Solidworks apprentice työt

We are Greenhouse service provider, and we need to represent our products in 3D, Also need contactor panel drawings Must experienced with SolidWorks. This job is part-time (As on needed basis) If you will be a good fit we have long term work for you. Please write 'Fan' on the top of your bid to avoid bot bidding Thanks

take existing PDf, draw the largest shaft and the setup. analyse for transport. send results. drawings just for transport C1, C2, P1 GA and P2 Transport. On front cover show other page numbers in the title - use their numbers in the table.

Mechanical Engineering Project: Hydraulics and Motor Design Scope: Design Software: SolidWorks, AutoCAD Mechanical system/product: Hydraulics and Motor Design Skills and experience required: - Proficient in SolidWorks and have a background in AutoCAD - Strong knowledge of hydraulics and motor design - Experience in mechanical engineering - Attention to detail - Problem-solving skills - Ability to work independently and collaboratively - Effective communication skills The project requires a mechanical engineer who is profound in this field. The ideal candidate should have a strong knowledge of hydraulics and motor design, and be proficient in using SolidWorks as well as AutoCAD. The candidate should also have experience in mechanical engineering and be a...

Cad drawings for rolling shutters in a commercial building I am looking for a freelancer who can create CAD drawings for both manual and motorized rolling shutters in a commercial building. Design preferences: - I have a general idea of what I want the shutters to look like, but I am open to suggestions from the freelancer. - I will provide the freelancer with specific dimensions for the...I am open to suggestions from the freelancer. - I will provide the freelancer with specific dimensions for the shutters. Ideal skills and experience: - Experience in creating CAD drawings for rolling shutters. - Knowledge of different shutter materials and their properties. - Ability to work with design preferences and provide suggestions. - Familiarity with CAD software such as AutoCAD or Solid...

take existing drawings, develop part files, set up an assembly, analyse for strength. either modify for more strength of the existing components. no new drawings unless we need to modify existing components after analysis.

take existing drawings, develop a prt file model, take previous job and use the layout for this project, analyse for lifting, prepare drawings

take original drawings and make a part. review previous job and design similar bolt together stands. analyse for strength and do drawings

take original drawings, draw a base part, take previous project details and draw a similar set of walkways and platforms. design in steel, analyse for strength, do drawings

take original drawings and draw a hole. then take previous job and resize to suit this location. check strength and then do drawings.

take sketch note diagram, take existing drawings make up a connection point on roller bearings for supporting 2 people on lanyards, i will provide design loads and sketch notes. design in aluminium. drawings.

...storing parcels of various sizes. The locker should have multiple compartments with varying sizes to accommodate parcels of different sizes. We would also like the locker to have a locking mechanism that can be controlled remotely. Required Skills: - Proficient in sheet metal design - Experience with CAD in SolidWorks - Familiarity with manufacturing processes for sheet metal - Understanding of locking mechanisms Deliverables: - 3D CAD model of the sheet metal parcel locker (Solidworks source files) - 2D engineering drawings with detailed dimensions and tolerances - Bill of materials with part numbers and quantities Additional Information: - The locker should be designed for outdoor use and should be weather-resistant. - We would prefer the locker to have a modern and s...

...6" piping run with a electric axial fan of 2,2 kW, as shown in attached layout. Our budget for this project is under $400 and 1 week delivery time. The ideal candidate should have experience with industrial equipment retrofit, CFD Simulation and air conductions (HVAC) . Some specific skills and experience that would be helpful for this project include: - Performing CFD Simulations (ANSYS, SolidWorks SIM, Inventor etc) - Understanding of air piping design and HVAC The main goal is to have a plotting of (velocity of air in extration vs cabinet door inlet area). This is needed for selecting a new access doors. The access front of the unit now is not proper for operation. The main deliverables must be: - Simulation of air velocity in the whole system, with some scena...

Rekisteröidy tai kirjaudu sisään nähdäksesi tiedot.

solidworks expert needed for industrial design project

There is simple instructions at the top that need to be followed. Below are some of the drawings.

Need help with producing a free body diagram and calculation of it as well as using Solidworks and finite element analysis see the pdf for more information

Hi, we are looking for someone who is able to make the parts in picutre attached (7 parts in total) in 3D CAD model. Unfortunately we only have the pictures without the exact dimensions. But as you can see on measurments on picture, you can usually easily estimate or measure on paper ...attached (7 parts in total) in 3D CAD model. Unfortunately we only have the pictures without the exact dimensions. But as you can see on measurments on picture, you can usually easily estimate or measure on paper the rest of dimension. In fact we would only need the outside shape with wall thickness of around 3mm of it and you have to provide the 3D files in Solidworks that we can work further. Are you able to do such a job? What SolidWorks version do you use? If yes, what would be price? Than...

