Nastran solidedgetrabajos

We are a manufacturing firm interested in converting our 2D CAD drawings into 3D CAD drawings. We would like the 3D parts to interact with each other to create a complete model of our end product th...CAD drawings. We would like the 3D parts to interact with each other to create a complete model of our end product that will give us the ability to test it in simulations. The product is a simple piece of mechanical engineering with a triple reduction gearbox and 3 moving parts on the structure. Small parts of the structure will have to be modified. Majority of 2D drawings were completed in SolidEdge a few are only available in pdf format because they await minor redesigns as mentioned above. We would prefer the job to be completed in SolidWorks but we will entertain other progra...

I need to find someone to help me draw a 3d cad model for my project on either alias or solidedge/solidwork, i need the original cad file as well for 3d print.

...Demonstrate your understanding of the difference between linear and non-linear analyses with respect to both geometric non-linearity and material non-linearity. With regard to the Nastran solver, evaluate the differences between the use of solvers SOL106 and SOL 601, 106. This report should focus NX siemens background as the sujbect. (this section should be 1000-1500 words) 2) Optimisation Evaluate the optimisation capabilities of Finite Element Analysis software. Demonstrate your understanding of the difference between ‘design optimisation’, ‘geometric optimisation’ and ‘topology optimisation’. With respect to the Nastran solver, evaluate the differences between using solvers SOL101 and SOL 200 for optimisation (this section shou...

Design Engineering and Finite Elemental Analysis for Mining and Heavy Equipment Applications. Software Preferred: Autodesk Inventor AutoCAD, FEMAP, NASTRAN.

Non-linear analyses (technical report) To do some research and to Evaluate the non-linear analysis capabilities of Finite Element Analysis software (NX Siemens). Demonstrate your understanding of the difference between linear and non-linear analyses with respect to both geometric non-linearity and material non-linearity. With regard to the Nastran solver, evaluate the differences between the use of solvers SOL106 and SOL 601, 106. This report should focus NX siemens background as the sujbect. Report should be 1000-1500 words Research and assess the value of these techniques to design in modern industry, giving examples where possible.

Non-linear analyses (Technical report) To Evaluate the non-linear analysis capabilities of Finite Element Analysis software in NX Siemens. Demonstrate your understanding of the difference between linear and non-linear analyses with respect to both geometric non-linearity and material non-linearity. With regard to the Nastran solver, evaluate the differences between the use of solvers SOL106 and SOL 601, 106. (1000 – 1500 words) Research and assess the value of these techniques to design in modern industry, giving examples where possible

i need someone who can do the simulations on thermal and stress analysis. i will also need the report for this simulations and a step by step teaching for me on how to do this simulation. the detail drawings and formulas will be given. i need this urgently!! more details i will explain to those who can do this for me.

Details will be given to the chosen candidate. Its urgent so please apply only if you can do it in like one night.

i need someone who can do the simulations on thermal and stress analysis. i will also need the report for this simulations. the detail drawings and formulas will be given. i need this urgently!! more details i will explain to those who can do this for me.

i need someone who can do the simulations on thermal and stress analysis. i will also need the report for this simulations. the detail drawings and formulas will be given. i need this urgently!! more details i will explain to those who can do this for me.

...of aerodynamic forces) and a transverse follower force (represents the engine thrust). requirements: 1- setting up the governing equation of motion using newtons low or hamilton principle 2- solving the coupled equations(PDE's) using Galerkin's method to find the divergence speed, flutter speed, effect of viscoelasticity,..... 3- simulating the problem using FEA software like ansys or nastran, and comparing the analytical results to FEA result with acceptable agreement. notes: - - related papers are available - I have derived the PDE's, but they are required just to make sure - chosing the viscoelastic material and model ( maxwell, kelvin,...) is up to you - chosing the wing type ( Golland, AGARD,...) for the parametric study is up to you - Theodor...

We are looking for a very skilled FEA analysis freelancer to conduct a non-linear dynamic FEA analysis of our new carbon frame. Knowledge of Downhill/BMX frames are an EXTREME PLUS!!

Looking for 3d modeling support for on going project, if you have experience in 3d modeling with mechanical engineering background please bid, preferred software is solid edge. if you have experience in solid edge at least 4 years of experience then bid. detail will be discussed later and detail file will be provide.

