Esp32 ble scanner arduinoKazi

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,234015.00,A,4852.78123,N,0222.56312,E,0.027,,271224,,,D,V*14 $GNVTG,,T,,M,0.027,N,0.050,K,D*38 $GNGGA,234015.00,4852.78123,N,0222.56312,E,2,12,0.69,2.6,M,45.9,M,,0000*41 $GNGSA,A,3,10,02,17,21,08,32,,,,,,,1.20,0.69,0.99,1*02 $GNGSA,A,3,71,79,65,88,87,80,,,,,,,1.20,0.69,0.99,2*02 $GNGSA,A,3,27,34,30,04,36,06,09,,,,,,1.20,0.69,0.99,3*00 $GNGSA,A,3,28,34,11,16,06,21,,,,,,,1.20,0.69,0.99,4*07 $GPGSV,4,1,13,01,74,289,,02,79,295,37,03,37,229,20,08,33,170,21,1*65 $GPGSV,4,2,13,10,17,056,34,14,23,283,,17,23,312,18,21,77,103,37,1*65 $GPGSV,4,3...

I'm looking for an expert in ReactNative and BLE (Bluetooth Low Energy) to help integrate a native bridge in my app. The primary use of this connection will be controlling a health kit device - specifically for heart rate monitoring. Key Requirements: - Expertise in ReactNative and BLE connections - Experience with creating native bridges for app development - Previous work with health kit devices is a plus - Ability to implement device control features - Knowledge in heart rate monitoring tech is desirable Please only bid if you have proven experience in these areas. Your role will be crucial in ensuring the app can effectively control the health kit and monitor heart rates.

I'm looking for a skilled and experienced professional in raspberry pi or Arduino design and programming, with a strong background in home automation projects. Need to design with all components noted in image. Must provide links to purchase items to build working unit. Time Frame: 2 weeks Budget: as low as possible Ideal skills for this project: - Extensive knowledge and experience with raspberry pi or Arduino - Ability to design a user-friendly system - Proficiency in programming and troubleshooting - Creative problem-solving skills Program: Scan barcode and play audio based on barcode Audio can be paused, skip forward or back Led screen shows audio track #, battery life Requirements: ,schematic, PCB design, BOM ,components and website to find these co...

I'm looking for a seasoned professional with extensive experience in working with the ESP32 and cellular network connections. The goal is to set up a web server on the LILYGO T-SIM7000G ESP32 that can be accessed via a public static IP address. This project involves configuring the server to serve static files (HTML, CSS, JS) and handling real-time data updates. Key Responsibilities: - Configure the ESP32 to serve static web content and handle real-time updates. - Enable the ESP32 to process query/response data to a serial device. Skills and Experience Required: - Deep understanding of ESP32 and LILYGO T-SIM7000G. - Proficiency in Arduino IDE. - Previous experience in setting up web servers on ESP32. - Familiarity with AT commands and...

...for promotions, reminders). • Built-in CRM to track customer activity and loyalty stats. • QR code generation for easy card distribution. • White-labeling options to match our brand identity. 2. Languages and Localization: • The platform’s website and interface should be fully in Turkish. 3. Technical Requirements: • Compatibility with API integrations for CRM and POS systems. • A mobile scanner app for card processing. • Analytics dashboard for tracking loyalty program performance. 4. Experience: • Preference will be given to candidates who have previous experience with similar digital loyalty or wallet projects. Deliverables: • Fully functional web-based platform (desktop and mobile compatible). • Source code...

I'm seeking an expert with Arduino and robotics experience to create a voice-controlled, obstacle-avoiding vehicle. The vehicle must be capable of selecting an optimized path from a source to a destination using an open-source GPS API. Key Project Details: - The vehicle should start and stop based on voice commands. - In the event of an emergency, the vehicle should halt upon receiving a voice command. -vehicle speed should be controlled by voice command or web application -vehicle should maintain average speed when speed is not set through voice command or web application -vehicle speed must reduce when an obstacle is triggered or based on road conditions - The vehicle must follow a predetermined path under normal conditions. -it has to notify user when gps connection is ...

