Led circuit design vb6 jobs

I'm looking for a creative graphic designer to create a captivating LED standee poster for my hair salon. Key Elements: - The poster should prominently feature the services we offer. The design should be suitable for a LED standee and able to attract the attention of potential customers passing by. Experience in designing for outdoor, high visibility displays would be an asset. A knack for appealing to a beauty-conscious clientele would be a plus.

Following project for waving flag animations.

Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. ...

I'm looki...product, so it needs to be well-designed and intuitive. Key elements of the interface should include: - Sliders - LED indicators - Buttons - Other visual indicators as shown in the provided PDF The control panel layout can be flexible, but it should be optimized for a touchscreen experience. Additionally, the project will require: - Documented stubs for both input and output values, intended for use with physical hardware (specifically, a Raspberry Pi). - Adherence to our brand colors in the design. Ideal candidates should have: - Proven experience in Flutter development. - A strong understanding of UI/UX principles, particularly for touchscreen interfaces. - Ability to follow design guidelines and brand colors. - Previous experience working with ...

I'm looking for an experienced Arduino programmer and circuit designer to build a simple circuit that can send readings from two fuel optical sensors over the longest range radio available. Key Requirements: - located in Great Britain - Knowledge in Arduino programming and circuit design. - Experience with fuel optical sensors preferred. - Proficient in implementing long-range radio communication, ideally LoRa. - Ability to design a battery-powered circuit. The circuit should take readings from the two sensors, which output 5V when in air and a neutral 3 wire, and send these readings over the radio. The circuit will be powered by a battery.

Output of rectagular signal of 0-40Volts, up to 15Amps. The output signal should be variable in amplitude and also be either unipolar (0-40 Volt, adjustable e.g. from 0 up to 0-40Volt) or bipolar (+/- 20 volt adjustable from 0 to +/- 20 volt), by means of a switch. Will drive a coil of 17mH or 34mH (thick wire on a big, 60cm ...frequency: 0 (off) - 50Hz The control at this stage can be potentiometers, but in the near future will be controled by an MCU, so control signal should be of low voltage (e.g. 0-5 volt) There should also be a protection of the output if there is a shortcut. Based on SG3525 is a good idea. Since the distance is a bit of a problem to exchange ciruits and parts, the circuit and BOM is good enough while showing the good operation of the circuit on a v...

I'm in need of a professional to design a breakout board for the AD5933 chip. The primary application for this chip will be impedance measurement, specifically up to 100 kHz. This project requires a deep understanding of the AD5933 chip, as well as the principles of impedance measurement. Key requirements: - Design a breakout board for the AD5933 chip - Ensure the board is compatible with I2C for communication Ideal candidates will have: - Prior experience with the AD5933 chip - A strong background in electrical engineering and circuit design - Experience designing breakout boards - Proficiency in I2C communication interface Please include examples of similar projects you've completed in your bid.

HELLO EVEYONE :) I NEED HELP. I NEED SOMEONE TO Design a 3D File and Send Me 2 Different (.stl) Files. THE TASK: i Want to CREATE the LOCKING SUPPORT BRACKET ONLY for the 69 mm LENS. It is a: " 3-inch BI-LED TOP LENS LOCKING BRACKET SUPPORT" that holds the lens in place. I will Attach pictures (THE BLACK BRACKET PICTURES) the other 3 pictures are a reference idea where they usually mount. I Tried to take some Measurements to Help, THATS THE BEST WAY POSSIBLE I CAME OUT WITH. THE Lens itself is 69 mm but i don't need the Lens. i just need the Bracket. Looking at the Bracket from the Top View. THE top-hole EMPTY inner diameter is 67 mm measuring it from the inside edge to the inside edge on the opposite side. Around the edge, there is a 1.5 mm layer with thick...

...life a children's book centered around a whimsical 8-year-old Therian named Lilah. The illustrations need to be cartoonish and vibrant, reflecting Lilah's unique characteristics and personality. Key Aspects:- Design of Lilah: It's crucial to emphasize her Therian traits and her whimsical personality in the illustrations. - Number of Illustrations: The book requires between 10-15 illustrations. Ideal skills and experience for this job: - Proven experience in children's book illustration. - Ability to create engaging, cartoonish, and colorful designs. - Experience with character design, particularly for unique or fantastical charactersThe first rays of dawn, painting the sky in hues of rose and apricot, found Lilah already awake. Not tucked beneath her pa...

