Filtrér

Mine seneste søgninger
Filtrer ved:
Budget
til
til
til
Slags
Færdigheder
Sprog
    Job-status
    2,000 usb sniffer arduino jobs fundet

    ...unable to update firmware remotely, the OTA process is not reliable and the encrypted firmware updates are failing. - **ESP32 Background Information:** I'm using an ESP32 Development board for this project. The application running on this hardware was developed using Arduino. - **Necessary Skills Most Needed:** A freelancer with advanced knowledge of ESP32 and an understanding of the OTA process including familiarity with encrypted firmware updates will be best suited to tackle this issue. Proficiency in Arduino is also necessary. Given that this project deals with the inability to update firmware remotely, familiarity with networking would be an added advantage. Connecting to XXX W (84) wifi: wifi nvs_open fail ret=4353 E (84) wifi: wifi_init 1410 ret=...

    €481 Average bid
    €481 Gns Bud
    4 bud

    skal bruge færdigt projekt til: wifi data. sende en e-mail når en knap aktiveres der skal tilkobles 2 knapper der skal send forskellige beskeder der skal bruges dns da ip ændre sig skal kunne modtag data til at tænde led skal kunne gemme data hvis forbindelse svigter og sende når der er forbindelse igen

    €90 Average bid
    €90 Gns Bud
    2 bud

    Vi ønsker udviklet en windows dll, der henter et billede hurtigt ind fra et usb endoscope kamera. Dll'en skal bruges i Labview vie dll kald.

    €364 Average bid
    €364 Gns Bud
    1 bud

    Hej, Vi er igang med at udvikle en hjemmeside til vores forretning, og har i forbindelse med det brug for en software til et usb stik. USB stikket skal fungere som en boot loader, der får startet vores hjemmeside op, ved forbindelse til en computer. Softwaren skal kunne arbejde med LINUX. Spørg endelig, hvis du har nogle spørgmål. Hi, We're in the middle of developing a website for our new buisness, and are in need of a software suitable for a USB stick. We want the USB software to work as a boot loader, which starts up our website when connected to a computer. The software should be able to work with LINUX. You're welcome to write us, if you have any questions.

    €208 Average bid
    €208 Gns Bud
    1 bud

    Ønsker at kunne læse data fra en USB enhed som leverer serielle data.

    €253 Average bid
    €253 Gns Bud
    1 bud

    Design af produkt emballage til kabler, USB oplader, rejseadapter, mv. Jeg søger en person, der kan bistå med udvilking af design af emballage til produktserie inden for tele tilbehør, fx iphone covers, mv. Det er kun emballagen der skal designes i et lækkert design, med et eksklusivt udtryk i stil med Apple. Hvid carton med mulighed for at hænger produkterne på væg i butikker. Eget eksempel på design udkast kan fremsendes. Mvh. Søren Larsen

    €212 Average bid
    €212 Gns Bud
    6 bud

    I'm on the hunt for an experienced professional to help me enhance my YouTube channel, which primarily focuses on interviews and podcasts. I specifically need guidance on setting up my audio equipment, which currently consists of a USB microphone, and general advice on how to drive channel growth. Key Requirements: - Experience with audio setup equipment - Background in podcasting and webcasting - Proven track record in YouTube channel growth - Proficiency in video editing tools and software While I would consider myself at an intermediate level with audio setup and editing, I'm eager to learn and improve. Your role will be pivotal in helping me understand the intricacies of audio production and channel management. The budget for this project is under $500.

    €156 Average bid
    €156 Gns Bud
    12 bud

    I'm experiencing a couple of frustrating technical issues with my Windows 10 system. 1. USB Device Recognition: - My system is not recognizing USB devices, specifically a serial communication device. - I've attempted reinstalling the USB drivers but to no avail. 2. Second Display Detection: - I'm also unable to detect my second display. Ideal skills for this project include expertise in Windows 10 troubleshooting and USB driver management, as well as knowledge on how to configure and troubleshoot dual display setups. I would appreciate a professional who can efficiently diagnose and resolve these issues.

