Microchip i2c rtcJobs

timer concept lcd 3 relay 3 buttons rtc 6 adc (op amp circuit)

I'm seeking an experienced ASIC designer to create a chip for a programmable voltage source. This project involves the design of an ASIC to control and monitor voltage ...signal processing. - Familiarity with designing for voltage source applications. Please provide relevant examples of past work when bidding. The ASIC should support a voltage range of 0-5V. The ASIC should support an output current range of 0-1A. The ASIC must ensure high precision for voltage and current outputs. The preferred technology node for this design is 65nm. The ASIC should include an I2C interface for communication. The ASIC should include overcurrent protection. The ASIC must be designed for use in consumer electronics environments. The ASIC should operate reliably within a temperature range of -...

...programmer to write an Arduino code for a BQ25887 Charger 5 click USB charging IC board. The code should manage the initiation of charging for two Lion batteries, ensure cell balancing, and support 5V 3A charging from any standard adapter. I am using a MIKROE Balancer 5 click. () The following features are required: 1. *Charging Control Setup:* - Configure I2C communication with the BQ25887 IC and set parameters for automatic charging initiation. - Define maximum voltage (4.2V per cell) and current (1A per cell) limits. 2. *Temperature-Based Charging Adjustment:* - Monitor the temperature using the NTC pin and adjust the charge current accordingly. - Implement safe temperature thresholds to reduce or stop charging in critical

...prioritizes a compact form factor and incorporates an HLK-10M05 power supply module with integrated safety circuits, including safety capacitance and common-mode inductance. The 5V and GND outputs are routed to the load. A 2.54mm pitch is to be maintained for all pin pitches where feasible. An ESP32-S3-DevKitC will be mounted via berg strips. The board requires the following connectors: Three 4-pin I2C connectors (VCC, GND, SCL, SDA) for interfacing with DFRobot SEN0537 (), DFRobot SEN0488 (), and Sensirion SEN63C () sensors. One 2-pin connector for an external push button connected to GND and the RST pin. Three 3-pin connectors for One-Wire communication, connected to

I'm looking for an expert in Arduino projects to help me create a fun demonstration locking system. The project involves: - 3x Adafruit rotary encoders over i2c - 1x 20x4 LCD over i2c - 2x LED outputs The rotary encoders will serve as the main user input for the locking system. The LCD will provide feedback for user inputs, and the LED outputs will display the system status. Ideal candidates for this project should have extensive experience with Arduino, rotary encoders, LCD displays and LED outputs. An understanding of I2C communication protocol is crucial. Please include in your proposal examples of similar projects you have completed. The LED outputs will show the status of the locking system. Power supply for the system will be battery-operated.

...and manageable size and weight. - Design an app that provides real-time tracking and historical data logging. The app should also include a battery indicator, path direction, and a social media function. Alerts and notifications are not necessary. - The app should seamlessly connect with the prototypes for the purpose of animal tracking. - I have CAD renderings and video, and a preference for microchip u-blox. - Ensure the broadheads have high impact resistance to withstand the forces encountered during hunting. - Design the prototypes with a waterproof housing to ensure functionality in various weather conditions. - Incorporate a battery life indicator in the broadheads to monitor energy levels during use. - Design the prototypes to allow for over-the-air firmware updates to im...

...ESP32 + Quectel BG96 (flexible solution with separate components). Nordic nRF9160 (modem and MCU in one chip, simpler integration). Development of schematic and PCB design: The board should include: Modem (Quectel or integrated in Nordic nRF9160). Microcontroller or integrated chip. eSIM or SIM card slot supporting operator 1NCE. Antennas for LTE-M/NB-IoT communication. Sensor connections via UART/I2C/SPI (depending on the task). Power interface considering power consumption. Prototype manufacturing: Ordering the printed circuit board (PCB) and soldering components (or outsourcing). Firmware writing: Main firmware functions: Connecting to operator 1NCE via modem (APN: ). Data transmission via MQTT protocol. OTA firmware updates via cloud (HTTP or MQTT). Processing data from se...

*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Western Balkans in ...

