tool for frame grabbing/showing

basics - portable / no installation needed, running from folder on windows 7 or 10 pc - parameter controlled by an text file (ini), load it at program start - end program with F4 - write each start button pressed/event a new line to an (endless) logfile (txt) in same folder if started: 1. show a given (settings) png file (max window/in front of all other windows) with a start button in front of it 2. the start button is a separate graphic file (settings) at a definable X/Y position and z size (settings) 3. if user press this button a downcount timer starts (timer1 = settings in sec; as text color, text size, X/Y position), showing file 2 4. if counter reached 1 just enable CTS signal on given COM port; if counter reached 0 disable signal again 5. scan hotfolder (settings) for new photo and show it on the screen for timer2 seconds (from the moment 4. wait 5 sec for a new photo - of not found show an error_png/jpg instead of) - after that go back to start picture settings: - hotfolder for photos - com port - timer1 downcounter - timer2 photo show - file for start png/jpg1 - file for start png/jpg2 - file for start button png/jpg2 - x_start_button_position - y_start_button_position - z_start_button_size - x_counter_position - y_counter_position - z_color_counter - error png/jpg file if you take the challence, i expect an beta/test release, to check your work = milestone 1. if ready + tested + i got the sources = milestone 2. If working stable - and perhaps little changings from user were solved (can take 2 - 3 weeks) = milestone 3 = finished. later i meight have other tasks.. see you! Tom