    €25 / hr Average bid
    €25 / hr Gns Bud
    7 bud

    ...75 teclas. El trabajo que tiene que hacer es proponer un procesador (Arduino, raspberri, etc ) , determinar las conexionas al pcb con la matriz del teclado, programarlo para que lea las teclas y un par de sensores mas y hacer que envie una señal MIDI al reproductor de sonido. Debe tener conocimientos en programación y electrónica. Actualmente, el proyecto está dividido en tres partes: teclado, procesador y reproductor de audio. El teclado cuenta con una disposición particular en matriz de 9x8 con diodos y debe permitir la lectura simultánea de hasta 8 teclas. El diseño del PCB está realizado, pero falta definir el procesador ideal para optimizar su funcionamiento. En cuanto al procesador, se realizaron pruebas con Ardu...

    €14 / hr Average bid
    €14 / hr Gns Bud
    7 bud

    Looking for a skilled engineer to help design an Arduino-based solar tracker with GPS. The primary task is to ensure the system can adjust the solar panel orientation in real-time to maximize solar energy capture. Key Requirements: - Design a system that allows for real-time solar panel orientation tracking. - Ability to integrate with an Arduino board and a GPS module. - Knowledge of solar energy systems and their tracking requirements. - An understanding of the capabilities and limitations of the components at hand (Arduino board and GPS module). The ideal candidate will have previous experience with similar projects and a deep understanding of Arduino programming and solar tracking systems.

    €756 Average bid
    €756 Gns Bud
    21 bud

    I need a talented animator to animate a Minecraft Sniffer with specific actions and behaviors. The Sniffer should be performing: - Digging - Sniffing - Walking - And most importantly, talking. The dialogue should be in-game related chatter. Ideally, you should have a deep understanding of Minecraft and its dynamics. Key requirements for your bid: - Previous experience animating Minecraft mobs - Ability to create engaging in-game related dialogue - Strong understanding of Minecraft mechanics and behaviors

    €110 Average bid
    €110 Gns Bud
    29 bud

    I'm seeking a solution for my Windows system to ensure a specific USB device - a Zero Delay Arcade DIY KIT USB ENCODER PC TO JOYSTICK - always appears last in the Game Controllers USB list. This should be consistent across different USB ports, reboots, and system configurations. Key Requirements: - The device should always be identifiable by its position in the list, regardless of how or where it's plugged in. - If absolutely necessary, I'm open to installing additional software or drivers to achieve this goal, but I would prefer not to. Ideal Skills: - Extensive knowledge of Windows operating system. - Proficiency in USB device management. - Experience in software installation and system configuration. Prefer a software-based solution t...

    €146 Average bid
    €146 Gns Bud
    22 bud

    ...Project: A low-profile USB 2 Type A memory stick is being incorporated into a prototype toy product. It requires a really simple small PCB consisting of: - USB-C socket connector - USB 2 Type A connector - 6 pin edge connector The low-profile memory still will connect to the onboard USB 2 Type 2 socket. The whole PCB will then connect to a desktop computer via a standard USB-C data cable, plugged into the PCB mounted USB-C socket. The PCB will at a later date, be connected to another device via a PCIe style edge connector It is not expected that the PCB will be connected to both the USB-C and the edge connector at the same time. The freelancer will create the PCB design in the correct dimensions and add tracks connecting the USB...

    €55 Average bid
    €55 Gns Bud
    19 bud

    ...private keys and signs the messages/transactions provided by the android application through NFC. The Android app is open source and available here: The NFC card is also open-source and based on this applet: The android app already supports different hardware wallets (Jade, Ledger and Trezor) using USB and BLE connectivity. We would like to reuse the same flow and functionalities as much as possible, but through NFC. We can provide support, in particular regarding Satochip communication protocol (and an SDK is available for this). The work consists mainly in integrating the NFC communication with the android application. The developer will need a Satochip NFC card (and NFC-enabled smartphone)

    €3008 - €5013
    Fremhævet Forseglet
    €3008 - €5013
    49 bud

    I'm seeking a skilled programmer to write an Arduino code for a BQ25887 Charger 5 click USB charging IC board. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () The following features are required: 1. *Charging Control Setup:* - Configure I2C communication with the BQ25887 IC and set parameters for automatic charging initiation. - Define maximum voltage (4.2V per cell) and current (1A per cell) limits. 2. *Temperature-Based Charging Adjustment:* - Monitor the temperature using the NTC pin and adjust the charge current accordingly. - Implement safe temperature thresholds to reduce or

