Mems design työt

I need an iPhone app. I would like it designed and built.

Hello, We are looking for an engineer / team to complete a project for us. This is a power electronics system, already developed, in its ...project for us. This is a power electronics system, already developed, in its last stage before production. We need to add a new feature and correct some issues. We need to develop an accelerometer system (based on part similar to MEMS sensor LIS2HH12 from ST), correct some bugs on the PCB (high level of noise) and finalize the firmware of the MCU (8 bit microchip Attiny family). So there is a hardware and software part. We have prototypes that will be send for development and testing. Sucessful candidate will be asked to provide a prototype and test its re-design. More info will be provided to shortlisted candidates. Thanks ...

Hi Julian A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I am looking for help defining the use of a 4 channel 24bit ADC. I have various MEMS sensors that will feed into the part and need a clear development "road map" that defines the various settings of the part, including filters and optimal methods to drive down noise. I set the hours only as 1 until we can discuss and you can tell me what you think.

I am looking for someone with experience with N...experience with Nordic nRF52832, LIS3DH, fingerprint, proximity, and algorithm. Main Electronic components of device: - Raytac’s BLE 5 Module based on Nordic nRF52832 (see attachment for more details) - ARM Cortex – M4F processor -LIS3DH 3-axis MEMS accelerometer _ fingerprint module Milestones will be as follow : 1. integrating fingerprint module and digital numeric keypad (touch screen) to the current design 2. Review existing components footprints and update according to datasheet. 3. PCB design modifications an development . 4. Create PCB 3D model with the electronic components 5. Provide completed manufacturing files. modifications, developments and testing

expert on comsol required who can simulate a mems based gas sensor using a ZnO based schottky diode

I am looking for someone with experience with Nordic nRF52832, LIS3DH, fingerprint, dig...experience with Nordic nRF52832, LIS3DH, fingerprint, digital Keypad for door entry password, proximity, and algorithm. Main Electronic components of device: - Raytac’s BLE 5 Module based on Nordic nRF52832 (see attachment for more details) - ARM Cortex – M4F processor -LIS3DH 3-axis MEMS accelerometer Milestones will be as follow : 1. integrating fingerprint module and digital numeric keypad (touch screen) to the current design 2. Review existing components footprints and update according to datasheet. 3. PCB design modifications an development . 4. Create PCB 3D model with the electronic components 5. Provide completed manufacturing files. modifications, de...

I have a ESP32 and a mems microphone. I want to connect the Mems microphone to the ESP32 and have it record audio files onto the sd card built into the esp32 module :) Let me know if you can help more with this. Thanks

i have a pcb with mems sensor on it i want to keep it at 150 degree celcius for half an hour. how to do it without damaging it.

A Raspberry PI software to be developed which includes the connection of the PI to 2 chips adxl 355. the following specifications are to be achieved: Here are the specs what need to be achieved:  60ug/Sqrt(Hz) up to 50Hz  100 samples for each channel  108dB dynamic range  3 axial MEMS accelerometer ADXL 355    Software:  Miniseed data storage  SDA/LTA or p-wave detection algorithm  Trigger operated with pre and post trigger settings 5min (user defined) Max 30days storage on device in ringbuffer (user defined) Sysop messages (3) different to:  Send peak velocities and timestamps to 3 different external servers  External server request to retrieve last mijiseed files.  Descripton of the interfaces will

For mini project I need compact IMU system. this system including the MEMS sensor (MPU6050 or BMI 160) for findouting the acceleration and degree of ratation. if anyone interested we can discuss clearly. sufficient amount LL be paid. Read Less

For mini project I need compact IMU system. this system including the MEMS sensor (MPU6050 or BMI 160) for findouting the acceleration and degree of ratation. if anyone interested we can discuss clearly. sufficient amount LL be paid.

...I am looking for is a skeleton of a firmware for a Nordic NRF52 device. The firmware should: On boot, sets up the pins and peripherals. Has functions to read/write I2C data to/from the IR Thermometer, Heart Rate & Pulse, Accelerometer, Gyro, Compass, ECG Clock, and Battery Charger. Has functions to read/write 4-wire SPI to/from the ECG sensor Has functions to read I2S data from MEMS microphone Has functions to read ADC value for Glucose Monitor Has functions to set a PWM output value for Red, Green, and Blue LEDs. Only used for human indication. 8bit resolution would be fine on the PWM as long as the strobe is kept higher than 30Hz. Want to be able to adjust the clock a bit it is on in case there is an alias with the IR thermometer or heart rate/pulse...

