Battery resistance microcontrollerJobs
Development of single-phase dq control for AC modules, including parallelization and droop control for parallelizing DC modules and AC modules. Creation of a simulation model in PLECS to verify and optimize the control system. Note: The control algorithm must be clean and well-structured. It will later be converted into C code for use on a microcontroller. The conversion to C code is not part of this project. The attachments are only examples. Required Skills: - Proficiency in control systems design, particularly dq control and droop control. - Experience with PLECS
I'm seeking a seasoned PCB designer to assist in creating a custom, compact PCB for an IoT project focused on sensor integration. The PCB will need to accommodate several components, including an ESP32-WROOM-32 microcontroller, SIM card module, SD card module, and RS485 transceiver. Key Requirements: - Expertise in PCB design, specifically for IoT applications. - Experience integrating multiple components onto a single PCB. - Ability to design a compact-sized PCB without compromising functionality. - Familiarity with the ESP32-WROOM-32 microcontroller and other specified modules. Ideal Skills: - Proficiency in PCB design software. - Strong understanding of sensor integration and IoT systems. - Excellent problem-solving skills to overcome design challenges. - Attention ...
...to assist in crafting a compact and efficient IoT device tailored for health monitoring. The device will interface with VOC sensors (PS1 & PS4-VOC-10-MOD) and employ an ESP32 or a similar microcontroller for wireless communication, as well as executing on-device AI models. Key Requirements: - The design needs to prioritize low power consumption, making it suitable for wearable or portable use. - A primary focus of this device will be monitoring human breath, so expertise in integrating and utilizing VOC sensors is crucial. - Long battery life is of utmost importance, far more than a rechargeable battery or energy harvesting capabilities. Ideal Skills: - Extensive experience in PCB design, particularly using KiCad. - Proven track record in designing compact, lo...
I'm in need of an experienced embedded systems developer to help troubleshoot and debug some code running on a TI CC1352P micro-controller. The debugger will need to ha...micro-controller. The debugger will need to have a strong background in C/C++ and familiarity with TI Code Composer Studio. Given the complexity of the project, I'm looking for someone based in Ontario, Canada, who can potentially offer in-person assistance if necessary. Ideal Skills and Experience: - Proficient in C/C++ - Extensive experience with TI Code Composer Studio - Familiarity with TI CC1352P microcontroller - Embedded systems development background - knowledge of OpenThread Protocol - wireless thermostats (based on TI CC1352P micro-controller) creating Mesh Network (OpenThread Protocol) - Base...
I'm looking for a skilled PCB designer to create a design for a smart LPG meter. This device needs to have several key functionalities, including gas level monitoring...This device needs to have several key functionalities, including gas level monitoring, leak detection, and usage data logging. The smart LPG meter will connect via Wi-Fi and will be powered by a battery. Key Requirements: - Design a PCB that incorporates gas level monitoring, leak detection and usage data logging. - Ensure the design is suitable for a battery-powered device. - Include a Wi-Fi connectivity component in the design. Ideal Freelancer Skills: - Extensive experience in PCB design. - Knowledge of IoT device requirements. - Understanding of gas sensing technologies. - Experience with battery...
I'm looking for a professional 3D designer who can create a moderately detailed 3D rendered model of my drone for prototype development. The model should showcase the full drone, including all components such as the propellers, camera/gimbal, and battery compartment. Ideal Skills: - Proficient in 3D modeling software - Experience in designing for prototype development - Ability to create detailed and accurate models Experience: - Prior work with drone models highly preferred - Portfolio demonstrating high-quality 3D rendered models - Proven track record of meeting project deadlines
I'm looking for an expert in PCB design to create a 50x50mm PCB board featuring a STM32H750, 16 bit RAM, and a 24 bit RGB TFT connector. This board will be used in an industrial control application, so its design needs to support real-time processing capabilities. Key aspects of the project: - Design a compact PCB within a 50x50mm area. - Integrate a STM32H750 microcontroller, 16 bit RAM and a 24 bit RGB TFT connector. - Ensure the PCB supports real-time processing. I will provide all the necessary specifications and details for the components. The ideal candidate for this project will have a strong background in PCB design for industrial applications and is adept at designing for real-time processing.
