Arduino x10 switchJobs
...unable to update firmware remotely, the OTA process is not reliable and the encrypted firmware updates are failing. - **ESP32 Background Information:** I'm using an ESP32 Development board for this project. The application running on this hardware was developed using Arduino. - **Necessary Skills Most Needed:** A freelancer with advanced knowledge of ESP32 and an understanding of the OTA process including familiarity with encrypted firmware updates will be best suited to tackle this issue. Proficiency in Arduino is also necessary. Given that this project deals with the inability to update firmware remotely, familiarity with networking would be an added advantage. Connecting to XXX W (84) wifi: wifi nvs_open fail ret=4353 E (84) wifi: wifi_init 1410 ret=...
skal bruge færdigt projekt til: wifi data. sende en e-mail når en knap aktiveres der skal tilkobles 2 knapper der skal send forskellige beskeder der skal bruges dns da ip ændre sig skal kunne modtag data til at tænde led skal kunne gemme data hvis forbindelse svigter og sende når der er forbindelse igen
*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in ...
I'm looking for a skilled coder who can write a working code for Arduino. The project involves the ESP8266 and Waveshare 2.13inch E-Ink Screen Display HAT (B) for Raspberry Pi. Key Requirements: - The primary function of this project is to show images on the E-Ink screen. The images will be in 212x104 resolution, but the code should also be adaptable for 2.97 inch and 4.7 inch screens. - The code must support all three resolutions: 2.13, 2.97, and 4.7 inches. - You will need to provide schematics of wiring for the ESP8266 with the E-Ink screen. - Ideal candidates should have experience with Arduino, ESP8266, and E-Ink displays. Skills in coding for multiple screen resolutions and creating wiring schematics are essential.
...electrical connections and circuitry. - LED Outdoor Lighting: - Lighting Details: Show the design and placement of the LED outdoor lighting within the groove of the indented kick plate. - Wiring Holes: Include the placement of holes for wiring to enter for the lighting, ensuring a seamless look. - Power Supply: - Power Plan: Include details of the power supply system, including conduit layouts, switch locations, and specifications for electrical components. 7. Metalwork - Precise Metal Work: - Fabrication Drawings**: Provide detailed shop drawings for the metalwork, including dimensions, fabrication details, and finishes. - Assembly Details: Show how the metal components are assembled and attached to the planter and bench. - Indented Kick Plate: Include detailed fabr...
I need an Arduino project that involves LED lights shaped as a moon and stars. The lights should turn on at specific times that is 7th day, of every month stay solid once they’re on and not perform any other functions. Key Requirements: - The lights should turn on at specific times every day. - The lights should stay solid once they're on. - The lights should not perform any additional functions (e.g. changing brightness, blinking, etc.) Ideal Skills: - Proficiency in Arduino programming. - Experience with LED light projects. - Ability to set up a fixed schedule for the lights. The goal is to have a starry night sky in wedding frame , and I would like the project to be simple and to the point.
...social interaction features. Create user-friendly mobile and TV apps with senior-friendly interfaces. Build a secure, scalable backend infrastructure for streaming, data management, and user authentication. Custom Video Calling App for Videostrong KA2 Plus: Google Meet Integration: Enable high-quality video calls on TV screens via Google Meet. Seamless Auto-Answer: Automatically power on the TV and switch to the video call interface. Answer incoming calls without user interaction. Return to the previous TV show or turn off the TV post-call. Group Calling: Support for multiple participants in a single video call. Backend Features: User management, call scheduling, and remote device control. Smart Home Features: Leverage KA2 Plus AI capabilities for fitness tracking, fall detectio...
I require an experienced embedded C/C++ programmer to assist with my project which is using the CH32F103C8T6/CH32X033F8P6 MCU. The project involves working with either Zephy...I am facing are compilation errors, runtime error. The work won't take much time as the code has already been generated by LLM only error correction is needed. Key Requirements: - Extensive experience in embedded C/C++ - Proficiency in either Zephyr or RT-Thread RTOS - Ability to troubleshoot and fix AI-generated code - Experience with the CH32F103C8T6 MCU Please note that mere knowledge of Arduino is not sufficient for this task. Your role will primarily involve code testing and completion, so a keen eye for detail and strong debugging skills are essential. The freelancer needs to complete the project...