I need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been de...need a project that sequentially writes numbers on a Common Anode seven-segment display using Proteus. The programming language or tool to be used has not been decided yet, so you can recommend the best one based on your expertise. Key requirements: - Expertise in Proteus and seven-segment display implementation. - Ability to recommend a suitable programming language or tool (C/C++, Assembly, or Arduino IDE). - Experience in creating projects that display numbers sequentially. Your understanding of sequential numbering and Common Anode displays will be crucial for the success of this project. Looking forward to your ...

I'm looking to build a stock scanner that operates based on 9 separate rules. The ideal candidate for this project should be proficient in Python and have experience working with the Bloomberg Terminal API. Key Requirements: - Development of a stock scanner based on 9 distinct rules. - Using Python as the primary coding language. - Integrating the Bloomberg Terminal API into the scanner. Output: - The stock scanner should display its output on-screen. Ideal Skills: - Proficiency in Python. - Experience with the Bloomberg Terminal API. - Understanding of stock market and trading principles. Please note that the specific types of stocks to be scanned and the visual representation of the output are not predetermined. Therefore, flexibility and creativity i...

I'm looking for a skilled ESP32 C++ developer who can assist in configuring a monitoring device to track health metrics, specifically glucose levels. The device needs to be able to connect to some API/Webservices and display a value based on the return data Key Responsibilities: All configured via touchscreen Users will be able to select Wifi network via esp32 touchscreen - this gets them started They will then select which brand of glucose tracker they have The users will then insert there login credentials as required by the API And once logged in the monitor will display there current glucose levels as retrieved by the API , this will be a contious display on the screen showing nothing but a number - along side an indicator to show if the value is rising or dec...

I'm looking for a designer to create a 3D printable file for a custom ESP32 enclosure. The design should be based off an existing model () but will need some modifications. Specific requirements: - The enclosure should have a domed circular cover plate about 250mm in diameter.( I have some sample ideas that i can share) - It should include ventilation holes and mounting brackets. - The design should incorporate a custom logo on the front that will be a cutout. (Logo to be provided to the freelancer upon request) Ideal freelancer skills: - Proficiency in CAD software. - Experience with 3D printing design. - Ability to create custom logos in CAD. - Knowledge of materials and finishes suitable for 3D printing. (I have attached a sample of a similar

...and the product data starts from row 3 (ignoring the first two rows). The product data should have columns for product code, quantity, and price. The data is then inserted into an SQLite database (), with each product having an associated order_number, product_name, quantity, and price. Scan Listener: The application listens for barcode scans using the keyboard (simulating barcode scanner input). When a product code is scanned (or typed), the application looks up the product in the SQLite database and displays the information in a graphical interface. The application generates a product label with the product’s details and a corresponding QR code. Manual Input: The user can manually input the product code via a dialog box. After entering the product code, the system will ...

...for promotions, reminders). • Built-in CRM to track customer activity and loyalty stats. • QR code generation for easy card distribution. • White-labeling options to match our brand identity. 2. Languages and Localization: • The platform’s website and interface should be fully in Turkish. 3. Technical Requirements: • Compatibility with API integrations for CRM and POS systems. • A mobile scanner app for card processing. • Analytics dashboard for tracking loyalty program performance. 4. Experience: • Preference will be given to candidates who have previous experience with similar digital loyalty or wallet projects. Deliverables: • Fully functional web-based platform (desktop and mobile compatible). • Source code...

I need a PCB designed for the ESP32 S3 DevkitC-1. This is a prototyping project, so the design should be flexible and adaptable for different uses. i have provided the image ,design will have to be like that but with 44pins and screw terminals(22-left & 22p right) socket to plug esp32 s3 devkit c1,male jumper wires connector,and above mentioned screw terminal Key Requirements: - Design a custom-sized PCB, tailored to specific dimensions - Prototyping-focused design, allowing for adaptability - Knowledge in working with ESP32 S3 is a plus Ideal Skills: - PCB design - Experience with ESP32 S3 - Understanding of prototyping needs - Ability to work with custom size requirements

Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating I2C sensors.

