Pic18f bootloaderJobs

Searching for an embedded developer who will create a code for Zephyr RTOS which will do a firmware update over the bluetooth. On target device is Nordic Secure DFU client (Secure Bootloader) with BLE transport and we need the master which will run on another micro controller with Zephyr RTOS. The code should use standard Zephyr RTOS Bluetooth API. Image file will be stored on SD Card with FAT file system, but the code itself doesn't have to include communication with SD Card / FAT. Nordic Secure DFU protocol is described here: Here is the Android DFU Library in case it helps (the code we are looking for should have similar functionality as this library, but has to run on MCU with Zephyr

Hello guys, I am trying to set up the UART bootloader on PIC32CM MC00 Nano Curiosity Board, via Harmony v3 MCC and MPLAB X 6.00. I need someone with experience in it to help me do it step by step, for the specific controller, and PC32 generally. Thanks

Hi, your email Flaplaud at does no longer work, I had a proposition for you.

need customized rom/firmware to android - Huawei Mediapad M3 Lite 10The bootloader will be unlocked specification. - When you connect the device - Huawei Mediapad M3 Lite 10 - to power it has to boot up(start up) automatically. - When you unplug power it has to show it shut down within 60 sec, and count down and then close the device. - When it starts up, it has to show a customized picture/animation. - When it is started up I have to run one specific app. - It should not show any comand-line on the screen and run the app in full screen mode. - The volume should be set to 100% always - If the app crash it has to start up the app again. -The app have built in so it use wi-fi and you can setup wi-fi network from the app - The app uses the front camera and store image on the...

Tricore Boot BSL and GPT Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and...Bench flasher I want something like this, (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797), which is unique for these processors, can automatically recognize the processor and provide detailed information about the processor, such as information about otp addresses, write and read passwords, and information in the unlocked state of the processor, Password lock Opening Calculation Special Bootloader and Source Codes. I want people who have experience in this subject ...

...computer (SBC) ie. Raspberry Pi, a chargeable large capacity battery, buttons and touch screen. Expertise regarding the operating system (bootloader in particular), utilized by our chosen SBC for the project/s, would also be highly valued. As well as having personal hands-on experience with designing and creating similar projects. Please answer to this question (since we do not read offers that are created by automatic bots, so we ask something that has nothing to do with the business to see if the text is read by a human): is horse bigger than computer. currently the most critical things we need help with: • Raspberry pi & Libre Computer "Le Potato" bootloader adjustment to make it boot into company logo and retain logo until application lau...

We need someone capable of unlocking MI 11T Devices without going to conventional process of waiting 170 hours....total number of devices is 50 device

I need help with reading analogue signal using Sparkplug / Micronucleus bootloader

I have firmware for 7 segments display written in C, for Arduino. It displays data from the serial RS-485 or the DAC 4-20mA interface, into the 4 digits. In addition to adapting the Arduino firmware to the PIC18F, two P10 displays will be used to replace the 4-digit, 7-segment display. P10 display libraries available on the internet (validated). The hardware: > Mickroe Clicker 2 for PIC18FK > RS485 Isolator 2 Click > 4-20mA R click > 2un P10 display

Hi attached you will find the settings for the device, it is not a mobile phone, its an android for scanning and programming nfc tags only. no mobile carrier service required, but the rest of the services must work after unlocked wifi, bluetooth, nfc tag programming, upc laser scanner. would like the newest OS that can be installed f...like the newest OS that can be installed from android or and if custom rom is able to be installed. I have a pc and usb connection to device and its ready now. You must have had experience with ZEBRA TC70x devices since they are very difficult and specific methods for these devices. Please don't assume you know and test on this device and brick it. if you have ZEBRA Symbol experience unlocking bootloader only. see all info attached and message me...

I have a tablet that has custom firmware with a locked bootloader running Android 10. I would like assistance with unlocking the bootloader and loading standard Android 10 OS.

I have some hardware with an XMega32 running an application that I have written. I require the firmware to be upgradable over CANbus. I have a CAN bootloader that I believe will do what I require, I just need it integrated correctly into my existing setup and don't have time to complete it myself. I need someone with experience with bootloaders, ATXmega hardware, and microchip studio.