    €689 Average bid
    €689 Gns Bud
    16 bud

    ...Requirements: - Setup and configuration of Raspberry Pi 5 & Hailo - Customization for AI and machine learning tasks - Proficient in working with computer vision tasks, natural language processing, and data analysis - Proficiency in Docker for deployment. - Previous experience with object detection vision AI apps. - Knowledge of working with live camera feeds. - Ability to ensure seamless integration with a USB webcam, IP camera, and Raspi Cam - user and tool database interface for tool checkin/out management - copy tmux, tmuxinator, powerline etc to this device from my old one Windows on-premise integration is a must among other platforms. Additionally, I will need the following software pre-installed on the Raspberry Pi 5: - TensorFlow

    €587 Average bid
    €587 Gns Bud
    9 bud

    ...microcontroller and implementing the Modbus protocol. The task involves writing code for the ESP32 that can effectively interface with an energy meter. The code should accurately and efficiently read and process data from the meter. Key Responsibilities: - Developing code in the Arduino IDE to control the ESP32. - Implementing Modbus protocol for communication with the energy meter. - Ensuring accurate data handling and communication. Ideal Skills & Experience: - Extensive experience with ESP32 programming, specifically in the Arduino IDE. - Strong understanding and previous experience with Modbus protocol. - Experience with data handling from energy meters is a plus. Please provide relevant examples of your previous projects with your application. Note that the spe...

    €149 Average bid
    €149 Gns Bud
    43 bud

    I need my ODOO 18 Enterprise system integrated with my POS system to enhance Final Features of the System V Incoming call detected by USB 56K Modem v Customer identified or created in Odoo V POS order automatically created Caller information displayed in the POS UI Now, every time a customer calls, the cashier sees their phone number and order, making it easy to process orders by phone!

    €542 Average bid
    €542 Gns Bud
    14 bud

    We are looking for an experienced Android developer to create a test application with the following features: Requirements 1. Support for two external UVC cameras (connected via a USB-C hub). 2. Simultaneous recording of both cameras, each to a separate file. 3. Lag-free preview of both camera feeds on the main display. 4. Built with Android 14. Deliverables include full source code and clear documentation on setup and implementation. Payment Full payment upon successful delivery and verification that everything works as expected. If you have prior experience with UVC cameras on Android and can accomplish this efficiently, we'd love to hear from you! ?

    €130 Average bid
    €130 Gns Bud
    37 bud

    ...ADC to perform the signal conversion. The conversion process must be reliable, even with low signal levels typical for such measurements. Communication via RX/TX Interface (FTDI) The device shall include a communication module for data transmission. The communication interface will be implemented using an FTDI chip (e.g., FT232R), which converts the UART signal to USB or another compatible interface, enabling data transmission via RX/TX lines. After conversion to digital form, the data should be formatted as a packet or text, compliant with the chosen communication standard, and then transmitted to the host system. Power Supply and Operating Environment The project must account for the device operating in an environment w...

    €4328 Average bid
    €4328 Gns Bud
    7 bud

    ...PCB that integrates an Arduino Nano, an L293D motor driver, and connectivity for additional components like servo motors, an ultrasonic sensor, and infrared sensors. The PCB should be compact, efficient, and optimized for easy assembly. SAMPLE layout design attached ( resistor, capacitor and voltage controllers to be added as required ) Project Requirements: Microcontroller: Arduino Nano (ATmega328P) Motor Driver: L293D (Dual H-Bridge) for controlling two DC motors Servo Motor Control: Two male header pins for connecting two servo motors Powered by 5V from the Arduino or external power Sensor Connectivity: One female header (4 pins) for an ultrasonic sensor (HC-SR04) Two male header pins for IR sensors (typically 3-pin each: VCC, GND, OUT) Power Supply: 5V for ...

