Circuit Designers untuk dipekerjakan di Romania
Menampilkan 30 hasil
Freelancer yang didanai
-
Experienced embeded hardware-software engineer ofering product design and prototiping services. Experience of over 9 years as follows: -over 9 years of experience in schematic and PCB layout design, including power or high speed circuits, up to 16 layers -8 months in an assembly house, working as a testing and fault...Experienced embeded hardware-software engineer ofering product design and prototiping services. Experience of over 9 years as follows: -over 9 years of experience in schematic and PCB layout design, including power or high speed circuits, up to 16 layers -8 months in an assembly house, working as a testing and fault finding technician -2 years in Automotive design, working as Hardware Engineer -over 5 years of experience in 3D CAD modeling, designing various cases for products -over 2years of experience in embedded software, working with STM32, Silabs microcontrollers and Arduino environment -over 3 years of experience in energy storage systems, very familiar with Li-Ion/Polymer and LiFePO4 chemistry. Decided to start freelancing again so I am looking forward to work on exciting products. kurang
Rekrut AndreiVu
-
I am an expert Electronics PCB Design Engineer with 10 years industry experience. I can design and implement analog, digital and high speed circuits, FPGA circuits and write firmware in VHDL and Embedded C. I can design rigid, rigid-flex or flex PCBs, also I can do 3D modelling of electronic components. You can find...I am an expert Electronics PCB Design Engineer with 10 years industry experience. I can design and implement analog, digital and high speed circuits, FPGA circuits and write firmware in VHDL and Embedded C. I can design rigid, rigid-flex or flex PCBs, also I can do 3D modelling of electronic components. You can find a lot of interesting projects on my site: www.deltapcbdesign.com kurang
Rekrut zarnescugeorge
-
I am a hardware developer and layout design engineer with 6+ years experience working with high-bandwidth interface standards (CSI, GMSL, FPD-Link, OpenLDI), SerDes pair with both LVDS and single ended data transmission standards, LED drivers, power supplies circuits (buck, boost, LDO). I also have some experience in...I am a hardware developer and layout design engineer with 6+ years experience working with high-bandwidth interface standards (CSI, GMSL, FPD-Link, OpenLDI), SerDes pair with both LVDS and single ended data transmission standards, LED drivers, power supplies circuits (buck, boost, LDO). I also have some experience in IoT products development with modules as BLE, CAN, GNSS, Ethernet PHY, LTE Cat M1/NB1, WWAN. I finished my Bachelor degree in Applied Electronics (2013-2017) and Masters degree in Computer and Communication Networks (2017-2019), Faculty of Electrical Engineering and Computer Science at "Ștefan cel Mare" University of Suceava, Romania. The below PCB projects are just simple designs done during my Bachelor's for TIE which is a design of electronics modules and assemblies contest for students where I won 1st place. kurang
Rekrut SirScofield
-
More than 20 years experience in PCB Layout designing. Good knowledge in HW design, EMC standards, High-Speed with SI and PI design. I pay attention to different signal lines routing to reduce all parasit effects. Working in special with Altium Designer, finished over 300 custom projects until now. Working also with...More than 20 years experience in PCB Layout designing. Good knowledge in HW design, EMC standards, High-Speed with SI and PI design. I pay attention to different signal lines routing to reduce all parasit effects. Working in special with Altium Designer, finished over 300 custom projects until now. Working also with the simulation and optimization for the PCB boards. I WILL ACCEPT ONLY projects that I can finish !! kurang
Rekrut adutzu07
-
Software engineer with 6+ years of Embedded systems development, 4+ Software Developer for Automotive+Safety. CORE SPECIALITIES: • Microcontroller firmware in C, Python, Assembly • System/Software Architecture • PCB Designing&layout + efficient BOM • Technical Writing • Unit Testing (Cantata, Tessy, own framework) •...Software engineer with 6+ years of Embedded systems development, 4+ Software Developer for Automotive+Safety. CORE SPECIALITIES: • Microcontroller firmware in C, Python, Assembly • System/Software Architecture • PCB Designing&layout + efficient BOM • Technical Writing • Unit Testing (Cantata, Tessy, own framework) • doxygen - automated code documentation generator • ISO26262 • Altium Designer/Circuit Maker Recent updates: • Bluetooth 5.1 Direction Finding • openEMS • KiCAD • FreeCAD • 3D printing • Machine learning kurang
