Skip to content
/ crash Public

crypted admin shell: SSH-like strong crypto remote admin shell for Linux, BSD, Android, Solaris and OSX

License

Notifications You must be signed in to change notification settings

stealth/crash

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CRypted Admin SHell

An SSH alternative featuring:

  • IPv6 ready
  • lightweight, straight forward and extensible protocol using TLS 1.3 or optionally DTLS 1.2 as transport layer
  • man-in-the-middle safe due to its authentication mechanism which involves the servers host key into the auth process
  • built-in traffic blinding against timing and packet-size info-leak attacks
  • not relying on any system auth frameworks such as PAM
  • can be entirely run as user, no need to setup config files
  • passive/active connects on both ends with most flexible local/remote address+port binding possibilities
  • built-in SOCKS5 client side support when doing active connects
  • easy to port to embedded systems such as routers
  • quiet/hidden mode for secret administration and take-back functionality for owned boxes
  • trigger-mode via syslog, mail or other files if requested
  • emergency mode to extract all necessary key files from the running binary
  • may be started as a CGI with all above functionality, command switches passed via query-string
  • integrated tcp-wrapper-like D/DoS protection
  • intentionally not passing local $ENV to remote to avoid info leaks
  • supports Perfect Forward Secrecy via DH Kex
  • can forward TCP and UDP sockets to remote
  • SOCKS4 and SOCKS5 support to forward browser sessions to remote
  • messenger proxy support
  • proxying based on SNI
  • SNI hiding mode
  • Disguise Filters to mask as different kind of software to global observers
  • can use UDP transport mode with DTLS and added reliability and flow-control layer
  • transparent roaming support with DTLS client sessions
  • suspend/resume support with DTLS client sessions

If you came here for censorship circumvention - once everything is done and working - go to proxywars contrib to learn about how to create WA/TG messenger proxy setups in censorship environments.

Build

Build requires OpenSSL version >= 1.1 or 3.0 or compatible LibreSSL (3.6.1 tested). Inside the cloned git repo:

$ make -C src

On BSD systems you need to install GNU make and type gmake instead.

If you have a particular OpenSSL or LibreSSL setup, check the Makefile and set the appropriate $SSL variable. crash builds also nicely with LibreSSL and BoringSSL.

For Android, edit the Makefile.android or Makefile.android.aarch64 to reflect your NDK and BoringSSL install and use these. The build was tested with android-ndk-r17b.

On OSX you want to install OpenSSL via brew install openssl@1.1 or by hand before make.

On Windows you need to install cygwin and select the appropriate gcc, gcc-g++, perl, openssl (1.1.1), libssl (1.1.1), libssl-devel (1.1.1), make and git packages before the build in order to clone and make this repo. Make sure your openssl versions for the tool itself, the runtime libs and devel package are all the same.

crash was successfully tested on Linux, FreeBSD, NetBSD, OpenSolaris, OSX and Android.

After that, to generate the required server and authentication keys:

$ make -C src keys

or see further instructions in this document. If you want to use ephemeral keying (aka PFS), invoke

$ cd src; ./newdh

before make in order to generate DH parameters before the build. Thats not strictly necessary as of TLS 1.3, since the Kex will most likely chose one of the ECDH variants, but if you customize your setup, it is recommended to generate your own DH params.

Legacy builds

If make detects that TLSv1.3 is not available on the system or TLS_COMPAT_DOWNGRADE is defined, the binaries are built with TLSv1.2 only. This is to allow using it on legacy systems when no other options are available. Obviosuly, the built binaries are not compatible to normal builds, but include full support of all other features.