Hi, Im looking for a STM32 & ESP32 programmer located in/near HCMC as you might need to come over to our workshop sometimes for testing. We have a few custom made PCBs that needs to be programmed and tested. Experience working with CANopen, SPI, I2C, IR Remote Protocol, stepper motors , LoRa etc is a plus

I'm looking for a talented graphic designer to create a unique and modern horizontal logo for my technology company, "BrandBolts". The logo should be minimalistic in style, with a touch of microchip imagery. The final deliverables should include a black and a white version of the logo. Key Requirements: - Creative and modern design approach - Strong understanding of minimalistic design principles - Ability to incorporate microchip imagery in a subtle and sophisticated way - Experience in creating horizontal logos Ideal Skills: - Graphic Design - Logo Design - Minimalist Design - Brand Identity Development - Adobe Illustrator or equivalent software proficiency Please provide a portfolio of similar work if available.

...for manufacturing. Bill of Materials (BOM) with part references and key component numbers. Key Requirements & Notes 5 V Operation Both the ATmega32U4 and PCF7991 run at 5 V. No level shifting is necessary for the main signals. USB Connectivity The ATmega32U4 must enumerate as a native USB device—no external USB–serial chip. Include appropriate ESD protection and data-line resistors per Atmel/Microchip guidelines. 125 kHz Antenna & PCF7991 The PCF7991 requires an external coil and matching network. Follow the datasheet for correct tuning and signal integrity. Provide test points or a method to measure the coil’s resonant frequency if possible. Clock Generation The PCF7991 needs a ~4 MHz clock input. We plan to supply this clock from a dedicated 4 MHz ...

...Component Selection & Integration • Maintain key components, including: • FPGA (GoWin GW1NR-9) • Bluetooth MCU (Nordic nRF52832) • Camera (Omnivision OV5640, MIPI CSI-2) • Microphone (TDK ICS-41351, PDM) • OLED Display (SPI interface) • RAM (AP Memory APS256, 256Mb each, Octal SPI) • Flash Memory (Winbond W25Q80E, 8Mb, SPI) • Power Controllers (Maxim MAX77654, MAX17291) • Ensure seamless I2C, SPI, and MIPI CSI-2 communication between components. • Propose alternative components if necessary for improved performance or availability. 3. Power Optimization & Miniaturization • Optimize power management to extend battery life. • Ensure stable operation with 5V input and multiple voltage rails (1.2V,...

*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Weste...

Client requesting Microcontroller bring up work, - i2C sensor test - board bringup

*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Weste...

*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Weste...

*** OVERVIEW *** - Ten US dollars per hour. - One hour per day (or per night). - You will help me design, code, and develop an IoT product using MicroPython running on an ESP32 microchip. - You do *not* need any experience with microcontrollers, electronics, electrical engineering, mechatronics, Arduino, PCB, circuit design, or Python. - If Freelancer.com prevents you from bidding on this project or if you want to avoid “spending” one of your Freelancer bids you can apply "passively” for this project by pasting "MicroPython_ESP32_11_September_2019" into your Freelancer profile. Please see the section below in this posting called *** APPLYING "PASSIVELY" *** for more information. *** LOCATION *** You must live the Weste...

...for an expert in Arduino programming and embedded systems to update my existing Arduino code. The code needs to function based on a DS3231 RTC in two different scenarios: 1. Day/Night Temperature Regulation: The Arduino will determine whether it's day or night using data from the DS3231. During the day, it will maintain current temperature values. At night, it will switch to using predefined lower values. 2. LCD Display Management: The code should also handle an LCD display that shows the current time, the day/night scenario, temperature, and fan speed details. Skills and Experience Required: - Proficient in Arduino programming - Experience with DS3231 RTC - Familiarity with LCD screens - Knowledge of DHT11/DHT22 temperature sensors - Ability to modify existing cod...

...nanoseconds (or ms) that increments each interrupt by 1,000,000 ns. Provide Unix timestamp: Use the RTC to track “Unix time” in seconds (if needed for real-world time reference). Convert or read the RTC to produce timestampUnix. Stream data over UART: Continuously send lines in the format: timestamp timestampUnix E.g. 1723390177448695880 1723390176459 Transmit at a fixed baud rate (e.g., 115200) to the Pi. 2. Core Requirements TIM2 @ 1 ms Configure prescaler/period for a 1 ms interrupt on STM32F103 (72 MHz). In the interrupt, update timestamp (+1,000,000 ns). Optional RTC Enable the STM32 RTC if real-world date/time is needed. Read or convert to ...

I'm in need of an experienced embedded software engineer to assist in t...engineer to assist in the development of software for an ATSAM and ATMEGA microcontroller. The primary focus of this project is to implement functionalities for a Battery Management System (BMS). Key Responsibilities: - Implement communication protocols (I2C and CAN) - Develop embedded software for sensor data collection and motor control BMS Features to be Developed: - Battery monitoring - Charge/discharge control - Balancing management Ideal Skills & Experience: - Extensive experience with ATSAM and ATMEGA microcontrollers - Proficient in I2C and CAN communication protocols - Prior experience with developing embedded software for BMS - Strong skills in motor control and sensor data collec...

...correction system using NTRIP and communicating with the ZED-F9P module via I2C. Code is ready but we are having some issues, and they must be fixed. - we have the project hardware done, just need to get the code fixed, we can test locally after changes. Project Overview: The system receives GPS correction data via NTRIP using an internet connection through either Wi-Fi or mobile data. These corrections are then transmitted to the ZED-F9P module to enhance GPS accuracy. Currently, the code has issues specifically with mobile data connectivity and the NTRIP connection. Required Skills: ● Advanced experience in C++ programming ● Proficiency with the Arduino IDE and related libraries ● Expertise with ESP32, specifically in: ○ I2C communication (for the ZED-F9P module) ○ W...

I'm in need of a professional to design a breakout board for the AD5933 chip. The primary application for this chip will be impedance measurement, specifically up to 100 kHz. This project requi...for this chip will be impedance measurement, specifically up to 100 kHz. This project requires a deep understanding of the AD5933 chip, as well as the principles of impedance measurement. Key requirements: - Design a breakout board for the AD5933 chip - Ensure the board is compatible with I2C for communication Ideal candidates will have: - Prior experience with the AD5933 chip - A strong background in electrical engineering and circuit design - Experience designing breakout boards - Proficiency in I2C communication interface Please include examples of similar projects you...

We are seeking a skilled engineer to design and develop a 30 KW DC fast charger based on the Infineon /OnSemi/ Microchip SiC module reference design.. The inverter will need to handle power ratings between 10 kW to 50 kW. Ideal Skills & Experience: - Background in power electronics - Proven track record in inverter/fast charger design - Experience in industrial applications and CANBus protocol - Ability to design for power ratings between 10 kW to 50 kW We are seeking a skilled engineer to design and develop a 30 KW DC fast charger based on the Infineon SiC module reference design. The ideal candidate will have experience in power electronics and familiarity with high-efficiency charging technologies. Your expertise will be crucial in ensuring the charger meets performance an...

...TEA5767 and an Arduino Uno. The unit should include: - A button to start and stop the sweep - A button to switch between forwards and reverse sweeps - A button for a random sweep - A potentiometer to adjust the sweep speed - An I2C IIC LCD 1602 Module to display the current frequency, sweep rate, and sweep direction, all on separate lines - A signal strength indicator The code must utilize pull-up resistors for the buttons. The ideal candidate should have extensive experience with Arduino programming, specifically with the LiquidCrystal_I2C.h library for the I2C display module. The display should be set to show separate lines for each piece of information. Please include wiring diagram Please include in your bid examples of similar projects you've completed, parti...

I'm looking for an expert in MicroPython and Raspberry PICO development. The project involves creating a new build of MicroPython, complete with drivers for specific components and wrap-around functions to enable access to and use of those functions. Key Components: - AD5144A Quad Channel,256-Position, I2C, Nonvolatile Digital Potentiometer - ST LPS33K Air Pressure and Temperature Sensor - ST Proximity and ambient light sensing (ALS) module Your tasks will include: -Import the drivers into the Micropython Build -Create the new Build -Write the wrapper function in Micropython to enable access to the imported driver functions -Provide a test app in Micropython for each device to enable demonstration of the functions Ideal candidates should have: - Extensive exper...

I'm in need of a skilled PCB designer to assist with a project-specific PCB design. The PCB is intended for a consumer electronics application, and it will be a double-layer layout. Key compon...with a project-specific PCB design. The PCB is intended for a consumer electronics application, and it will be a double-layer layout. Key components to be included on the PCB: - Microcontrollers - Power regulators - LoRa - RTC - UART - Discrete components Ideal candidates will have a robust understanding of PCB design for consumer electronic products, proficient in double-layer PCB layouts. Experience with placing and integrating microcontrollers, power regulators, and other specified components is vital. Please also demonstrate your knowledge of working with LoRa, RTC, and ...

...Requirements: Recording and Playback Functions: The device should record audio when a button is pressed. The playback should be triggered by an interrupt (via I2C). Audio Quality: The audio resolution should be at least 16-bit for high-quality recording and playback. Audio Alerts: The device should emit audio alerts in the following scenarios: When recording starts. When recording ends. When the battery is low. Power Efficiency: The microcontroller must support sleep mode to save power. The device should operate on 3 AAA batteries, using low-cost and power-efficient components. Trigger by Event: The device should remain in sleep mode until activated by an I2C interrupt. Hardware Testing: The designer must be able to personally test the circuit and hardware and perform expe...

...articles. Social media integrations for jokes, memes, and influencer promotions. Collaboration with pet influencers to enhance client engagement. 2. Client-Facing Platform/App Features: Appointment Scheduling: Clients can view calendar availability, schedule appointments, and receive QR codes or direct links for check-ins. Records Management: Cloud-based access to appointments, medical records, and microchip data. Travelers can access their pet’s records on the fly at any veterinary clinic. Reminders & Communication: Notifications for upcoming appointments and medication schedules. Real-time updates on hospitalized pets via the dashboard. Telemedicine: Rapid remote video assessments to determine the necessity of in-person visits. Communication options with vets for spe...

...requirements. The trainer must have expertise in Verilog and practical experience with the Vivado Design Suite. The training should cover basic and advanced topics, including working with interfaces like I2C, SPI, and UART. Requirements: Proficiency in Verilog HDL and strong knowledge of digital design concepts. Practical experience with the Vivado Design Suite for coding, simulation, synthesis, and debugging. Ability to design a comprehensive syllabus covering: Basics of Verilog and digital design fundamentals. Advanced Verilog topics (FSMs, testbenches, synthesis, and optimization). Interfaces: I2C, SPI, UART, and other common protocols. IP core usage and integration in Vivado. Hands-on projects and practical examples. Strong communication and teaching skills to simpli...

...to assist in controlling multiple I/O devices via the I2C interface in my PICO C project. The schematic capture has been completed, but might require some adjustments tied to project milestones. After this phase, I'll be handling the PCB layout and procuring the first test board. Key Responsibilities: - Adjust schematic capture as necessary - Write PICO C code for controlling sensors and actuators - Include RaspPi5 test code to verify I2C commands - Focus on critical functionalities such as control commands, error handling and I2C two-way communications Experience with I2C communication is essential, specifically with a single master and multiple slaves configuration. Proficiency in PCB design and familiarity with test procedures for I2C communi...

Vær venlig at Tilmelde dig eller Log ind for at se detaljer.

...administration, device drivers, Raspberry Pi interfacing, and system customization. ARM Microcontroller Diploma (92 hours) – Covering ARM architecture basics, interrupts, real-time systems, audio processing, UART, SPI, IoT integration, and bootloader development. AVR Embedded Systems Diploma (168 hours) – Involves C programming, embedded systems concepts, interfacing LEDs, LCDs, motors, UART, SPI, I2C, ADCs, real-time OS, FreeRTOS, and embedded testing. Data Analytics Diploma (128 hours) – Includes Python programming, linear algebra, calculus, probability, statistics, database design, SQL, data visualization, Fourier analysis, and image/audio processing. Automotive Embedded Diploma (112 hours) – Focus on automotive communication protocols (CAN, LIN, UDS), ...