Rekrut a42l
-
As a Mechatronics Engineer with over 5 years of experience in mechanical design and 3 years of experience in electrical systems, I have designed 3 fully 3D printable robotic arms and 2 servo stepper systems that are currently being used for didactic activities at the Politehnica University in Bucharest. I have also...As a Mechatronics Engineer with over 5 years of experience in mechanical design and 3 years of experience in electrical systems, I have designed 3 fully 3D printable robotic arms and 2 servo stepper systems that are currently being used for didactic activities at the Politehnica University in Bucharest. I have also completed an internship at EPE Satul Mare and have expertise in using Arduino and Raspberry Pi for electrical systems. Overall, I have a strong background in both mechanical and electrical engineering and have demonstrated my abilities through my design projects. kurang
Rekrut Luca2003
-
INTJ with a need to keep creating tech (and non-tech) systems. For the past 15 years I've been a "jack of all trades and master of some", building hardware and software systems for industry. And interesting new challenges never stop coming up! Strong background in embedded systems HW and FW development, mostly for...INTJ with a need to keep creating tech (and non-tech) systems. For the past 15 years I've been a "jack of all trades and master of some", building hardware and software systems for industry. And interesting new challenges never stop coming up! Strong background in embedded systems HW and FW development, mostly for industrial applications and compressed air quality measurement. This involves mechanical and PCB design, ASM/C/C++ programming on 8/16/32bit hardware, RTOS, communication protocols, etc. Good competence in signal processing (statistical, frequency and time-frequency domain) i.e. MATLAB. Experience with LabView / TestStand and NI equipment for test and automation. kurang
Rekrut harfaspaul
-
Electronic engineer in automotive field. I design circuits with minimum risk of failure. Circuit design, simulation, schematic creation.Electronic engineer in automotive field. I design circuits with minimum risk of failure. Circuit design, simulation, schematic creation. kurang
Rekrut Claudius1
-
Experienced Aerospace Engineer with a strong background in mechanical design and structural analysis. Proficient in AutoCAD, CATIA V6, and finite element analysis, I offer high-quality engineering solutions for complex projects. My expertise includes optimizing and modernizing structures, detailed technical drawings,...Experienced Aerospace Engineer with a strong background in mechanical design and structural analysis. Proficient in AutoCAD, CATIA V6, and finite element analysis, I offer high-quality engineering solutions for complex projects. My expertise includes optimizing and modernizing structures, detailed technical drawings, and collaborating on multidisciplinary teams. Committed to delivering innovative and efficient designs, I am eager to help bring your projects to life with precision and professionalism. kurang
Rekrut anamariab5
-
Below you can find my some information about me. I am eager to work with you! Summary • PCB Designer with over 3 years of experience in designing PCB’s using Altium Designer Key skills • Designing PCB’s for Automotive Applications using Altium Designer • Defining PCB stack-up and PCB Design rules • PCB Layout for...Below you can find my some information about me. I am eager to work with you! Summary • PCB Designer with over 3 years of experience in designing PCB’s using Altium Designer Key skills • Designing PCB’s for Automotive Applications using Altium Designer • Defining PCB stack-up and PCB Design rules • PCB Layout for HDI PCB boards with 12-16 layers • Routing various interfaces like: SPI,I2C,UART,CAN,LIN,ETHERNET,USB,PCI EXPRESS,eMMC,DDR4, and so on • Altium Component Library Administration (Creating symbols,footprints,reviews for the electronic components that are needed to be used in projects) • Hardware Testing for Automotive PCB’s • Analog behavioral modeling of discrete components • Designing Switched Mode Power Supplies from schematic to layout Education 2015-2019 Faculty of Electronics, Telecomunications and Information Technology - Bachelor Degree 2011-2015 I.C.Bratianu National College – High School Diploma Languages English Fluent spoken & written Romanian Native Interested in Design high quality, complex PCB’s for the customer kurang
Rekrut xerxes95
