Releases: staxrip/staxrip
StaxRip v2.44.0
Important
I highly recommend starting with new settings and templates as VapourSynth and many encoder related parameters have changed and might break your configurations that have to be renewed. Otherwise check your profiles and templates, fix them if necessary and don't forget to save them again. 😉
Note
Special thanks to all supporters, especially the few Patreon members, who have been instrumental in making this version available! ❤️
This is the last release for 2024!
Thank you for using StaxRip, for reporting issues, for requesting features as well as for supporting StaxRip and keeping it alive. ❤️
Merry Christmas and a happy new year! See you in 2025.... 🎆✨
And just in case any of your friends or family still needs a gift for you: 🎄🎅 😉
Changelog:
- Audio: Add "Center/Speech Optimized Stereo" option
- Audio: Demux audio even if all tracks are set to "No Audio" (#1529)
- Audio: Fix broken audio file addition of demuxed files under some circumstances
- Audio: Fix Normalize (#1484)
- Audio: Improve Normalize
- Macro: Fix %encoder_codec% is not shown on Macro List
- MP4Box: Add custom switches for video tracks (#1532)
- MP4Box: Add "Better Seeking" general preset (#1535)
- NVEncC: Add new value "libplacebo" for "--vpp-resize" parameter
- NVEncC: Adjust default values for "--vpp-ngx-truehdr" parameter
- NVEncC: Always show "--vbr-quality" parameter in VBR mode
- NVEncC: Remove parameters "--level", "--profile" and "--tier" for AV1 codec (#1534)
- Rav1e: Fix 2-pass execution (#1531)
- Rav1e: Fix bitrate not being synced with main window
- Rav1e: Reorganize options
- SvtAv1EncApp: Set default value for "--chroma-qm-min" to 8
- SvtAv1EncApp: Adjust default value for "--hierarchical-levels" (#1546)
- SvtAv1EncApp: Add value "2" to "--fast-decode" parameter
- SvtAv1EncApp: Add "--noise-norm-strength" parameter
- SvtAv1EncApp: Add "--kf-tf-strength" parameter
- SvtAv1EncApp: Rename "Logical Processors" to "Level Of Parallelism"
- x265: Fix overwriting of set up VBV values when loading a source file (#1539)
- x265: Adjust new default values for Medium Preset
- x265: Fix default value for "--limit-tu" for VerySlow Preset
- x265: Remove deprecated parameters (#1544)
- Update tools
- aomenc v3.11.0-145-gc1bcb109d4-x64-msvc1942
- DoVi_Tool v2.1.3
- FFmpeg v7.2-dev-N-118074-x64-gcc14.2.0
- HDR10Plus_Tool v1.6.1
- MediaInfo v24.12
- MKVToolNix v88.0
- MP4Box v2.5-DEV-rev964-ga3c626300-x64-msvc1942
- NVEncC v7.77
- Python v3.12.7
- qaac v2.83
- QSVEncC v7.75
- rav1e v0.7.0 (p20241015)-x64-msvc1942
- Subtitle Edit v4.0.8
- SvtAv1EncApp v2.3.0-1+12-7ae833c2-.Mod-by-Patman.-x64-msvc1942 [SVT-AV1-PSY]
- VapourSynth R70
- VCEEncC v8.24
- vvencFFapp v1.13.0 r295-0c2c21e
- x264 v0.164.3198+7-bf259fa-.Mod-by-Patman.-x64-gcc14.2.0
- x265 v4.1+54+9-0c07fe364-.Mod-by-Patman.-x64-avx2-msvc1942
- Update AviSynth+ plugins
- DePan v2.7.46
- DePanEstimate v2.7.46
- MVTools2 v2.7.46
- Update Dual plugins
- BestSource R8
- Update VapourSynth plugins
- AVISource R1
Tip
If you want to keep StaxRip alive, support its development, get early access to new releases or just say thanks, please consider visiting:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc:
StaxRip v2.42.2 [Update]
Important
This is an update for v2.42.0 (and all its updates) and you need to download it first if not already done!
This update is 100% compatible with all prior v2.42.x versions! You just need to extract and overwrite the existing files.