well already have site but working on it independently need help with upgrading it , like the front page would like more animation or effects like me talking or pulling mems out a cloud or doing a video and sending it to you and you adding effects i do not know , but more effects and dazzle and helping me to direct people to my other links separately from my website if there looking for funding they can go directly from internet by googling funding for business and go directly to that page instead of the front home page etc , can you take a picture and add and add or change color in my wardrobe and cut background out

Firmware for LIDAR and MEMS IMU (accelerometer/gyro) data collection and processing. The firmware will simply collect streaming LIDAR data into a 2,520 circular DMA buffer via UART at 230,400 baud. The IMU is a LSM6DS3US via I2C that will trip a hardware interrupt on the STM32F0 when the measurement data is ready. The STM32F0 will read the IMU data and calculate 3 variables regarding the physical movement of the sensor on a 2d plane in mm and rotation in degrees. The variables are X in mm, Y in mm and Rotation in degrees. When 0x67 is received over the second UART 2, the three navigation variables and the entire contents of the UART 1 circular dma buffer will be transmitted to UART 2. To make this simple for you, we will provide a functioning in-house development PCB package that ...

...great alternative to fitness, Why training in a team is better than train alone, etc. - Create funny pictures or Mems related to the sport Brazilian Jiu-Jitsu Since people have the assumption that doing a fight sport is brutal and harsh, we have to show them the other side. This sport is mostly referred to as "The game of human chess". Our gym quote is "Train hard, have fun and succeed, all with a sense of humor" and that is exactly what we want to reflect in all our advertisements and still looking professional. The articles will be published on our website and must be unique. Al facts you lay down must be backed by a research/article/authoritative websites, etc. The pictures/Mems/ or otherwise creative funny creations will be published on our Faceb...

Hi, I have the nRF52840-DK and need to connect the ICS-43432 digital I2 S MEMS microphone. I need to know how to connect the ICS-43432 chip via I2S. Then I need a program that can stream data from the microphone chip and store for example 30 seconds of streaming data in the memory. The lenght of the continuous sampled file should be possible to set via a parameter. I have planned to connect the MEMS microphone to the nRF52840 board by using a simple development board => If this looks ok I have more work for you on the same project!

New logo needed to update previous ones. Would also like a banner for social media. Will require high res files which can be used for printin...for social media. Will require high res files which can be used for printing & web as well as references for colours used and font name as we'd like to have business cards and compliment slips etc. printed using the new logo. Would like as a jpg too please. The business is a garage - we repair, service and MOT cars and light commercials. The name is Mark Ellis Motor Services known sometimes as MEMS. Uniforms /company colours are dark blue and red. Attached is an image of the logo as it is on a sign currently. All ideas welcome, please let me know if you have any questions or need more information. There's currently no...

We are looking for an expert in Speech to Text / Natural Language Open Source Code. Our product's primary interface is with voice commands. We have a MEMS microphone and speaker. Economically, it is simply not viable to use cloud services such as Google's, Alexa's, or IBM's Voice APIs. The user interaction with our device is very simple and limited to only a few commands/actions. It should be possible to host our own OPEN SOURCE Speech to Text / Natural Language API and allow our own devices to connect to it to convert speech to text, determine the nature of the command, take appropriate action and then return a text that is converted to speech for the user to hear or text to initiate a pre-recorded message. In addition, we would also like to provide the cap...

ufgabe , die ich Ihnen vorstellen will. Hier ist die Aufgabestellung: Entwerfen und implementieren Sie unter Verwendung von μVision 4.74 ein Programm, welches mit der zur Verfügung gestellten Hardware (STM32F4DISCOVERY + Platine mit 3 MEMS-Sensoren) die zeitlich veränderlichen Roll- und Nickwinkel des Systems in Echtzeit bestimmt. Verwenden Sie als Ausgangspunkt die Projekt-Dateien aus der Vorlesung. Das habe ich schon komplett programmiert aber ich bekomme eine falsche Ergebnis. meine Aufgabe wäre meine Lösung zu kontrollieren und mir sagen warum ich so schlechte ergebnisse bekomme.