...flujo de trabajo incluye la configuración de webhooks, manejo de datos en formato JSON y llamadas a APIs (como Google Docs, OpenAI y WhatsApp Business). El objetivo es crear un sistema eficiente, claro y escalable para nuestro servicio de atención al cliente impulsado por IA. Responsabilidades: Configurar y solucionar problemas en un flujo de trabajo existente en N8N. Configurar y ajustar nodos "switch", condiciones "if" e integraciones con APIs. Garantizar que las rutas de datos JSON estén correctamente configuradas (por ejemplo, [0].changes[0].). Probar y optimizar el flujo para garantizar un funcionamiento fluido. Requisitos: Experiencia comprobada en automatización con N8N. Conocimientos sólidos de JSON e integraciones...
...workflow in N8N, integrate APIs, and optimize the flow for customer interaction. The workflow involves configuring webhooks, JSON data handling, and API calls (such as Google Docs, OpenAI, and WhatsApp Business). The aim is to create an efficient, clear, and scalable system for our AI-powered customer service. Responsibilities: Configure and troubleshoot an existing N8N workflow. Set up and refine switch nodes, if conditions, and API integrations. Ensure JSON data paths are accurately routed (e.g., [0].changes[0].). Test and optimize the flow to ensure smooth operation. Requirements: Proven experience with N8N automation. Strong knowledge of JSON and API integrations. Familiarity with services like Google Docs, OpenAI, and WhatsApp Business API. Ability to communicate
...drafts replies to incoming emails. Here is a short video where I run you through the extension: For this contest, the task is to redesign only a small part of the extension: - login screen (page on which the user can login with Google) - draft generation view (view when a gmail compose window is open and the user sees drafts being generated / can switch between drafts) - main settings page (page where the user sees what the AI has learned + is able to enter context + menu to the other pages) (I've attached screenshots for those three pages for clarity) Next steps: - please watch the video to get a sense of how the extension works. you can also install it and try it (it's all available for free) - review the three screenshots to see which pages
I need an Android application designed for USB OTG connectivity. The purpose of this app is to serve as a comprehensive dealer/installer toolkit for a custom boat lift controller. Project Overview I have a custom Boat Lift Controller (Arduino/AVR-based) that communicates over USB-to-serial. I need an Android app (for phone/tablet with OTG) to serve as a Dealer/Installer Toolkit, providing: Full configuration (all settings, e.g., limit switches, motors, etc.) Setup Wizard (mandatory) with GUI screens guiding through each step of device setup. Control (move the lift up/down, set presets, toggle AUX lines, etc.) Monitoring (real-time serial terminal for manual commands, logs, etc.). Firmware Updates over USB for both the main controller and a sidekick microcontroller board. The fina...
...Control of dynamometer settings - Real-time calculation of horsepower (HP) using a supplied equation The ideal candidate for this project should have extensive experience in app development, particularly for Arduino-based systems. A strong understanding of engine dyno operations and data interpretation will be advantageous. Given the nature of this project, proficiency in real-time data processing and cross-platform app development is crucial. Arduino Dyno APP Project. The objective of this project is to create a App, capable of reading and displaying the output of all the Arduino Dyno hardware sensors. Also display HP based on HP = Torque X RPM/5252 (Torque=weight). The APP layout should be clean looking and well laid out. 1. Create realtime display 2. A star...
I'm looking for a skilled IoT and Bluetooth professional who can help design a remote control using nRF devices from nordic or equivalent for low power consumption to control various types audio equipment like amplifiers, preamplifiers, control equipment, equalizers. The freelancer will also design the Control unit on the Audio equipment using ESP32 (with the native IDF, NOT using Arduino) to receive the do the initial connection with the remote control and the mobile app, then maintain the connection, receive the commands from the paired devices, and send them locally to a queue. The system should be able to control various aspects of the device, including: - Volume control - Track selection - Power on/off - Menu navigation - Device selection - Input selection - Balance...
I'm seeking a qualified and Australian certified electrical engineer for the design documentation of a new 4-bedroom home in Coorparoo. This is raise and build underneath project The electrical systems to be designed include a comprehensive setup for the complete home including but not limited lighting, switch board upgrade, power outlets, security system. Key Requirements: - Design documentation for all electrical systems - Collaboration with already finalized architectural plans While there are no specific energy efficiency or sustainability standards to meet, a keen understanding of current trends and technologies in the field would be beneficial. Ideal Skills and Experience: - Australian certified electrical engineer - Experience with residential electrical design - F...