1. setting up a cronjob that takes a picture from webcam anytime someone enters the guest user account 2. has putty ssh client booted at all times or another ssh server and this is invisible to the user 3. setting internet to automatically connect to any available wifi, or waiting for established internet connecti...to be invisible and not noticed by user 5. using a free geolocation api to grab exact geolocation/address where laptop is currently at and sending this information automatically to same ssh server the webcam picture and geolocation can be sent at the same time 6. having a keylogger running that is automatically sending new information whenever it is entered by the thief 7. creating a custom bootloader image that displays the name of the owner, address, and phone number ...

...this is kim from korea i need a custom arduino board that has mega2560, uproading chip(ft232 or atmega16), micro-b usb connector the board size is 65mm x 70mm maximum and i need the way to uproad arduino bootloader on the board(atmega2560) and i have a pdf file that including pins arrangement and the pins use 1.25 pitch connector(ex, molex-53047) so in short mega custom board(just changing pins arrangement on the arduino mege mini pro board) board size is 65mm x 70mm maximum(less size is okay) board has 1.25mm pitch connectors 4.i need the way uproding bootloader best way is that you make gerber file and order the board and test it -but if you can't order the board just give me gerber file and i order the board and solder the board and test it thank you^^...

I am looking for experienced chap who has experience with micronucleus USB bootloader and digiCDC library. No time wasters please

Hey guys im thinking this is a impossible task. So long story short i had emui 11 on a stock Optus carrier phone. I decided to use Hiproxy and upgraded a beta version of emui 12 not realizing that google pay would not work. So i tried downgrading using hiproxy and now the phone tells me device has loaded a different operating system and im unable to fastboot due to not being able to enable the usb degging which i forgot to do.. I dont care about the data anymore but would be nice if it boots up

...to create bootloader firmware file from the kernel enviroment we just require embedded firmware linux engineer to create firmware file and some extra configurations 1st flash: (modified files) , , , , , , ,, , , , , , , , , , , , , , , , , , , , , , , , , (doesn't include bootloader) - you can only detect jtag now; Create and install bootloader: https://github

...read & debug jtag, next steam is to create bootloader firmware file from the kernel enviroment 1st flash: (modified files) , , , , , , ,, , , , , , , , , , , , , , , , , , , , , , , , , (doesn't include bootloader) - you can only detect jtag now; Create and install bootloader:

(1) SERIAL BOOTLOADER for PIC32MZ0512EFE064 (hex file + MPLAB X IDE PROJECT provided) : - UART 1 (PIN 56 / 57) - ENTER IN BOOTLOADER MODE WITH LONG PUSH ON RF5 WHEN THE HADWARE POWERUP (RF5 active low)  for information : the electrical hardware system start with the button, it's an button for an electrical powerup and in the same time give the state of RF5 (when active state low). - Provide hex file + MPLAB X IDE PROJECT + harmony if necessary (2) BOOTLOADER HOST APPLICATION (native file, project provided) : - Windows command line application (minimum) or visual basic, or C#, or java, or C++ - option area for a picture or logo integrated to the BOOTLOADER HOST APPLICATION - Provide native source project and application in object format ********** PIC32...

Task is to create a demo of a bootloader system for Arduino Mega 2560. Its mainly a execution of the "MMC_SD Bootloader für AT Mega – " link. Attached you will find and Blink2.ino. These files should be able to install by SD card. Please check attachements and Blink2.ino. If you dont have Arduino Mega2560, please let me know, we can ship one to you. How the task will be tested: 1. Connect to Arduino Mega 2560 by USB 2. Upload your bootloader to Mega2560 by using Arduino IDE (or what you recommend) 3. Upload to Mega2560 by using Arduino IDE (or what your recommend) 4. Copy to SD card (or as Hex file if needed, it will called *.ino for better understanding in test) 5. Plug SD card into Mega2560 6. Reboot Mega2560 > it will

The project consist to build OTA firmware on MPLab to work on my own board based on WIFI32E01 chip. The application must try to connect with the defined server address and d...consist to build OTA firmware on MPLab to work on my own board based on WIFI32E01 chip. The application must try to connect with the defined server address and download the new image. The downloaded image must be stored in the external flash (Winbond W25Q16JVZPIQ) initially. Application must reset the device to run new image once image is successfully downloaded from server. When device is reset ,bootloader must try to program the image from the external flash and if programming is successful ,downloaded image from the server must be executed . This code must be merge with MPLab code already code in the G...