Note
Special thanks to all supporters, especially the few Patreon members, who have been instrumental in making this version available! ❤️
Changelog:
- General: Add file extension to temp folder name
- General: Add file extension to log file when saved next to source file
- Macro: Add new macro %encoder_codec% (#1520)
- UI: Fix removing of last path separator from paths (#1491)
- UI: Fix not showing error messages on indexing (#1514)
- UI: Show crop values on main window (#1521)
- UI: Fix Demux Dialog ignores selection of audio and subtitle streams (#1502)
- FFmpeg: Fix ProRes Profile option (#1523)
- NVEncC: Fix parameters "--qp-init", "--qp-min" and "--qp-max"
- QSVEncC: Fix parameters "--qp-min" and "--qp-max"
- SvtAv1EncApp: Fix passing wrong width and height values to the encoder when filters changed the size
- VCEEncC: Add, fix and alter various parameters (#1486)
Tip
If you want to keep StaxRip alive, support its development or just say thanks, please consider visiting:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc:
StaxRip v2.42.1 [Update]
Important
This is an update for v2.42.0 only (including its updates) and you need to download it first if not already done!
This update is 100% compatible with its main release and its prior updates! You just need to extract and overwrite the existing files.
Changelog:
- UI: Fix Demuxing Subtitles for ffmpeg (#1466)
- UI: Fix not saving log files (#1467)
- UI: Fix no time display on Crop window (#1470)
- UI: Disable Window Dark Mode when system colors are used (#1470)
- UI: Fix Demux handling for subtitles (#1471)
- NVEncC: Fix incompatible output file type for AV1 encodes
- QSVEncC: Fix incompatible output file type for AV1 encodes
- VCEEncC: Fix incompatible output file type for AV1 encodes
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
StaxRip v2.42.0
Note
Among many, many changes you can find listed below, it's time for a "little" game changer. After an incredible amount of hours of back and forth the number of audio tracks is optional now, with a default number of six. 💪🥳 Because of so many different factors the Main window does currently not change its size automatically when you change the number of audio tracks. Therefore the Main window is sizable now (within some limits) which offers some other benefits. In this context the whole audio file and stream insertion and recognition was also altered, which leads to a better, but maybe different, handling than you were used to.
The optional number of audio tracks was very challenging to integrate into the existing environment, but I am very sure, that it works wonderful finally. Nevertheless I am also sure that I could not have tested all workflow cases and exceptions. So please pay attention and report any issue.
The Auto Crop process has also been improved and extended a lot, so there are some new parameters to define what you want to consider to be cropped. The default values should be fine for almost all cases, but feel free to tweak them for your needs. 🤝
For everything else check the Changelog below.
Many thanks to everybody, who helped testing during the development stages as well as @Patman86 for his binaries. Special thanks to the few supporters for their support and kind words!
Important
It is highly recommended to start with new/fresh settings, especially because of the change in audio handling! You can avoid unwanted side effects by not using or copying your old settings over.
Changelog:
- UI: Add support for Dark Mode Window Mode (#1448)
- UI: Enlarge Settings window
- UI: Enlarge Options window
- UI: Extend main window and make it resizeable
- UI: Make number of audio tracks on main window optional
- UI: Re-implement audio track detection and reordering
- UI: Add menu items to Crop window to jump to a specific time and frame (#1421)
- UI: Fix THD+AC3 Output selection on eac3to window
- UI: Add "Execute All" to Audio Tracks (#1123)
- UI: Improve Dolby Vision Profile 5 metadata import when no VUI metadata available
- UI: Fix Demux for user selected subtitles
- UI: Ignore existing video files in temp directory created by Compressibility Check when opening source file again
- UI: Add new event "After Source Opened"
- Which is triggered at the end before validation of the scripts. After the validation the existing "After Source Loaded" triggers
- UI: Fix Indexing for LWLibav
- UI: Make Indexing cancelable
- UI: Add new macros (#1431)
- %hdr10plus_path%, %hdrdv_path%