...Configuration: Oversee the installation and activation of a 2 Gbps Verizon Fios Residential Plan with 5 static public IPs. Verify and configure static IP assignments to ensure proper geolocation compliance. ✅ Network Hardware & Configuration: Set up and configure a Edge Ubiquiti router 4 with traffic shaping, firewall rules, and security protocols. Integrate and optimize a 16-Port Gigabit Ethernet Switch (TP-Link TL-SG1016) for high-speed, multi-device connectivity. Configure optional VLANs for logical isolation of devices if needed for scalability. ✅ Laptop Configuration (10 Devices): Pre-configure 10 Dell Latitude 5420 laptops with Windows 10 Pro (or Windows 11 Pro). Assign static IPs to each laptop and confirm connectivity. Install and configure Multilogin, BleachBit, and ...
...AI-powered analytics to optimize user workflows and improve task execution efficiency. Background of the Invention: With the growing dependence on mobile devices, professionals and individuals increasingly rely on mobile applications to manage their daily tasks. However, existing solutions often lack comprehensive integration of task scheduling, collaboration, and performance insights. Users typically switch between multiple applications, leading to inefficiencies, data fragmentation, and reduced productivity. This invention seeks to address these challenges by providing a unified platform that combines essential productivity tools with advanced AI capabilities to streamline workflow management and decision-making. Summary of the Invention: The proposed invention is a mobile so...
I'm seeking assistance with designing ...project involves creating a modulator for the transmitter capable of encoding data using the Amplitude Shift Keying (ASK) modulation scheme. Key project components include: - The data will be sourced from an Arduino in binary form and needs to be modulated with a sine wave for transmission. - The drone will communicate its speed to a controller. - An analysis of the characteristics of both linear and non-linear amplifiers through a modulator at the transmitter end. Ideal skills for this project: - Proficient in circuit design and PCB creation. - Experience in working with Arduino and drone technology. - Knowledgeable in both linear and non-linear amplifier characteristics. Please provide a quote and specify any additional requ...
... process-black circle dot 2.openposition- blue arrow face up at the open candle loss- black triangular face down at the open of the candle profits-circle dot, position- blue arrow facing down (for red candle- in the open,for green candle- close) The algo will promote takeprofit -tp with 15 minutes until there is 15 minutes red candle and then algo will switch to promote by 5 minutes the rest of the left tp(1-6) . So the code of the algo should show the open and close of the position in 5,15,1H graphs,and show listening and promotion of tp in the 15 and 5 minutes graph only. We need to run every scenario(1-4) of the 2.2 ,on 2 years of data to see how it behaves. To check when it does not work with the conditions, st or tp or listening process.
... process-black circle dot 2.openposition- blue arrow face up at the open candle loss- black triangular face down at the open of the candle profits-circle dot, position- blue arrow facing down (for red candle- in the open,for green candle- close) The algo will promote takeprofit -tp with 15 minutes until there is 15 minutes red candle and then algo will switch to promote by 5 minutes the rest of the left tp(1-6) . So the code of the algo should show the open and close of the position in 5,15,1H graphs,and show listening and promotion of tp in the 15 and 5 minutes graph only. We need to run every scenario(1-4) of the 2.2 ,on 2 years of data to see how it behaves. To check when it does not work with the conditions, st or tp or listening process.
I'm looking for an expert to wire 5 buttons with 5 LED 7-segment counters. The buttons will be manual push buttons, and their function will be to increment the count on the LED counters. I already have the components including Arduino Uno R3 Boards that are pre-programmed with a time delay so the buttons cannot be spammed. I need to understand how the circuit works and how it is wired properly. Wires have been disconnected and it is not working at this time. Ideal Skills: - Proficient in working with 7-segment displays - Experience with wiring manual push buttons - Knowledge of basic circuit design and implementation
I'm looking for a passionate and skilled Robotics Tutor to teach my Basic Robotics Course. The ideal candidate will have experience in robotics, basic electronics, and programming, specifically with Arduino. The tutor will deliver online classes, guiding students through the course content with hands-on projects and discussions. Key Responsibilities: - Deliver engaging online classes - Guide students through course content - Facilitate hands-on projects and discussions Ideal Skills: - Experience in robotics and basic electronics - Proficient in programming with Arduino - Experience teaching beginners - Strong communication skills for online tutoring
...questions should begin with a “Texto de pregunta” field, followed by a section where users can add response options. By default, two options should be displayed, but more can be added using the “+” icon. Each option is a text field with a placeholder like “Opción 1.” The trash icon should trigger a confirmation modal before deleting the option. A toggle next to each option should allow users to switch between text and image-based options. By default, options should be text, but selecting the image option should display the option as shown in “Opción 3” of the design. When users click the “+” button, a file browser should open to allow image selection. Once an image is selected, it should be displayed with a...