    €37 Average bid
    €37 Gns Bud
    10 bud

    Basically need to setup VPN and connect with windows RDP ( I already have windows RDP ) only issue is to make vpn work first on custom distro and than i think it should be easy to connect with windows RDP P.S - I don't have remote access as I'm running it via Live USB

    €130 Average bid
    €130 Gns Bud
    11 bud

    ...in circuit board design - Expertise in Pic chip processing - Familiarity with micro circuit boards - Proficiency in handling circuit boards for data signals from Pic We had a board that had the effect we are interested in, but we ran out. We are making new stock and we want to modify a few things about it. I have attached an image of our out of stock board. We have the code already, it's in Arduino C but need to be coded to the pic we select. We are looking Pic12F675 at but are open to your suggestions. We need 3 outputs to LEDs with special effects and 1 output that bypasses the circuit where solid LEDs can be attached. There will be 1 input from power and an input from the Rheostat to adjust speed. Here is what it does: Please provide examples of your

    €22 / hr Average bid
    €22 / hr Gns Bud
    24 bud

    I'm facing performance issues with my Arduino server-client application. It currently only processes and sends information to the phone once, instead of looping continuously. Ideal skills and experience for the job: - Expertise in Arduino programming - Experience troubleshooting performance issues - Knowledge of server-client architecture - Able to optimize for speed and scalability - Strong problem-solving skills The main performance issue is the protocol for looping the client data in the app. The application currently uses the WebSocket protocol for server-client communication. The main optimization goal is efficiently reloading new data and maintaining the connection. Please note that there are other constraints to consider: none. Please account for changes on t...

    €328 Average bid
    Haster
    €328 Gns Bud
    18 bud

    ...-You’ll be selling to a pre-qualified list of 200 businesses that are already buying from us through different channels. -Work with a trusted brand in the technology industry. -Enjoy the challenge of direct sales outreach and relationship-building with businesses. Responsibilities: -Engage directly with B2B clients through phone calls and in-person meetings. -Promote and sell SanDisk memory cards, USB drives, and storage solutions. -Build strong relationships with decision-makers to convert them into direct buyers. -Understand customer needs and offer tailored solutions. -Meet and exceed sales targets through proactive outreach. Ideal Candidate: ✅ Proven experience in B2B sales. ✅ Excellent communication and interpersonal skills—you know how to sell! ✅ Comfortable w...

    €20 / hr Average bid
    €20 / hr Gns Bud
    10 bud

    I'm seeking an experienced embedded circuit programmer to develop a microcontroller-based system for interfacing with motion sensors. Key Requirements: - Develop a microcontroller-based system. - Integrate with motion sensors. - Experience in sensor interfacing is crucial. - Knowledge of embedded programming is essential. - Ability to process sensor...Requirements: - Develop a microcontroller-based system. - Integrate with motion sensors. - Experience in sensor interfacing is crucial. - Knowledge of embedded programming is essential. - Ability to process sensor data in real time. An understanding of how to effectively program, interface and communicate with motion sensors is vital for the success of this project. The system should be developed using Arduino as the microcontr...

    €13 Average bid
    €13 Gns Bud
    14 bud

    Description: We are looking for a skilled hardware developer to create a specialized hardware module featuring two cameras: one Infrared (IR) camera and one RGB camera. The primary goal of this module is to enable face recognition functionalities. Requirements: Develop a hardware module that supports USB connectivity for seamless integration with Android devices. The module must utilize Android's USB Video Class (UVC) to allow live streaming and camera feed from both IR and RGB cameras. Candidates may either reverse engineer a standard camera module or design a new module from scratch to meet the project specifications. Goal: The end objective is to effectively capture live streams from both the IR and RGB cameras for face recognition applications. If you have the e...

    €147 Average bid
    €147 Gns Bud
    19 bud

    Create a usb bootable with macOS to boot on iMac

    €26 Average bid
    €26 Gns Bud
    4 bud

    Potrzebuję prostego połączenia Arduino Uno r4 Wifi z bazą danych, aby np. zapisywało sie w tabelach właczenie i wyłączenie diody. Zpis musi byc bezpośrednio do SQL

    €116 Average bid
    €116 Gns Bud
    11 bud

    ...looking for an experienced PCB designer who can design a custom PCB for me based on a provided sample PCB. Key Details: - The PCB must adhere to specific dimensions (e.g. 100mm x 50mm). - The primary function of the PCB has not been specified, so flexibility and versatility in design are key. - The PCB should be designed with potential connectors and interfaces in mind, although specific types (like USB, HDMI, Ethernet) have not been pre-determined. Ideal candidates for this project should have: - Extensive experience in PCB design, especially designing based on sample reference PCBs. - Ability to work with specific size constraints. - Creative problem-solving skills to design for an unspecified primary function. - Knowledge of various connectors and interfaces for potential i...