- UI: Enable the "Subtitle Edit" button on muxer configuration for all subtitles
- UI: Fix Audio conversion ignoring Normalize and Gain in some cases
- UI: Fix Assistant blocking message on cutting without a Dolby Vision metadata file path set (#1454)
- UI: Add "ImportVideoEncoderCommandLineFromTextFile" command
- UI: Improve Command Line Import
- UI: Improve handling/demuxing with attachments
- UI: Add support for covers with jpeg file extension (#1233)
- UI: Fix crash on Crop window opening under some circumstances (#1462)
- Crop: Make AutoCrop process skippable (#1411)
- Crop: Add Frame Interval Selection Mode
- Crop: Add Frame Consideration Mode to Options (#1386)
- Makes it able to handle intros and outros that are not cropped
- Crop: Add Luminance Threshold
- Lets the user set the max brightness of a line, that is considered to be cropped
- Crop: Improve Automatic Mode for Dolby Vision sources
- FFmpeg: Add "-movflags +faststart" to muxer command where possible (#1408)
- MP4Box: Add "Streaming" command line menu preset (#1408)
- NVEncC: Add options "RGB" and "YUVA420" to parameter "--output-csp"
- NVEncC: Fix incompatible output file type for AV1 encodes
- NVEncC: Make Dolby Vision related parameters available for AV1
- Qaac: Add "--no-delay" parameter (#1410)
- QSVEncC: Fix incompatible output file type for AV1 encodes
- QSVEncC: Add "--output-csp" parameter
- SvtAv1EncApp: Fix "--qp" parameter for non Psy versions
- SvtAv1EncApp: Fix "--qp-max" parameter
- SvtAv1EncApp: Add "--tf-strength" parameter
- SvtAv1EncApp: Add "--chroma-qm-min" parameter
- SvtAv1EncApp: Add "--chroma-qm-max" parameter
- SvtAv1EncApp: Add "--tune 4" option
- VCEEncC: Add "--vpp-decomb" parameter (#1444)
- VCEEncC: Add "--vpp-fft3d" parameter (#1444)
- VCEEncC: Add "--vpp-nlmeans" parameter (#1444)
- VCEEncC: Add "--atc-sei" parameter (#1444)
- VCEEncC: Add "--chromaloc" parameter (#1444)
- VCEEncC: Add "--colorrange" parameter (#1444)
- VCEEncC: Add "--master-display" parameter (#1444)
- VCEEncC: Add "--max-cll" parameter (#1444)
- VCEEncC: Fix "--pa" parameter (#1444)
- VCEEncC: Fix "--preset" parameter (#1444)
- VCEEncC: Fix mode options across all codecs (#1444)
- VCEEncC: Fix incompatible output file type for AV1 encodes
- x265: Fix "--aq-mode" default value across different presets
- x265: Add "--alpha" parameter
- x265: Add "--format" parameter
- x265: Add "--scc" parameter
- Update tools
- aomenc v3.9.1-419-g9ed60cc5ff-x64-msvc1940
- AutoCrop v2.5
- DoVi_Tool v2.1.2
- eac3to v3.52
- ffmpeg N-116758-x64-gcc14.2.0
- MediaInfo v24.04
- MKVToolNix v86.0
- Mp4Box v2.5-DEV-rev479-gd7e1a5c15-x64-msvc1940
- NVEncC v7.65
- QSVEncC v7.69
- rav1e v0.7.0 (p20240612-5-g7ab0de1)-x64-msvc1940
- Subtitle Edit v4.0.7
- SvtAv1EncApp v2.2.1-0+1-e6255481-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
- VCEEncC v8.23
- vvencFFapp v1.12.0 r245-efb49f4
- x265 v3.6+85+1-b5cacb584-.Mod-by-Patman.-x64-avx2-msvc1940
- Update AviSynth+ plugins
- AvsResize R25
- Update Dual plugins
- BestSource R6
- Update VapourSynth plugins
- Curve r3
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Contributors
Assets 3
StaxRip v2.41.7
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Changelog:
v2.41.7 (2024-07-09)
- UI: Fix applying of wrong/default theme when selecting existing folder on first start (#1418)
- UI: Fix script files being also deleted when Video file types are selected
- UI: Fix crash on typing in invalid characters to the target file name
- NVEncC: Add new "--vpp-ngx-truehdr" parameter
- NVEncC: Fix crash when activating "Resize"
v2.41.6 (2024-07-03)
- UI: Fix "--normalize" and "--gain" are used for qaac at the same time when Pipe is used (#1410)
- Internal: Fix crash on demuxing command without loaded project
- Internal: Fix rare crash when closing Processing window right before closing StaxRip (#1414)
- Internal: Raise event "Before Job Adding" also when adding a batch job (#1407)
- Internal: Improve valid Dolby Vision metadata recognition for extraction (#1409)
- NVEncC: Add new "--vpp-fft3d" parameter
- NVEncC: Add new value "ngx-vsr" for "--vpp-resize" parameter
- x264: Add "--aq-bias-strength" parameter (#1412)
- Update tools
- MediaInfo v24.06
- NVEncC v7.57
- QSVEncC v7.67
- vvencFFapp v1.12.0 r236-d57c73d
v2.41.5 (2024-06-23)
- UI: Fix tolerances to Frame Mismatch for temp files deletion (#1400)
- Update tools
- MKVToolNix v85.0
- OpusEnc v0.2-34-g98f3ddc (using libopus 1.5.2-11-g2554a89)
