • Add drag of y-axis to change size • Allocate colours to channels automatically
...products, enabling end users to scan the tags and verify authenticity via a web-based interface. Each business (tenant) will have its own dashboard, branded verification page, and isolated data storage. Key Requirements 1. Multi-Tenant Functionality • Ability to register multiple businesses/organizations as tenants. • Each tenant has its own admin dashboard to manage NFC-authenticated items. • Data isolation: Tenants can only access their own records. • Role-based access control (e.g., Tenant Admin, Staff Users). • Custom branding per tenant (logos, colors, and subdomains like ). Choose NFC Tags – Order NTAG213, NTAG215, NTAG424 DNA (for encryption), or tamper-proof NFC stickers. 2. NFC Tag Functionality • Ability to prog...
I'm looki...looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and...
Programa para Arduino ESP32 e display TFT 2.4 220x320 ILI9341 com um temporizador de 00min. 00seg. disparado por uma entrada que tbm dispara um totalizador de 4digitos e indicação de um codigo QRcode
I need an Arduino Uno code, alongside a connection diagram, that will allow me to integrate an RFID reader with a MIDI serial bridge. The setup should output a distinct MIDI note for each of my 6 RFID tags. Key Requirements: - Each RFID tag should trigger a different MIDI note when scanned. - The MIDI note numbers need to be hard-coded within the program. - The use of a 7-byte RFID tag, with UID provided by me. Ideal Skills: - Proficient in Arduino programming. - Experience with MIDI serial bridge setups. - Knowledgeable about RFID technology. - Capable of creating clear, understandable connection diagrams. The connection setup will be as follows: - An RFID reader is connected to the Arduino. - The Arduino is linked to a Hairless MIDI serial bridge. - The s...
...app should have a user-friendly and modern interface, allowing users to easily navigate between different features. First and foremost, the app should have a clean and organized homepage with a welcoming design, where it’s easy to find various options for booking travel. Travel Booking Features: • Travel Search: A search function where users can enter their current location and desired destination, as well as the time and date for the trip. The app should automatically show available travel options based on these parameters. • Filters: The option to filter travel results by price, transportation type (e.g., taxi, bus, car), and departure location. • Trip Details: When a user selects a trip, a detailed view should display inf...
I'm looking for an experienced mobile app developer who can help modify our current GPS vehicle tracking software. The core of the task involves integrating AdSense into the app. Key Requirements: - Add interstitial ads to the app while it is loading - Implement banner ads to be displayed while opening the app - Position the banner ad at the bottom of the home screen The ideal freelancer for this project should have extensive experience in mobile app development, particularly with integrating AdSense. Prior experience with '' GPS vehicle tracking software is a plus. Please ensure your previous work is visible in your bid.
The project is a vehicle tracking device using a microcontroller + GPS IC + 4G communication using eSim. The project will involve 1. Hardware/component selection. 2. Schematic design. 3. Firmware development. The device needs to communicate with a central server. All the protocols and features of the device are well defined in an official document.
...looking to make an app that works on Android and Iphone. It is a simple application to control the tasks of my workers, everything I find commercial, or is complicated to use or does not fit what I need. The app has to have two parts, a control panel via web and the app itself. Inside the control panel I need to be able to log in with a username and password. Once inside: - USER MANAGEMENT TAB • CREATION OF NEW USERS • AUTOMATIC USER CODE ASSIGNMENT • USER FIRST NAME AND SURNAME • USER DEPARTMENT • PASSWORD ASSIGNMENT • PASSWORD CHANGE • REMOVAL OF USER AND REVOCATION OF APPLICATION TO USER - REAL TIME CONSULTATION TAB • TO CONSULT IN REAL TIME BY USERS WHAT IS BEING DONE AT THAT MOMENT BY EACH EMPLOYEE - DAILY R...
I'm looking for a skilled engineer to develop an Arduino-based project for controlling an LED light. The light will be an LED and will be activated through a mobile application with a simple click. Key Requirements: - Experience with Arduino programming - Proficiency in developing mobile applications - Knowledge of LED circuitry - Ability to create a seamless user experience - Good communication skills for project updates and discussions The main task will be to design the control system, program the Arduino, and develop the mobile app interface. The goal is to have a functional, user-friendly system for controlling the LED light via clicks on a mobile app.
...learning to predict cab fares in real-time. The app should be able to source data from GPS locations and historical fare information, and will utilize OLA and UBER APIs. Key Functionalities: - Fare Prediction: The app should estimate the fare of a ride based on real-time data. - Graph Generation: The app should generate a line graph illustrating fare predictions over time. - Ride History Tracking: The app should keep a record of past rides and their corresponding fares. Ideal Skills and Experience: - Proficiency in Flutter and Android app development. - Basic understanding of Machine Learning and its integration in mobile apps. - Experience with API usage, specifically OLA and UBER APIs. - Capability to design and ...