I'm looking for an engineer with experience in microcontrollers or Arduino to build a timer for an educational project. This timer should have the following functionalities: - Countdown Timer - Interval Timer The timer should use a Seven-segment display. Ideal candidates for this project should have a strong background in electronics and programming, particularly with Arduino or similar microcontrollers. Experience with building educational tools or projects will be a plus.
I'm having trouble with my keyestudio DIY solar tracking electronic kit. I'm specifically facing an issue with the microcontroller, where I'm getting the error: "avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x67". I need an expert who can help me troubleshoot this issue. The ideal candidate should be experienced in dealing with similar kits and microcontroller issues, preferably with keyestudio products. I would appreciate a step-by-step interactive guide to understand the troubleshooting process. Skills required: - Electronics expertise - Experience with keyestudio kits - Microcontroller troubleshooting - Ability to create step-by-step interactive guides.
Project Description: We are looking for an expert freelancer to develop a custom watch capable of receiving messages from an online platform and displaying them in tuple format. The watch should cycle through messages one at a time when a button is pressed. The microcontroller does not need to be embedded in the watch; it can remain external, with the watch functioning as the display unit. Features and Requirements: Message Format: The watch will receive a list of tuples (e.g., [(11, "A"), (12, "B")]) from an online platform via Bluetooth. The watch should store these messages locally. Watch Display: The watch should display one tuple (e.g., 11: A) at a time. On each button press, the display should cycle to the next tuple. After the last tuple, it should loop...
...telephone app when it is bedtime -the app has the option to start a meditation playlist if you need to get relaxed before going to bed, you need to be able to choose a playlist. If the user has a smart watch the heart rate is monitored and if it is still high before sleeping the app can recommend specific meditation -custom product: smart sleep earplugs Design for connecting earplugs and seeing battery percentage and connection status -reschedule user bed time and on the bed time alert there is the option to extend all actions by half an hour each time. When the user sleeps later or sleeps bad there is the option since we have the user's calendar that the user can select that the app automatically delays the wake up time so the user keeps having a minimum of 8 hours of sl...
I need a MATLAB program that receiving the constant numbers Lr, Ls, Rs, Lm, sigma related to a given motor and the desired range of rotor resistance Rr, selects the best K and indicates the changes in the range Rr and K on the graph and the convergence is clear in it. K is the system feedback, which is predicted in a robust control. Simulink can also be used. The Hanso MATHLAB program, which is in the attachment, can be used for help. Full program description and diagrams are required. Key tasks: - Develop a MATLAB program to solve various equations of state - Implement vector control for motor drives Ideal skills and experience: - Proficient in MATLAB programming - Strong background in Electrical Control Systems - Experience with motor drives and vector control systems - Knowled...
I'm looking for a solution to monitor an entire iPhone for parental control purposes. This includes monitoring all app usage, battery, and network activity. Key Requirements: - Monitor all apps: including screen time per app, number of app launches, and data usage per app. - Monitor entire phone: including battery usage and network activity. Ideal Skills: - Experience with iPhone monitoring software. - Understanding of parental control needs. - Ability to provide comprehensive usage analytics.
Looking for an individual or small team near Minneapolis. This project involves a lot of moving parts so I would like to meet face to face on occasion. I'm looking to develop a battery pack, more info in the attached doc. Whoever takes this on needs to have experience in electronics design and mechanical engineering. Able to design in AutoCAD, prototypes on a 3D printer. For fabrication we would likely go to a mold shop. Collaboration with the mold shop might also be needed to get the prototype right. Up to the prototype this is likely to be around a $20k project. Looking to start within the next week or two.