I need a seasoned PCB designer to create a personal navigation device using an ESP32-S3. The low-power design will encompass various components such as a GPS, sensors buttons, and connectors. Key Features: - Incorporate ESP32 WROOM S3 and u-blox MAX-M10S GPS with chip antenna - Integrate a Speaker and 5 Pushbuttons - Include a Micro SD Card Slot and USB-C Connector - Have a Barometric Sensor, Accelerometer/Gyro, and Ambient Light Sensor - Implement a LoRA Radio and 4 connectors for battery & peripherals - Support LiPo charging and power management Board Dimensions: Approximately 44mm x 72mm Deliverables: - Altium Designer Schematic - Detailed Parts List (BOM) with supplier information - Altium Designer PCB Layout - Complete Fabrication data (Geber files etc) ...

I need an expert who can interface a USR-TCP232-T2 with an ESP32 in order to send sensor data to a website using GET and POST requests. just get and post requst demo will do the job any available api

I'm...Squareline Studio editor. The primary aim is to empower my engineers (who aren't software engineers) to design a GUI within Squareline, generate the code, and upload it to an ESP32 using the Arduino environment. Key project components: - The GUI should incorporate buttons and sliders as the main graphical elements. - The ESP32 should be capable of controlling devices, monitoring data, and triggering events through the touchscreen. - Utilization of the LittlevGL (LVGL) library in conjunction with Squareline Studio is necessary. Ideal candidates for this project should have: - Extensive experience with touchscreen integration and ESP32 microcontrollers. - Proficiency in Squareline Studio and the LVGL library. - Ability to simplify complex program...

I'm looking for a skilled developer who can create a comprehensive scanner on Chartink for me. The scanner should be capable of analyzing technical indicators, price action patterns, and volume. It should specifically incorporate the MACD, RSI, and Moving Averages, as well as some custom indicators that I will provide. Key responsibilities: - Develop a Chartink scanner with advanced functionalities. - Integrate specific technical indicators and price action patterns. - Customisation with provided indicators. Ideal skills: - Expertise in Chartink development. - Proficiency in technical indicators and volume analysis. - Experience in creating custom indicators. - Strong understanding of MACD, RSI, and Moving Averages.

I need an expert in ESPHome and ESP32 boards to assist with creating YAML code for controlling a servo via ESPNow. Key Requirements: - The main purpose is to automatically control a servo from 0% to 100% then return to 0% after 1s using an ESP32. This will happen when a photoelectric retroreflector switch is triggered on a different ESP32 board. ( When switch is triggered on one ESP32 board 1. The servo on ESP32 board 2 should instantly changes to 100% position and returns to 0% after 1s) - The communication between ESP32 devices should use the ESPNow protocol. - The yaml code should be suitable for ESPHome. - The ideal freelancer will have extensive experience with ESPHome, ESP32 boards, and ESPNow. I’m an electrical engineer w...

lets' fix my broken code...

Per our PMs, correct the existing code to enable the NEO 8M gps module to deliver data to serial monitor

My project involves troubleshooting an ESP32 Arduino code that integrates with a NEO-8M GPS module. Currently, the GPS data is not appearing on the serial monitor and this issue needs to be rectified. Key Requirements: - Maintain the original code structure and logic while debugging. - Modify the code to output full GPS data (including time and date) to the serial monitor. - Ensure that the GPS coordinates are accurately displayed. Ideal Skills and Experience: - Proficient in Arduino programming, particularly with ESP32. - Experienced with NEO-8M GPS module integration. - Strong debugging skills to identify and fix code issues. - Able to maintain the integrity of the original code structure and logic.