I'm looking to develop a Flutter field app integrated with a Laravel backend. The app's primary functionality will be GPS tracking, so it needs to be able to monitor locations in real-time and optimize routes. Key Features: - GPS Tracking: The core functionality of the app. - Real-Time Location Updates: The app should be able to provide live updates on the location. - Route Optimization: The app needs to have the ability to optimize routes based on the real-time data. Ideal Skills and Experience: - Proficient in Flutter for app development. - Extensive experience with Laravel for backend development. - Previous experience developing GPS tracking apps will be a plus. - Strong understanding of route optimization algorithms.
...day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in one of the following countries... Bosn...
I'm looki...looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and...
...com/ The home page has a two minute video that will explain what we are doing. The Arduino controls four pumps using PWM by pressing any of 12 keys on a keypad. All "formulas" are timed to shut off automatically. We have added (and it works) the monitoring of BLE beacons so that the MAC address nearest the Platform is identified and the Platform sends a line similar to the following message to Serial Monitor #2502101,10991,5,ff:ff:11:4c:50:d1,99& Serial # of Platform time in seconds since Platform powered up + 10000 MAC address of nearest beacon (They all transmit address,"iTAG" there are 13 spaces behind iTAG, and signal strength That is all we need to determine whether janitors are properly cleaning and sanitizing areas...
Netflow project milestone first for the following project completed (1) Add dynamic and adaptive modes (2) Add covert communication channel through flow warden between covert sender ,covert receiver. (3) Repeat point 2 for packet warden and NEL phase env covert sender and receiver. (4) Take sample measurements to validate your modifications (5) Create a detailed documentation of work done so far relating to flow warden until now. First milestone payment is 650€ and second milestone payment is 600€ making a grand total of 1250€
I'm looking for a skilled app developer to create a cab booking application for both iOS and Android. Key Features: - Live GPS Tracking: Users should be able to track their rides in real-time. - In-App Payments: A secure and user-friendly payment system is essential. Target Audience: The app is designed for the general public, so it should be intuitive and easy to use for all age groups. Ideal Skills and Experience: - Extensive experience in cross-platform mobile app development. - Proficiency in implementing real-time tracking and secure payment systems. - A portfolio showcasing user-friendly applications aimed at the general public.
...day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in one of the following countries... Bosn...
I'm looking for a seasoned mobile app developer who can create a taxi booking app compatible with both iOS and Android. This app, similar to Taxi Sanchalak available on Play Store, should cater to both drivers and vendors. Core Features: - User ratings and reviews system to ensure credibility and maintain service quality. Ideal Skills and Experience: - Proficiency in cross-platform mobile app development. - Prior experience in developing GPS enabled apps. - Understanding of implementing in-app rating systems. - Familiarity with taxi booking app development is a plus. Please share your portfolio of similar projects when you bid.
...day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in one of the following countries... Bosn...
Vehicle Tracking and Monitoring Platform 1. Overview This document outlines the design and development of a comprehensive vehicle tracking and monitoring platform. The platform will cater to an initial capacity of 2000 resources, with provisions for scalability to meet future requirements. It will include essential, innovative features, a user-friendly interface, robust server architecture, and advanced integrations. 2. Platform Capacity and Scalability • Initial Capacity: Capable of managing up to 2000 resources (vehicles, drivers, assets). • Scalability: Seamless upgrades to accommodate more resources through cloud-based or on-premises infrastructure. 3. Features Core Features 1. Real-Time Vehicle Monitoring • Accurate GPS-based tr...
...designed to meet the needs of nursery owners, parents, and administrators by providing essential functionalities such as child management, attendance tracking, billing, and more. Technology Stack** • Front-end: React and • Backend: PHP (Laravel framework) • Database: MySQL Deliverables 1. Main Application Account • Dashboard • Customizable with widgets and graphical elements. • Client Account Management • Create, suspend, delete client accounts. • Access Control • Give access rights to certain features. • Billing with Deposits and Discounts • Implement basic functionality between super-admin and client accounts. • Website with Login • Basic login functionality. 2. Clients (Nurse...