I want a boot2Gecko bootloader for a JavaScript emulator running Linux() for android Oreo for a google glass app that need video selection & playback, google hangout api, video recording, audio recording, video/audio recording, JavaScript data storage, and server uploads.

project firmware alterations below 1. convert nand to emmc, config api, arch, board, common, disk, doc, drivers, dts, fs, lib, 2. secondary bootloader boot0 should be eMMC varient which loads uboot from eMMC 3. importantly the steps to pull in the locally compiled boot0_emmc varient into final image 4. ensure coding is compatible with imx series cameras 5. create firstly image file running uart1 6. create adjustments in source file to enable flashing firmware on phoenixsuit =================== task complete when firmware flashed on device on phoenixsuit and board is bring up

Project firmware alterations below // we will provide full source code 1. ensure boot0 is emmc on our img file 2. secondary bootloader boot0 should be eMMC varient which loads uboot from eMMC 3. importantly the steps to pull in the locally compiled boot0_emmc varient into final image 4. ensure coding is compatible with imx series cameras 5. create firstly image file running uart0 =================== adding on: 6. create 2nd image file running uart3 with src configs 7. Uboot src include/configs/sun8iw17p1.h line 284 you can change kernel boot params for default console Change console=ttyUSB3 and try if console appears in USB 8. u-boot we can but sure need inputs for uart3 changes, compile and boot0 image emmc variant ===================

project firmware alterations below // we will provide full source code 1. ensure boot0 is emmc on our img file 2. secondary bootloader boot0 should be eMMC varient which loads uboot from eMMC 3. importantly the steps to pull in the locally compiled boot0_emmc varient into final image 4. ensure coding is compatible with imx series cameras 5. create firstly image file running uart0 =================== adding on: 6. create 2nd image file running uart3 with src configs 7. Uboot src include/configs/sun8iw17p1.h line 284 you can change kernel boot params for default console Change console=ttyUSB3 and try if console appears in USB 8. u-boot we can but sure need inputs for uart3 changes, compile and boot0 image emmc variant ===================

Develop bootloader for Atmega128a

I need assistance in adding the LK source code to the Android Build process to produce a file. I the LK source already compiles I just need assistance with someone familiar with AOSP and the LK bootloader. Task - Remote into a Ubuntu server through SSH, copy the LK source into android AOSP_8 diretory, configure android .mk files, compile the bootloader to produce the This is a complicated process, with high technical expertise. please only bid on this project if you are very familiar with AOSP, kernels, and bootloaders. Thank you.

PLEASE READ BEFORE BIDDING. 1. we have all winner custom design board need to bring up 2. we have bootloader 3. we have firmware package we want to install 4. we have phoenixsuit program 5. we have board all tested and powered up for installing. REQUIREMENTS: 1. you have many years experience in pcb board bring up it's a custom design board with allwinner 2. you are linux expert in programming firmware for pcb board pls contact me for more information. Tasks: 1. to adjust boot loader to boot our pcb board 2. make adjustments to our pcb board firmware to run properly,

Hi, Im wanting a 'mini' breakout board and software designed to work with the following ATMEGA board that will run / control WS2812 LED. Breakout Board same size as NANO 3.0 board. - Connect into the pins on NAN0 3.0 board. - LED for power status. - Have a 4 or 6 pin dip switch for controlling the 'count' of WS2812 LEDS...and CH340gUSB This upgraded model is completely compatible with original Arduino UNO. Microcontroller: ATmega328P Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (of which 6 provide PWM output) Analogue Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (A...