    €72 Average bid
    €72 Gns Bud
    15 bud

    ...looking for an experienced PCB designer who can design a custom PCB for me based on a provided sample PCB. Key Details: - The PCB must adhere to specific dimensions (e.g. 100mm x 50mm). - The primary function of the PCB has not been specified, so flexibility and versatility in design are key. - The PCB should be designed with potential connectors and interfaces in mind, although specific types (like USB, HDMI, Ethernet) have not been pre-determined. Ideal candidates for this project should have: - Extensive experience in PCB design, especially designing based on sample reference PCBs. - Ability to work with specific size constraints. - Creative problem-solving skills to design for an unspecified primary function. - Knowledge of various connectors and interfaces for potential i...

    €80 Average bid
    €80 Gns Bud
    9 bud

    I am using Tail OS as read only mode via USB > Created temporary persistant storage for installing tools but I need some minor help related to IP tables or the tools

    €19 Average bid
    €19 Gns Bud
    4 bud

    I'm looking for an expert in Arduino projects to help me create a fun demonstration locking system. The project involves: - 3x Adafruit rotary encoders over i2c - 1x 20x4 LCD over i2c - 2x LED outputs The rotary encoders will serve as the main user input for the locking system. The LCD will provide feedback for user inputs, and the LED outputs will display the system status. Ideal candidates for this project should have extensive experience with Arduino, rotary encoders, LCD displays and LED outputs. An understanding of I2C communication protocol is crucial. Please include in your proposal examples of similar projects you have completed. The LED outputs will show the status of the locking system. Power supply for the system will be battery-operated.

    €22 Average bid
    €22 Gns Bud
    23 bud

    I'm seeking an expert in Arduino programming and web data extraction to create a phone system that can pull text data from a 3rd party website in real-time. The extracted data does not need to be stored on the home server; the focus is purely on the extraction process itself. Ideal Skills and Experience: - Proficiency in Arduino programming, particularly in using it as a Human Interface Device (HID) - Experience in real-time web data extraction - Knowledge of setting up and working with a home server - Ability to work with and extract text data from a 3rd party website - Telephony/VoIP Expertise: Experience with services like Twilio, Asterisk, or similar. - Programming: Knowledge of Python, Node.js, or similar languages to integrate the phone system with the server. - ...

    €1182 Average bid
    €1182 Gns Bud
    51 bud
    Hardware device in Arduino
    3 dage left
    Godkendt

    Need to develop a device to monitor data from a weapper machine.

    €2909 Average bid
    €2909 Gns Bud
    58 bud

    ...ESP32. This code is primarily designed for controlling a serial device called Valentine 1 radar detector. Key Requirements: - Modify existing code from the provided GitHub repository [] to work with ESP32. - Enhance compatibility with Arduino IDE 2.x if possible. - Assist with the handling of serial packets. - Implementation of UART and rs232 communication protocols. The ideal freelancer for this project would have: - Extensive experience with both AVR ATMega 2560 and ESP32 microcontrollers. - Proficiency in Arduino IDE, particularly the 2.x version. - Strong background in working with serial devices. - Deep understanding of the UART and rs232 communication protocols. Please refer to the attached Extended Serial Protocol User’s Guide, which was used to create the...

    €72 Average bid
    €72 Gns Bud
    32 bud

    I'm looking for someone to code a simple Arduino for me. The project involves: - Monitoring motor temperature and humidity - Motor control - Using a proximity sensor - Develop a simple user interface for displaying sensor data. - Enable remote monitoring via Wi-Fi or Bluetooth. The ideal freelancer for this project should be proficient in Arduino programming and have experience with motor control and sensor integration. The project will involve programming for a stepper motor. The user interface will use an LCD display for showing sensor data. Please include directional control for the motor operation. The project will enable remote monitoring via Wi-Fi. The development will be done using the Arduino IDE. Use simple on/off control for motor operation. The remot...