Our medical testing device, powered by an ATmega 1284P microcontroller and using CodeVision, is experiencing a troubling intermittent issue. The LCD screen fails to display the vital label tag "L" for patient identification. This issue is critical as it disrupts the process of associating test results with the correct patient, leading to potential errors. The label generation process is the primary area of concern, as the screen is functioning properly with other labels. We are in need of a skilled freelancer who can: - Diagnose the root cause of this issue. - Implement a reliable fix to prevent future occurrences. Ideal candidates should have: - Extensive experience with microcontroller code, specifically ATmega 1284P. - Proficient skills in troubleshooting and r...
I'm working on an E-commerce website for a phone and battery repair store and need a talented web designer to beautify my HTML document. Your task will be to add colors and images, making the site visually appealing and user-friendly. Must have Lucid chart to be able to view my wireframes, or you could make your own with a screenshot of mine. The website includes 5 pages. Ideal Skills: - Proficiency in HTML - Experience in web design, particularly for E-commerce sites - Understanding of color theory and design aesthetics - Ability to source and integrate relevant images Please bring your creativity to the table, as I trust your judgment on what will be pleasing to the eye and ultimately enhance the user experience.
...user experience. - Collaborate with Laravel developers to ensure seamless backend integration. - Analyze and resolve issues to maintain a stable and reliable app. **What We’re Looking For:** - At least 2 years of experience in Flutter development. - Proven track record of building and optimizing Flutter apps. - Knowledge of app performance best practices, including animations and battery usage. - Strong communication skills and experience working in a team. - Experience with Laravel integration is a plus but not mandatory. **What We Offer:** - Flexible work options: remote or on-site in Nigeria (Abuja/Ibadan). - A challenging project with room for your creative input. - Competitive compensation. - The opportunity to be part of a dynamic team with...
I'm in need of an electrical wiring diagram for a residential portable cabin that operates on solar power. This diagram should incorporate the following components: - Solar panel system - Battery storage - Inverter It should be designed to support a solar power setup, and it might be beneficial to have knowledge of sustainable energy practices. The ideal freelancer for this project would ideally have experience with residential electrical systems, solar energy, and creating wiring diagrams. Please provide me with a detailed plan on how you would approach this project.
...small aircraft. It is based on an Arduino and the concept is fairly simple. I have a 3-pole toggle switch with the following functionality 1. System is off- no power to the relay 2. System is Armed - in this case the smoke pump will be turned on with a double click on the momentary stick button and off with a single click 3. System is manually on- the smoke pump is on. Power is from the aircraft battery (14.4V), and I have a voltage converter to 7V for the Arduino circuit and 14V for the relay power to the pump. I have the system working on a breadboard, but it has an issue - as soon as the load is activated, it seems that the power to the Arduino is interrupted and it resets itself. The solution is probably quite simple (maybe a capacitor sized correctly) I need someone to w...
I'm looking for a professional with experience in IoT development and CCS protocol to integrate a battery charger with firmware update capability over the air (OTA). The project involves: - Implementing IoT features for control, monitoring and firmware updates of the battery charger. - Ensuring robust authentication measures for secure OTA firmware updates. - Enabling comprehensive data monitoring including battery health status, charging progress, energy consumption, voltage, current and temperature measurements. The ideal candidate should have a strong background in IoT, firmware development, and battery charger systems. Previous work with CCS protocol and implementing security measures for firmware updates will be highly beneficial.
I need help with two circuit analysis problems regarding DC circuits, as shown in the provided figures. Tasks: 1. For the first circuit (FIGURE 1): - Calculate the value of the current through a given 11 V battery. - Calculate the power dissipated in three specific resistors (R1, R2 and R4). 2. For the second circuit (FIGURE 2): - Determine the current (i) flowing in a 30 Ω load using two different methods: a) Thévenin’s theorem b) The superposition theorem - Calculate the values of three inductors present in the circuit. - Calculate the complex form of the voltage across the load using any method. Requirements: - I need the answers typed in a word document file. - Detailed step-by-step solutions are required for each calculation. - U...