I'm seeking a skilled programmer to write an Arduino code for a BQ25887 Charger 5 click USB charging IC board. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () Key Requirements: - Charging condition: Need to charge two separate single cell battery of 2000mah via USB charging of around 5V 3A. - For each individual cell, the max charging voltage should be 4.2V and the maximum charging current for each battery should be 1A. - The code should allow for automatic initiation of the charging process. - Enable cell balancing to maintain cell voltage equality. - Implement fault recovery (e.g., reduce current, stop charging)
...want to modify the design to include a stepper motor for automated rotation and add a compartment to house electronic components (boards, battery, etc.). Additionally, I need some aesthetic and structural changes to improve the design. Required Modifications Add a Stepper Motor: Attach the stepper motor to the back of the design. The motor body should be screwed to the body of the dispenser. Connect the motor shaft to the wheel using a 5mm flange to enable rotation of the dispensing mechanism. Add a Compartment: Create a compartment with dimensions 20cm x 10cm x 5cm to house: Circuit boards Electronic components Battery Ensure the compartment is easily accessible for maintenance. if you have knowledge on Arduino UNO and electronic components, making design ...
...day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in one of the following countries... Bosn...
I'm looking for an Arduino-based UPI system designed for restaurants. The system should verify payments within 3 seconds with utmost accuracy. Key features: - Touch Screen User Interface: The system should be equipped with a responsive touch screen interface. - Payment Method: The system must support payment through barcode scanning. Ideal Skills: - Proficiency in Arduino programming - Experience with touch screen interface development - Knowledge in barcode scanning integration - Skills in designing systems for restaurants - Capability to ensure quick and accurate payment verification
I'm seeking an experienced developer to create a Telegram chat bot that uses Asterisk. The bot should be able to make calls, capture DTMF tones, and spoof caller IDs. It should also read custom text to the receiver of the call and be capable of placing calls from a spoofed number. Key features should include: - Making calls - Capturing DTMF tones - Spoofing caller ID The bot will only run on the Telegram platform, specifically as a chat bot. The ideal candidate should have: - Extensive experience with Asterisk - Proficient in developing Telegram bots - Strong understanding of DTMF tone capture - Ability to implement caller ID spoofing - Experience with text-to-speech technologies
...skilled mechanical and electrical engineer to assist in the creation of a steel prototype and its corresponding application. This project involves both building the physical product and developing the application that will link to it. Key requirements include: - Proficiency in software and API integration - Experience with PCB design and implementation - Ability to incorporate real-time GPS tracking into both the physical product and the application The application will need to feature a few simple elements related to social media, specifically: - Friend connectivity - Sharing updates The ideal freelancer for this project would have a strong background in both mechanical and electrical engineering, with proven experience in pro...
...system for quality analysis. The system will include hardware (sensors and microcontroller) and software components to measure parameters such as moisture content, weight, and color quality of paddy grains. Additionally, we may require optional enhancements like a database and dashboard. Key Tasks and Requirements: 1. Hardware Setup: Components: Moisture sensor Load cell (with HX711) for weight measurement Color sensor or camera for visual quality analysis Microcontroller (Raspberry Pi or Arduino) Additional components: breadboard, jumper wires, power supply, etc. Responsibilities: Design and set up the hardware system. Connect sensors to the microcontroller and test individual components. Ensure the components work properly a...
Sensor data from Arduino to SQL database locally.
This project involves creating an Android application that interfaces with an Arduino-controlled setup containing 4 LEDs and a SIM800L module. The application allows a user to control the LEDs remotely, as well as receive data from the LEDs' states. Key Requirements: - The user has 4 buttons in the app to turn the respective LEDs on and off. - The app reflects the LEDs' states in real-time: when an LED is turned on, the corresponding button changes colour to green, and changes to red when turned off. - The app includes an OTP-based authentication system for secure access. - The app is designed with a simple and clean UI. - The app can be configured to work with multiple devices. - There is no requirement for a server or database, all communic...
Looking to get a php api that takes a postcode. goes too my database and brings back customer details for that post code. A similar api is written like this so most of code can be copied. Simple project and i need this done today public function geteircode(){ if(isset($_POST['eircode']) && !empty($_POST['eircode'])){ $code = strtr($_POST['eircode'],[' '=>'']); $ir_identifiser = array("A41","A42","A45","A63","A67","A75","A81","A82","A83","A84","A85","A86","A91","A92","A94","A96","A98","C15","D01","D02...
I need assistance renaming a Bluetooth receiver connection for a speaker system. The purpose of this renaming is for branding purposes, specifically to incorporate our company name into the Bluetooth connection. Ideal Skills and Experience: - Knowledge of Bluetooth technology and speaker systems - Experience in branding and marketing - Attention to detail - Technical skills for implementing connection renaming - Creativity for potential custom naming strategies Rename QCC3034 bluetooth module, bluetooth finding name to specific name.
