Microprocessor Programming for Hydraulic Machine

$15-25 USD /hora

Abierto

Publicado

hace alrededor de 2 horas

•

Termina en 6 días

$15-25 USD /hora

Seeking Specialist for Microprocessor Programming in Hydraulic Machinery We are looking for an expert to program a microprocessor to control a newly patented small hydraulic machine (The Wave Wizard). The primary responsibility of this project is to ensure the microprocessor effectively monitors, regulates hydraulic flow and pressure, transforming it into a 'smart' device during its operation. The Hydraulic Machine must be compact to be retrofitted on existing machines now in the market. (approximately 2” x 3” x 6” see concept drawing). AutoCAD, SolidWorks or equivalent experience by the same party or a second party will be required. We have a machine shop available to build and test prototypes. Project Requirements The project necessitates that the microprocessor interacts seamlessly with the following components: • Pressure sensors and solenoid valves • Flow sensors and proportional valves Operational Specifications The machine should be capable of adjusting time, pressure, and distance of a yet to be fully developed device based on pressure readings from the previous cycle, operating at a 100% duty cycle. Additionally, the system must: • Export data for analysis • Receive commands and overrides from a cloud source Ideal Candidate Profile We are seeking candidates with the following qualifications: • Proven experience in microprocessor programming, particularly in controlling hydraulic systems • Proficiency in working with pressure sensors, solenoid valves, flow sensors, and proportional valves • Ability to make the system fully automated and capable of monitoring its performance In addition, same party or separate party with machine design experience to create BP for my local manufacturer. Microprocessor Selection The type of microprocessor for this project has yet to be determined. We welcome input on suitable options that can meet the project's demands. Next Steps We have additional information available for candidates once a connection is established. For now, we are attaching a a compendium of the current state of the project as well as a description of the operational parameters. We look forward to collaborating with a skilled developer to bring this innovative project to fruition. Thanks for your interest. Dale Petts Kadent Solutions, LLC 978-400-6025

PLC & SCADA

Electronics

Electrical Engineering

Microcontroller

Verilog / VHDL

ID del proyecto: 39004669

Información sobre el proyecto

15 propuestas

Abierto para recibir ofertas

Proyecto remoto

Activo hace 2 horas

Presenta tu oferta

Monto de la oferta

USD

Dirección de email

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto

Cobra por tu trabajo

Describe tu propuesta

Es gratis registrarse y presentar ofertas en los trabajos

15 freelancers están ofertando un promedio de $23 USD /hora por este trabajo

@amelectronics

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.

$30 USD en 20 días

4,8

(79 comentarios)

7,3

@AwaisChaudhry

Hello Dale, I understand you are looking for an expert to program a microprocessor for your new hydraulic machine, The Wave Wizard. My approach will ensure the microprocessor effectively monitors and regulates hydraulic flow and pressure, making the machine not just automated but truly smart during its operation. I have extensive experience in programming microprocessors, working specifically with hydraulic systems, pressure sensors, solenoid valves, and flow sensors. This project’s needs align perfectly with my skills. I can also provide assistance in selecting the right microprocessor that fits the machine's size and functionality requirements. I’m eager to collaborate with your team and utilize the machine shop for testing prototypes to ensure the design meets your operational specifications and can be retrofitted on existing machines. What specific microprocessor options are you considering for The Wave Wizard, and do you have any preferences regarding power requirements or interface capabilities? Thanks, Muhammad Awais

$25 USD en 25 días

5,0

(2 comentarios)

5,8

@AtwaArt

Hello Sir, I am excited to propose my expertise in microprocessor programming for your innovative project, 'The Wave Wizard.' I specialize in developing microprocessor systems for hydraulic machinery, ensuring efficient monitoring and regulation of hydraulic flow and pressure to create a 'smart' device. My experience includes seamless integration of pressure sensors, solenoid valves, flow sensors, and proportional valves to optimize machine performance. I am proficient in AutoCAD and SolidWorks, enabling me to design compact retrofitting solutions for existing machines. Additionally, I have a proven track record in creating fully automated systems capable of data export for analysis and cloud-based command reception. Looking forward to the opportunity to collaborate on this groundbreaking project. Warm Regards, LandMark Engineering

$15 USD en 33 días

5,0

(1 comentario)

3,2

@studiogo07

Hello, We are excited about the prospect of collaborating to program the microprocessor for 'The Wave Wizard' hydraulic machine. The project aims to create a smart device by effectively monitoring and regulating hydraulic flow and pressure. The compact design, to be retrofitted onto existing machines, requires expertise in AutoCAD or SolidWorks. We have a machine shop for prototype building and testing. The microprocessor must interact seamlessly with pressure sensors, solenoid valves, flow sensors, and proportional valves. The machine should adjust time, pressure, and distance based on pressure readings, operating at a 100% duty cycle. It must also export data for analysis and receive commands from a cloud source. We seek candidates experienced in microprocessor programming, working with hydraulic systems and related components, and automating system monitoring. Additionally, machine design expertise is desired for creating a BP for local manufacturing. We are open to suggestions for the microprocessor selection. Let's discuss further details. Could you share insights on your preferred timeline for the project's completion? Best regards, StudioGo