...mhz networks must be compatible standart SIM There must be a Bluetooth connection with the application.(IOS ve Android) Signal strength and battery charge status should be visible via Bluetooth The settings of the device can be made with this connection. Must be a unique 4-digit BL connection number for each device with app: 1. The angle of the tilt sensor should be adjustable 2. The phone number to call must be set 3. It should be stated how many times and how many minutes apart the alarm call will be made. It should be an easily replaceable Li-ion battery. It should be able to stay in stand-by mode for at least 1 month with this battery. The battery can be charged via Type-C connection The prototype circuit will be provided for testing. Before approval, ...
I need a CFD simulation expert to model a battery pack using the MSMD model, focusing specifically on thermal management through a phase change material cooling system. Key Requirements: - CFD Simulation experience, particularly with battery packs. - Proficiency with the MSMD model. - Understanding of thermal management strategies. - Experience with designing cooling systems using heat pipes. - Knowledge of phase change materials and their application in cooling systems. Your task will be to assess the cooling system's design and optimize it for effective thermal management.
I'm in need of a car prototype incorporate important aspects related to the chassis, motor, and battery within the interior layout. Ideal Skills and Experience: - Expertise in automotive design and engineering - Experience in prototype development - Strong understanding of exterior design and aesthetics - Knowledgeable about chassis, motor, and battery integration - Ability to create prototypes for design showcases
Need to implement 4 motorized faders using Atmega 328P to existing esp32 project. I'm looking for a professional skilled in embedded systems and motor controls. The task is to implement 4 motorized faders in an existing ESP32 project, using an Atmega 328P microcontroller. Key Requirements: - The motorized faders will primarily be used for audio mixing, so previous experience with audio-related projects could be beneficial. - The faders need to be synchronized with software, so proficiency in software integration is necessary. Ideal Skills: - Extensive knowledge of Atmega 328P and ESP32 - Experience with motorized faders - Proficiency in software integration - Background in audio mixing hardware would be a plus.
I'm seeking a skilled engineer to design and ...under-voltage trip, and over-current trip settings - Include resume and trip time delay timers The user interface will be simple and intuitive, utilizing push buttons for all settings. The system will feature four seven-segment displays, scrolling each ADC value one by one, with multiplexed segment LEDs for status updates. Ideal candidates should have: - Extensive experience with STM8S003 microcontroller - Proficiency in designing control systems - Familiarity with ADCs and LED multiplexing - Ability to create user-friendly interfaces Skills in programming and electronics are crucial for this project. Status updates could include: increasing, decreasing, trip, over-voltage, under-voltage, over-current, and mains on, toggling u...
My car's negative battery cable has snapped at the grounding connection. I need a skilled freelancer to assist with this. The job involves crimping two ring terminals onto the broken ends of the cable so that I can bolt them together at the grounding point. The car is currently located on street parking and I'm in need of a professional who can bring the necessary tools and materials for this repair. Key Requirements: - Experience in crimping ring terminals - Ability to work in a street parking setting - Provision of necessary tools and materials for the repair. PLEASE SEE ATTACHED PICTURE of what the finished job should look like.
I'm in need of a sophisticated Battery Management System (BMS) for my Lithium battery packs, specifically 7s and 10s configurations. Key Requirements: - The BMS needs to manage the simultaneous charging and discharging of the battery packs, or prevents charging and discharging between battery packs. The re-used battery packs already have their 10s or 7s BMS. - Communication protocols are to be discussed, so flexibility and expertise in various systems is a plus. - Additional features required include: - Temperature monitoring - State of Charge (SoC) estimation - Fault detection and notification Ideal skills and experience for this job include a strong background in BMS development, extensive knowledge of Lithium battery technology...