OpenSSL3 builds

The OpenSSL 3 API is quite different from the OpenSSL-1.1 API. In order to make use of OpenSSL 3, you have to edit Makefile and newdh to reflect your path setup for your OpenSSL install. Invoking newdh is mandatory, unlike for the 1.1 builds. After that you just do make and everything should be the same as with 1.1.

proudly sponsored by:

Run

crash does not need any config or option files to run. Its easy and straight forward to use. Anything can be enabled/disabled by runtime switches:

stealth@linux ~> ./crashd -h

crypted admin shell (C) 2024 Sebastian Krahmer https://github.com/stealth/crash


Usage:  ./crashd [-U] [-q] [-a] [-6] [-D] [-H host] [-p port] [-A auth keys]
         [-k server key-file] [-c server X509 cert] [-L [ip]:port] [-S SNI]
         [-t trigger-file] [-m trigger message] [-e] [-g good IPs] [-N] [-R]
         [-x socks5://[ip]:port] [-G method:prefix:action] [-w]

         -a -- always login if authenticated, despite false/nologin shells
         -U -- run as user (e.g. turn off setuid() calls) if invoked as such
         -e -- extract key and certfile from the binary itself (no -k/-c needed)
         -q -- quiet mode, turns off logging and utmp entries
         -6 -- use IPv6 rather than IPv4
         -w -- setproctitle to `[kthreadd]` (must be last arg!)
         -H -- host to connect to; if omitted: passive connect (default)
         -p -- port to connect to when active connect; default is 2222
         -L -- local [ip]:port used for binding ([0.0.0.0]:2222)
         -g -- file containing list of good IP/IP6's in D/DoS case (default off)
         -A -- authorized-key file for users if starts with '/'; folder inside ~
               containing authorized_keys file otherwise; 'self' means to use
               blob-extraction (see -e); default is .crash
         -k -- servers key file; default is ./serverkey.priv
         -c -- X509 certificate-file that belongs to serverkey (-k);
               default is ./serverkey.pub
         -t -- watch triggerfile for certain message (-m) before connect/listen
         -m -- wait with connect/listen until message in file (-t) is seen
         -N -- disable TCP/UDP port forwarding
         -D -- use DTLS transport (requires -S)
         -x -- use this SOCKS5 proxy when using active connect
         -R -- allow clients to roam sessions
         -G -- Traffic Disguise Filters, check docu
         -S -- SNI to hide behind

Most of it is pretty self-explaining. crashd can run as user. -U lets crashd skip setuid() calls, effectively being able to run as user. In this case, it only accepts logins to that user then by checking login name's uid against current euid. Both, crashc and crashd can use active and passive connects. Whenever a host-argument -H is given, it uses active connect to this host and the belonging port -p. It also accepts -L which specifies the local address and port it has to bind to, either before doing active connect (-H) or passively (no -H given). This way - from TCP point view - client and server role may be reversed, while still having crashd as the shell server. If -w is used it forks itself as [kthreadd] and tries to wrap around its pid to be somewhere around the system daemons. As -w is overwriting main()'s argv array, it must appear last in the option list, otherwise option processing will not work correctly. You can set the process name as TITLE def inside the Makefile.

For testing, when you did make keys (next section), you can just run

src $ ./crashd -U -L [127.0.0.1]:2222

(or omit -L paramater to bind to the default port on any address) and

src $ ./crashc -v -K none -i authkey.priv -H 127.0.0.1 -p 2222 -l $USER

Key setup

Unless you want to use SNI-hiding (see section below), you can type straight ahead:

$ make -C src keys

But you can also do it by hand. To generate a X509 certificate containing the server key:

$ umask 066
$ openssl genrsa -out serverkey.priv 4096
$ openssl req -new -x509 -nodes -sha1 -key serverkey.priv -out serverkey.pub

To extract the public key in a form crashc can use it as a hostkey for comparison:

$ openssl x509 -in serverkey.pub -pubkey -noout > HK_127.0.0.1

So you have HK_127.0.0.1 as the known-hosts keyfile for this host. As an alternative, you can use crashc with -v upon connect to extract the pubkey. But note that this might already be a key presented to you during an attack. So only do that if you know that the connection is not tampered with (e.g. single user on localhost).

Unless you use SNI hiding (see section below), the values you enter for Country-Name, Email, CN etc. do not matter since crashc is not validating the X509. It just compares the public key value it obtained from the server with the key it has in its local key-store belonging to that server (similar to SSH). The server key is not encrypted since crashd is usually started via init scripts. Instead, the key file must have proper permissions so only appropriate users can read it (mode 0600). You can, if you like, also encrypt the server key but then you have to enter a pass-phrase whenever crashd is started.