...5G/6G networks; AI/machine learning; airless tires; AR/VR; autonomous vehicles; blockchain; cloaking and stealth; cloud computing; Crispr; crowdfunding; cryogenic treatment; cryptocurrency; cultured meat; DNA-based analysis; drone technology; electric vehicles; encryption; exoskeletons; face recognition; fintech; foldable screens; gesture recognition; graphene; holography; internet-of-things; laser; LED lighting; lithium-ion batteries; magnesium batteries; m-commerce; mRNA technology; nanoparticles; nanotubes; neural interfacing; nuclear fusion; plasma propulsion; quantum computing; RFID; robotics; satellite internet constellation; smart speakers/virtual assistants; smartphones; smartwatch; solar panels; spray-on fabric; supersonic flying; tablets; virtual teams; wireless sensors...

...need of an experienced VB6 developer who can update my source code and add new features to my application. Key Requirements: - Update existing VB6 application source code - Implement user authentication - Integrate data export functionality - Enhance existing reporting tools The primary goal of this project is to add new features to the application. Please note that I am not looking to fix any bugs or improve performance at this time. Your main focus will be on the successful implementation of the new features. Ideal Skills and Experience: - Extensive experience with VB6 - Proven track record of updating source code - Prior experience implementing user authentication - Capability to integrate data export functionality - Experience enhancing reporting tools in a...

LED design and BOM ready for upload to pcbway. Full project files in KiCAD Make sure to generate BOM from pcbway extension.

I'm seeking a modern and sleek logo for my company, which specializes in LED wall light systems. The logo should not be overly complex, but rather minimalistic with a contemporary feel. The logo should have the words "LED NEST" as that is the business name Key Elements: - The use of abstract shapes or lines. - An icon related to LED wall lights. Color Scheme: - A bright and vibrant palette. Ideal Skills: - Graphic Design - Brand Development - Adobe Illustrator Experience: - Proven track record of creating modern, minimalistic logos. - Experience with designing for the lighting industry is a plus.

I need a circuit board designed primarily for signal processing. This board will be handling mixed signals, specifically processing sensor signals. Key Requirements: - Design a circuit board capable of mixed-signal processing with a focus on sensor signals. - Ensure the board is optimized for signal processing tasks. - Provide schematics and design files. Ideal Skills and Experience: - Expertise in circuit board design. - Proficient in working with mixed-signal and sensor processing. - Strong background in signal processing.

I have a nearly complete Fusion 360 project that needs some final...role will be to help with: * Looking for beginners freelancer, who can take this micro project as their first project, who fit in my underrated pay. * Creating exact fittings for a PCB * Mapping an LED light indicator strip to match the PCB * Modifying the design to potentially add ergonomic features if necessary * Ensuring the project is ready for 3D printing The final design needs to be optimized for ease of assembly. Ideal Skills: * Beginner/Mid level experience in Fusion 360 * Experience with 3D design and printing * Understanding of PCB fitting and ergonomic design * Ability to enhance design for ease of assembly Please note, the precision of the PCB fitting is crucial - ...

We are looking to hire an experienced Golang Backend Developer or agency to help us complete the backend development for our HR ERP system. This is an exciting opportunity to collaborate with a team led by a senior developer and manager with 10+ years of experience in distributed systems. Our simplified architecture and frontend design are already in place, and we have a clear API-driven design approach with namespaces decided. We aim to build a robust, scalable, and high-performing backend solution for our ERP system. This role can either be a 3-month full-time engagement or a complete outsourcing of the backend development.

Project Details I'm in need of a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:

I am looking to create a digital airsoft target see attached documents. I will need all files and BOM in order to have whatever PCB we create manufactured and assembled.

Project Overview: We are seeking a comprehensive design and engineering plan for a high-end, two-story metal deck with a distinctive roof structure, seamlessly integrated into an existing wood-framed home. This project includes a custom metal planter box, floating seating area, fire feature, and Scandinavian-inspired garden shed. The design must incorporate electrical, drainage, lighting, plumbing, and irrigation systems, equally emphasizing aesthetic appeal and functionality. Key Qualifications: - Proficiency in CAD and similar design software - Experience with architectural metalwork & custom fixtures - Ability to produce detailed engineering drawings - Expert in 3D rendering for clear visual representation - Competence in creating documents for precise fabricat...

I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technology, and LED displays.

I'm seeking a logo for my wife's new venture, Spoke Psychotherapy. The name is a clever pun on bicycle spokes and the act of speaking in therapy. The business caters to active individuals, particularly cyclists, with a focus on nurse-led psychotherapy. Key Elements: - The logo should incorporate the tagline: "Building a stronger wheel of wellness" as subtext. - The desired font style is classic and elegant. - The color scheme should utilize soft and pastel colors. The ideal freelancer for this project is a professional graphic designer with a strong portfolio in creating minimalist and elegant designs.