I'm looking for a professional with experience in long wave RFID programming for a special project. The task involves developing a selection gate for horses tha...for the range of transponder recognition and the opening times. The RFID gate will be used primarily in an outdoor paddock. Thus, the RFID hardware must meet heavy-duty and weatherproof standards. Additional features required for the gate include: - A battery backup system. - Provisions for remote monitoring. Ideal candidates for this project should have: - Proficiency in long wave RFID programming. - Experience with creating hardware for outdoor use. - Ability to design with CE compliance in mind. - Skills in integrating features like battery backup and remote monitoring. - Ideally, fluency in German to fac...
I'm seeking a professional with expertise in microcontroller boards to assist in the bring-up process of my hardware. STM32H743 running a open source OS
I'm seeking an expert in thermal analysis and materials science to help with a comprehensive project. 1. Thermal Gradient Analysis: - The main focus will be on quantifying thermal gradients within individual Li-ion cells and across modules in extremely low winter conditions. - You will need to assess the impact of these gradients on the lifespan of the battery, as this is my primary concern. 2. Material and Design Optimization: - I want you to explore advanced thermal interface materials (TIMs) and innovative module designs to minimize the thermal gradients. - This includes investigating novel materials with better thermal conductivity that can still be compatible with existing Li-ion technologies. 3. Thermal Management Strategies: - The development of ta...
I'm looking for an electronic engineer to design a circuit for a digit...Display: The display should be an LED that is visible in sunlight. It should activate when a 2%, 2.5%, or 3% grade is achieved. - Power Source: The unit should be powered by an 18v Milwaukee tools battery. - Brightest LEDs: The use of the brightest LEDs available is essential for this project. Ideal Skills and Experience: - Electronic circuit design: Proven experience in designing electronic circuits is a must. - Knowledge of LED technology: Familiarity with high-brightness LEDs and their implementation in outdoor displays. - Power management: Understanding how to efficiently use an 18v battery in a circuit. - Precision measurement devices: Previous experience working with medium precision measurem...
I'm seeking an experienced instructor to create advanced-level video tutorials on Embedded Systems. Your content should cover key topics such as Real-time operating systems (RTOS), advanced microcontroller programming, and embedded system security. The Educational Engineering Academy (EEA) is seeking experienced instructors to create high-quality video tutorials across a range of technical topics. We are hiring for multiple courses, covering Embedded Systems, Data Analytics, ARM Programming, IoT, Automotive Technologies, and Linux Administration. Overview: Payment is based on the number of final video hours delivered. Applicants must submit a sample video (Google Drive link or file upload) explaining a mid-to-advanced embedded systems topic to demonstrate teaching and recor...
Vær venlig at Tilmelde dig eller Log ind for at se detaljer.
...accelerometer and gyroscope) Controller: ESP32-S3, MAX32664 We are looking for an experienced wearable tech consultant who can: Provide strategic guidance on transitioning from prototype to production. Optimize hardware-software integration for reliable and accurate data output. Ensure sensor calibration for accuracy and power efficiency. Offer insights into durability factors like waterproofing, impact resistance, and long-term wearability. Guide quality assurance standards and best practices for scalable production. Prerequisites: Hands-on experience with MAX86174A sensors and similar hardware. Proven track record of developing wearables from prototype to market-ready product. Ability to share previous project case studies or portfolio demonstrating expertise with MAX86174A a...
I need a project focusing on the charge/discharge cycles of electrochemical batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Abil...batteries. You will be required to simulate these cycles using Simulink and perform calculations based on the project prompts. Ideal Skills: - Proficiency in Simulink - Strong understanding of electrochemical batteries, specifically charge/discharge cycles - Ability to perform complex calculations Experience: - Prior experience with modeling or simulating battery systems - Familiarity with academic or engineering projects focused on batter...