To generate a public/private RSA keypair for your authentication:

$ openssl genrsa -out authkey.priv -aes256 4096
$ openssl rsa -in authkey.priv -pubout -out authkey.pub

Copy authkey.pub to ~/.crash/authorized_keys on the remote box, and use authkey.priv for the crashc -i argument. Note, that upon authentication you will be asked for the pass-phrase to unlock your private key that is stored locally. The pass-phrase will not travel the network.

Auth-Key sizes larger than 7500 bit must not be used; the tokens do not fit into the auth handshake otherwise.

crashc is using the .crash/ subdir by default to check for already seen server keys. If you connect to a host via -H $host -p $port, a keyfile of form .crash/HK_$host:$port is looked up unless you specify an absolute path to a known keyfile.

Hostkeys

By default, crashc will compare server hostkeys to the local key cache that is found inside the .crash/ subdir of CWD. You may override the path of the cache folder by using the -K switch. For example by using -K ~/.crash/, you use the folder inside your home directory. If the pathname does not end with a slash, it is treated as a filename instead of a directory. If a cache directory is used instead of an filename, each hostkey is expected to be found inside the folder as of the name HK_$HOST:$PORT where $HOST is the -H argument and $PORT the -p argument. If using -v the server hostkey will be printed on stderr and may be pasted to the cache folder into the HK_$HOST:$PORT file.

Hostkey checking may be suppressed by using -K none.

The crash auth protocol incorporates the server host key when signing authentication requests. This way its not strictly necessary to check server host keys as you know it from SSH password authentication. Two things have to be considered if host-key checks are suppressed with -K none though:

  • The user-name will potentially leak to a MiM server

This is not an issue if you use a system user-name such as root.

  • The MiM could sort of phish you, by showing you a fake-shell where you think it belongs to your real server. This could be used to wait for su and similar commands and to record sensitive information as you type on the MiM shell.

To conquer this, you have to make sure you are indeed on your real shell when you see the prompt. This can be achieved by echoing a secret token to the tty upon login, for example via one of the .profile or .bashrc files. As the MiM cannot know this token, you can be sure you have a confidential and untampered session when you see this token upon login; even if you omit the host-key check.

Term setup

As crashc is not transfering env vars to the remote side for a reason, keep in mind that certain stuff is unset, such as $TERM. I.e. if you want to run an editor on the remote shell and started crashc from within an xterm, you have to TERM=xterm vi file in order to have a useful editing session. Likewise for other programs that you expect to work and require specific environment setup.

CGI

crashd automatically detects whether it has been invoked as a CGI by a web-server by checking QUERY_STRING environment variable. It parses and converts the query-string into arguments it understands. It does not translate %2F etc characters! They should not be needed, since spaces, '(' and other weird characters do not make sense when calling crashd. Arguments that don't have a parameter such as -U have to be given =1 argument to enable it, such as in:

http://127.0.0.1/cgi-bin/crashd?-K=/path/to/serverkey.pem&    \
      -C=/path/to/pubkey.x509&-p=1234&-A=/tmp/.crash/authorized_keys&-U=1&-a=1

which invokes crashd on the host 127.0.0.1 as user (probably "wwwrun" or whatever the web-server is running as).

For pen-testing or for emergency case, crashd has the -e option. If -e is used, it extracts the server key-file and the X509 certificate from the ELF binary file, which have to be appended before using -e:

$ cat serverkey.priv>>crashd
$ cat serverkey.pub>>crashd
$ cat authkey.pub>>crashd

The order of appended keys is important.

If you give -A self instead of a valid authentication directory or file, crashd also extracts the user-key used for authentication from its binary. The keys are extracted from the binary at runtime and stored in temp files of pattern /tmp/sshXXXXXX (/data/local/tmp/sshXXXXXX on Android). Make sure to erase them securely upon last login, since they contain private keying material.