Correct code to enable GPS module to work with ESP32 and LVGL

Per our conversation, ESP32 GPS code correction

Per our conversation, ESP32 GPS code correction

...user interface programming project in MicroPython and FreeRTOS, that should work with a screen on the parallel port. The user interface should send pre-written commands to the DAC 8760 via SPI and read a voltage via I2S. The project has a PCBA part and a Firmware part. The major part is firmware development for UI and the PCBA part is just to test the UI. The Stimulation running page, where the ESP32 will send 700 commands per second to the DAC, during 20-60 minutes, But it should manage to responds without delay the user interface command while sending the commands to the DAC and refresh properly the screen. Note: There is no need to code the functional that will generate the different signal parts in the stimulation Running Page. Just make the UI and complete the applyStimu...

I'm seeking assistance with programming support for my Vision Master E290 using Arduino. Specifically, I need help setting up the Arduino IDE on my Windows system.

Hi! I'm seeking a developer to create custom firmware for the nRF52840 and nRF52832, leveraging the nRF Connect SDK. The firmware should include the following features: ADC Measurement: Capture ADC data via the TWI interface using the AD5593 IC. LoRa Communication: Integrate and enable the RFM95 module to send data via LoRa. Bluetooth Advertising: Enable BLE advertising to broadcast the collected data. I currently have a working solution built with the nRF52 SDK (version 17.1.0), but I need the firmware to be migrated and fully implemented in the newer nRF Connect SDK. Thank you for your time and consideration! Please let me know if you're interested or have any questions. Best regards,

I am in need of a microcontroller expert who can convert my current setup (ESP32, SIM800L, Neo6M GPS) into a more compact design using the STM32G030F6P6TR chip and embed it with a SIM868. The goal is to create a compact, efficient, and versatile tracking device. Responsibilities: - Convert the existing microcontroller setup to an STM32G030F6P6TR chip. - Embed the design with the SIM868 for enhanced functionality. - Design a PCB that accommodates this compact design without compromising performance. - Ensure the device is suitable for both indoor and outdoor use. The device needs to support real-time tracking functionality. Therefore, experience in designing tracking devices is preferred. Please note, I require only qualified professionals to bid on this project. Proposals genera...

implementing a qr code scanner is not that complicated, what is stuck is the continuous reading

I'm looking for a skilled developer to design a control system for 22 ESP32-CAMs. The system should display all camera streams on a single web-based interface, compatible with Windows OS. Below each stream, there should be a 3-position toggle switch. These switches need to control a 32-channel relay board over WiFi, using the Modbus protocol. Key Requirements: - Static ESP32-CAM streaming code - Modbus and relay modules code - Full setup code for the system - Implement user authentication via username and password Ideal Skills: - Extensive experience with ESP32-CAMs - Proficiency in Modbus protocol - Strong background in relay board control - Expertise in designing secure web-based interfaces - Excellent understanding of coding for static streams.

Job will be to program a small capacitive IPS, TFT LCD touch screen controller to a remote 12-channel relay board. UART2: TTL/CMOS. communications. There is software available for the small 2.1 inch touchscreen and menu icons, and to assist in firmware. The relay board would prefer to utilize Raspberry Pi Arduino and use pre-configured circuit board. for 12v relay outputs. The outputs will be controlled by the touch screen controller's selection icons and menu's. The conclusion is to have a circular touchscreen controller with visible picture/icons that will: 1) push to activate an ignition relay. 2) Menu's to activate all additional relays on/off functions with picture icons for each selected choice. Price: $50-100

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in

We are a cybersecurity firm...development to assist us in designing and implementing our website and the frontend interface for our scanner. Key Skills: - Proficiency in React, our chosen frontend framework. - Substantial experience with both REST APIs and GraphQL, as we consider both for backend integration. - A strong grasp of responsive and user-friendly UI/UX design to help us engage and attract users. - Familiarity with cloud security concepts is a plus, but not mandatory. If you possess the expertise and capability to turn our vision into reality, we would be eager to hear from you. Deliverables: - A fully functional, responsive website for our CSPM solution. - Intuitive frontend interface for our cloud security scanner. Looking forward to collaborating with talent...