...indicator. ### Scope of Work The enhancements to the CPR indicator will include: 1. **Addition of Monthly CPR:** - Calculate and plot monthly Central Pivot Range (CPR), including Top Central (TC), Bottom Central (BC), and Pivot Point (P) levels. - Highlight these levels for easy visualization across the chart. 2. **Incorporation of Trap Zones:** - Define and visualize trap zones above resistance levels (e.g., R1, R2) and below support levels (e.g., S1, S2) based on a customizable percentage. - Use shading to clearly indicate these zones on the chart. 3. **Compatibility and Upgrades:** - Update the script to Pine Script™ version 6 for optimal performance and compatibility. - Ensure the script runs smoothly without errors or performance issues. # Deliv...
...execution. Strategies to Implement in Phase 2: 1. Buy Low Sell High Strategy Use historical data & indicators like RSI and Bollinger Bands 2. Sharegenius Swing Trading System Automate entry/exit points using MACD & moving averages 3. Paiso Ka Ped Visualize investment growth and automate reinvestment for compounding 4. Bottom Out Hunting Detect stocks at support levels using VWAP & resistance indicators 5. Nifty, Bank Nifty, Top 10 Cheapest Stocks Rank Nifty stocks by PE & PB ratios 6. BOH Filter (Sharegenius, Turtle, BLSH, SMA) Combine multiple filters into a comprehensive strategy 7. Super Breakout Stocks Identify breakouts using Bollinger Bands, ATR, & volume spikes 8. ETF Daily Earning Sheet Track ETF performance and generate ...
I'm in need of a PCB designer who can create a compact PCB for prototyping purposes. This board will need to accommodate a microcontroller, various sensors, a power supply, and Bluetooth components. Specifically, I want to gather data from a sensor (e.g. thermometer) and send that data via Bluetooth to a receiving device (iPad). The PCB will need to be powered by a 3.7 LiPo battery. I'll need all the files, so I can print at PCBWay. The board will need to be no larger than 26 mm by 30 mm. The components will need to lay flat on the board so the overall height is less than 4mm. Ideal Skills: - PCB design - Knowledge of compact design principles - Experience with prototyping PCBs Please, only apply if you have significant experience in designing PCBs, particularly ...
...Requirements: - **Type**: I need a comprehensive solution that includes Bluetooth, Wi-Fi, and NFC beacons. - **Features**: The beacons should have long battery life, wide range, and customizable messaging capabilities. They're expected to cover a broad spectrum of use cases, from retail promotions to event management and proximity marketing. - **Primary Use Case**: These beacons will be utilized across all potential scenarios. Ideal Skills and Experience: - Proven track record in sourcing high-quality advertising beacons. - Strong understanding of Bluetooth, Wi-Fi, and NFC technologies. - Experience in evaluating product features such as battery life, range, and messaging customization. - Ability to provide a comprehensive solution for various marketing needs. I ...
...is correct, and whether there is a better protocol available. My current level of knowledge has led me to conclude that BLE transmitted using the benefits of the architecture will allow for multiple incoming communications in real time to the computer (or a microcontroller connected to the computer). The initial application intention is 3 balls, each with a 9 DOF IMU (Direction of Freedom Inertial Measurement Unit), and 4 FSRs (Force Sensitive Resistors) (13 variables). My mock up so far has used the Adafruit nRF52840 microcontroller with the BNO055. I have been successful with reading values from the sensor, and with basic transmission (essentially UART with BLE). My understanding is using the capabilities of BLE architecture I will get reduced latency compared to my cu...
I’d be delighted to work on designing the 3 additional CanLiFe Battery labels, redesigning the Torque Starter and SunSaver Battery labels (once I receive the current designs), and creating the new brand labels similar to the CanLiFe Golf Cart ones. Could you please share the current designs and any specific requirements or preferences you have for the new labels? This will help me ensure the designs align perfectly with your vision. Looking forward to your reply and ready to get started!
