Skip to main page content
U.S. flag

An official website of the United States government

Dot gov

The .gov means it’s official.
Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Access keys NCBI Homepage MyNCBI Homepage Main Content Main Navigation
. 1988 Oct:(235):224-36.

Composite technology for total hip arthroplasty

H B Skinner  1
Affiliations
  • PMID: 3416528

Composite technology for total hip arthroplasty

H B Skinner. Clin Orthop Relat Res. 1988 Oct.

Abstract

Composite materials, which can be very strong while having a low modulus of elasticity, are being studied because such materials have potential to be made into isoelastic hip prostheses. Composites intended for medical applications incorporate carbon or polyamide as a fiber component, while polysulfone, polyetheretherketone, or polyethylene is used as a matrix component. Mechanical properties (especially the modulus of elasticity) are emphasized because of the desire to match those properties of the proximal femur. Many of the variables that affect the mechanical properties of these materials are explained. The application of stress to different fiber orientations demonstrates the mechanical properties of the composite, and this is proved mathematically. It is shown that in composites with fibers oriented in the same direction, the modulus of elasticity in the direction of the fibers generally approaches that of the fibers as the amount of matrix decreases. Perpendicular to the fibers, the modulus of elasticity of the composite is only slightly greater than that of the matrix material. For isotropic chopped-fiber composites, the modulus of elasticity approaches that of the matrix as the fiber content decreases; at high-fiber content, the modulus is significantly less than that of oriented long-fiber composites. In general, the modulus of elasticity and fiber content have a linear relationship. Composites have fatigue properties that vary with direction and approach ultimate strength in tension but are lower in compression. The fatigue properties of proposed composites are discussed. Abrasion as a cause of stress concentration sites and wear particles is considered.

PubMed Disclaimer

Similar articles

See all similar articles

Cited by

See all "Cited by" articles

Publication types

LinkOut - more resources