MacBook Pro (13-inch, M1, 2020) Display Hinge Covers

Before You Begin

Remove the following part before you begin:

Tools

  • Nylon probe (black stick)

  • Torx T3 screwdriver

Removal

  1. Use the T3 screwdriver to remove the two T3 screws (923-05243) from each display hinge cover.

  2. Use the black stick to remove the two display hinge covers from the top case.

Reassembly

  1. Position the two display hinge covers in the top case.

    • Important: Ensure that the top edge of each display hinge cover sits under the top edge of the top case.

  2. Use the T3 screwdriver to reinstall the two T3 screws (923-05243) into each display hinge cover.

Reinstall the following part to complete reassembly:

Published Date: