Esp32 devkitc arduinoemplois

Bonjour nous avons projet autour de arduino pouvez vous nous contacter Merci

Bonjour je desire realiser un device a base de arduino et soloneid pulpul qui communique avec un au device

Développement d’une main sous actionnée pour un robot KUKA. -Conception CAO sous SOLIDWORKS 2013 et réalisation du dossier technique et du dossier de fabrication. -Réalisation d'un programme sous une interface orienté objet (ARDUINO) d'un programme de commande.

Le projet consiste concevoir et développer un "objet connecté" et son API servant principalement à un piloter un potentiomètre numérique au travers d'un websocket . La plateforme (arduino ou pi zéro) doit permettre les fonctions suivantes : - Serveur websocket REST - Lire et écrire la valeur d'un potentiomètre numérique - Mesure instantanée d'un courant en Ampere - Ouvrir ou fermer un interrupteur - Allumer une led lorsqu’un canal websocket est établi. L'API doit permettre : - Fixer une valeur de consigne en Ampere ce qui correspond à un réglage en ohm du potentiomètre - Lire la valeur de consigne "en cours" du potentiom&egrav...

J'ai besoin de dessiner un PCB pour un arduino mini et avec un module SN75176BP.

je veut connecter mon arduino au cloud via un module wifi qui permet l'envoie du valeur de glucose a partir d'un capteur de glucose et l'afficher dans une application mobile connecté au même cloud

J'ai fabriqué un capteur de distance avec du arduino. J'obtiens des données brutes variant entre A et B. Je souhaiterais un patch max. -qui detecte le port -a qui je peux dire A est le maximum, B le minimum -qui permette de dessiner une courbe pour faire varier les valeurs entre A et B de 0 a 127 -le signal MIDI de 0 a 127 sera ensuite récupéré dans Ableton Live

Le projet consiste à réaliser des services intelligents sous la plateforme open source Arduino. L’invocation de ces services est basée sur la collecte des informations environnementales. Le travail consiste à Choisir et effectuer l'interfaçage de capteurs de (température, luminosité, gaz, Intrusion, fumée…). Aussi, Assurer la communication entre le Smartphone et la carte de contrôle(Arduino Uno). La communication est peut être assurée par une liaison sans fil (Bluetooth, Wifi …) dont le but s'agit de contrôler la maison à distance c'est-à-dire activer des services à distances depuis un dispositif mobile . Comme il est possible d&rsq...

un programme sur arduino pour piloter un appareil de mesure à partir d'un smartphone ( bluetooth ou wifi )

- shema électrique - conseil et accompagnement sur la partie programmation

Je cherche à interfacer de manière totale des buzzers crées avec des Arduino avec le logiciel www.quizxpress.com. Je veux les même possibilités qu'avec les buzzers Maxidomes. Cela requiert une analyse de leur code et des probables modifications de dll.

Translate my resume from french to english, two A4 pages, 750 words Exemple : programmation • framework CodeIgniter • CMS : WordPress, PrestaShop • microcontrôleurs : PIC18 MCUs, Arduino réseau • planification, installation réseau (HP, Mikrotik, Watchguard, Cisco, pfSense) • sécurité réseau et poste de travail • intégration de système de vidéosurveillance (GKB) Informatique Orif, Aigle — 2013 développement web, stagiaire • développement d'une application web en PHP, HTML, CSS, SQL et concepts POO et MVC avec CodeIgniter, voir document annexe 'gestion des repas' • environnement Eclipse avec Git et plateforme Windows Azure &bull...

...Hardware Setup: Components: Moisture sensor Load cell (with HX711) for weight measurement Color sensor or camera for visual quality analysis Microcontroller (Raspberry Pi or Arduino) Additional components: breadboard, jumper wires, power supply, etc. Responsibilities: Design and set up the hardware system. Connect sensors to the microcontroller and test individual components. Ensure the components work properly and troubleshoot wiring or connection issues. Assemble everything in a functional system. 2. Software Development & Integration: Responsibilities: Install and set up the necessary libraries for Raspberry Pi or Arduino. Libraries like , hx711py, and Adafruit_TCS34725 for the respective sensors. Develop Python scripts for each sensor (moisture sensor, load cell, a...

Sensor data from Arduino to SQL database locally.

This project involves creating an Android application that interfaces with an Arduino-controlled setup containing 4 LEDs and a SIM800L module. The application allows a user to control the LEDs remotely, as well as receive data from the LEDs' states. Key Requirements: - The user has 4 buttons in the app to turn the respective LEDs on and off. - The app reflects the LEDs' states in real-time: when an LED is turned on, the corresponding button changes colour to green, and changes to red when turned off. - The app includes an OTP-based authentication system for secure access. - The app is designed with a simple and clean UI. - The app can be configured to work with multiple devices. - There is no requirement for a server or database, all communication is handled via the SIM...

I need a simple and minimal iOS app to monitor my PCB running an ESP32 C3 controller. The task is straightforward: the PCB turns on an LED and starts a countdown. Once the countdown is complete, the LED turns off. Key Requirements: - The app should communicate with the ESP32 C3 over Wi-Fi. - The interface needs to be simple and minimal, in line with Apple's design philosophy. - The app should be developed exclusively for the iOS platform. Ideal Skills and Experience: - Proficient in iOS app development, with a portfolio of simple and minimal apps. - Familiarity with Wi-Fi communication protocols for IoT devices. - Prior experience working with ESP32 C3 controllers will be a plus.

I'm looking for an expert in Arduino programming and embedded systems to update my existing Arduino code. The code needs to function based on a DS3231 RTC in two different scenarios: 1. Day/Night Temperature Regulation: The Arduino will determine whether it's day or night using data from the DS3231. During the day, it will maintain current temperature values. At night, it will switch to using predefined lower values. 2. LCD Display Management: The code should also handle an LCD display that shows the current time, the day/night scenario, temperature, and fan speed details. Skills and Experience Required: - Proficient in Arduino programming - Experience with DS3231 RTC - Familiarity with LCD screens - Knowledge of DHT11/DHT22 temperature sensors - Ab...

I'm looking for a skilled professional who can help me collect data from my Arduino sensors and transfer it to a MySQL database. The data includes temperature, pressure and altitude readings. Key Project Details: - Data Collection: The sensors will be collecting data every second. So, efficiency is key. - Connection: The connection to the database will be through both Wi-Fi and wired Ethernet. Experience with both types of connections is necessary. Ideal Skills: - Proficient in Arduino programming - Strong knowledge of MySQL - Experience with sensor data collection - Familiar with Wi-Fi and wired Ethernet connections Please provide examples of similar projects you've completed in your proposal. Thank you.

I'm seeking a skilled PCB designer with experience in Arduino Nano applications. The PCB's primary function will be controlling 1 to 2 servo motors. Uses four potentiometers, an ACS 712 5amp current sensor, a button, a buzzer, a voltage step down module looking for $100 or less bid. Key Requirements: - Design a PCB that interfaces with an Arduino Nano. - Controls 1-2 servo motors. - Primarily focused on motor control. Ideal Skills: - Extensive knowledge of PCB design. - Proficient in Arduino Nano programming. - Prior experience in designing PCBs for motor control.

Veuillez vous inscrire ou vous connecter pour voir les détails.

I'm looking for an experienced engineer to design a 27Mhz transmi...work effectively in an urban environment and achieve long-range transmissions of up to 5-10km at a speed of 100bps. Key specifications: - The sleep current must not exceed 100uA to ensure power efficiency. - The data will be transmitted in binary format and needs to be sent & received through an Arduino microcontroller. - transmitter Power should be less than 1 watt. Ideal skills and experience for the job include: - Proficiency in radio frequency engineering. - Extensive experience with Arduino and microcontroller programming. - Knowledge of binary data encoding and transmission. - Ability to design systems for urban environments with potential interference. Please submit your proposal if you ca...

I need assistance with troubleshooting an Arduino program that is not sending output to the serial monitor as expected. The program controls a mega board along with a PWM board to drive 9 servos, and recent modifications did not yield the outputs anticipated through debugging lines in Serial Monitor. Requirements: - Expertise in Arduino programming and debugging. - Ability to analyze code behavior for serial communication issues. - Experience in resolving hardware compatibility conflicts with Arduino boards and components. - Effective diagnosing of communication between PWM handling library, Servo Motor control, and Mega Board. Deliverables: - A fully functioning debugged program with visible outputs via the Serial Monitor. - Documentation of findings and fixes appli...

I want to create a remote start system for my BMW E60. The system will use an esp32 c3 to communicate with my phone, and a arduino mega to handle the sensors,and everything else ( esp is only for comunication ). Once close, it should start the car. As a backup, it will use an R503 fingerprint sensor for authentication. The app is already made by me in thunkable Key components of the project: - mcp2515 to detect engine RPM and door status via bmw K-kan bus. - Arduino to check shifter position using a Hall sensor, engine RPM and handbrake signal to permit remote start. Communication: - The primary communication method will be Bluetooth Low Energy (BLE) to interact with my phone. I need someone who is: - Very active on freelancer or platforms like WhatsApp, Facebook, ...

I'm looking for a skilled programmer to help me with an Arduino project. The main goal is to control actuators via Arduino. This involves: - Motor Control: The Arduino will primarily be used to control motors. - Actuator Management: Specifically, I need these motors to control actuators, enabling linear motion. The ideal freelancer for this job should have extensive experience with Arduino programming and motor control. Experience with other types of Arduino projects would be a plus. I am looking for someone who can deliver high-quality work in a timely manner.

...skilled developer to create an Arduino-powered network voltage monitor for specific battery-operated devices. This project involves designing a device that can monitor dual DC battery inputs, typically in the range of 30-60v DC. The device should also be powered by Power Over Ethernet (POE). Key Requirements: - The monitor must have web browser-based access for live data monitoring. Compatible with iOS and Mac. - It should be capable of dual voltage monitoring (with a voltage range of 30-60v DC) and potentially dual current monitoring for two DC battery inputs (with a maximum draw of 10 amps). - Experience with Arduino and network-based projects is a must. - The web browser-based access must also include functionality to change the IP address/subnet of the Arduino...

I'm looking for a cross-platform (iOS & Android) app that can control LED lights via Wi-Fi. The app should allow users to: - Change colors using a simple color picker. - Utilize pre-set lighting patterns. - Create their own using customizable patterns. Additionally, the app should have a scheduling feature to turn the lights on and off at specific times. Ideal candidates for this proje...own using customizable patterns. Additionally, the app should have a scheduling feature to turn the lights on and off at specific times. Ideal candidates for this project should have prior experience in developing cross-platform apps, particularly for controlling smart home devices. Strong skills in UI/UX design will also be beneficial, as the app needs to be user-friendly. Basic skills C++...

I'm in need of a hardware support expert for my RFID Card Reader project, which utilizes Arduino and GSM Modules. The data logs from the project need to be saved on Firestore. Key Responsibilities: - Setting up the RFID Card Reader - Integrating the Arduino and GSM Modules - Ensuring seamless logging of data to Firestore - Troubleshooting any hardware-related issues Ideal Skills: - Extensive experience with Arduino and GSM modules - Prior work with RFID Card Readers - Proficient in setting up and using Firestore - Strong problem-solving skills Please note, I will provide the RFID Card Reader, Arduino and GSM Module. However, the ideal candidate should have access to additional hardware for troubleshooting and testing purposes. Only apply if you have con...

Please do not apply if you understand the following. [ Purpose ] : My Brushless ESC integrated to Flight Controller(FC) is lower current...Flight Controller(FC) is lower current than 20A. I want to use independent another 40A ESC without any modification of Brushless ESC integrated to Flight Controller. [ Connection Diagram ] Brushless 20A ESC integrated to FC -> out signal(three phase power) of ESC -> Module (need to develop) -> pwm signal(+5v) -> ESC 40A -> output signal -> Brushless motor [ Todo list ] : 1. Schematic(Arduino and so on) and Firmware, Technical Document for Converting Input Signal to Output Signal - Input Signal : Output signal(three phase power) of one Drone Brushless ESC - Output Signal : Control Signal(PWM/+5v) to control...

My PCB for industrial machinery has been failing and I need a professional to review my schematic and board layout files. The board is controlled by an ESP32 and displays via a Nextion on UART. Issues to Address: - Interference between components - Unexpected resets or failures - Communication errors with peripherals Measures Taken: - Shielding - Filtering - Grounding techniques - Decoupling - Suggestions for field wiring to board -component values -adding any protection components or change values I look forward to your expertise in identifying any potential issues that could cause my board to fail in this industrial setting.

I need assistance troubleshooting and correcting some Arduino code. The code is supposed to turn on a small pump and keep it running until a set conductivity threshold (780) is reached in the water. This is part of a larger science fair project focused on Diabetes. Ideal Skills: - Proficient in Arduino programming - Experienced in troubleshooting and correcting code - Knowledgeable about conductivity sensors The task should be relatively quick and straightforward for someone with the right skills and experience. Please reach out if you can help. Thank you!

...codebase developed in the Arduino environment. The project involves programming an ESP32 to work with a GPS correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino ...

...dual GC9A01 displays for an advanced animated eyes project using the ESP32-S3 microcontroller. The project involves creating smooth and seamless frame-by-frame animations for a pair of 240x240 pixel displays. The animations will be based on high-quality JPG frames, leveraging libraries such as LVGL, CircuitPython, and TJpg_Decoder. The key objectives include: Synchronization: Both displays need to be perfectly synced for consistent animations across the eyes. Web-based Control: Develop a WiFi-enabled control panel that allows users to connect via a hotspot and select animation modes through a web interface. Animation Modes: Support multiple animation modes, including static and dynamic frames, while optimizing for the ESP32-S3’s storage and performance capabilities...

