A collection of footprints, symbols, and 3D models for building mechanical keyboards with Kicad.

1. Add a SCOTTOKEEBS_KICAD path to match where the ScottoKicad folder is located.

2. Add the symbol library.

3. Add the footprint libraries.

4. That's it, you should now have everything you need!

• 18x17mm (Choc)
  • 1.00u - X: 18, Y:17
  • 0.50u - X: 9, Y: 8.5
  • 0.25u - X: 4.5, Y: 4.25
• 19.05x19.05 (MX/Alps)
  • 1.00u - X: 19.05, Y: 19.05
  • 0.50u - X: 9.525, Y: 9.525
  • 0.25u X: 4.7625, Y: 4.7625

• Add (A) - Add a footprint or symbol.
• Set Origin Point (S) - Set where everything else will move in relation to.
• Move with Reference (]) - Move a footprint with a reference point.
• Track Tool (X) - Place traces
• Add Via (V) - Place a via to run a trace between PCB layers.
• Flip (F) - Switch footprint between back and front of the PCB.

Please refer to each library in order to understand the license it uses, most are Creative Commons CC-BY-SA 4.0.

• Keyswitch Library - 3D models and footprints for switches, stabilizers, and sockets.
• Raspberry Pi Pico - 3D model, footprint, and symbol.
• Arduino Pro Micro - Footprint and symbol.
• Marbastlib - Symbols.
• Kleeb - 3D models, symbols, and footprints.
• Keebio - 3D models, footprints, and symbols.
• Adafruit - 3D models

Feel free to reach out to me on Discord if you want to help get a component into the library.

• nice!nano - Base dimensions and placement by @Knotherface, can be found on GitHub as Leopere.