...opciones son campos de texto, el texto que númera las opciones, Ej “Opción 1”, es un placeholder. El icono de papelera abre una ventana modal cómo la que se muestra en la segunda caja de la página 3, con el texto “¿Está seguro de que desea eliminar?” con dos botones. Si presiona “Si” se elimina la pregunta, si presiona “No” se cierra la ventana modal y no ocurre nada. Al costado de cada opción hay un switch que permite elegir entre texto (El icono que dice Aa) e imagen (El icono de imagen). Por defecto las opciones son agregadas cómo texto pero si el usuario selecciona imagen se pasa a mostrar cómo se muestra en la “Opción 3” del diseño. Cuando ...
Vær venlig at Tilmelde dig eller Log ind for at se detaljer.
...125 kHz) USB interface for communication with a PC (no external USB–serial chip required) This device will transmit and receive data at 125 kHz for transponders (e.g., automotive immobilizer tags) using the PCF7991 and a coil antenna. The ATmega32U4 will handle the low-level bit-banging, timing, and decoding, while appearing as a USB CDC device (virtual COM port) on the PC side. I have existing Arduino-based code (.ino) that demonstrates how to interface with the PCF7991 (originally for an ATmega328). We plan to port or adapt that code for the ATmega32U4 once the PCB is complete. Objectives Develop a Complete Schematic that includes: ATmega32U4 microcontroller with supporting components (crystal/oscillator if needed, decoupling capacitors, etc.). PCF7991 base station IC,...
...database, specifically tailored for managing members of our club. Key Requirements: - The frontend should facilitate member status tracking. This includes monitoring membership renewals, expirations, and any changes in membership levels. - It should also support communication with our members. This entails enabling the sending of email notifications directly from the system, without needing to switch to a different platform. - The system should be intuitive and easy to navigate, ensuring even the least tech-savvy staff can use it with ease. Ideal Skills: - Strong experience in Microsoft Access and frontend development. - Proven track record in creating systems for member management. - Excellent understanding of email integration within databases. - Ability to design user-frien...
I need an experienced Arduino engineer to help me with a project. The goal is to control a filter press through a progressive increase of air pressure. This will be used in an industrial setting. Key Requirements: - Design an automated control system using Arduino and remotely control - Implement this to regulate air pressure in the filter press Ideal Skills: - Strong background in Arduino programming - Previous experience with industrial automation systems - Understanding of filter press operations
...an encrypted message or hash that only your server can validate. ✅ Solution: Use NTAG 424 DNA for AES-128 encryption & dynamic authentication. ❌ Risk: More expensive than regular NFC tags but extremely secure. 3. Implement Server-Side Authentication (Tokenized URLs) Instead of embedding a static URL on the NFC tag, generate a unique, temporary token for each scan. The URL could look like this: arduino Copy Edit The token is validated server-side and can: Expire after one use (prevents replay attacks). Be tied to the NFC chip UID (ensures it’s the original tag). Include a cryptographic signature (HMAC or JWT) to prevent tampering. ✅ Solution: Use JWT (JSON Web Token) or HMAC signatures to validate scans. ❌ Risk: Requires a server backend to generate
I'm looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and use alternative libraries or frameworks.
Vær venlig at Tilmelde dig eller Log ind for at se detaljer.
I'm seeking an architect and...and laundry room - Implement a minimalist interior design style Ideal Skills and Experience: - Proven experience in residential architecture - Strong background in minimalist interior design - Proficient in creating balanced mixed-layouts - Previous work featuring guest bedrooms and laundry rooms 2 bedrooms 2 baths, both bedrooms are to be 12’x12’ and master bath to be 6’x12’ and guest bath 6’x10’ Laundry room can be 6’x6’ Need a 24’x22’ attached garage. Ceiling height to be 9’ Require a front porch of at least 8’ in depth Require a screen porch on the back or side of the house. 10’x16’ minimum. House to be built on 1.5 acre wooded lot. Prefer exterior to be b...
We bought a NextJS React Material UI based Dashboard Application (See Vuexy links attached below). We wanna run this Dashboard as a Microsoft Teams Application. Microsoft Teams has a developer toolkit which does the scaffolding for a ...SSO: Teams Dev Samples: Your Tasks: - Create the Repository, and do the Teams Tab Scaffolding - Bring in the provided complete developed Dashboard into Teams App Platform - Handle the Dark/Lite Mode so when you switch in Teams it should be switched also in the Dashboard Dev Environment: We provide you a Microsoft 365 Development User tin our Tenant and all the Dashboard Files.