This is useful in pen-tests where you cannot upload arbitrary amount of files or you do not know the exact pathname of the upload storage:

$ curl 'http://127.0.0.1/cgi-bin/crashd?-A=self&-U=1&-e=1&-a=1'

-a is needed since most likely the wwwrun user has a /bin/false shell, which -a ignores. crashd is using mkstemp() to store the key files temporarily (just see above), with mode 0444 (world readable) since it needs to access authentication files as user. So be warned that, if you have users, they may read the private key used during SSL handshake. After all, its just an emergency mode. Stripping the crashd binary is not possible after appending the keys, or they will get lost. Back-connect etc. also work in CGI mode as well. If using that, client should use -K switch to tell client which key to use to authenticate the server.

TCP and UDP port forward

crash uses the same network engine as psc. Therefore you may use the same -U and -T parameters as known from psc and which are similar to those of OpenSSH's -L parameter. It will bind to lport and will forward connections to [ip]:rport, initiating the connection from the remote host. The same works for UDP packets, which is not possible with SSH.

If you are interested in messenger proxy setups in copland countries, you can check contrib folder.

SOCKS4 and SOCKS5 support

crash also supports forwarding of TCP connections via SOCKS4 (-4 port) and SOCKS5 (-5 port). This sets up port as SOCKS port for TCP connections, so for instance you can browse remote networks via crashc sessions without the need to open any other connection during a pentest. If you pass -N to crashc, it enables DNS name resolution on the remote side, so you can also use chrome with it. But be warned: There is a privacy problem with browsers that try to resolve a sequence of DNS names upon startup that is not under your control. Also, if your remote side has a broken DNS setup, your typing shell may block for several seconds if DNS reply packets are missing. There are no good async resolver functions which are embeddable and portable so I had to rely on getaddrinfo() in the single thread at the price of possible blockings for several seconds if DNS problems exist. Thats why name resolving has to be enabled explicitly. crashd tries to minimize this potential problem with DNS lookup caches though, so in most situation it should just work painlessly. If you pass -X IP-address (must come before any other proxy argument), you can bind your local proxy to an address different from 127.0.0.1, so you can share the proxy in your local network.

There is also a client side SOCKS5 support available when using crashc with -x.

Proxying based on SNI

In some circumstances you might want to change the endpoint of the proxy session based on a SNI that you receive in the TLS ClientHello. For convenience, crashc integrates support for that by using -Y lport:SNI:[ip]:rport which listens on lport and forwards the given SNI to ip:rport. A fallback of default SNI can be given so that any non-matches or missing SNIs will be forwarded to that destination.

DTLS transport

crash allows to use all of its trickery above also on a DTLS 1.2 transport layer based on UDP. I have added basic flow control and reliability, so you can even xfer files and use port forwarding as with TLS 1.3. The reason for adding DTLS is that some countries have TCP egress filters that only allow incoming connections. It is harder for censors to tell which UDP packets establish an outgoing connection, as there is nothing like a "connection" with UDP. With DTLS sessions, which are established by the -D switch on both sides, a SNI is mandatory. When forwarding UDP ports on DTLS sessions, make sure you will not send UDP payloads larger than 1320 bytes across the sockets, as it is necessary in UDP case to keep enough room for headers and record layer without the need to fragment the packet, as DTLS honors packet boundaries (there is nothing like a stream as in TCP, just datagrams). DTLS mode is still experimental (although working stable) and will switch to DTLS 1.3 as soon as it is implemented widely (DTLS 1.3 RFC was just finished 2022).

Suspend/Resume/Roaming

This is an experimental feature, although working stable.

When using DTLS sessions and crashd is started with -R, you will get the following:

  • transparent roaming of the client sessions - including existing SOCKS connections - which allows to switch underlying physical layer, VPN, Interface, NAT or IP address without even noticing it
  • crashc may be terminated via SIGTERM, so it will dump the session to a ticket file (-t) which can later be resumed from by passing the correct dst IP:port and ticket but w/o the need to authenticate again (no -i) - with full roaming support

In the 2nd case, the ticket file will not be encrypted, so make sure you never leak it. This allows you to switch off your laptop and continue working from elsewhere or even share the ticket to another admin who then continues your session.