...have secure boot and also bootloader encryption but not rootfs encryption. This is possible through customizing the u-boot to decrypt the fs although it is not built in by default. Looking for someone to build an image with encryption that i can flash to an xavier nx. Then help with instructions for enabling secure boot and testing resilience of system. Added details. This encryption and security method also needs to work with the jetson nano emmc. This will make it slightly harder as the nano can't encrypt the bootloader. Refer to this post If someone can access the key mentioned in the post the encryption can be handled by storing a encrypted version of the root fs AES key in the bootloader. So an attacker could

Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

Hi there, We manufacture a product that uses a PIC32 as its main processor. We have connected a USB socket to the correct dedicated pins on the PIC32 (D- P56 & D+ P57) and wish to be able to have end users update the program inside the PIC32 using either a USB stick OR using a cable connected to a PC running a small uploading program. (Our testing proves a PC connects to the PI32 when the USB is plugged into this socket - the usual Microsoft chime alerts us to the connection). Will discuss more with good developers. Thanks

Hi there, We manufacture a product that uses a PIC32 as its main processor. We have connected a USB socket to the correct dedicated pins on the PIC32 (D- P56 & D+ P57) and wish to be able to have end users update the program inside the PIC32 using either a USB stick OR using a cable connected to a PC running a small uploading program. (Our testing proves a PC connects to the PI32 when the USB is plugged into this socket - the usual Microsoft chime alerts us to the connection). Will discuss more with good developers. Thanks

Need help to repair efi / gpt bootloader issues. Very urgent. Continuously receiving BFSVC errors. Cannot complete the reparation process hence cannot boot

We had an employee who was working on a Bootloader and GUI for a dsPIC33EP who had now left our company. We need someone who can finish this project off. Do you have any experience with dsPIC33EP devices and booloaders? I am happy to setup a Teams call to discuss the project, timescales and rates. Regards Graham

We had an employee who was working on a Bootloader and GUI for a dsPIC33EP who had now left our company. We need someone who can finish this project off. Do you have any experience with dsPIC33EP devices and booloaders? I am happy to setup a Teams call to discuss the project, timescales and rates. Regards Graham

We are having problems for do a bootloading in the STM32l151rbt6a microcontroller. We need help to solve this problem.

An advanced toy racing car PCB is controlled wirelessly using Nordic nRF52832 See attached project description.

For the processors below, I want to have a bootloader that performs operations such as reading and writing memory addresses and reading passwords and other necessary actions. (TC1762/1766/1792/1796) (TC1724/1728/1767/1782/1784/1797)

My application is to program my own design PCB where I have a controller microchip WIFI32E01 and a communication module HUM-A-900-PRO (Linx). The program must do : When the system is activated (main switch) and after init...received. When the system receives a command to close, the barrier will fold back and the red light will remain on for 3 seconds. Subsequently, the red light will go out and the yellow light will begin to flash until a command to open the barrier is received. See SFMdiagram for the exact sequence. The program must : 1 - Control light and motor as describe 2 - have the capability to program bootloader OTA 3 - have 2 possible inputs : via UART1 from module Linx or with physical switch. If we go forward with the project, I can send my board schematic and my...

The task consist to create a bootloader for the SAMD21E17A Microcontroller based on the Microsoft/Adafruit UF2 Bootloader. It needs to be compatible with Arduino for uploading the code, customer requirement. The bootloader has been compiled, however there is no way to communicate with Arduino IDE. Variants were based on TAU and Trinket m0, no luck. It will be probably an easy fix, but I am stuck with it. Looks like some linker script or BOSSA configuration is wrong. I will share my code with you if you need it. Required skills/equipment: - linux/unix environment - C language - Development board with SAMD21E18 or E17 (not a must)

skills. Bootloader, Board Bringup with 8/16bit microcontroller CAN/MilCAN, I2C, RS485 Protocols Language: Embedded C Job Description 2 to 4 years of experience in Automotive Embedded SW development. Skills: • Experience in C / Embedded C / C++ programming/Assembly PRogramming • Good Experience in RTOS concepts FREE RTOS, TI RTOS, etc • Knowledge in Linux OS customization, Linux Kernel & device driver's development • Strong knowledge of Software development life cycle. • Experience in Embedded Development tools chains (Compiler, debugger etc..) • Hands-on experience in the capabilities of the application and how to drive the data into it and get the solutions • Strong knowledge of 16/32 bit Micro Controllers, RTOS, communication pro...