...effective performance with growth and recognition. My studies at the university has helped me acquire a sound overall knowledge of in-demand technologies and leading edge engineering concepts focusing on building, testing, designing and quality management of mechanical systems. I strongly believe that my proficiency in formulating automated solutions using AutoCAD, Pro-E, ANYSIS,CATIA, SOLIDWORKS, SOLIDEDGE, FLUENT, along with a sound knowledge of quality management would be of great value and significance to your firm. Aside from the outstanding academic background, I have also experienced participating in applied classroom learning and several successful projects. My leadership skills and sound judgment allow me to interact productively with people of different backgrounds. I...

I require urgent work to be compleated in solidedge that must be compleated tomorrow before midnite. I have two very simple parts that need modaling in solid egde, i currently have the modal compleate on solidworks but due to time restraints i am unable to compleate. I have attached the solidworks file and pdf files of the parts, i also require that 5 features to be used over the two parts (excluding: Extrude, cut. Etc) and a 1500word report on why and how the five features where used. There is alot of freedom on how you want to create this modal, as long as 5 features are used. I had compleated this modal on solidworks but have found out the part had to be done on solidedge and am restricted with time. I can provide all details that you require, dimensions etc The ...

Hi I need to do some ansys and solidwork is my I can explain to you in detail. And give you my drawings...rig to validate the analysis. 3. Propose a transformation to scale up to real industrial use. 4. Develop a team of two to three small scale climbing robots that use permanent magnet adhesion and the optimum boom structure solution obtain earlier. Demonstrate on a steel wall with a suitable scaled down payload. The challenge is to establish the right framework for the analysis. SimMechanics or SolidEdge/Autocad or similar should be used for verification of the analysis. Investigate boom/truss structures that will be lightweight yet rigid. Perform an analysis of climbing robot designs w.r.t. sliding/anti-sliding forces and overturning/anti-overturning moments.

The aim is to develop a prototype wall climbing robot/s that can carry a long boom to deploy a scanning arm to inspect wind blades. The...to validate the analysis. 3. Propose a transformation to scale up to real industrial use. 4. Develop a team of two to three small scale climbing robots that use permanent magnet adhesion and the optimum boom structure solution obtain earlier. Demonstrate on a steel wall with a suitable scaled down payload. The challenge is to establish the right framework for the analysis. SimMechanics or SolidEdge/Autocad or similar should be used for verification of the analysis. Investigate boom/truss structures that will be lightweight yet rigid. Perform an analysis of climbing robot designs w.r.t. sliding/anti-sliding forces and overturning/anti-overturnin...

Hi Hristo, I need the sketches I made built into a 3D model - preferrably Solidedge. It will be moulded into a prototype on a 3D printer. I also need them rendered, plain grey/white at first then rendered properly, with cover materials. As promised, I only got to it now. I am not in a hurry, so enjoy. There is an error uploading the files, so I will email them to you tonight. I have already sent my 2 sketches to you I think. These are the ones to be worked off. Thanks.

I want someone who can copy an existing e...enclosure is for a product called "raspberry pi". Please google raspberry pi if you dont know about it already. The winner of the project will be provided with the pictures of the existing enclosure from various angles. You may also PM me for a sample picture before placing your bid. You will also be provided with the engineering drawing and also a solidedge/solidworks 3D model of the PCB. The project deliverable's should include: 1. Solidedge or solidworks models of the enclosure 2. Properly dimensioned engineering drawing (in pdf, dxf etc) Milestones: 30%-initial, 70%-final. Final milestone would be released after the design is 3D printed and verified to fit correctly. Please feel free to contact me ...

Hi, We're looking for someone who can help with design work on light composite sandwich constructions that will be subject to low speed impact by large masses. We currently use Femap for pre/post along with Laminate Tools. We only have implicit solvers at the moment (NEi Nastran) but will probably get LS-Dyna solvers for this work. Can you send us a copy of your CV and give more details if you've done work with composites? What programs do you use? Also, we don't think that existing material models for woven composites are likely to be that accurate so we'll probably have to write our own. Do you have any experience in this area? We work closely with Imperial College so have access to the relevant equipment to determine material properties at suitable strain ...