I need an advanced ESP32 developer to help me connect a 3.5mm headphone with mic to an ESP32 and turn it into a hands-free device for calls. I have a full working example at the provided Github link. However, this example expects an external DAC or codec. I want to use the internal DAC and ADC and connect to a TRRS adapter. Your guidance and code will be crucial for this project. Working code But this assumes an external dac and adc according to my knowledge I want to use internal one and connect it to the 3.5mm adapter. I need a circuit diagram and code. Key Requirements: - The device must support answering and ending calls. - Expertise in ESP32 development is a must. - Previous experience with

I'm in need of an experienced developer to create a few small, custom ESP32 projects for me. The project involves building IoT devices with the following essential functionalities: - WiFi connectivity: This is crucial for the device to connect and communicate within a network. - Sensor integration: The device should be able to integrate with various sensors for data collection and processing. - Storage: The device needs to have a storage solution for data logging and retrieval. - Speaker: This will allow the device to produce sound. - GPS: The device should be able to track its location. Ideal candidates for this project would be those with a strong background in IoT device development, particularly with the ESP32. Experience with sensor integration, data storage solu...

I'm experiencing issues with my ESP32 code for LoRaWAN OTAA. Specifically, my device isn't able to join The Things Network (TTN). I've verified that my device credentials and configuration are correct, so I need an expert to help troubleshoot and resolve the issue. Ideal Skills and Experience: - Proficiency in ESP32 programming - Experience with LoRaWAN and TTN - Strong problem-solving skills - Ability to troubleshoot network connection issues - Knowledge of SX1276 module Please reach out if you can assist with this issue.

...Materials (BoM) outlining all components required for the design. o Gerber files for PCB manufacturing. o Firmware code with detailed comments and instructions. o Documentation for circuit schematic, firmware installation, and setup. Skills Required: • Experience in PCB design (schematic creation, component placement, routing). • Strong background in embedded firmware development for microcontrollers ESP32. • Expertise in sensor integration (moisture, temperature, light). • Proficiency in designing and controlling displays (LCD, OLED, etc.). • Knowledge of low power design techniques and energy-efficient systems. • Familiarity with developing interactive user interfaces. Please submit your portfolio with relevant examples of PCB designs and firmwa...

I'm seeking a freelancer to develop Arduino code for controlling the TEF6686 IC and an accompanying, user-friendly Android app that interfaces with an Arduino Nano via USB. The project has a max budget of 100 euros, and I prefer a freelancer who is active and communicative. The Arduino code should: - Control the TEF6686 IC for FM tuning and RDS data - Handle seek functionality - Monitor signal strength - Ensure smooth USB communication with the Android app The Android app, while not overly complicated, should have a simple, intuitive interface with features such as: - Frequency display - Tuning controls (with presets) - RDS display (program name and program info) - Signal strength bar - USB status (connected/disconnected) The app should be similar to a stock ...

...looking for a arduino firmware engineer to create a firmware for an ArtNet node with DMX/RDM support based on the RP2040 + RS485 transceiver. This project is similar to the typical artnetnodes available on GitHub for ESP32 or ESP8266. Key Responsibilities: - Develop firmware to support ArtNet4(Poll/Reply, ArtDMX, ArtRDM) as a gateway to DMX and RDM, with RDM handling efficiency as a priority for 1 universe/RS485 connection - Ensure the DMX settings are fixed for maximum performance for RDM, with only 1-2 DMX frames per second. - Implement USB network communication instead of WiFi (with DHCP server on RP2040 and fix host adress 2.2.2.1 and 2.2.100+ for the PC client) - No web server for configuration required. Ideal Skills and Experience: - Extensive experience with a...

Scanner App only. Login only Scanner

ESP32 Arduino Sketch and Google Sheets Script We are looking for a skilled developer to create a simple ESP32 Arduino sketch along with a script for Google Sheets. The purpose of the following system will be to determine when an ESP32 starts running and when it stops running and to determine how long it was running for and how long it was not running for. Create an Arduino sketch running on an ESP32. The sketch will send a message to a Google Sheet every ten seconds. Create a Google Sheet to receive the messages and record the time when messages are received. The first message after a period of not receiving any messages will be a start time. When new messages are received, the time elapsed between the start time and the current message ...