One thing is special with regards to bound server ports when using roaming: Due to UDP internals, the next open session for a followup "connect" will be on the next free port in the range of [port, port + 1000] and not on the same port as when using TCP. This needs to be as with roaming we cannot actually call connect() to virtually create a connected tuple, as the next session packet can arrive from anywhere - not just from the originating IP as happens with TCP. So when you start the server with -p 2222 and one roaming session already exists, the next one needs to "connect" to port 2223. If the session at port 2222 is finished (not suspended, but really finished), port 2222 will become available again to the next client.

Suspend/Resume does not work yet with LibreSSL builds, but roaming does.

Mitigating traffic analysis

Traffic analysis mitigation has differant goals:

  • make it hard to find out actual typing sequences and potential info leaks about whats being typed
  • make it hard for a global observer to track connection streams across packet mixes or hubs
  • make it hard for censors to identify/distinguish crash sessions from a set of "legit" connections

It is not possible to reach all three goals at the same time, e.g. you want randomized packet sizes to make it hard for observers to know you are using a crash session, but this will also make your packet stream unique across mixes.

Completely mitigating traffic analysis for a capable (global) observer is very hard. It would require many crash users so to sink all individual packets in a swarm and make it impossible to find patterns that could be used to track individual users across packet mixes. It would also require a fixed packet size for all packets as well as a constant delay between the sends to make all connections look equal. Even then, there's still the problem of the overall amount of traffic sent that may be measured and used to track individuals. As having constant size and delays would make the connection feel slow or even unusable, crash lets you choose between traffic policies which are controlled by -R <level:factor> at client side. Level is an integer with the following meaning:

  • 0: disable all padding of payloads and do not inject random traffic

  • 1: pad payload to rand size up to 1320 byte boundary, no injects

  • 2: pad payload to rand size up to 1320 byte boundary, random injects client side

  • 3: pad payload to rand size up to 1320 byte boundary, random injects with server responses

  • 4: pad payload to the next 256, 512, 1024 or 1320 byte boundary, no injects (default)

  • 5: pad payload to the next 256, 512, 1024 or 1320 byte boundary, random injects client side

  • 6: pad payload to the next 256, 512, 1024 or 1320 byte boundary, random injects with server responses

  • 7: pad payload to 1320 byte boundary, no injects

  • 8: pad payload to 1320 byte boundary, random injects client side

  • 9: pad payload to 1320 byte boundary, random injects with server responses

Factor is a multiply factor 1..100 that adds as many NOP packets per real packet in order to make it harder to match amount of input traffic to output traffic on proxy hosts.

1320 is crashds internally used MSS. The values were chosen in a way so that sent data fits most likely into a single packet. Note however that these are the packet sizes (plus the TLS record size) as it is passed to the TCP stack. TCP will decide itself how it will send the segments. There is no way to enforce 'TCP packet sizes', but this does not matter as the deps to the actual payload size is already blurred.

A higher Level does not automatically mean a better analysis mitigation. You have to chose the best -R <level:factor> depending on your personal needs.

In DTLS mode there are always ping packets in order to implement synchronization and flow control.

If you live in a country with restrictive egress filtering, it may be helpful to test how long connections can survive. Note that due to -4 and -U which allows to proxy TCP and UDP (DNS) to a remote site, crash may be used as a shadowsocks alternative that requires basically no setup and just needs a user-shell behind egress.

If you think that all of this is paranoia, go get some product sheets for devices that detect and classify SSH traffic by behavioral analysis.

Hiding by SNI

By default, the crashd will show a banner upon connect to tell the peer major and minor version numbers. Censorship countries might block addresses which show banners they dislike. To combat this, crash allows for a TLS-only mode that is indistinguishable from a HTTPS session. Just start crashd with -S and give a semi-secret name (Server Name Indicator, SNI). Only clients that also use the correct -S parameter will reach the gate for authentication at all. Other TLS sessions will just be rejected. Note that the SNI travels the network in plain-text and that -S is not meant for authentication. The only reason for SNI hiding is to hide the crash banner from probing/crawling. You may also use SNI proxies such as sshttp to hide crash even deeper and to forward all non-correct SNI connects to some web-site. This way you may hide your server behind neutral web-sites from aggressively probing/blocking censors.