...Thermal Camera Integration Description: I am seeking a skilled Python developer with experience in Raspberry Pi, I2C communication, and MLX90640 thermal camera modules. This project involves developing a Python library to enable the continuous and parallel operation of four thermal cameras, capturing data at a minimum frequency of 8Hz per camera, without the use of a multiplexer. Key Requirements: 1. Python Library Development: - Create a custom Python library for MLX90640 thermal camera modules. - Enable continuous data capture for all pixels (24x32 resolution) for four cameras, saving the data into CSV files. 2. Communication Setup: - Establish custom I2C buses for each camera using predefined Raspberry Pi pins (rearrangements possible but limit...

...design for a specialized microcontroller project. There will be a defined board layout and initial choice of components. All boards you design shall have evluation board quality. It means that they will not actually go into real components and be used for internal purposes only. Ideal Skills: - Extensive experience in PCB and hardware design, including power supply, FTDI, UART, CAN, SPI/QSPI and I2C - Microcontroller and Microprocessor layout experience, especially industry-grade controllers like NXP, STM32, Renesas and Raspberry Pi CM - Knowledge about signal integrity, EMC and good design practices in general Requirements - all parts must be available and recommended on Mouser or Digikey - no China replicas - all design must take place in KiCAD - you will need to hand over ...

I'm seeking a skilled PCB designer with experience in IoT devices. The task is to design a compact PCB (4x3cm or smaller) incorporating the STM32 microchip for UART, SIM800L (GSM), and NEO-6M (GPS). The design should also accommodate a buzzer, mini LEDs, and USB-C charging, with provisions for battery integration (details to be finalized). Key Tasks: - Optimize the antenna design for GSM and GPS to ensure the best performance. - Create compact and efficient layouts that can withstand the rigors of a prototype. - Transition existing code from ESP32 to STM32. Key Considerations: - The primary focus of the PCB design is compactness. The smaller the PCB, the better. - The IoT device will be powered by a rechargeable battery, so consideration for this power source is crucial. - G...

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,...180,31,71,17,030,17,72,61,065,,78,03,258,10,1*75 $GLGSV,3,2,10,79,18,305,27,80,12,357,26,81,14,306,,86,00,118,12,1*7E $GLGSV,3,3,10,87,45,110,26,88,68,324,31,1*7A $GAGSV,3,1,11,02,04,20 as it should be: Latitude: xx.230239 Longitude: xx.260847 Snelheid: 0.00 km/h Hoogte: 2.60 m Aantal Satellieten: 12 Tijd: 23:40:15 So change my sketch or give me Arduino Uno sketch for my neo m9n connected via i2c !! not serial! and give me nice output. Write strawberry in your message so I know you have read everything. all coordinates are not m...

Help met get NMEA output by a NEO M9N GPS (Sparkfun) parsed by tinygps (serial) so that info looks smooth / nice in the serial output in Arduino. So I want to combine the SFE_UBLOX_GNSS with Tinygps how the simple sketch output/serial is now: $GNRMC,...180,31,71,17,030,17,72,61,065,,78,03,258,10,1*75 $GLGSV,3,2,10,79,18,305,27,80,12,357,26,81,14,306,,86,00,118,12,1*7E $GLGSV,3,3,10,87,45,110,26,88,68,324,31,1*7A $GAGSV,3,1,11,02,04,20 as it should be: Latitude: xx.230239 Longitude: xx.260847 Snelheid: 0.00 km/h Hoogte: 2.60 m Aantal Satellieten: 12 Tijd: 23:40:15 So change my sketch or give me Arduino Uno sketch for my neo m9n connected via i2c !! not serial! and give me nice output. Write strawberry in your message so I know you have read everything. all coordinates are not m...

...a project involving a DC motor, multiple sensors, and PCB design. Key Requirements: 1. **DC Motor Control**: The primary function of controlling the DC motor is speed regulation. 2. **Sensor Integration**: The project will involve the use of various sensors including: - Temperature sensor - Light sensor - Humidity sensor - Solenoid Valve - Flow Measurement - Sim Module - RTC 3. **PCB Design**: The PCB will need to cater for: - Signal processing and conditioning - Power management - Communication interfaces Ideal candidates should have a strong background in motor control, sensor integration, and PCB design. Expertise in signal processing, power management, and designing communication interfaces is a must. Experience with the specified sensors an...