...(Not Required but Nice to Have): 6. Battery Optimization Software: • When the tablet detects the charging cable is unplugged: • Automatically dim the screen to the minimum brightness. • Disable LTE connectivity. • When the cable is reconnected, the tablet should restore its previous settings. Technical Details: • The application will run on Lenovo Tab M10 tablets. • It should have an intuitive and user-friendly interface for taxi passengers. • It must operate seamlessly in a taxi environment, considering limited supervision. Deliverables: • A fully functional application with the described features. • Clear documentation for setup and operation. • Remote management capabilities for ads and quizzes. • (Optional) ...
I'm looking for a developer to upgrade an open-source React financial charts framework () to include some advanced charting functionalities similar to those found on TradingView.com. The task involves: - Drawing specific additional lines on the financial charts, such as trend lines, support and resistance lines, and Fibonacci retracements. - Implementing advanced chart drawing tools referring to TradingView, specifically multiple types of trend lines, custom shapes and annotations, and technical indicators like Bollinger Bands. - Upgrading the current capabilities of the charting tool to be on par with TradingView. The wanted specifications and Job domain depend on an attached spefication document. The ideal
Description: We are looking for a creative and detail-oriented 3D designer to develop a durable, aesthetically pleasing case for an electronic device featuring an e-paper display. The design must ensure easy assembly, support both vertical and horizontal stacking mechanisms, and be optimized for 3D printing. Responsibilities: - Design a compact, lightweight enclosure for the Lilygo T5 2.13 and its battery. - Incorporate functional openings for USB ports and power switches. - Develop a mechanism for securely stacking up to three devices vertically and horizontally. - Ensure the case is optimized for 3D printing, using software like Fusion 360. - Ensure the case is durable, easy to assemble, and aesthetically pleasing. Ideal Candidate: The ideal candidate will submit a proposal inc...
Arduino Microcontroller Code for Multi-Floor Lift/Elevator System We are seeking an experienced Arduino developer with prior expertise in designing and implementing multi-floor lift/elevator systems for commercial or professional applications. The ideal candidate should have a **ready-to-use, tested, and proven program** suitable for deployment. Requirements: - Working Code: Must have a functional Arduino program for a multi-floor elevator/lift system. - Experience: Preference will be given to candidates with prior implementation in professional or commercial projects. - Urgency: Immediate availability and readiness to provide the solution on an urgent basis. - Documentation: Clear documentation of the program, including setup and configuration. - Hardware Knowledge: Familiarity w...
I am looking for someone who can hel...figure it out- likely trying to overthink it. I have an engineering degree, but it's in a very different field, although I wish I would a have considered this field instead as it seems a lot more fun! The parts I have are: 1. Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz (STEMMA QT / Qwiic) [ID:2590] 2. Adafruit DRV2605L Haptic Motor Controller - STEMMA QT 3. Lithium Ion Polymer Battery - 3.7v 1200mAh 4. PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA 5. RFID-RC522 I need 1. A diagram connecting the parts - I am using a bread board 2. Coding that would allow the use of the RFID tag to operate the motor. 3. Instructions on how to load it to the metro mini. I know nothing (clearly) about this stuff but want ...
Vær venlig at Tilmelde dig eller Log ind for at se detaljer.
... EPS, or SIP. - Everything except for furniture to be 'turnkey'. - Emphasis on durable (50+ years), yet sustainable materials. - A modular design with an option to build two dwelling units at a time. - High fire resistance and good insulation. - Prefab, but not based on containers. Deliverables: - Architectural plans - Civil plans - Bidding documents stating intentions, expectations, conditions and BoM - Proposed project plan with Gantt chart in MS Project and WBS in MindManager - Proposed contract conditions for general contractor - Electrical plans including PV solar and battery plans - Fire Protection plans - Interiors plans (kitchen, staircase drawers, built-in cabinets) - Landscape plans (front and backyard) - Mechanical plans (HVAC) - Plumbing plans - Equi...