We need to write the bootloader firmware. We have a board an Atmega324PB chip and is connected via a NimbeLink QBG95B. fist stage simple bootloader program working expecation: 1. Check if a new update is available, eprom flag? 2. If eprom flag = true, then reprogram the application flash section with new hex 3. if eprom flag = false., then change program execution to application memory start 4. after flash reprogram, change program execution to start things to figure out... how to make the application restart into the bootlaoder to perform the check... things to figure.... how to download hex file, where does that code live... bootloader or application? things to figure... how to validate download, so to guarantee the application hex is always good... so not to brick...

Continuing the work on the board, a few more features will need to be developed. -getting all the modules/sensors up and running, (buzzer, led multiplex, accelerometor, gyro, haptic motor) -MSC features added to the program (ability to move and copy files in program code) -Low power mode (sleeping, hybernation) -failsafe mode (watch dog timer reset if device hangs) -verification algorithm to verify a is authentic (checksum? keycode? etc) -various minor firmware functions to assist with ongoing general program development. -factory reset mode (this may not be necessary) (test application that wipes and resets the flash memory) -self test program, (a hex that can be sent to the manufacturer to test all the board features and determine failure preemptively, (power, battery, motors, accelero...

Hi, I am building a project using SAMD21 J17 Microcontroller, but i am unable to make it work in Arduino ide I have previously been successful in modifying the standard Arduino zero bootloader(samd21g18) into a custom bootloader for SAMD21 J18 , but am not able to do the same for J17.

simple modifications to a Custom ROM. ROM is open sourced. -change bootloader animation -change Lockscreen -Change Wallpapaer thats it

We are developing a consumer device that provides an output signed with an asymetric encryption algorithm, using as little power as possible as the device will be solar-powered. The minimum standard security measures to implement are hardware-based isolation and root of trust, as well as secure boot, bootloader and storage. The asymetric key pair must be shielded from any user short of well-funded state attackers.

...first accepted bootload update from Hewlett Packard (my machine is HP Z workstation). My keyboard (tilda, ctrl, alt) started acting up and couldn't type Korean. Recently I added VMware for a testbed platform I am learning from Udemy. Now my gnome-terminal couldn't be started. In short, I noticed some issues as follows; apt_pkg, no module named apt-add-repository not working Freezing after bootloader Is there any way to reinstall (no format) as explained here , which should be taken as an example as I am not sure if their suggestion would help me to achieve restoring my old system. my budget: usd 30 your task: to restore my old system by fixing issues i have; documentation of your progress To create a backup on sda5

...first accepted bootload update from Hewlett Packard (my machine is HP Z workstation). My keyboard (tilda, ctrl, alt) started acting up and couldn't type Korean. Recently I added VMware for a testbed platform I am learning from Udemy. Now my gnome-terminal couldn't be started. In short, I noticed some issues as follows; apt_pkg, no module named apt-add-repository not working Freezing after bootloader Is there any way to reinstall (no format) as explained here , which should be taken as an example as I am not sure if their suggestion would help me to achieve restoring my old system. my budget: usd 30 your task: to restore my old system by fixing issues i have; documentation of your progress To create a backup on sda5

...first accepted bootload update from Hewlett Packard (my machine is HP Z workstation). My keyboard (tilda, ctrl, alt) started acting up and couldn't type Korean. Recently I added VMware for a testbed platform I am learning from Udemy. Now my gnome-terminal couldn't be started. In short, I noticed some issues as follows; apt_pkg, no module named apt-add-repository not working Freezing after bootloader Is there any way to reinstall (no format) as explained here , which should be taken as an example as I am not sure if their suggestion would help me to achieve restoring my old system. my budget: usd 30 your task: to restore my old system by fixing issues i have; documentation of your progress To create a backup on sda5