...who are already tightly scheduled with final-exams or campus interviews. iii. This type is feasible for those who don’t have such constraints. b. Design Projects: i. CAE Projects – Stress analysis, dynamic analysis aero, auto or mechanical systems can be done through these projects. New design, Improving performance, optimization can be accomplished. FEM based software like ANSYS, NASTRAN, RADIOSS, HYPERMESH etc. can be used. ii. CFD Projects – Flow analysis, Thermal analysis, Aerodynamics improvement are the typical projects. This uses software like FLUENT, STAR-CCM+ are used for CFD analysis. iii. Flexibility and accuracy are the major advantages in this type of projects. iv. However it needs some additional training. To know more… Job Opport...

FEA analysis of chassis frame using hypermesh/ ansys or nastran- static ,modal,shock,vibration results required in one week.

Train the trainers and students on various CAD tools Viz..., AutoCAD 2009,2010,2011,2012,2013, Pro/Engineer 4.0, 5.0, Creo/Elements, SolidWorks, SolidEdge, CATIA, NX 7.5, ANSYS, GD&T

Looking for FEA of Solidworks model of relay with FEMAP (NX NASTRAN) under vibration, acceleration and heating loads

The 420D has pilot stabilizer controls, pilot loader controls, high rotation backhoe linkage, and a hydraulic pump that delivers fluid at a rate of 43 gallons (163 L) per minute (GPM) at a system pressure of 3,300 pounds per square inch (PSI) (22,753 kPa) Made in SolidEdge ST2

Hi, Greetings for the d...Composite) of Primary Structures • Airbus Stress Analysis methods • Exposure Fatigue and Damage Tolerant Analysis • Exposures to Airbus tools such as ISAMI, ISSY, and DT tools is an added advantage. • Airbus Stress Analysis methods • Crash and Impact analysis using standard tools • Hand calculation methodologies Desired SKILLS: • Patran/Hypermesh • Nastran analysis • ISAMI, ISSY, and DT tools • NASTRAN • PATRAN • Airbus Stress Analysis methods • Airbus Stress Analysis methods • B. Te...

PLS READ ATTACHED FILES AND PICTURES AND LET ME KNOW IF YOU CAN DO IT ON TIME I DONT HAVE BIG BUDGET FOR THIS PROJECT. LET ME KNOW IF YOU HAVE UNDERSTOOD THIS PROJECT FULLY. MORE INFO: To gain basic knowledge about car body structure. v More extensive reading for gain knowl...extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identification theory. v Understanding non destructive testing on vibration. v Explore various ways of modeling spot welds. v Numerical simulation of welding structure using NASTRAN computer software. I have attached project description and I will email you the the structure that I have to model by using Patran and Nastran computer...

title FE Modelling and Experimental Study of Spot Welds in Car Body Components v To gain basic knowledge about car body structure. v More extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identi...extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identification theory. v Understanding non destructive testing on vibration. v Explore various ways of modeling spot welds. v Numerical simulation of welding structure using NASTRAN computer software. I have attached project description and I will email you the the structure that I have to model by using Patran and Nastran c...

title FE Modelling and Experimental Study of Spot Welds in Car Body Components v To gain basic knowledge about car body structure. v More extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identi...extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identification theory. v Understanding non destructive testing on vibration. v Explore various ways of modeling spot welds. v Numerical simulation of welding structure using NASTRAN computer software. I have attached project description and I will email you the the structure that I have to model by using Patran and Nastran c...

title FE Modelling and Experimental Study of Spot Welds in Car Body Components v To gain basic knowledge about car body structure. v More extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identi...extensive reading for gain knowledge about vibration. v To establish reliable and efficiency FE model. v Learn basics of structure identification theory. v Understanding non destructive testing on vibration. v Explore various ways of modeling spot welds. v Numerical simulation of welding structure using NASTRAN computer software. I have attached project description and I will email you the the structure that I have to model by using Patran and Nastran c...

Number of pages: 15 (Double Spaced) Number of sources: 7 Deadline: December 30 0:12 Order type: Coursework Category: Aeronautics Academic level: Style: Oxford Preferred language style: English (U.K.) First of all using ANSYS program. The idea of this project is to produce 3 different models on ABAQUS (1-D, 2-D and 3-D) of a horizontal stabilizer. a...Aeronautics Academic level: Style: Oxford Preferred language style: English (U.K.) First of all using ANSYS program. The idea of this project is to produce 3 different models on ABAQUS (1-D, 2-D and 3-D) of a horizontal stabilizer. all the information needed will be attached ---------------------------- Additional information from the client; you can use either ANSYS, NASTRAN fo...

