Thermodynamics trabalhos

Matlab Home work 6 Product: Assignment Writing Paper Length: 3 pages825 words Citation: APA References: 2 English: US Deadline: November 28, 2014 Details: I actually need help on the same class the Thermodynamics/Power Systems. I only have 2 homework lefts for that class, which is (HW#6 & HW#8) I need these homework soon The homework must be done on MATLAB. I have attached other homework problems along with its solutions please use them as an example see the way they were done

Full report comprises the following items written strictly in the following order : - Experiment title, Abstract, objectives, introduction/theoretical section including information on the use and benefits of heat pumps, theoretical analysis (including the equations controlling the operation of the heat pump) and illustration, experimental data (tabulated), sample of calculations, experimental results (tabulated), full discussion, concluding remarks and the heat pump cycle chart (showing the actual cycle of the pump in full load condition). Objectives: 1. To determine the coefficient of performance of Hilton heat pump, under steady state condition, using various calculation methods. 2. To verify between the calculated coefficients of performance and explain the discrepancy. 4- To chec...

The two assignments are: 1) Dynamics - deriving formula and working on matlab. 2) Thermodynamics Please reply to this project with information about why you feel you would be right for this position. Proof of qualifications will be required before the work begins.

i posted a file that i need help with my thermodynamics homework, i need someone who can solve this 10 questions for me with really good explanation so i can understand it, the homework is due after 15 hours and i cant extend more time for it.(there is homework hints that will help you solve it.

Dear Expert Please confirm for this. Compensation: INR 750 Deadline: 23 November 2014 9 AM Word Limit: 1050 Price $10 Grade Level : Graduate Grade Level Subject : Other Engineering Message : I have already put my data in blue and please check it for plagiarism and references are required as well.

Hello, I am searching engineer who know about Solidwrorks. This is project is urgent, Please bid if you have experience about it. i will provide more details. Thanks

Hello, I am searching engineer who know about Solidwrorks. This is project is urgent, Please bid if you have experience about it. i will provide more details. Thanks

Using the Chapter 12 – 3D Thin Shell AnalysisView in a new window tutorial from “Introduction to Finite Element Analysis Using SolidWorks Simulation 2012” by R.H. Shih as a guide, design a pressure vessel big enough to hold EXACTLY 15-kg of R-134a refrigerant as a saturated liquid at 20-C. Use Alloy Steel as your material and a diameter of 0.2-m; your tank should be the same shape as the one in the tutorial. You do NOT have to model the whole tank, just the section illustrated in the tutorial. Once you have calculated the dimensions of your pressure vessel, use the simulation software to analyze the factor of safety in the pressure tank for various wall thickness values. The wall should be a minimum thickness but still be able to withstand the pressure from the mater...

The 3rd Problem is due on the 3rd of Dec, i'll need the work by the 24th so i could go over it with my professor and then get back to you to fix what needs to be fixed It's about Gas Butane C4H10 @ 25 C and 1 atm, it enters a well insulated reactor,and reacts with air at the same temperature and pressure. For a steady state operation and negligible Kinetic and potential energy. A:) Determine the tempreture of combustion product for complete combustion with 150% a theorotical air using relevant enthalpy data B) Derive a simplified equation for estimating the adiabatic flame temperature (Tfa) as a function of the fuel high heating Value ( Qhhv), Air-to fuel ratio, (A/F) Averaged specific heat. (Cc), of combustion gas and temperature (To) At the initial condition...

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

The numericals are is based on thermodynamics.

4 questions of thermodynamic and I want them to be answered with full steps

Thermodynamics assignment For details and precision, check out the file attached ( 4 images) Timeline for submission: Tuesday, 28 October 2014, 13:00:00 Pages required: 4 – 1100 words Paper must be APA cited – 4 references needed

Please see the attached details and go through it. Also let us know if you have any query.

two problems " 2nd and 3rd 2nd problem is due on the 3rd of Nov Each one is due at a different date, i just need one of them done by the 3rd of next month at most. The 2nd one is solved using Van der waal equation and i'll provide the book. Van der waal eq : P=((Rbar * Tbar)/(SpcVbar-b))- (a/SpecVbar) Use given temps in problem and make small intervals for v plot, make a Pv Plot using the v intervals Get the delta v : and describe the behavior Plot dome from table A-2 .... plot dots please be as detailed as possible when discussing your approach is the behavior stable, unstable, meta-stable. I'll attach the book, and a copy of the project my budget is 20 dollars for each problem 40 dollars in total,

just solve thermodynamics question contact me for full detail of the work

just solve thermodynamics question contact me for full detail of the work

just solve thermodynamics question contact me for full detail of the work

Thermodynamics questions. full answers with steps. See attached files.

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

Superheated steam @ 40 bar / 500 degrees Celsius is supplied to the turbine of a Rankine is the thermal efficiency if the condenser pressure is 0.03 bar. If isentropic efficiency of the steam turbine ( as above ) is 0.82 - what is the Enthalpy of the steam discharged into the condenser and the thermal efficiency of the cycle. Steam @ 30 bar and 500 degrees Celsius enters a pass out turbine at a rate of 18000 kg h- 1. The majority of steam is expanded isentropically to a condenser pressure of 0.03 bar, 32 percent is bled from the turbine @ 3 bar for process heating. If the condensate from this process heater is directly pumped back to the boiler ; what is - the power output from the turbine, rate of process heating and the efficiency of the plant. PLEASE I NEED ONLY ANSWERS TO THE QU...

please answer the following Superheated steam @ 40 bar / 500 degrees Celsius is supplied to the turbine of a Rankine is the thermal efficiency if the condenser pressure is 0.03 bar. If isentropic efficiency of the steam turbine ( as above ) is 0.82 - what is the Enthalpy of the steam discharged into the condenser and the thermal efficiency of the cycle. Steam @ 30 bar and 500 degrees Celsius enters a pass out turbine at a rate of 18000 kg h- 1. The majority of steam is expanded isentropically to a condenser pressure of 0.03 bar, 32 percent is bled from the turbine @ 3 bar for process heating. If the condensate from this process heater is directly pumped back to the boiler ; what is - the power output from the turbine, rate of process heating and the efficiency of the plant. MY BU...