I am looking for an experienced SolidWorks Simulation expert to work on a project that involves simulating a tank filled with water. The dimensions of the tank will be provided in project details. The primary goal of the simulation is to identify stress points in the tank. I require a static analysis to be performed on the tank. I will provide the SolidWorks part model which consists of a stainless steel shell with a tubular frame support. I want the simulation details added to the part file. Ideal skills and experience for the job include: - Strong knowledge of SolidWorks Simulation - Experience with static analysis - Ability to interpret stress analysis results - Experience with tanks and fluid dynamics - Good communication skills to discuss project details and ...

I am looking for a skilled designer who can create a 3D model file for a USB C...designer who can create a 3D model file for a USB C charger. The desired size for the charger is small, and I have a reference image that I would like the design to be based on. I am open to some creative input from the designer, but the reference image should be the main inspiration. Ideal skills and experience: - Experience in 3D modeling and design - Proficient in using software such as AutoCAD, SolidWorks, or Blender - Knowledge of various file formats such as STL, OBJ, and FBX - Attention to detail and ability to create accurate and functional designs Deliverables: - 3D model file of the USB C charger in the preferred file format - Ability to make revisions as needed to ensure a satisfactory fina...

We are Greenhouse service provider, and we need to represent our products in 3D Must experienced with SolidWorks. This job is part-time (As on needed basis) If you will be a good fit we have long term work for you. Please write 'Fan' on the top of your bid to avoid bot bidding Thanks

I'm working on a biomaterials Case Study of a fractured clavicle and I need help with a couple of things including what fixation method would be used for the fracture and, very importantly produce a free detailed body diagram (FBD) of the chosen fracture fixation method and Justify the decisions of each so you kneed to have knowledge in materials and stress, forces, constraints ect. and produce solidworks drawing od the fixation method Alos Suggest improvements that could be made to the fixation method. You may wish to consider (but are not limited to) the design, materials, orientation of fixation etc. so you need to have a knowledge in biomaterials and Orthopaedic Devices, stress, CAD/CAM and biology. see the PDF for details

I am looking for a Solidworks macro that: 1- With an open and saved assembly, create a new drawing document template and name the sheet submittal. 2- Add specified dimensions to the drawing. 3- Create a view for each unsuppressed sheet metal component of the assembly outside the sheet boundary. 4- Change the view to flat pattern configuration or create one if it doesn't already exist. 5- Ensure that there is no overlapping geometry between views. 6- Change the layer for each flat pattern to match the material thickness. 7- Create a save folder within the parent folder named “PDF” and “DWG”. 8- Save as .SLDDRW(in parent folder), .PDF(pdf folder but only the submittal sheet), and .DWG(dwg folder) file formats. A second Solidworks macro th...

take existing structure drawings and draw a base part. design a series of platforms and handrails to sit on top. design in aluminium , design for live load 5 kpa x 1.5. analyse for strength , take drawings

I a...am looking for a skilled 3D designer who can create a detailed and accurate 3D model of a car bumper cover from a scanned image. The picture shows the area we need to design a cover for. The cover needs to fit over the original bumper and the model will be used to make an injection moulding tool by our supplier. I can provide the scan data file. The file format needs to be opened in FreeCAD / Solidworks. The design requires a high level of detail with intricate features that match the scanned image. Experience designing products that are suited to injection moulding would be an advantage. The ideal candidate must have extensive experience with 3D design and a keen eye for detail. The project timeline is flexible, and I am open to negotiation. Thank you for your interest in thi...

...candidate should have experience in workplace furniture and a strong portfolio in modern design. Requirements: - Expertise in cabinet design - Expertise in new sustainable materials - Expertise in metal work - Strong sense of modern design aesthetic and current office furniture trends - Ability to work with specific materials and dimensions provided by the client - Proficiency in CAD software ie. Solidworks - Excellent communication skills and ability to work collaboratively with the manufacturing team If you have a passion for designing modern, modular office/workspace furniture and can bring innovative ideas to the table, please apply for this exciting opportunity. Example design files attached that we need you to be able to create. Please write HEY WORKAGILE at the top ...

I am in urgent need of a SolidWorks expert to complete a simulation task within the next 24 hours. The level of complexity is intermediate. The ideal candidate for this project should have experience in SolidWorks simulation and a deep understanding of the software. The project requires attention to detail, accuracy, and the ability to deliver under tight deadlines. The following skills and experience are required: Skills: - Proficient in SolidWorks simulation - Strong analytical skills - Attention to detail - Ability to work under pressure Experience: - Experience in SolidWorks simulation - Knowledge of simulation best practices - Proven track record of delivering high-quality work under tight deadlines If you have the skills and experience required for this...

take existing drawings, photos and sketches. develop a base model and then design a series of walkways, ladders etc in aluminum based on previous concepts from an older job

take existing structure drawings and draw in a model for the assembly. then draw parts and assembly files like the previous job example. analyse for the same strength in jib arms and on platform loads (remeber x1.5). design this one in steel. analyse and then do drawings

take previous job as an example, design similar platform - but in aluminium with aluminium treadplate top. Need to draw from original drawings to get the structure first . Then design for 5 x 1.5 kPa. Do drawings. Note support tabs will be different than previous.