...proximity. Upon detecting someone, it should instruct a Raspberry Pi 4 B to trigger a 1st servo motor (Towerpro MG995) to open and close the dustbin lid. Weight Detection: A Force sensitive Sensor will check if garbage is present and notify the Raspberry Pi for further operations. Image Capture and Processing: A webcam (Kreo Owl Full HD 1080P 60 FPS) will capture an image of the garbage. 3 Lilypad LED will glow to illuminate the garbage. The captured image will be analyzed by a machine learning model to classify the type of waste. Waste Segregation: Based on the classification, the Raspberry Pi will instruct a stepper motor (NEMA17 PR42HS40-1204AF) to rotate the upper section of the dustbin, positioning the garbage above the correct category's separation. An IR sensor will c...

I'm on the lookout for a seasoned embedded systems engineer to help me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set f...

I'm seeking a skilled who can quickly and accurately design a mixed-signal circuit using the Proteus/ISIS simulation software. This project revolves around the study of a photovoltaic-wind hybrid network connected to a High Voltage Direct Current (HVDC) bus. Key aspects of the project include: - Understanding and implementing the complexities of a hybrid renewable energy network. The ideal candidate for this project will have: - Proficient experience with the Proteus/ISIS simulation software. - Experience with designing circuits for renewable energy systems. Speed and accuracy are paramount for this project, and I am prepared to compensate appropriately for high-quality work.

I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01)...on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an STL file for a 3D printed bracket housing that will hold a 77 mm lens on the bi-LED projector. Ideal candidates for this project should have substantial experience with ESP32, TFT displays, and animation rendering. Familiarity with 3D printing and creating STL file...

...'eye' turning feature inside the headlight. - Creating a web-based control panel integrated via a WiFi hotspot for dynamic user interaction. - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on a bi-LED projector. Ideal skills and experience for this job: - Proficiency in using ESP32 microcontroller and GC9A01 TFT displays. - Strong background in frame-by-frame animation techniques. - Familiarity with LVGL, TFT_eSPI, TJpg_Decoder, and SPIFFS or LittleFS. - Experience with designing and implementing interactive web-based systems. - 3D printing and design skills for creating custom brackets. I'm open to suggestions for the specific animation modes the headlights should have, and how the web-based control panel could be best interacted w...

I am looking for a professional t...displays - Implementing a servo motor mechanism to control the 'eye' turning feature - Achieving seamless display synchronization - Advanced animation rendering - Designing a 3D-printed bracket housing to securely hold a 77 mm lens on the bi-LED projector In addition to technical precision, creative design is key to this project. Ideal skills and experience for this job include: - Proficiency in microcontroller programming - Experience with TFT display setup and animation rendering - 3D-printing skills for custom bracket design - Creative thinking to design expressive animations Please note that the specifics of the animations, the level of synchronization and the customizability of the animations will be discusse...

I am in need of an experienced electrical engineer specializing in circuit design. The project involves designing a circuit for an unspecified application, so versatility and creativity are key. Ideal candidates should have: - Extensive experience in circuit design - Ability to work on various applications, from consumer electronics to industrial machinery - Innovative thinking for creating efficient and effective designs

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01...on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an STL file for a 3D printed bracket housing that will hold a 77 mm lens on the bi-LED projector. Ideal candidates for this project should have substantial experience with ESP32, TFT displays, and animation rendering. Familiarity with 3D printing and creating STL file...

I'm in need of a basic precision, manually controlled, adjustable current regulation circuit that can handle up to 15A at 170VDC. The primary application for this circuit will be within power supply systems. Key Requirements: - The circuit should be able to adjust the current from 0 to 15A. - It should be designed for use in power supply systems. - The level of precision required for current regulation is basic. - The control for adjusting the current should be manual or digital. Ideal Skills: - Circuit design and development. - Experience with power supply systems. - Understanding of basic precision regulation.

Create a Stunning Walkthrough Video of an Amusement Park with Giant Ferris Wheel Job Description: We are looking for a talented video editor/animator to create a high-quality walkthrough video of an amusement park featuring a 40-meter-tall giant ferris wheel with dynamic LED animations. This video will be used to pitch the concept to potential investors, so creativity and attention to detail are a must. Skills Required: Expertise in 3D animation and video editing. Ability to create realistic and vibrant animations. Experience in showcasing large-scale environments or amusement park concepts. Strong creative vision to bring the park and its attractions to life. Project Notes: No on-site shoot is required. The video will be created using digital assets, animations, and stock footage...