Hi, I’m looking for a freelancer to help me design two PCB variants for a stair-lighting controller using a 38-pin ESP32 Dev Module (USB-C). This system will power and control WS2812 LED strips and incorporate multiple sensors for an intelligent lighting setup. Below is an overview of what I need, followed by detailed requirements. At the end, I’ve included links and attachments referencing a similar board and my own sketches. >>> Overview of the Project 1. Goal: Create two PCB variants (Version A and Version B) of a stair-lighting controller for WS2812 LEDs: - Variant A: 2 LED outputs, - Variant B: 16 LED outputs. 2. Board: Uses an ESP32 Dev Module (38-pin, USB-C) mounted on female headers (no extra programming buttons needed). 3. Sensors: 2&tim...

Quiero hacer con un sistemas arduino un sistemas q tenga, boton, altavoz, alimentación a pila, lugar para ubicar un lector de memoria SD, lo intenté realizar en tinkercad pero no soy experta y se me complica, quiero primero verlo en un simulador, luego saber bien q comprar y un tutorial de como armarlo para hacerlo yo

I'm looking for an experienced Arduino programmer and circuit designer to build a simple circuit that can send readings from two fuel optical sensors over the longest range radio available. Key Requirements: - located in Great Britain - Knowledge in Arduino programming and circuit design. - Experience with fuel optical sensors preferred. - Proficient in implementing long-range radio communication, ideally LoRa. - Ability to design a battery-powered circuit. The circuit should take readings from the two sensors, which output 5V when in air and a neutral 3 wire, and send these readings over the radio. The circuit will be powered by a battery.

I'm experiencing sporadic connectivity issues with my home automation project. The setup involves an Arduino Uno and an ESP8266 WiFi module. Key Issues: - The Arduino Uno seems to go offline without a clear reason. - Unsure how to bring it back online. Ideal Skills and Experience: - Proficient in working with Arduino boards, particularly the Arduino Uno. - Hands-on experience with the ESP8266 WiFi module. - Strong troubleshooting skills for connectivity issues, especially with COM port. - Background in home automation projects would be a plus.

I'm looking for an experienced programmer well-versed in Python and GPIO interfacing with ESP32. I need a script that will help automate device scheduling based on a daily timetable. Key Requirements: - The project involves 4 GPIOs, all of which should function independently. - Each of the four outputs should have different, selectable schedules. - The device should be able to turn on and off according to this daily timetable. Ideal Skills: - Proficiency in Python programming. - Extensive experience working with ESP32 and GPIOs. - Previous experience in automating device scheduling. Developer is developing the front end for the aap and firmware patch for this schedule. I look forward to your proposals.

I'm in need of a seasoned expert to assist with the hardware design of an ESP32-S3 project, specifically focusing on component selection. The primary area of concern is the selection of appropriate communication modules. Ideal Skills and Experience: - Extensive knowledge and experience with ESP32-S3 hardware and component selection - Proficiency in identifying suitable communication modules for various applications - Previous experience with PCB design and hardware troubleshooting - Strong understanding of power management and relevant components.

I'm looking for an experienced developer to write software for an ESP32 module. The primary function of the ESP32 will be to collect sensor data. The ESP32 will need to communicate this data using both WiFi and Bluetooth, with a specific focus on implementing Bluetooth Low Energy (BLE). Ideal skills and experience for the job: - Proficient in programming ESP32 modules - Experience with sensor data collection - Strong understanding of WiFi and Bluetooth communication protocols - Specific experience with Bluetooth Low Energy (BLE) - Ability to write efficient, reliable software for real-time data collection and transmission.

...or 3" BI-LED Projector, a lot of options/pictures will show up for reference. 1-The First STL File: THE SAME EXACT Lens Locking Bracket. (in the attached pictures) 2-The Second STL File: The same file you created, 1 minor modification, the bracket has 1 big gap in the bottom. i need to make one matching gap on the opposite side. The Goal here. i Invented a Servo Mechanism controlled by a mini esp32 c3, the Servo arm is connected to a round GC9A01 Display controlled by a switch. when switch is turn on, the servo arm goes down 90 degrees to line up the display in the center of the lens. when switch is turned off, the servo arm goes back to its original location. For Testing Purposes, i have 1 BI-LED. i cut 1 arm (top left) and carved a small portion of the black mounting le...