- SvtAv1EncApp v2.1.0-A-1+6-adc3da7b-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
v2.41.4 (not published)
- UI: Add tolerances to Frame Mismatch when it comes to delete temp files (#1400)
- There are rare cases where an encoder or muxer might add a few frames to the final file
- SvtAv1EncApp: Fix default value for "--enable-variance-boost" (#1405)
v2.41.3 (not published)
- UI: Remove VP9 as supported extension for mkvmerge (mkv and webm)
- QSVEncC: Fix VP9 encoding
v2.41.2 (2024-06-21)
- UI: Add VP9 as supported extension for mkvmerge (mkv and webm)
- Internal: Fix package dependencies (#1401)
v2.41.1 (not published)
- SvtAv1EncApp: Fix Variance Boost parameters (#1398)
- SvtAv1EncApp: Fix "--adaptive-film-grain" parameters default value (#1398)
v2.41.0 (2024-06-16)
- Crop: Improve Automatic Dolby Vision Auto Crop mode
- QSVEncC: Add new "--vpp-fft3d" parameter
- SvtAv1EncApp: Add new "--adaptive-film-grain" parameter [PSY]
- SvtAv1EncApp: Add new "--hdr10plus-json" parameter [PSY]
- SvtAv1EncApp: Add new "--max-32-tx-size" parameter [PSY]
- SvtAv1EncApp: Add HDR10+ JSON file importation to VUI metadata import
- SvtAv1EncApp: Fix VUI metadata import
- VapourSynth: Fix wrong loading order of dependencies under some circumstances
- Update tools
- AOMEnc v3.9.1-227-g49c02efb61-x64-msvc1940
- DGMPGDec v3.0.0.0
- ffmpeg N-115847-g7c95c7de4a-x64-gcc14.1.0
- Mp4Box v2.5-DEV-rev273-gf2ce8bf1d-x64-msvc1940
- QSVEncC v7.66
- rav1e v0.7.0 (p20240612)-x64-gcc14.1.0
- SvtAv1EncApp v2.1.0-A-1+4-52522a1a-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
Note
This is an extension for StaxRip v2.41.0. If you have already downloaded or running v2.41.x, you just need to download and replace the (extracted) files from the UPDATE archive..
StaxRip v2.41.6
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Changelog:
v2.41.6 (2024-07-03)
- UI: Fix "--normalize" and "--gain" are used for qaac at the same time when Pipe is used (#1410)
- Internal: Fix crash on demuxing command without loaded project
- Internal: Fix rare crash when closing Processing window right before closing StaxRip (#1414)
- Internal: Raise event "Before Job Adding" also when adding a batch job (#1407)
- Internal: Improve valid Dolby Vision metadata recognition for extraction (#1409)
- NVEncC: Add new "--vpp-fft3d" parameter
- NVEncC: Add new value "ngx-vsr" for "--vpp-resize" parameter
- x264: Add "--aq-bias-strength" parameter (#1412)
- Update tools
- MediaInfo v24.06
- NVEncC v7.57
- QSVEncC v7.67
- vvencFFapp v1.12.0 r236-d57c73d
v2.41.5 (2024-06-23)
- UI: Fix tolerances to Frame Mismatch for temp files deletion (#1400)
- Update tools
- MKVToolNix v85.0
- OpusEnc v0.2-34-g98f3ddc (using libopus 1.5.2-11-g2554a89)
- SvtAv1EncApp v2.1.0-A-1+6-adc3da7b-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
v2.41.4 (not published)
- UI: Add tolerances to Frame Mismatch when it comes to delete temp files (#1400)
- There are rare cases where an encoder or muxer might add a few frames to the final file
- SvtAv1EncApp: Fix default value for "--enable-variance-boost" (#1405)
v2.41.3 (not published)
- UI: Remove VP9 as supported extension for mkvmerge (mkv and webm)
- QSVEncC: Fix VP9 encoding
v2.41.2 (2024-06-21)
- UI: Add VP9 as supported extension for mkvmerge (mkv and webm)
- Internal: Fix package dependencies (#1401)
v2.41.1 (not published)
- SvtAv1EncApp: Fix Variance Boost parameters (#1398)
- SvtAv1EncApp: Fix "--adaptive-film-grain" parameters default value (#1398)
v2.41.0 (2024-06-16)
- Crop: Improve Automatic Dolby Vision Auto Crop mode
- QSVEncC: Add new "--vpp-fft3d" parameter
- SvtAv1EncApp: Add new "--adaptive-film-grain" parameter [PSY]
- SvtAv1EncApp: Add new "--hdr10plus-json" parameter [PSY]
- SvtAv1EncApp: Add new "--max-32-tx-size" parameter [PSY]
- SvtAv1EncApp: Add HDR10+ JSON file importation to VUI metadata import
- SvtAv1EncApp: Fix VUI metadata import
- VapourSynth: Fix wrong loading order of dependencies under some circumstances
- Update tools
- AOMEnc v3.9.1-227-g49c02efb61-x64-msvc1940
- DGMPGDec v3.0.0.0
- ffmpeg N-115847-g7c95c7de4a-x64-gcc14.1.0
- Mp4Box v2.5-DEV-rev273-gf2ce8bf1d-x64-msvc1940
- QSVEncC v7.66
- rav1e v0.7.0 (p20240612)-x64-gcc14.1.0
- SvtAv1EncApp v2.1.0-A-1+4-52522a1a-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
Note
This is an extension for StaxRip v2.41.0. If you have already downloaded or running v2.41.x, you just need to download and replace the (extracted) files from the UPDATE archive..