Project Description I need a professional hardware/electronics designer to create a complete ESP32-S3-based pcb. The design will feature: - ESP32-S3 module (placed on edge side of the PCB) with USB-C for programming. - 18 high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM ...high-resolution analog inputs for NTC 10K/20K/100K sensors with shared COM pins. - 8 solid-state relay (SSR) outputs for controlling contactor signals, with shared COM pins. - One high-reliability 0-10V analog output. - Ethernet port with the W5500 IC and RJ45 connector at the bottom edge. - Integration of an external RTC module (DS3231) with battery backup for accurate timekeeping. - Power regulation, protection circuits, and optimized PCB design. - Milled slits for isolating ...

...system product called HAWK. This product has an AI/edge compute SOM that we control with an ESP32. This is our own product. The primary goal of this firmware is data acquisition and BLE communications. Key Requirements: - Proficient in firmware development for STM32 and ESP32 - Experience in developing with BLE - Proficient with C, Python and C++ - Proficient in implementing UART, SPI, USB and I2C communication protocols - Proficient with at least one electronics simulations tool - Proficient with at least one electronics capture and PCB design tool - Excellent written and verbal communications skills Ideal Skills: - RF design circuit skills - High speed digital circuit design skills - RC timing circuit design skills - Active and passive electronics design skills - Advanced ...

Project Requirement: Line Recorder with Bluetooth Objective: Develop a compact Line Recorder device with Bluetooth connectivity that connects to a mobile app for controlling and managing call recordings. Key Features 1. 3.5mm Audio Connectivity: * Input Port (IN): Connects to the phone via a 3.5mm TRRS cable (e.g., Typ...or stop recording. * Download Recordings: Retrieve the recorded audio file via Bluetooth. * Clear Storage: Automatically delete the recording after download. 3. Recording Capabilities: * Record audio passing through the 3.5mm * Use the ESP32’s internal ADC for recording,We just require normal speech quality data. If this does not work at all then consider using an external i2c or some adc that is cheap We will develop the mobile ...

I'm looking for a skilled professional with experience in ESPHome and I2C sensors to integrate my AS7331 UV sensor. The primary goal is to monitor UV levels. Key Requirements: - Integration of AS7331 UV I2C sensor with ESPHome. - Use of a buzzer for notifications when UV levels reach a certain threshold. Additional Information: - No complex interfaces are required, just the buzzer. - No need for extra alerts or notifications beyond the buzzer. Skills & Experience: - Previous experience with ESPHome and I2C sensors is a must. - Ability to set up simple alert systems. - Knowledge of UV monitoring systems is a plus.

...move during printing. Any DIY solution will also be considered or developed from off the shelf components. In that case we shall expect all the source codes, supporting docs, manuals, training as well, included in your fixed price. We shall assume a pre-built laser, unless specified by you otherwise. The unit will be packaged by us and controlled by our RPi based system programmatically via TCP, I2C, SPI, UART, or RS485 ports. So the laser unit must have a comm protocol given. Marking area 30x30mm to 500x500mm, print from about 2 CM to 5 CM distance to bottle. Should be low power output around 10 W. The laser should be human safe. We like to stay around US$1000 per unit NRE cost, but is not hard fixed amount. We have looked for some units but have not found a suitable one. You m...

...create a communication and querying platform capable of interfacing with a TI ADS7138QRTERQ1 A to D converter through an I2C communication board. The platform's primary purpose is for research and development, and it should read data from multiple sources, including: - Voltage - Current (INA293B2) - Three Temperature IC's (LMT90DBZR) - One Temperature/Humidity Sensor (SHT30-ARP-B) -We also have the board to be able to select between two I2C addresses so that needs to be verified. I can provide the necessary information on Analog offsets and will need assistance setting the registers. A schematic can be provided once a candidate is selcted Key Requirements: - Expertise in I2C communication - Experience with A to D converters - Proficiency in setting up...