I am looking for a freelancer who can assist me with CAD and Micro Fluidic Simulation. The purpose of this project is for research and development. The desired outcome is optimization of design and identification of potential issues. I require 4-7 iterations of the simulation. Ideal skills and experience for this job include: - Proficiency in CAD software such as SolidWorks or AutoCAD - Experience in Micro Fluidic Simulation using software such as ANSYS or COMSOL - Knowledge of fluid mechanics and microfluidics - Strong problem-solving skills and attention to detail.

Necesito a una persona con conocimientos de SolidWorks para ayudarme a realizar el ensamblaje de dos piezas. Además necesito apoyo con ANSYS ya que tengo pocos conocimientos. Si alguien esta interesado le cuento más sobre el trabajo que tengo que hacer por mensaje privado.

...a sequence of steps using the provided part files by using SolidWorks Composer. The final output format needed for this sequence is a video/animation and the Composer files. The ideal candidate should have experience in SolidWorks and SolidWorks Composer. In order to consider I will need to see sample animations and Composer files (you may upload them on your freelancer profile or send a secured link in your quote). Upon selection project milestone will be as follows-up, 1. Initial submission of sample steps from the full sequence 2. Final submission of the overall - full payment will be released after this step Please quote only if you have access to licensed SolidWorks Composer. Please write 'I have access to Licenced SolidWorks Composer'...

I am looking for someone to create easy tank drawing with piping assembly for industrial use. I require all views, including perspective, top, bottom, front, back, left, and right. The drawing only needs to be a basic outline and do not require specific dimensions or materials. The ideal candidate should have experience in industrial drafting and be proficient in creating technical drawings...easy tank drawing with piping assembly for industrial use. I require all views, including perspective, top, bottom, front, back, left, and right. The drawing only needs to be a basic outline and do not require specific dimensions or materials. The ideal candidate should have experience in industrial drafting and be proficient in creating technical drawings. Softwares used can be AutoCAD 3D or Solid...

I am in need of a talented SolidWorks designer to create a carpet washing machine for industrial use. The machine should be designed to perform water extraction for effective cleaning and washing carpet. I have a detailed list of design requirements that I would like the designer to follow, but I am open to suggestions. The ideal candidate should have experience in industrial machine design and be proficient in SolidWorks.

I am looking for a freelancer who can help me simulate two circular staplers on Solidworks and compare their mechanical performance on the tissue. I already have the 3D models of the staplers. The main criteria for comparison is mechanical performance, and I would like both static and dynamic analysis to be performed. Ideal Skills and Experience: - Solidworks proficiency - Mechanical engineering background - Experience with static and dynamic analysis - Attention to detail and ability to accurately compare results

Se trata de una caminadora para perros, cuyo motor va fuera de una tina, pero la caminadora va dentro de la tina, llena de agua. Por lo que hay que transmitir la fuerza del motor que se encuentra en un compartimiento seco, a el rodillo que hace girar la banda caminadora y que se encuentra sumergida en agua. El proyecto debe incluir las partes, su descripción, especificac...caminadora va dentro de la tina, llena de agua. Por lo que hay que transmitir la fuerza del motor que se encuentra en un compartimiento seco, a el rodillo que hace girar la banda caminadora y que se encuentra sumergida en agua. El proyecto debe incluir las partes, su descripción, especificaciones, recomendaciones y lugares donde adquirir las piezas en México. The project must be delivered in Sol...

I have a .DAE CAD file that I am looking to convert to a series of solid bodies in a .STP format that can ultimately be successfully imported into SolidWorks. The file is at I am only looking for the surgical table (circled) to be converted to solid bodies. I am a SolidWorks user and don't have proper tools to be able to import and modify .DAE files, so I am hoping this is an easy job for someone else with the right tools.

See attached file Looking for...Potential of many more projections Must be completed in Solidworks Requirements: Must have manufacturing/design experience. Design product in Solidworks only based on the provided link/files. Models and detail drawings with BOM required. Show hardware in detailed shop drawings. Sub-assemblies are required. Measurements & dimensions to be completed in Inches. Must use standard materials and hardware per attached file (if applicable) CNC layout (if applicable) Correct parts labeling required. Please confirm you can open all links prior to working on this project. If you do not have access to the links, then do not bid on this or future projects. 2-week time frame See attached files for completed sample PDF Final documents: Solidworks...