In order for probing to not reveal that you are running crash by checking the X509 certificate details, you should use reasonable values for Country Name, City etc. when asked for it during the make keys process. For instance it would make no sense to setup a pro-regime web-site to hide behind and enter anti-regime values for the X509 specific naming.

Inside the contrib folder you will find a nginx config file that you can integrate into your setup along with comments how you would create a connect from outside to your nginx server in order to have a crash session based on a SNI that you chose.

Disguise Filters

Taking the feature of SNI hiding one step further. Some countries use network data gathered at their border routers to scan destination machines and check whether the content or software there could pose a threat to their leaders. It is therefore not good to always tell anyone openly that a crashd is running on a certain port, even if the peer shows up with the right SNI, as the SNI could have been sniffed by a global observer. Entering Disguise Filters.

Upon connect, you have to show up with a correct (pre-)secret in order to start a crash session. This can't be known by an observer as its hidden inside the TLS stream (unlike the SNI). If the secret is not correct, crashd disguises as another - innocent looking - software.

Currently, there is only one Disguise Filter, redirect1, which masks as a web server sending a redirect of your choice. Disguise Filters always also require -S:

$ ./crashd -L [0.0.0.0]:4433 -c serverkey.pub -k serverkey.priv \
   -G redirect1:mydirtysecret:https://www.ccc.de -S localhost

So only those who know can start a shell session:

$ ./crashc -H 127.0.0.1 -p 4433 -l stealth -i authkey.priv -S localhost -G mydirtysecret

All others, e.g. curl https://localhost:4433 -k -v -L will be redirected to https://www.ccc.de.

(where localhost was just chosen for testing to make curl have the right SNI) When a Disguise Filter is triggered, you will see it in the logs. This also allows admins to have shell servers reachable from outside which just map to the legit web server when not prompted with the correct (pre-) secret. For sure; for a disguise to work against censors with a large dick, your story has to be perfect, i.e. the CNs etc. of the certificate have to look legit, even better signed by a legit CA and the redirect has to look reasonable.

File up/download

Although there is nothing like sftp for crash, it may be used for file up/downloads.

In order to upload a file:

~ $ crashc -H host -i authkey.priv -l root -c 'dd of=/path/on/remote status=progress' < local.file

Or to download a file:

~ $ crashc -H host -i authkey.priv -l root -c 'dd if=/path/on/remote status=progress' > local.file

Note that in the download case you must not specify the -v switch since this would add the verbose output to the local.file. For -c commands, crash will forward stdout and stderr separated to the local tty's fd 1 and 2, so above commands add a nice progress bar during the xfer.

MTU/MSS

crash is assuming a MTU of 1500 and using a MSS of 1320, so that TLS record layer and some other meta data fits into this MTU and even into network devices with smaller MTU ~1400, which should fit with most VPN setups etc.. If you are using DTLS mode (that is UDP) and a VPN or whatever with a much smaller MTU, you might want to compile crash with lower values which you can change in misc.h. If you are using TCP, i.e. not using the -D switch, these values do not matter for you.

DoS mitigation

crashd includes some sort of D/DoS protection. Only one connection per second is allowed per IP, except if the IP is listed (or the network it belongs to) in a good-IP file given with -g at startup. Per default no good IPs are assigned. Network-address-goodness only works with IPv4 yet. A simple good-IP file may look like this:

# sample good-IP file
192.168.3.1
192.168.2.0
10.0.0.0
fe80:216::1234
# end of file

Together with the interval timer for hanging un-authenticated connections this allows to have no more than 12 'hanging' crashd's at the same time, still allowing you to login if you are listed in good-IPs and your underlying TCP/IP stack is not already trashed.