...in **power electronics**. - Proficiency in embedded C/C++ programming. - Hands-on experience with microcontrollers and embedded systems. - Knowledge of battery management systems and protection mechanisms. - Expertise in hardware interfacing and debugging. **Preferred Skills:** - Familiarity with simulation tools (e.g., MATLAB/Simulink). - Experience with communication protocols (I2C, SPI, UART,STM32). - Background in display module interfacing for indicators. **Why Work With Us?** - Opportunity to showcase your expertise on a critical, innovative project. - Competitive compensation and flexible work terms. - Potential for long-term collaboration if we are impressed with the project outcome. How to Apply: Interested freelancers can share their updated...

...am a beginner looking for a comprehensive teacher for embedded systems. I need help with the following topics: - Microcontrollers - RTOS (Real-Time Operating Systems) - Embedded C programming - IoT (Internet of Things) - Sensors: Understanding and interfacing with various types of sensors. - Actuators: Usage and controlling actuators in embedded systems. - Communication Protocols: Mastering SPI, I2C, UART, and other communication methods. - Debugging Techniques: Strategies and tools for debugging embedded systems. - Power Management: Techniques for optimizing power consumption in embedded devices. - Wireless Communication: Implementing wireless technologies like Bluetooth and WiFi. - PCB Design: Fundamentals of designing printed circuit boards for embedded systems. - Embedded Sec...

Design a mixed-purpose IO PCB in KiCAD. Puropose of this board is for neat int...Board design elements 1) Assuming external PSU having 24V and 5V rails, provide polyfuses and power indicators. 2)Generate necessary lower voltage supply rails via linear regulators off 5V Separate polyfuses for each 1-wire device group supply 3)Provide footprint for microcontroller board, routing power, UARTs and i2c buses to it. 4)Provide 1 DS2482 i2c to 8-channel 1-wire chips c/w esd diodes etc each bus broken out to 2 sets of terminals 5)Provide 4 SPST NO Relay driven by i2c bus expander of your choice 6)Provide 2 no isolated RS485 line drivers 7)Provide 16 no 24V 1A PWM outputs- suggest PCA9685+mosfets? General, Footprint for Rasberry pi 4, and ESp32 boards LEDs on all Relay coils...

I need a professional with extensive experience in hardware desig...with microcontrollers and communication modules - Understanding of data processing requirements for embedded systems Ideal Skills: - Proficient in designing hardware that can efficiently process data - Capable of designing hardware that interfaces well with communication modules - Familiar with the specifications and requirements of Toyota MHE - Knowledge of various interface protocols such as I2C, SPI, and UART. - Experienced in designing hardware for RF communication modules. - Skilled in implementing security measures for embedded hardware systems. Your role will be to create a robust, efficient hardware design that will support data processing requirements. Please include examples of relevant past work in your...

...my Raspberry Pi dual ethernet board. The testing should cover a comprehensive range of components including: - Ethernet ports - USB ports - Serial ports (RS-485) - SD card - HDMI - Audio - DI/DO - I2C interface - Verify the functionality of the Inter-Integrated Circuit interface. - SPI interface - Ensure the Serial Peripheral Interface is working correctly. - WiFi connectivity - Test the onboard WiFi module for stable wireless connections. - Bluetooth - Check Bluetooth connections and data transfer capabilities. - GPIO pins - Test the General Purpose Input/Output pins for proper functioning. - RTC module - Verify the Real-Time Clock module for accurate date and time retention. - Camera interface - Ensure the CSI port correctly interfaces with compatible cameras. - LCD int...

I'm seeking a professional to design a custom ESP32-S2 breakout board. The board should include connections for: - 2 x buttons with LEDs - 1 x LCD I2C screen - 1 x HC-SR04 Ultrasonic sensor The ideal candidate should have access to an HC-SR04 sensor and be comfortable with the project being split into two parts: board design and code verification. Key Requirements: - Board will need to be powered via USB-C - All button and peripheral connectors should be JST connectors - No specific size constraints for the board I have the code ready for the sensor and would appreciate someone who can go over it with me and ensure everything works. Skills and Experience: - PCB design - Familiarity with ESP32-S2 - Experience with code testing and debugging - Access to HC-SR04 Ultrasonic ...