$15 USD en 34 días

5,0

(1 comentario)

2,6

@rehman1802986

Hey Dale P., I just finished reading the job description and I see you are looking for someone experienced in Microcontroller, PLC & SCADA, Electrical Engineering, Electronics and Verilog / VHDL. This is something I can do. Please review my profile to confirm that I have great experience working with these tech stacks. While I have few questions: 1. These are all the requirements? If not, Please share more detailed requirements. 2. Do you currently have anything done for the job or it has to be done from scratch? 3. What is the timeline to get this done? Why Hire Me? 1. I have done more than 150 major projects. 2. I have not received a single bad feedback since the last 5-6 years. 3. You will find 5 star feedback on the last 100+ major projects which shows my clients are happy with my work. Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) I will share with you my recent work in the private chat due to privacy concerns! Please start the chat to discuss it further. Regards, Aziz

$15 USD en 50 días

0,0

(0 comentarios)

0,0

@sameer0592

With my extensive experience in microprocessor programming and control systems design, I am confident that I have the skills necessary to masterfully handle the Wave Wizard project. I specialize in precisely what this project requires: programming microprocessors to expertly monitor and regulate hydraulic flow and pressure, essentially transforming it into a 'smart' device. My proficiency in Solidworks and AutoCAD ensures I can work with your designs while simultaneously preserving its compact nature and allowing for easy retrofitting – making it an ideal choice for existing machines. The thorough understanding I bring from years working with pressure sensors, solenoid valves, flow sensors, and proportional valves means that my solutions aren't just limited to programming. They extend to the very core of machinery operation; ensuring that crucial data for analysis is exported seamlessly while also enabling commands and overrides from a cloud source. .

$20 USD en 40 días

0,0

(0 comentarios)

0,0

@thomasa61

Hi Dale P., I’ve carefully checked your requirements and really interested in this job. As a licensed PE & Architect, I have rich experienced in Electronics, Verilog / VHDL, PLC & SCADA, Microcontroller and Electrical Engineering. I can complete your project on time and your will experience great satisfaction with me. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details. Best Regards, Thomas

$40 USD en 40 días

0,0

(0 comentarios)

0,0

@AITSoft

Hello Dale, I’m excited about the opportunity to work on programming the microprocessor for The Wave Wizard hydraulic machine. I understand that the goal is to create a compact, smart device capable of precise operation by monitoring and regulating hydraulic flow and pressure. I have extensive experience in microprocessor programming, particularly with hydraulic systems, and I’m comfortable working with pressure sensors, solenoid valves, and flow sensors to ensure seamless operation. In addition, my background includes machine design experience, which will aid in creating the necessary Bill of Materials for local manufacturing. I’m also ready to collaborate on selecting the most suitable microprocessor to meet your project’s needs. My goal is to provide a fully automated system that continuously monitors its performance and meets all operational specifications. What specific performance parameters should the microprocessor monitor and adjust during operation? Thanks, Shamshad

$25 USD en 24 días

0,0

(0 comentarios)

0,0

@redbrickamerica

Hello Dale Petts, I am MD NAJMUL, leading an American Licensed Engineers team with extensive experience in microprocessor programming and machine design. Our expertise aligns perfectly with your project requirements for controlling hydraulic systems using a microprocessor. We specialize in utilizing AutoCAD, SolidWorks for compact and efficient designs. Our team is well-versed in integrating pressure sensors, solenoid valves, flow sensors, and proportional valves seamlessly into microprocessor-controlled systems, ensuring optimal performance and automation. We are equipped to develop a solution that adjusts time, pressure, and distance based on real-time data, with the ability to export data for analysis and interact with cloud sources. We are prepared to take on the challenge of programming the microprocessor for 'The Wave Wizard' and collaborating with your team to bring this innovative project to life. Looking forward to discussing the project details further. Cheers, RedBrick American Engineering

$25 USD en 22 días

0,0

(0 comentarios)

0,0

@jonathanm892

Hello, I understand the intricacies of hydraulic systems and microprocessor programming, which makes me an ideal fit for your project. I have specialized in Electrical Engineering, Electronics, Microcontroller, and PLC & SCADA - all of which are extremely relevant to transforming the Wave Wizard into an intelligent device. My experience in controlling hydraulic systems with microprocessors will help me effectively program the microprocessor to monitor and regulate the hydraulic flow and pressure in your machine. Moreover, my familiarity with working on pressure sensors, solenoid valves, flow sensors, and proportional valves will ensure seamless interaction between the microprocessor and these components. I have also worked on machines that involved adjusting time, pressure, and distance based on previous cycle readings – a skill very much needed in your project as well. Additionally, I can make your system fully automated and capable of self-performance monitoring. Another unique advantage that I bring is my expertise in AutoCAD, SolidWorks or their equivalent which is essential for creating detailed designs for compact retrofitted machines like The Wave Wizard. Furthermore, my proficiency extends to data exporting for analysis and cloud-based command reception making this project a perfect overlap of my skills with your requirements. Collaborating with my team at Kadent Solutions, LLC will ensure a comprehensive end-to-end solutio Thanks!

$20 USD en 17 días