I'm looking for an experienced engineer to develop a LED display that shows real-time air quality index (AQI). The display should also provide additional information such as temperature, humidity, time and date. The device will receive the air quality data through a Wi-Fi connection. Ideal Skills: - Embedded Systems Design - LED Display Programming - Wi-Fi Data Reception - Environmental Sensor Integration Key Requirements: - The display should be user-friendly and easy to read - The device should be able to connect to Wi-Fi to receive live data - The design should accommodate additional information apart from AQI Please provide examples of similar projects you have worked on in your proposal.

I'm in need of a seasoned FSM (Finite State Machine) Arbiter expert specializing in digital circuit design. Key Responsibilities: - Design and implement an FSM Arbiter for a digital circuit. You should have: - Extensive experience in digital circuit design and FSM Arbiter. - A deep understanding of the design and implementation of FSM Arbiter. Deadline: 1 days

My story is a testament to a life experience many people may have had the misfort...was all futile, a tragic waste. As a young man, I served in the British Army. This is where my story starts. Subsequently decorated for my contributions to Special Operations in Northern Ireland, where both Overt and Covert operations were conducted. I can never go back to that Island for reasons that will become apparent. This experience started me on a treadmill that I could never get off; it led to more terrorist hideouts. Ultimately, taking me all over the world, analysing, lecturing, and warning of the terrorist threat that we all face now and in the future, culminating in me eventually returning home after five years of forced exile. In my twilight years, I can only say, “They are still...

...Directors, Graded Employees, Contractors, and interns.” Text on screen: • Step-by-step onboarding guidance • Duration and topics per section • Tailored for all employees and interns [Scene 3: Why This Initiative?] (Motion graphics (or animation) of a new employee being guided by a mentor) Voiceover: “This initiative addresses the need for a structured induction process. Previously, lack of clarity led to confusion. The new e-booklet ensures consistency, boosts confidence, and fosters better engagement among new hires.” [Scene 4: Project Team and Leadership] (Graphic image of the project team with titles on screen) Voiceover: “This project was made possible through the dedicated efforts of our project leaders and team members. Their col...

I'm seeking a professional who can create animated frames of realistic vegetation with a summer beach theme for LED screens. Key elements to include: - Specific Vegetation: I want to see animated flowers, trees, and leaves incorporated into the frames. - Visual Style: The overall aesthetic should be realistic rather than cartoonish or abstract. - Summer Beach Vibe: The environment should reflect a summer beach scene. Ideal Skills and Experience: - Strong background in animation and visual effects. - Experience working with realistic style animation. - Ability to understand and execute a specific thematic request. - Previous work with creating content for LED screens would be a plus.

I have DXF and Python files ready to be processed on an electrical CAD. I'm looking for someone who can run the files and create the necessary 2D drawings. The specific elements that need to be included are: - Circuit diagrams - Wiring schematics - Panel layouts - A Parts list Ideal candidates for this project should have extensive experience with electrical CAD and can demonstrate a keen attention to detail. Please include examples of similar projects you have completed in your bid.

I'm in urgent need of a skilled mediator. I worked with Brett for seven months under a contract aimed at expanding his audience and r...achieving substantial milestones, including $33k from a webinar, Brett has refused to pay the agreed percentage. He also owes me $3k, which he initially claimed was stuck in Payoneer, but later admitted he would only pay when funds are available. My objective is to recover the owed money as swiftly as possible. The delays, lack of transparency, and refusal to provide proof of transactions have led to immense frustration and mental stress over the past two months, leaving me in financial distress. I have a contract and communication records that support my claims. I'm seeking a mediator who can facilitate this situation and help me secure...

I'm in need of a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The ESP32, SIM800L, and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1″ (2.54 mm) spacing through holes. 6 X 14 CM PCB Board - Power PCB 14 x 14 CM PCB Board ESP32 38Pin Development Board --> Hi Link HLK-PM01 5V/10W --> 2.54mm Pin Female Single Row Header Strip -->

...opening applications, typing into fields, clicking buttons, scrolling, and navigating web pages. It shall be able to execute that tasks not only on the browser but also other desktop applications. • Adapt to different starting points (e.g., desktop or specific application) using the provided image input. • Dynamically update the action plan if a step produces unexpected results (e.g., previous step led to unwanted state or dead-end). • In case that script hangs and can't find reliable next step, shall pause the exeuction, ask user for the input (e.g. go to correct page) and then resume execution. However it shouldn't be overused and treated as last resort. 3. Input Handling • Accept and interpret plain text instructions. • Analyze a startin...