Wire Game arduino code. .

...a compact, double-layer PCB designed for a digital circuit. The project involves creating a Gerber file that is ready for printing, accommodating the given circuit diagram. The PCB should be small and compact, suitable for accommodating a digital circuit. The 2 ESP32, SIM800L, MAX 485 and ADS1115 will be mounted on a 2.54 mm pin female single-row header strip. All connectors will use 5 mm PCB terminals with standard 0.1” (2.54 mm) spacing through holes. Components Ref: ESP32 38Pin Development Board: Hi Link HLK-PM01 5V/10W: 2.54mm Pin Female Single Row Header Strip:

...an experienced developer specializing in Arduino and Android applications, and I would be delighted to assist you in creating your moisture sensor app. Project Overview The app will: Hardware: The ESP8266 module will handle Wi-Fi connectivity, communicating with the app. Sensors can be simulated or real, depending on your requirements. App Features: A clean interface inspired by your provided pictures. Real-time updates for sensor values. Customizable moisture thresholds for user-defined control. Development Process: Initial setup and design of the user interface. Integration of the ESP8266 for seamless communication. Testing with both simulated and real sensors to ensure reliability. Why Choose Me? Extensive experience working with Arduino and ESP8266 modules. Pro...

Video tutorial y manual en pdf de como realizar las conexiones electricas, software /codigo y todo lo necesario para armar una extrusora de filameto con botellas. El equipo será armado con un Arduino uno.

I'm looking for a professional to write Arduino code for controlling a single digit LED display with a Radio Frequency (RF) remote. The display will be showing numeric values. Key Requirements: - Develop Arduino code to control the LED display via an RF remote. - Ensure the code allows for seamless display of numeric values. I don't have an existing RF receiver module, so I would appreciate recommendations for suitable hardware. Ideal candidates for this project should have extensive experience in Arduino programming, RF technology, and LED displays.

Техническое задание: Интеграция функций из пользовательской прошивки в Grbl Описание проекта Необходимо модифицировать исходный код Grbl для Arduino Uno, чтобы он выполнял функции из моей пользовательской прошивки, сохранив основные возможности Grbl для управления шаговыми двигателями. Функциональные требования 1. Обработка пина A2: - Чтение состояния кнопки, подключённой к пину A2. - Если кнопка нажата (LOW), в COM-порт должна отправляться строка `"ON"`. - Добавить защиту от дребезга (debounce), интервал — 20 мс. 2. Работа с модулем HX711 (пины A0 и A1): - Чтение данных с HX711: - При получении команды `"1"` через COM-порт, отправлять в порт измеренные данные веса с использованием функции `scale.get_units()` (до одного де...

...me with a high-accuracy speech recognition project using the ESP32-S3 board. Key Responsibilities: - Design and implement an embedded system with the ESP32-S3 board. - Optimize and integrate the ESP-Skainet speech recognition library for our needs. - Ensure the system achieves high levels of speech recognition accuracy. Ideal Skills and Experience: - Proficient with the ESP32-S3 board. - Extensive experience in embedded systems design. - Strong skills in working with the ESP-Skainet speech recognition library. The objective of the project is to create a system where a phone connects to an ESP32-S3 board via Bluetooth. The phone will send a user-defined keyword to the ESP32-S3, which will then be set for recognition. The ESP32-S3 board will us...

I need a circuit board designed and built that uses an ESP32 to drive a large number of LEDs (SMD, 300-500). The LEDs should be arranged to represent a detailed map that will be provided. Key Requirements: - Design and construct a visually appealing circuit board (as it may be directly exposed to end user) - Use an ESP32 to control a large number of LEDs (you will have to explain how you plan on doing this) - Arrange the LEDs according to a detailed city map which I will provide on the circuit board. Ideal Skills and Experience: - Electronics and circuit board design - Proficiency with ESP32 - Experience with LED projects - Design skills for creating an aesthetically pleasing product

I'm working on a unique project - animating car headlights to resemble eyes, like the devil demon eyes, using an ESP32. I have already written 75% of the code and set up two TFT displays (GC9A01) to serve as the 'eyes', but I need assistance with the following: - Library Integration: I need help finding the right libraries to complete my project. - Display Synchronization: The two screens need to be perfectly synced, and I could use some guidance on how to achieve this. i invented a servo with a code to turn the eye inside the headlight on and off, thats done and ready. - Animation Rendering: So far, I've only been able to implement basic animations like blinking and rolling. I would like advice on how to create more complex sequences. In addition, I need an ST...