Programa para Arduino ESP32 e display TFT 2.4 220x320 ILI9341 com um temporizador de 00min. 00seg. disparado por uma entrada que tbm dispara um totalizador de 4digitos e indicação de um codigo QRcode
I need an Arduino Uno code, alongside a connection diagram, that will allow me to integrate an RFID reader with a MIDI serial bridge. The setup should output a distinct MIDI note for each of my 6 RFID tags. Key Requirements: - Each RFID tag should trigger a different MIDI note when scanned. - The MIDI note numbers need to be hard-coded within the program. - The use of a 7-byte RFID tag, with UID provided by me. Ideal Skills: - Proficient in Arduino programming. - Experience with MIDI serial bridge setups. - Knowledgeable about RFID technology. - Capable of creating clear, understandable connection diagrams. The connection setup will be as follows: - An RFID reader is connected to the Arduino. - The Arduino is linked to a Hairless MIDI serial bridge. - The s...
I'm looking for a skilled engineer to develop an Arduino-based project for controlling an LED light. The light will be an LED and will be activated through a mobile application with a simple click. Key Requirements: - Experience with Arduino programming - Proficiency in developing mobile applications - Knowledge of LED circuitry - Ability to create a seamless user experience - Good communication skills for project updates and discussions The main task will be to design the control system, program the Arduino, and develop the mobile app interface. The goal is to have a functional, user-friendly system for controlling the LED light via clicks on a mobile app.
I need an experienced network engineer to configure my new Cisco network setup, which includes one core switch, four edge switches, a firewall, and a Cisco Wireless LAN Controller (WLC). Key Configuration Tasks: - Core Switch Setup: Configure the core switch for four uplink fibers through SFP. - Edge Switch Configuration: Set up all four edge switches. - DHCP Relay: Implement DHCP relay across the network. - Firewall Integration: Configure trunk port for firewall gateway. - VLAN Creation: Establish four VLANs for data, Wi-Fi, and voice. This project is for a fresh setup, with no existing infrastructure. All equipment is running Cisco IOS. Ideal candidates will have extensive experience with Cisco hardware and IOS, and a strong understanding of network configu...
I'm looking for a professional software developer to create a comprehensive web-based property management software for managing my properties. It should cover the following tabs: - House address - Legal Owner - Monthly mortgage - Monthly Rent - Track rent payment - Purchased date - Outstanding mortgage - Current Value - Mortgage Bank - Account No: - SWITCH DATE - Offer expire/details - Debted bank account - Insurance - Gas certificate - Electricity certificate - REPAIRS The software should be compatible with Windows operating systems and accessible to two user types: Admin and Property Manager. It should not be accessible to Tenants. The ideal candidate for this project should have extensive experience in software development with a strong portfolio in creating property m...
My WordPress site hosted on a Synology NAS is experiencing performance issues. When the site is configured with an internal address (url and home in wp-options) it works perfectly and we can access the dashboard quickly and without issues. When we switch the website to using an external address then we have issues. We have set our firewall to NAT the external address to the NAS and this works fine. The website loads quickly and performs well from both inside and outside the network, so we have discounted issues with the firewall/NAT. However the dashboard is extremely slow, both when accessed via an external IP address and when accessed from an external address - two or three minutes to connect and two or three minutes to react to each mouse click once connected. Please only respond...
*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Weste...
I'm looking for an experienced developer to port existing Arduino and Raspberry Pi project (found at ) to an STM32 microcontroller. The project involves sensor integrations, data logging, and control algorithms. Key Requirements: - Porting critical features from the existing project - Implementing WiFi capabilities using the STM32's built-in WiFi module - Open to using alternative libraries or frameworks instead of the ones used with Arduino and RPi Ideal Skills and Experience: - Proficient in STM32 programming - Experience with Arduino and Raspberry Pi - Knowledge of sensor integrations and data logging - Familiarity with control algorithms - WiFi module implementation experience - Ability to suggest and use alternative libraries or frameworks.
...Remembers previous interactions within a session. • Can retrieve past data (e.g., user preferences, order history). 1.4 Predefined & AI-Generated Responses • Combination of scripted responses (FAQs) and AI-generated replies. • Allows businesses to customize responses based on their needs. 1.5 Multi-Language Support • Supports multiple languages using translation APIs. • AI should detect and switch languages automatically. 1.6 Voice & Text Input Support • Text-based chat. • Voice input/output (optional). • Text-to-Speech (TTS) and Speech-to-Text (STT) integration for voice chatbots. 1.7 Live Chat Handoff • Transfers conversation to a human agent when needed. • Seamless escalation without user frustration. 1.8...
