探索

Industrial Design

Product Sourcing

0.0

(0条评论)

您正在关注

关注用户错误。

该用户不允许他人关注他们。

您已经关注了这个用户。

您的会员计划仅允许0个关注。升级在此。

成功取消关注

取消关注用户错误

您已成功推荐

推荐用户错误。

出问题了，请刷新页面并重新尝试。

电子邮箱已成功验证。

Ferhat G.

@vagabond32

0.0

0

0.0

0.0

0%

Designer_36

$35 USD / 小时

・

Turkey (5:04 下午)

・

加入于四月 28, 2014

$35 USD / 小时

・

I am looking forward to being hired by you for all your 3D Modelleme jobs. I have an exquisite blend of experience in the areas of Çizim and Teknik Çizim and so my service will prove to be useful for your projects. I have a distinguished career as a 3D Modelleme Animator and Endüstriyel Tasarım Consultant. I can comfortably handle Çizim, Teknik Çizim and Endüstriyel Tasarım. I also hold experience in Makine Öğrenimi. I am ready to start working on your projects.

验证

查看所有Industrial Design Engineers在Turkey

文件夹

文件夹

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.

CROPLİNE (LEATHER PRUNING LINE)

INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.

CROPLİNE (LEATHER PRUNING LINE)

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It was designed and manufactured by looking at the samples for the transportation of cross bikes and camping equipment on special orders....

Camper Trailer for 3 Motors Bike

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

It is a stacking conveyor belonging to the sanding lines used in chipboard - MDF facilities. The project is ready for manufacturing. If requested, technical drawings can also be prepared for manufacturing.

MDF Stacking Conveyor

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

IT IS A ROLLER CONVEYOR THAT ALLOWS THE PRODUCTS STACKED IN CHIPBOARD AND MDF FACILITIES TO BE TAKEN BY FORKLIFT. THE PROJECT INCLUDES FULL MANUFACTURING DETAILS.

ROLLER CONVEYOR H=700 - L = 2975

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

You can automatically design and visually control the molds needed for Auger Flights. Parametric software is prepared using iLogic in Autodesk Inventor. It works in 2023 and above versions. The images are photographs of the parametric software, molds prepared with the software, manufactured machines and parts manufactured with the machine. This software and machine designs have been sold to different countries. If requested, anyone can test the software by connecting to my computer remotely. And also get detailed information.

Auger Flight Forming Machine Mold Design Parametrik Design

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

DESIGNED AND MANUFACTURED TO INSTALL BRAKE CALIPERS

CALIPER ASSEMBLY STATION

INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.

CROPLİNE (LEATHER PRUNING LINE)

INCREASE PRODUCTION BY ENABLEING THE PRUNING PROCESS BETWEEN THE MEATING AND SPLITTING MACHINE FASTER.

CROPLİNE (LEATHER PRUNING LINE)

修改已保存

0.0 · 0 Reviews

评论

这里没有评论！

Machine Manufacturing

7月, 2004 - 9月, 2008

•

4 年, 2 个月

Kurçelik Makina

7月, 2004 - 9月, 2008

•

4 年, 2 个月

Particleboard and MDF plants manufacturing conveyor (Helical conveyors, belt conveyors, chain conveyors, Elevatör v.b.)

7月, 2004 - 9月, 2008

•

4 年, 2 个月

automotive

9月, 1997 - 6月, 1998

•

9 个月

TOFAŞ - FİAT

9月, 1997 - 6月, 1998

•

9 个月

intern engine production unit Laboratory measurements of the quality of input materials

9月, 1997 - 6月, 1998

•

9 个月

Selçuk Üniversitesi

2001 - 2005

•

4 年

75

Turkey

2001 - 2005

•

4 年

Computer Aided Design and Modeling

1998

Union

Computer Aided Design - Drawing - Modeling and creating technical drawings

1998

邀请已发送成功！

谢谢！我们已通过电子邮件向您发送了索取免费积分的链接。

发送电子邮件时出现问题。请再试一次。

加载预览

授予地理位置权限。

您的登录会话已过期而且您已经登出，请再次登录。