I'm looking for an experienced Freelancer who can help me with a Solidworks project. I am in need of someone to modify an existing design of mine that's in solidwork 2022 file format.I need to split the solidwork into parts for 3d printing purposes. I also need some slot so i can combine them together.

More details: What is the purpose of the 2D drawing and assembly? to answer test 1 Do you have existing designs or sketches? Attached the question paper & part to assemble What is the expected level of detail in the 2D drawing and assembly? Basic outline and dimensions

we require high-quality renders for use in marketing material. the files are in solidworks. outputs will need to depict real-life-looking items. the units comprise of HDPE, Galvanised Steel, and painted items. Solidworks files will be sent post award.

We need someone who knows 3D designing in solidworks, sheet metal, part design, etc. Freelancers from Delhi, India only will be considered.

I am seeking an expert in RoboDK and SolidWorks who can provide programming and designing assistance for my project. The project primarily focuses on automating a specific process using industrial robots. Skills and experience required: - Expertise in RoboDK and SolidWorks - Experience in programming and designing industrial robots - Ability to automate processes and improve existing systems The ideal candidate should be able to work efficiently and effectively to deliver high-quality results within the given timeframe. This is for phase one of an innovative project to build a robot arm to prepare fast food (sandwiches and wraps initially) without human involvement. Phase one = simulation and design of robot arm.

Design an assembly for a payout reel for a large spool of 3D printing filament. The assembly should include two bearings, a shaft, and supports to allow a filament spool to freely spin when filament is fed/pulled into a 3D printer. MUST USE AUTOCAD OR SOLIDWORKS Must create separate part files of each part (Dimensioned 2D Drawings of each part of assembly (Including Filament Spool) Include assembly file of the whole part (Dimensioned 2D Drawing of Assembly (Overall Dimensions, Assembled) 2D Drawing of Exploded View and Parts List (Include Materials in List)

I am looking for a freelancer to create 19 simple .DXF files for my project. The objects required in the files are 2D shapes and they need to be compatible with SolidWorks software. The project requires between 10-20 DXF files and the ideal candidate should have experience in creating 2D shapes and working with SolidWorks.

In reference to the patterns, they are doable however we would need dimensional information on the size of the handle, create the handle model and then create texture maps to apply as a 3D texture. Normally the 3D textures are bump maps, or texture maps (reference images) supplied by the customers. In this case, since these are custom patterns, I believe it woul...then if the desired result is manufacturing, then those maps can be applied to the handle model create the 3D grips for mold making. It’s not that we can’t make the texture maps, but this is usually for a graphic artist, and I think the most practical way of going about it is getting those patterns made into a texture/bump map, prior to creating 3D geometry. It is in the case of creating it in Solidworks anyway...

Need a solidworks model of the attached sketch. It is a half cylinder with a step in the OD and the ID

Looking for a long term partner to provide production quality drawings. Potential of 100s of projections Must be completed in Solidworks Requirements: Must have manufacturing/design experience. Design product in Solidworks only based on the provided link. Models and detail drawings with BOM required. Show hardware in detailed shop drawings. Sub-assemblies are required. Measurements & dimensions to be completed in Inches. Must use standard materials and hardware per attached file (if applicable) CNC layout (if applicable) Correct parts labeling required. Please confirm you can open all links prior to working on this project. If you do not have access to the links, then do not bid on this or future projects. 2-week time frame See attached files for completed sam...

...technical specifications, product manuals, and other documentation to support product development and manufacturing • Participate in product testing, troubleshooting, and quality control activities Requirements: • Bachelor's degree in product design, mechanical engineering, or a related field • 1-2 years of experience in product design and development • Proficient in CAD software such as SolidWorks, AutoCAD, or Fusion 360 • Knowledge of hardware design, including materials, fabrication techniques, and manufacturing processes • Creative problem-solving skills and ability to think outside the box • Excellent communication and collaboration skills, with the ability to take full ownership of work • Strong attention to detail and...

...looking for a skilled designer to create a shoulder mounted suction unit for automatic dry garbage collection. The unit should have the following specifications: Weight capacity: Less than 10kg Size requirements: Compact Power source: Battery-powered Ideal candidate should have experience in designing compact, lightweight devices powered by batteries. Experience in CAD modelling (preferably in Solidworks). The design must be backed by design calculation with scientific justification. The candidate should be able to design a unit that is easy to use and comfortable to wear. The design should be aesthetically pleasing and visually appealing. The candidate should be able to provide sketches and 3D models of the design for review before finalizing the project. The specifications o...