Title: PCB Design with Gerber Files, Schematic, and BOM Description: I am looking for an experienced PCB designer to help me create a custom PCB design for my project. The design should include: Schematic Design: A clear and detailed schematic of the circuit. PCB Layout: Design the PCB layout based on the provided schematic. Gerber Files: Generation of Gerber files for manufacturing. BOM (Bill of Materials): Will be provided and open to any modifications for better performance,Provide a complete BOM with part numbers, specifications, and suppliers (e.g., Digikey, Mouser). Project Requirements: Board size: 70mmx70mm Layer count: 10 Layer Component preferences: Drill Hole Special requirements: TI Processors and components preferred Target applicat...

We are seeking a skilled freelance researcher to investigate allegations of corruption and misconduct by bureaucrats in the Tweed Shire Council. The findings will be used to support a community-led campaign advocating for accountability and transparency in local governance.

I'm in urgent need of a seasoned Siemens WinCC and TIA professional. I need help with migrating a Siemens HMI project that's likely been created with "V11 + SP2 +Upd5". The project has been previously attempted to be opened with WinCC 7.4, but this led to migration issues and unable to open WinCC Professional Projects. - Specific Assistance: Project migration to a newer version - Timeframe: This is a time-sensitive project Your expertise and experience with all versions of Siemens WinCC and TIA, particularly in project migration, will be critical. Please note that I've tried to open the project with WinCC 7.4 and WinCC Professional V11 SP2.

...emisiones”: Permitir que varios usuarios puedan reservar el mismo garaje en horarios diferentes (por ejemplo, un trabajador de día y un residente por la noche). Esto optimiza los recursos y reduce la necesidad de construir más aparcamientos. 2. Incentivar a propietarios eco-conscientes • Crear un programa de recompensas para propietarios que adopten prácticas sostenibles, como: • Instalar iluminación LED de bajo consumo en el garaje. • Proveer estaciones de carga para vehículos eléctricos. • Ofrecer descuentos a arrendatarios con coches eléctricos o bicicletas. 3. Integración con transporte público • Diseñar un sistema de recomendación que combine el uso de garajes...

I'm in need of an expert to design a circuit for an induction heater. This heater will be specifically used for heating non-ferrous metals like brass. Key Requirements: - The induction heater circuit should be designed to handle a power output of up to 1kW. - The design should be robust enough to endure the rigors of metal heating and forging. - Experience with induction heater designs and metal forging applications would be highly advantageous. Ideal Skills: - Circuit design - Knowledge of induction heating technology - Experience in metal heating and forging applications - Understanding of non-ferrous metal properties and heating requirements.

I need 10 unique modern background pictures suitable for Microsoft Teams. These should be tailored for my company, incorporating our logo in both the standard and more challenging ways (like integrating into the background furnitu...background furniture). A mix of office and drilling rig settings would be ideal. Key requirements: - Use of our company brand colors - Integration of our logo in a clever way - A mix of office and drilling rig backgrounds I can provide the company logo. with logo integrated into the furnitures, its nice if it has a led around it, or similar. Ideal candidates will have a strong background in graphic design with experience creating corporate visuals. A good understanding of modern design aesthetics and ability to creatively integrate logos ...

I'm i...version of the power supply - Designing a board-level version for product integration - Ensuring the AC output is suitable for plasma generation The initial laboratory version will need to meet the exact specifications of the LF-500. Safety features are crucial, with both overload and short-circuit protection required. Ideal candidates for this project should have: - Extensive experience in high voltage power supply design - Proficiency in creating laboratory-grade equipment - Capability to design board-level versions for mass production - Strong understanding of safety features in high voltage equipment - Familiarity with plasma generation equipment Please note, the frequency range and duty cycle have not been specified and would be determined based ...

I'm in need of an experienced electronics engineer with a strong background in circuit design. The primary goal of this project is to design a circuit for a piece of industrial equipment focused on automation control. Ideal Skills: - Circuit Design - Industrial Equipment Knowledge - Automation Control Expertise Please note, the main focus of this project is circuit design. Experience with prototype development would be beneficial, but it's not the primary focus.

I'm seeking an electrical engineer with expertise in load calculations. The project involves working with various system components, including generators, transformers, motors, and cables. Ideal skills and experience include: - Proficiency in load calculations - Experience with short circuit calculations - Knowledge of circuit design, power systems, and telecommunications - Familiarity with generators and other system components - Expertise in using relevant engineering software - Creating and approving plot plans - Possesses knowledge about solar systems, if applicable - Billingual (Spanish and English) , if applicable