This looks like a very simple fix, but there will be more work later. Look here to see the device. The home page has a two minute video that will explain what we are doing. The Arduino controls four pumps using PWM by pressing any of 12 keys on a keypad. All "formulas" are timed to shut off automatically. We have added (and it works) the monitoring of BLE beacons so that the MAC address nearest the Platform is identified and the Platform sends a line similar to the following message to Serial Monitor #2502101,10991,5,ff:ff:11:4c:50:d1,99& Serial # of Platform time in seconds since Platform powered up + 10000 MAC address of nearest beacon (They all transmit address,"iTAG" there are 13 spaces behind iTAG, and signal strength That is all we need to det...
It sounds like you’re looking for a s...business details. • Inclusive: Appeal to potential investors, food enthusiasts, and supporters who want to be part of your journey. Sample Opening Visuals: A busy family struggling to find healthy, affordable meals. Voiceover: “Imagine a world where your favorite meal arrives at your door, freshly prepared, in record time—and every delivery supports local businesses and reduces food waste.” Switch to Founder: “Hi, I’m [Your Name], and I’m on a mission to revolutionize food delivery. At [App Name], we’re not just delivering meals; we’re delivering a better way to eat, live, and support our community.” Would you like me to create a detailed draft based on this outline, or do y...
...and responsive design optimized for mobile users. • Consistent branding across the app and web platform. 2. Personalized User Dashboard: • Profile creation with personal health goals and preferences. • Progress tracking (e.g., workouts, nutrition plans, meditation sessions). 3. Cross-Platform Sync: • Real-time synchronization between the web platform and mobile apps. • Users can seamlessly switch between devices without losing data. 4. Push Notifications: • Reminders for workouts, appointments, and daily health goals. • Motivational messages and content suggestions. 5. Interactive Content Library: • On-demand access to videos, articles, and guides directly in the app. • Offline mode for selected content (e.g., pre-download...
I need a skilled developer to embed several YouTube videos into OBS (Open Broadcaster Software) for me. The requirements are as follows: - Layout: The videos should be displayed in a single video view. - Navigation: I want to be able to switch between the videos using buttons for next/previous videos. - Customization: The system should allow me to select which video plays in the stream. Ideal candidates should have experience with OBS and YouTube API, and a good understanding of video streaming. A portfolio demonstrating previous similar work would be highly advantageous.
...can request free access through them]. The goal is to use a standard high-speed 8-bit ADC/DAC for encoding/decoding, but we could also potentially use ADV7280/ADV7391 instead. We currently have a setup that retransmit the video signal through the FPGA with the regular ADC/DAC, but it has a lot of static in the output video. Solving this issue would be the first step or deciding if we need to switch to ADV7280/ADV7391 right away. It would really help if you have some components (FPGA, ADC/DAC, VGA Camera/Monitor) on your side, but otherwise we can run some tests on our setup. We need somebody with previous experience with analog VGA NTSC/PAL signals and FPGA, so please state any relevant experience you have. The project will be split into multiple milestones to better track ...
I'm looking for a talented mobile app developer to create a Smart Home Automation app for both iOS and Android. The server and database are MQTT-based and already set up at a given address. This app will connect with PCB via MQTT, enabling users to control various types of switches (2-node, 4-node, 6-node). Key Features: - Switch Control: Users must be able to control their home switches through the app. - User Registration and Login: The app should offer a secure and easy-to-use login and registration system. - Real-time Updates: The app should provide real-time updates to the users about their home status. UI Style: The app requires a modern and interactive User Interface (UI). So, experience in UI/UX design is a plus. Skills and Experience Required: - Proficient in cross...
I'm seeking an expert in Power BI and DWG file handling to create a bespoke visual for me. This visual should allow for the uploading and connection of a DWG plan with a corresponding room list, complete with attributes. Key Features: - A floor legend to switch between floors and visualize the building's plans. - Interactivity with the plans: Clicking on an object should display its properties in a pop-up. - Highlighting selected objects. - Navigating to a detailed view of an object. - Individual evaluations of objects. The ideal freelancer for this project should have: - Extensive experience working with Power BI. - Proficiency in handling DWG files, particularly with visualizing layer information, color codes, room information, polygons, and object attributes. - Abili...