    €127 Average bid
    €127 Gns Bud
    55 bud

    I require an experienced embedded C/C++ programmer to assist with my project which is using the CH32F103C8T6/CH32X033F8P6 MCU. The project involves working with either Zephy...I am facing are compilation errors, runtime error. The work won't take much time as the code has already been generated by LLM only error correction is needed. Key Requirements: - Extensive experience in embedded C/C++ - Proficiency in either Zephyr or RT-Thread RTOS - Ability to troubleshoot and fix AI-generated code - Experience with the CH32F103C8T6 MCU Please note that mere knowledge of Arduino is not sufficient for this task. Your role will primarily involve code testing and completion, so a keen eye for detail and strong debugging skills are essential. The freelancer needs to complete the project...

    €3 / hr Average bid
    €3 / hr Gns Bud
    6 bud

    I'm looking for a 500ml hydrogen water bottle made of plastic. The design should be a transparent bottle. Key Features: - Built-in digital display: The bottle should have a display that shows relevant information. - Temperature control: It should be able to keep the water at a desired temperature. - LED lights: The bottle should have LED lights, possibly for aesthetic purposes or to ind...the hydrogen concentration level and the current temperature. The bottle should be made from Tritan plastic. The digital display should show the hydrogen concentration level, current temperature, and battery status. The bottle should have a sleek cylindrical shape. The LED lights should display multiple colors based on the functionality and status of the bottle. The portable charger should be a ...

    €290 Average bid
    €290 Gns Bud
    18 bud

    *** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in ...

    €11 / hr Average bid
    €11 / hr Gns Bud
    6 bud

    ...small mixed-signal PCB using FLUX .ai. The primary function of this circuit will be for STM32 or ESP32. Key Requirements: - Proficient in designing mixed-signal circuits - Experienced with FLUX .ai - Capable of designing small PCBs Ideal Skills: - PCB design - Schematic creation - Signal processing expertise - FLUX .ai proficiency The PCB dimensions are flexible. The PCB should be designed to be USB-powered. Please prioritize the placement of essential components based on power and signal requirements. The PCB should support both analog and digital I/O connections. The PCB should be designed to fit a custom enclosure. The PCB should support high-speed operation for the STM32 or ESP32. The dimensions for the custom enclosure are flexible. The PCB should include standard GPIO p...

    €14 Average bid
    €14 Gns Bud
    2 bud

    I'm looking for a skilled coder who can write a working code for Arduino. The project involves the ESP8266 and Waveshare 2.13inch E-Ink Screen Display HAT (B) for Raspberry Pi. Key Requirements: - The primary function of this project is to show images on the E-Ink screen. The images will be in 212x104 resolution, but the code should also be adaptable for 2.97 inch and 4.7 inch screens. - The code must support all three resolutions: 2.13, 2.97, and 4.7 inches. - You will need to provide schematics of wiring for the ESP8266 with the E-Ink screen. - Ideal candidates should have experience with Arduino, ESP8266, and E-Ink displays. Skills in coding for multiple screen resolutions and creating wiring schematics are essential.

    €12 Average bid
    €12 Gns Bud
    11 bud

    I'm in need of assistance to set up a c...storage space on the camera's memory card. - Adjust the frame composition to capture the event effectively. - Adjust the lighting to ensure the subject is well-lit. - Conduct a dry run before the event to troubleshoot potential issues. Skills Needed: - Familiarity with various types of cameras (DSLR, mirrorless, camcorder) - Proficiency in audio equipment and connections (3.5mm jack, XLR input, USB input) - Experience with both wired and wireless connections, including Bluetooth Ideal Candidate: - Able to work with any type of camera or audio input the client has - Comfortable with any type of connection for sound - Able to troubleshoot and adapt to different equipment as necessary The event duration is less than 1 hour. The ev...

    €14 Average bid
    €14 Gns Bud
    11 bud

    I'm looking for a product manufacturer who can design a 3D model image of a realistic wolf with interchangeable glow in the dark eyes of 5 colors. This model will be used on a backpack with my logo and name. The backpack features a dual USB port and follows my tech pattern design. Details: - The glow in the dark eyes should be made of resin. - The 3 color backpacks are white, black, and grey. - I'm considering a production of either 100 of each color or 50 of each, depending on costs, shipping, and handling. Requirements: - Willingness to sign a Non-Disclosure Agreement (NDA). - Experience in product manufacturing and 3D model design. - Ability to provide a detailed quote including production costs, shipping and handling with insurance. - Credentials, geograp...