Entwerfen und implementieren Sie unter Verwendung von μVision 4.74 ein Programm, welches mit der zur Verfügung gestellten Hardware (STM32F4DISCOVERY + Platine mit 3 MEMS-Sensoren) die zeitlich veränderlichen Roll- und Nickwinkel des Systems in Echtzeit bestimmt. Verwenden Sie als Ausgangspunkt die Projekt-Dateien aus der Vorlesung.

more details will be given in the chat, serious bidder with good mechanical proposal only

Task of the project is to optimize the shape of the comb drive actuator in Comsol 5.1 Multiphysics software. Assumptions: Objective function is to maximize the electrostatic force, with minimization of the mass. The thickness and applied voltage is constant value. There are some screenshots of 2D/3D models: I'll send to You all required files.

optimiziation of the MEMS Actuator..dont bid if you dont have experience

I working on the optimiziation of the MEMS Actuator - Comb Drive. Purpose of my project is to optimize the shape of the structure in Comsol Multiphysics 5.1 environment. For someone, it will be an easy task and fast way to earn some money. I'll send to You all required files. You only need to optimize ( obj. function as maximum electrostatic force / obj. function as minimization of the mass ) the shape via matlab software or matlab. There are some screenshots of 2D/3D models:

I working on the optimiziation of the MEMS Actuator - Comb Drive. Purpose of my project is to optimize the shape of the structure in Comsol Multiphysics environment. For someone, it will be an easy task and fast way to earn some money. Im sending to You all required files. You only need to optimize ( obj. function as maximum electrostatic force / obj. function as minimization of the mass ) the shape via software or matlab.

...disadvantages of GPS, but its accuracy deteriorates in the long-term due to sensor error. Especially the error of MEMS INS increases rapidly due to huge errors of low cost MEMS sensor. Integration both INS and GPS provides performance as a reliable navigation system .The measurements from MEMS INS with GPS are mixed using data fusion technologies such as Kalman filter (KF) to generate the optimal PVA solution .One existing problem of such cost-effective integration system is the heavy reliance on GPS signal availability. The system PVA accuracy would degrade sharply without GPS update due to the poor performance of low-cost MEMS inertial sensors. An integrated system of GPS and Low cost MEMS INS is often used in UGV. To overcome the limitations. AI usi...

design mems switch I need to design MEMS SPST switch (cantilever or bridge type, we can discuss) by using ANSYS or COMSOL. It will be used for reconfigurable antennas. But in this work, only the switch design is needed. """"It is not too important which software will be used, important thing is create graphs according to given R and C values. And also the mems switch structure doesn't need to be too complex, it can be similar to the structure at Comsol MEMS tutorial"""" It can be similar to comsol mems switch that is attached so I think it's not so complex project. The structure doesnt need to be complex, it should only answers the values of R and C budget for this work is 30...

I have a GUI for displaying 4x4 temperature array and ambient temperature from from MEMS sensor and i also have a calculation panel for calculating the temperature of solar cell (looping and delayReceive) ,so what i need now ,is to construct a log message which shows the message of "the hotspot is detect on [x,y]" if hotspot is spotted (if one of the array temperature is higher than the calculation temperature .and expect the hotspot could be more than 1 location) ,else show message " no hotspot occur" . the component i used for my project is D6T omron MEMS sensor and a USB webcam . Additional quest :Superimpose the video with the UIcontrol (static text) question : i know that UIcontrol (Static Text) doesn't have the feature for altering alpha v...

I need a PCB board to be printed and assembled, the diameter should be 8mm (See Images). I do have the Gerber files ready to send for who's interested.

I need a PCB board to be designed, the diameter should be 7.5mm and there is a possibility to change the 6 holes to a 5 holes. (See Images). Schematic attached. I have schematic and need gerber file to send for a company to print the board (if you also print it let me know).

I currently working on arduino which is i need to get the hotspot from my own solar panel ,i am using a D6T MEMS Sensor ,and i hope to create a MATLAB GUI which consist of real time graph of temperature data ( if ambient temperature can be shown just add to the axis OR tell what sensor i need to use ) and 4X4 array (from the MEMS sensor).Overall ,it just a serial reading from my arduino code. this is my connection of arduino to D6T SCL - A5 SDA - A4 VCC - A3 GND - A2

Hey bro, I talked to you about my MEMS report but I lost you for some reason, contact me as soon as you can so we can start working the report please

I need to create a sound level meter for ambients with 4 MEMS digital microphone, I2S protocol. Also need to show those infos in a 7" LCD display and save those info to a file on the sd card. The hardware connection and communication between the Raspi Pi to communicate with the ICS43434 I2S Digital MEMS Microphone is done, the mic outputs 2 words of 32 bits each, for right and left channels, from those 32 bits, 24 bits are used for signal data as you can see on the images. The code has to be well commented and a simple tutorial on how to use/implement the code /libraries should be created. The main goal is to get the data from each microphone and transform this digital data to decibel (dB) with A-Weighting scale, and also make a Fast Fourier Transform (FFT) to dis...