We are looking for an experienced Firmware developer and Electronics Engineer (EE). You will continue the development of an STM32 design and a seperate ESP32 design - both with BLE. Also you will continue the electronics design of the board, simulate the circuits and layout a PCB, while communicating with clients, vendors and the team. You will be working for a small StartUp and directly report the the CEO, who is also an EE. We are looking long-term to acquire a Senior EE for a permanent role in the team. We run the company fully remote, online and have staff located globally. So you can locate yourself as you see fit. We are demanding as we do require high quality work, there is no place for an EE that cannot or will not do the detailed work and limit the number of m...

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in

I'm looking for a skilled freelancer to help me with an Arduino WiFi project aimed at home automation. The main focus of this project is to control my window vent cover using an Arduino WiFi module and a linear actuator. Key Requirements: - Use of Arduino WiFi module to facilitate control over vent cover. - Ensuring the control mechanism allows for vent to be opened and closed. Ideal Skills and Experience: - Proficiency in Arduino R4 UNO wifi installation, programming and electronics. - Prior experience with home automation linear actuator projects will be a significant advantage. - Ability to deliver a reliable and user-friendly control system. - Ability to teach what was required both programmatically and electronically to achieve a functional system

...sign-in with email. - A document scanner with text recognition (OCR) capabilities. - Document download available as Pdf, jpg, png, docx. - Find a paper with text input or voice. (Ai use) - A sharing feature allowing users to share documents with other accounts. - Calendar for appointments. Ideal candidates for this project should have: - Extensive experience in developing secure, user-friendly applications for both Web and Mobile. - Proficiency in implementing end-to-end encryption and Two-factor Authentication systems. - Expertise in integrating OCR capabilities into a document scanning feature. - A keen understanding of voice input integration. Please note that the project does not require basic image capture functionality for the document scanner. The abi...

...System: Energy Management: Solar panels (10-20W) with MPPT controller. Three 12V, 10Ah LiFePO4 batteries with automatic rotation to maximize lifespan. Voltage regulators to power components at 5V and 3.3V. Motion Detection and Processing: PIR sensors to trigger system activation. OV2640 cameras controlled by microcontrollers (ESP32 or STM32) and managed using MOSFETs. AI Processing: Coral Dev Board Micro for real-time inferences. Communication Modules: Wi-Fi (ESP32), LoRaWAN (Heltec LoRa), or 4G/LTE (SIM7600), selectable based on site requirements. System Monitoring and Management: Secondary microcontroller for managing energy, environmental sensors (temperature and humidity), and communication modules. Freelancer Responsibilities: Design the system PCB considering ...

I am seeking a highly skilled ...extensive hardware and software experience in managing 230V AC and DC current power switching. The project involves controlling heating elements through an Arduino ESP32 platform. Key Project Features: - Control: The system will primarily control heating elements. - Efficiency: A major focus will be on energy efficiency, so expertise in developing energy-efficient systems is crucial. - Remote Management: The system is to be controlled via a web interface, so experience in web-based control systems is a plus. Ideal Skills: - Proficiency in hardware and software development, particularly in power switching. - Extensive experience with Arduino ESP32. - Strong background in developing energy-efficient systems. - Previous work with...

I'm seeking a skilled professional to assist with integrating my Guition ESP32-S3-4848S040 board into SquareLine Studio for the Arduino IDE. The ultimate goal is to produce a complete set of files that adhere to the specified requirements. Here are links to descriptions of a board, specifically mine is ESP32-S3, ST7701, GT911, and requires the CH340 driver: General description: Additional information about the board: I am looking for a fully functional set of files for SquareLine Studio that meet the requirements outlined below: Ideal Skills and Experience: - Proficient in C/C++ programming - Experienced in