Number of pages: 15 (Double Spaced) Number of sources: 7 Deadline: December 30 0:12 Order type: Coursework Category: Aeronautics Academic level: Style: Oxford Preferred language style: English (U.K.) First of all using ANSYS program. The idea of this project is to produce 3 different models on ABAQUS (1-D, 2-D and 3-D) of a horizontal stabilizer. all the informa...Coursework Category: Aeronautics Academic level: Style: Oxford Preferred language style: English (U.K.) First of all using ANSYS program. The idea of this project is to produce 3 different models on ABAQUS (1-D, 2-D and 3-D) of a horizontal stabilizer. all the information needed will be attached ---------------------------- Additional information from the client; you can use either ANSYS, NASTRAN fo...

We need an application in PCL (Patran Command Language) that can map the positions of the nodes of a Pam-Stamp results file to a Patran mesh of a similar component in order to perform stress analysis over the deformed component rather than the "perfect" geometry from CAD. Please let us know if you are interested. Thank you in advance.

We need an application in PCL (Patran Command Language) that can map the positions of the nodes of a Pam-Stamp results file to a Patran mesh of a similar component in order to perform stress analysis over the deformed component rather than the "perfect" geometry from CAD. We set the project cost to US$1000 and the time to complete to 15 days but we are open to discuss this. Please let us know if you are interested. Thank you in advance. Aldo Toscano

Need to migrate ˜900 drawings from one CAD software, SolidWorks, to another one, SolidEdge, for a manufacturer of food packaging machinery. Please refer to sample attached.

Looking to have some cad work done and possibly 3D modelling. I have an old scanned detailed drawing that I need to upgrade to a DWG and a 3D model. All mechanical work is complete, just looking to have someone transfer my old PDF drawing to a current DWG that I can make minor changes to in the future. Looking for Solidedge, Solidworks or inventor 3D drawings as a secondary aspect of this job. Please specify if you are bidding on 2D only or both 2D and 3D aspects of the job. The file is attached for accurate bidding. Thanks

Need to migrate ˜900 drawings from one CAD software, SolidWorks, to another one, SolidEdge, for a manufacturer of food packaging machinery. Please refer to sample attached.

Por favor, regístrate o inicia sesión para ver los detalles.

I will send scanned paper drawings ans samples (2 plastic parts). A photo of the parts is attached I need SolidEdge Files 3d and drawings. What is your cost per hour?

Require 4 Stress Engineers - Aerospace who have minimum experience of 7 years using NASTRAN, Patran which are used for Structural Analysis, Fatigue Analysis and Stress Analysis of Aircrafts **** Must Have * We want candidates who are familiar with Airbus and Boeing *** The work location will be Europe for our client who is a Tier 2 vendor After 1 year at the end client's location people will have to work in Bangalore Must be Indians who are already now in Europe on contract jobs Sincerely Ponny Varghese ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverab...

High quality 3D CAD systems for feature-based mechanical design have been on the market for many years (e.g. CATIA, SolidEdge, ProEngineer, etc.) but there is still no fully Open Source program that provides the basic solid-modelling features that an engineer needs to design simple mechanical parts. In the attached specifications you will find requirements for a first prototype of a 3D mechanical design application named Open3Design. This prototype will have a simple and easy to upgrade architecture, including only 3 simple types of features. Once this basic architecture exists, it will be rapidly extendedable to provide other desired features. The specifications also include a Use Case which I will use to test the application that you deliver. For this project, the developer...

The project is analysis of a passenger car suspension system. The effect of vehcile dynamics ( pitch, bounce, braking, accelerating, roll,cornering etc.) on the suspension system(Unequal Length A-arm suspension) of a passenger car should be studied, analysis should be carried out using the mechanical s/w autodesk inventor 10, 11, inventor 11 professional or Pro-E , MSC Visual Nastran or Nastran and all the experimental values should be validated with the theoritical values. I will provide the model files which are done using the AUTODESK INVENTOR 10 in 'IGES' format which will be required by you to carry with analysis and simulation. Please look the attached zip files of the model jpeg files. All the vehicle dynamic conditions should be carried out,...