StaxRip v2.41.5
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Note
This is an extension for StaxRip v2.41.0. If you have already downloaded or running v2.41.x, you just need to download and replace the (extracted) files from the UPDATE archive..
Changelog:
v2.41.5 (2024-06-23)
- UI: Fix tolerances to Frame Mismatch for temp files deletion (#1400)
- Update tools
- MKVToolNix v85.0
- OpusEnc v0.2-34-g98f3ddc (using libopus 1.5.2-11-g2554a89)
- SvtAv1EncApp v2.1.0-A-1+6-adc3da7b-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
v2.41.4 (not published)
- UI: Add tolerances to Frame Mismatch when it comes to delete temp files (#1400)
- There are rare cases where an encoder or muxer might add a few frames to the final file
- SvtAv1EncApp: Fix default value for "--enable-variance-boost" (#1405)
v2.41.3 (not published)
- UI: Remove VP9 as supported extension for mkvmerge (mkv and webm)
- QSVEncC: Fix VP9 encoding
v2.41.2 (2024-06-21)
- UI: Add VP9 as supported extension for mkvmerge (mkv and webm)
- Internal: Fix package dependencies (#1401)
v2.41.1 (not published)
- SvtAv1EncApp: Fix Variance Boost parameters (#1398)
- SvtAv1EncApp: Fix "--adaptive-film-grain" parameters default value (#1398)
v2.41.0 (2024-06-16)
- Crop: Improve Automatic Dolby Vision Auto Crop mode
- QSVEncC: Add new "--vpp-fft3d" parameter
- SvtAv1EncApp: Add new "--adaptive-film-grain" parameter [PSY]
- SvtAv1EncApp: Add new "--hdr10plus-json" parameter [PSY]
- SvtAv1EncApp: Add new "--max-32-tx-size" parameter [PSY]
- SvtAv1EncApp: Add HDR10+ JSON file importation to VUI metadata import
- SvtAv1EncApp: Fix VUI metadata import
- VapourSynth: Fix wrong loading order of dependencies under some circumstances
- Update tools
- AOMEnc v3.9.1-227-g49c02efb61-x64-msvc1940
- DGMPGDec v3.0.0.0
- ffmpeg N-115847-g7c95c7de4a-x64-gcc14.1.0
- Mp4Box v2.5-DEV-rev273-gf2ce8bf1d-x64-msvc1940
- QSVEncC v7.66
- rav1e v0.7.0 (p20240612)-x64-gcc14.1.0
- SvtAv1EncApp v2.1.0-A-1+4-52522a1a-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
StaxRip v2.41.2
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Note
This is an extension for StaxRip v2.41.0. If you have already downloaded or running v2.41.x, you just need to download and replace the (extracted) files from the EXE-ONLY archive..