    €1612 Average bid
    €1612 Gns Bud
    24 bud

    I need an Arduino project that involves LED lights shaped as a moon and stars. The lights should turn on at specific times that is 7th day, of every month stay solid once they’re on and not perform any other functions. Key Requirements: - The lights should turn on at specific times every day. - The lights should stay solid once they're on. - The lights should not perform any additional functions (e.g. changing brightness, blinking, etc.) Ideal Skills: - Proficiency in Arduino programming. - Experience with LED light projects. - Ability to set up a fixed schedule for the lights. The goal is to have a starry night sky in wedding frame , and I would like the project to be simple and to the point.

    €22 Average bid
    €22 Gns Bud
    13 bud

    ...adjustable clamp. ✔ Smart Chai Detection – Equipped with stainless steel chai sensors (probes) that detect the liquid level. ✔ Automatic Airflow Control – When chai reaches the probes, ChaiGuard activates a fan to cool the brew and prevent overflow. ✔ Buzzer Alert – If the chai rises too high, the buzzer alerts the user immediately. ✔ Rechargeable Battery – Powered by a 3.7V Li-ion battery with a USB charging port for easy recharging. ✔ On/Off Button – Allows the user to control the device as needed. --------------------------------------------------------------------------------------------------------------------- What We Need from You: ==> We are looking for a redesigned, professional, and aesthetically appealing version of ChaiGuard that is re...

    €289 Average bid
    €289
    33 indlæg

    I require an experienced embedded C/C++ programmer to assist with my project which is using the CH32F103C8T6/CH32X033F8P6 MCU. The project involves working with either Zephy...I am facing are compilation errors, runtime error. The work won't take much time as the code has already been generated by LLM only error correction is needed. Key Requirements: - Extensive experience in embedded C/C++ - Proficiency in either Zephyr or RT-Thread RTOS - Ability to troubleshoot and fix AI-generated code - Experience with the CH32F103C8T6 MCU Please note that mere knowledge of Arduino is not sufficient for this task. Your role will primarily involve code testing and completion, so a keen eye for detail and strong debugging skills are essential. The freelancer needs to complete the project...

    €11 Average bid
    €11 Gns Bud
    11 bud

    I need an Android application designed for USB OTG connectivity. The purpose of this app is to serve as a comprehensive dealer/installer toolkit for a custom boat lift controller. Project Overview I have a custom Boat Lift Controller (Arduino/AVR-based) that communicates over USB-to-serial. I need an Android app (for phone/tablet with OTG) to serve as a Dealer/Installer Toolkit, providing: Full configuration (all settings, e.g., limit switches, motors, etc.) Setup Wizard (mandatory) with GUI screens guiding through each step of device setup. Control (move the lift up/down, set presets, toggle AUX lines, etc.) Monitoring (real-time serial terminal for manual commands, logs, etc.). Firmware Updates over USB for both the main controller and a sidekick microcontr...

    €1249 Average bid
    NDA
    €1249 Gns Bud
    40 bud

    ...Control of dynamometer settings - Real-time calculation of horsepower (HP) using a supplied equation The ideal candidate for this project should have extensive experience in app development, particularly for Arduino-based systems. A strong understanding of engine dyno operations and data interpretation will be advantageous. Given the nature of this project, proficiency in real-time data processing and cross-platform app development is crucial. Arduino Dyno APP Project. The objective of this project is to create a App, capable of reading and displaying the output of all the Arduino Dyno hardware sensors. Also display HP based on HP = Torque X RPM/5252 (Torque=weight). The APP layout should be clean looking and well laid out. 1. Create realtime display 2. A star...

    €23 Average bid
    €23 Gns Bud
    11 bud

    I'm looking for a skilled IoT and Bluetooth professional who can help design a remote control using nRF devices from nordic or equivalent for low power consumption to control various types audio equipment like amplifiers, preamplifiers, control equipment, equalizers. The freelancer will also design the Control unit on the Audio equipment using ESP32 (with the native IDF, NOT using Arduino) to receive the do the initial connection with the remote control and the mobile app, then maintain the connection, receive the commands from the paired devices, and send them locally to a queue. The system should be able to control various aspects of the device, including: - Volume control - Track selection - Power on/off - Menu navigation - Device selection - Input selection - Balance...

    €2356 Average bid
    €2356 Gns Bud
    58 bud