I need to create a sound level meter for ambients with a digital microphone. Also need to show both infos in a 7" LCD displya and save those info to a .csv file. The hardware part for the development is a STM32L496RG MCU and is already setup with STM CubeMX to communicate with a ICS43434 I2S Digital MEMS Microphone which outputs 2 words of 32 bits each, for right and left channels, from those 32 bits, 24 ares used for signal data as you can see on the images. I'm using Keil IDE to debug and load the code to the board. I can provide the code that I have so far and also the registers which the data is being fed so you can keep going from there. The main goal is to get the data from each channel of the microphone and transform to decibel (dB) and also make a Fast Fouri...

Create a real time audio effects machine. provided with a MEMs microphone to capture human voice and an audio amplifier to output your signal through earphones. This manual introduces you to the various concepts involved, and guides (not walks!) you through getting an audio FX machine up and running. Details given below

السلام عليكم بشمهندس عندي اسئلة في MicroNanoSystems, MEMS, and NEMS تحتاج لحل يوجد متيريال يساعد للاجابة هل تستطيع حلها في اقل من 12 ساعة وشكرا

Hi ! I would like to create a COMSOL tutorial, but I don't have enough time. Therefore, I am looking for someone who could extend an existing tutorial. I am searching for a COMSOL specialist. This is the COMSOL tutorial which should be extended: I have included to this project the original tutorial file, where I included the things that should be added. Please note that the added information should be detailed and clear.

I would like to have a fully documented simulation of an electrostatic actuation of a mems structure. The mems structure is described in the attached document. I am interested to know the deflection and stress with respect to the applied voltage. All simulation should be done by an *open source software of your choice*. Please also include a tutorial on how to set up the open source software.

Hi Muhammad H., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Basically, I have a schematic of MEMS sensors feeding an analog processing chip, to an ADC to a PIC micro. we built 3 for prototype test and there is a short that we simply cannot find. At this point, all I am looking for is help finding the short before building more. Could be a manufacturing problem, just not sure.

Basically, I have a schematic of MEMS sensors feeding an analog processing chip, to an ADC to a PIC micro. we built 3 PCBs for prototype test. the first was populated and had a short. then we tested the bare PCB and there is a short that we simply cannot find. At this point, all I am looking for is help finding the short before building more. Could be a manufacturing problem, just not sure. I have an Eagle project and the generated gerbers and schematic.

Hi Muhammad B., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have a sensor project with a MEMS sensor, ADC and PIC micro. the prototype board evidently has a short. I need someone to look things over and see if they can find the fault & maybe other problems. Do you have Eagle? I have an Eagle project and schematic.

Hi Muhammad H., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Basically, I have a schematic of MEMS sensors feeding an analog processing chip, to an ADC to a PIC micro. we built 3 for prototype test and there is a short that we simply cannot find. At this point, all I am looking for is help finding the short before building more. Could be a manufacturing problem, just not sure.

Manufacturing two 16-channel microphone adapter PCBs, and Manufacturing 20 single channel analogue MEMS microphone units.

ASICs, MEMS and Smart Devices, will discuss further.

ASICs, MEMS and Smart Devices, will discuss further.

I need to know what model+manufacturer+Distributor for accelerometers in the following phones: Samsung Galaxy Note 8 iPhone X LG V30 Samsung Galaxy S8 Google Pixel 2 iPhone 8 Moto G5 Plus Moto E4

I need to know what model+manufacturer+Distributor for accelerometers in the following phones: Samsung Galaxy Note 8 iPhone X LG V30 Samsung Galaxy S8 Google Pixel 2 iPhone 8 Moto G5 Plus Moto E4

We do need a small PCB with 4x MEMS Microphones, like the MP34DT01 from STMicro. Job consist of routing the PCB, creating the layout with small suitable MCU providing an USB interface for sound stream. Experience requested in AUDIO to create the design and measurement for the suitable gasket (!) for best sound behind a steel wall of a kiosk system. Optional Alexa AVS integration. 3D design for production for proper assembly of the microphone board behind a steel wall.

We are looking a design for our product. The design is small PCB (less than 4cmx4cm) and contain 1) motion detection circuit - based on mems. when motion sense then the system is working 2) MCU to count how many times the motion sensor detected motion 3) RTC with timer for every 24 hours 4) Coin battery operated I am looking for a designer with experience. Please specify design and layout process After this stage, there is possibility for ongoing work with this design

Dear all, my team is looking for a mem designer for our website: You need to find 400 funny images using google search and add some funny text (see attachment as example). *** Mems cannot violate copyright of other websites ***