Changelog:
v2.41.2 (2024-06-21)
- UI: Add VP9 as supported extension for mkvmerge (mkv and webm)
- Internal: Fix package dependencies (#1401)
v2.41.1 (not published)
- SvtAv1EncApp: Fix Variance Boost parameters (#1398)
- SvtAv1EncApp: Fix "--adaptive-film-grain" parameters default value (#1398)
v2.41.0 (2024-06-16)
- Crop: Improve Automatic Dolby Vision Auto Crop mode
- QSVEncC: Add new "--vpp-fft3d" parameter
- SvtAv1EncApp: Add new "--adaptive-film-grain" parameter [PSY]
- SvtAv1EncApp: Add new "--hdr10plus-json" parameter [PSY]
- SvtAv1EncApp: Add new "--max-32-tx-size" parameter [PSY]
- SvtAv1EncApp: Add HDR10+ JSON file importation to VUI metadata import
- SvtAv1EncApp: Fix VUI metadata import
- VapourSynth: Fix wrong loading order of dependencies under some circumstances
- Update tools
- AOMEnc v3.9.1-227-g49c02efb61-x64-msvc1940
- DGMPGDec v3.0.0.0
- ffmpeg N-115847-g7c95c7de4a-x64-gcc14.1.0
- Mp4Box v2.5-DEV-rev273-gf2ce8bf1d-x64-msvc1940
- QSVEncC v7.66
- rav1e v0.7.0 (p20240612)-x64-gcc14.1.0
- SvtAv1EncApp v2.1.0-A-1+4-52522a1a-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
StaxRip v2.41.0
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Note
This release is basically compatible with v2.40, meaning you can should be able to use your setting/templates from v2.40, but take care especially when it comes to QSVEncC and SvtAv1EncApp related settings.
Changelog:
- Crop: Improve Automatic Dolby Vision Auto Crop mode
- QSVEncC: Add new "--vpp-fft3d" parameter
- SvtAv1EncApp: Add new "--adaptive-film-grain" parameter [PSY]
- SvtAv1EncApp: Add new "--hdr10plus-json" parameter [PSY]
- SvtAv1EncApp: Add new "--max-32-tx-size" parameter [PSY]
- SvtAv1EncApp: Add HDR10+ JSON file importation to VUI metadata import
- SvtAv1EncApp: Fix VUI metadata import
- VapourSynth: Fix wrong loading order of dependencies under some circumstances
- Internal: Fix path handling when passed to StaxRip as parameter value via command line (#1390)
- Internal: Fix package dependencies
- Update tools
- AOMEnc v3.9.1-227-g49c02efb61-x64-msvc1940
- DGMPGDec v3.0.0.0
- ffmpeg N-115847-g7c95c7de4a-x64-gcc14.1.0
- Mp4Box v2.5-DEV-rev273-gf2ce8bf1d-x64-msvc1940
- QSVEncC v7.66
- rav1e v0.7.0 (p20240612)-x64-gcc14.1.0
- SvtAv1EncApp v2.1.0-A-1+4-52522a1a-.Mod-by-Patman.-x64-msvc1940 [SVT-AV1-PSY]
Special thanks to @Patman86 for updating the tools.
Contributors
Assets 3
StaxRip v2.40.0
Tip
If you want to support StaxRip and keep it alive:
Join our community on Discord for help, talks, polls, information about oncoming releases, etc.
Changelog:
- UI: Fix path handling when passed to StaxRip via command line (#1375, #1377, #1378)
- UI: Fix blocking script error messages during job proceeding (#1231)
- UI: Add question when adding an existing and active job with similar project file path
- UI: Add new event "Before Job Adding" (#1346)
- UI: Add new event "After Job Added"
- UI: Add setting for frame number position on file names when saving images (#1373)
- UI: Improve Progress Highlighting
- Crop: Move AutoCrop settings from Settings to Project Options
- Crop: Add new "Time Interval" mode for AutoCrop
- Analyzes a frame every x seconds, which makes it more useful throughout short and long videos
- VideoComparison: Run indexing of source files as (visible) task/job (#1226)
- Internal: Skip importing of scripts that are used by commented out functions (thanks to @Valdiralita (#1318))
- NVEncC: Add new "--vpp-decomb" parameter
- QSVEncC: Add new "--vpp-decomb" parameter
- SvtAv1EncApp: Add long path support (#1374)
- Update tools
- AutoCrop v2.4
- MediaInfo v24.05
- MKVToolNix v84.0
- NVEncC v7.54
- QSVEncC v7.65
- Subtitle Edit v4.0.6
- SvtAv1EncApp v2.1.0-1+1-8ba1c70f-.Mod-by-Patman.-x64-msvc1939 [SVT-AV1-PSY]
- vvencFFapp v1.11.1 r227-77574c
- x264 v0.164.3191+1-e3de8e8-.Mod-by-Patman.-x64-gcc14.1.0
- x265 v3.6+13+1-726aec126-.Mod-by-Patman.-x64-avx2-msvc1939
- Update Dual plugins
- BestSource R5
- ffms2 v5.0