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

Solve 6 papers of Thermodynamics. We need following 6 papers: 1. May 2014 - 2. December 2013 - 3. May 2013 - 4. December 2012 - 5. May 2012 - 6. December 2011 -

We are looking for people to solve past question papers of Mumbai University and VTU. These solutions will be uploaded on our website - stupidsid. Here's a demo page: Remuneration: Rs 500 per paper. We need 6 papers per subject. We need solutions for these subjects: MU SEM 3 Thermodynamics MU SEM 3 Strength of Materials MU SEM 5 I C Engines MU SEM 5 Mechanical Measurements and Control MU SEM 5 Production Process-III MU SEM 5 Theory of Machines- II MU SEM 5 Heat Transfer MU SEM 7 Machine Design 2 MU SEM 7 Manufacturing Planning & Control VTU SEM 3 Material Science & Metallurgy VTU SEM 3 Manufacturing

Three problems Each one is due at a different date, i just need one of them done by the 6th of next month and the rest at your convenience " Just before their due date".

It is related to thermodynamics.

I NEED THE QUESTIONS TO BE ANSWERED STEP BY STEP WITH AN EXPLANATION :D

thermodynamics lab report. please see the attached files

I have attached thermodynamics lab report with the result and previous student work to get the idea please check. Price-40 aud Need within 2 days

I need some quality engineers for academic problems on , 2. Structural engineering, 3. Thermodynamics, 4. Computer science engineering including C, Java and matlab, 5. civil engineering. I have separate projects for each of the subjects. I will post them as additional files.

the expert is required to make a ANN based model as mentioned in the pdf attached ....the expert shall need knowledge of thermodynamics...chemical engineering , radiation emission spectra...and ANN of matlab...+ expert shall have to make report and power point presentation for the same project....the pdf is attached for the expert to go through and reproduce the same work....expert may have to see another references ..... based on the need of the model development ...expert has to take that responsibility to make the model without asking any further technical support....

Subjects - 1. Mechanics of Materials 2. Basics of Thermodynamics 6 papers of each subject needs to be solved.

I have two questions I need done within the next hour. 1. A two-phase mixture of water vapor and liquid has a pressure of 600 kPa. On a mass basis, 0.60 of the H2O is liquid. Find the temperature and specific volume of the mixture. 2. A two-phase mixture of water vapor and liquid has a temperature of 120oC. On a mass basis, 0.35 of the H2O is vapor. What is the pressure and specific volume of the mixture? Please respond soon if you can complete these within one hour.

The pdf is attached "on Prediction of emission spectra for flares and solid rocket propellants".....matlab code developer is required to be expert in handelling newral network based modelling and generating database for the network..... Expert will have to make an ANN model or an alternative model which serves the objective .....whereas he has to make report in word or in some report writing software cum power point presentation on the same ....which will make me(end user) understand the complete thing Skills required: Database Development, Matlab & Mathematica, Powerpoint, Report Writing

have some problems that need to be sovle

Hello, I am looking for someone who is familiar with the concept of partitioning coefficient. I need someone with excellent background in thermodynamics. I am expecting someone who performed MS or PhD research on these topics. Thanks!

Length of an essay should be two pages. Essay is about my drop from Purdue University . And I am reapplying. Here are certain things I would like you to know, ...know, while I was out of Purdue. I attended Danville Area Community College Danville, IL. There I took nine credits and completed my genet requirements. I am also making use of my Summers, currently I am taking training from ERP analysts , Dublin ,OH in People soft software, apart from that I am also Involved in online JAVA training with Astir IT Sol New Jersey. Above that I am also taking thermodynamics course Online from Oklahoma state university. I am a senior, I need only 18 credits this semester to graduate. You can use the above points to support any argument in the essay. If you need more assistance please le...

11 Fwexford I I am a student of philosophy and have written a paper on the subject of Time. The conclusions bring me into the heart of physics, thermodynamics, entropy etc. The paper has been reviewed and returned to me with a number of questions in Physics that need to be addressed. I don't feel I have sufficient skills in this area to address them adequately. Therefore I am seeking contact with some person with a background in this area to collaborate with and help bring the weak parts of the paper, identified by the review, up to strength. Please feel free to contact me if interested. Payment or collaboration open for discussion. (Budget selected here is the default option and should not be considered fixed)

An app easy to use, with formulas, descriptions, and some images. From linear motion to thermodynamic. For exemple, we open the app, we scroll down to see ''Thermodynamics'', tap, and here are all the formulas. I want to be able to use it offline, and if possible, add my own content later, and modify.

Please see the attached files . It is thermodynamics go through it and contact me in case you have any query.

Please see the attached files . it is thermodynamics project. Please go through it and contact me in case you have any query.

I want some one to type some questions of thermodynamics in word ..... solution are done on paper i will send you snaps you have to type them in word... needed in one hour only 3 questions.

Engineering questions to be resolved , as attached All answers have to accurate All figures and calculations needs to be explained step by step

Please if you have good knowledge of thermodynamics please bid Budget $50

looking for someone who can do a thermal problem as soon as possible. i need you to do part 1.2 only. please quote only if you are 100% confident after going through the attached file.

Hi, If you are able to do homework for Thermodynamics for engineering and to explain how did you get the answer i will work with you