Compiler flags: -O3 -Wfatal-errors -Wall -std=c11
An implementation of the ISO15765-2 (ISO-TP) protocol in a platform agnostic C library. The library interacts in a transparent way with the lower ISO layers which means that the user must define the connection for the reception and the transmission of the CANBus frames. In this way you have a complete control and reusability of this library in different platforms. This library can support UDS, OBDII and any other application layer protocol that requires ISO15765-2 TP.
This ISO defines common requirements for vehicle diagnostic systems implemented on a Controller Area Network (CAN) communication link, as specified in ISO 11898. Although primarily intended for diagnostic systems, it also meets requirements from other CAN-based systems needing a network layer protocol.
- Include the header file
iso15765_2.h - Define an
iso15765_thandler, create and attach the required shim/callbacks (send_frameon_errorget_ms) of the handler
/* Required shim/callback functions */
static uint8_t send_frame(cbus_id_type id_type, uint32_t id, cbus_fr_format fr_fmt, uint8_t dlc, uint8_t* dt);
static void usdata_indication(n_indn_t* info);
static void on_error(n_rslt err_type);
static uint32_t getms();
/* ISOTP handler */
static iso15765_t handler =
{
.addr_md = N_ADM_FIXED, // Selected address mode of the TP
.fr_id_type = CBUS_ID_T_EXTENDED, // CANBus frame type
.config.stmin = 0x05, // Default min. frame transmission separation
.config.bs = 0x0F, // Maximun size of the block sequence
.config.n_bs = 800, // Time until reception of the next FlowControl N_PDU
.config.n_cr = 250, // Time until reception of the next ConsecutiveFrame N_PDU
.clbs.get_ms = getms, // Time-source for the library in ms(required)
.clbs.on_error = on_error, // Callback which will be executed in any occured error.
.clbs.send_frame = send_frame, // This callback will be fired when a transmission of a canbus frame is ready.
.clbs.indn = usdata_indication // Indication Callback: Will be fired when a reception
// is available or an error occured during the reception.
};
static uint8_t send_frame(cbus_id_type id_type, uint32_t id, cbus_fr_format fr_fmt, uint8_t dlc, uint8_t* dt)
{
// Here transmit the frame through CANBus
return 0;
}
static void usdata_indication(n_indn_t* info)
{
// Use the incoming message. This function should be fired by the library when a new complete message arrives.
}
static void on_error(n_rslt err_type)
{
// Check the errors etc..
}
static uint32_t getms()
{
// return time in ms;
// ex. return GetTickCount();
}-
In your main, first initialize the iso15765_t handler
iso15765_init(&handler); -
To send a message, create a
n_req_tand use the functioniso15765_send. For example:
n_req_t frame =
{
.n_ai.n_pr = 0x06, // Network Address Priority
.n_ai.n_sa = 0x01, // Network Source Address
.n_ai.n_ta = 0x02, // Network Target Address
.n_ai.n_ae = 0x00, // Network Address Extension
.n_ai.n_tt = N_TA_T_PHY, // Network Target Address type
.fr_fmt = CBUS_FR_FRM_STD, // CANFD or CANSTD
.msg = {1,2,3,4,5,6,7,8, // Message
9,10,11,12,13,14,
15,16,17,18,19,20},
.msg_sz = 20, // Message size
};
...
iso15765_send(&handler, &frame);- To push an incoming frame to the library use the function
iso15765_enqueue(&handler, &frame);. It is suggested to put this function inside the frame reception callback of your interface - Use the
iso15765_process(&handler);to allow the library to process the in/out streams of data. Normally you could put this function in a thread to run continuously. - As described before, any new/completed incoming message should be handled in the callback
static void usdata_indication(indn_t* info)
Below is a complete loopback example. The service send a message to itself by enqueing the transmitted frame in the inbound stream.
#include <stdio.h>
#include <stdlib.h>
#include "iso15765_2.h"
#include <windows.h>
#include <sysinfoapi.h>
/******************************************************************************
* Declaration | Static Functions
******************************************************************************/
static uint8_t send_frame(canbus_md md, uint32_t id, uint8_t dlc, uint8_t* dt);
static void on_error(n_rslt err_type);
static uint32_t getms();
/******************************************************************************
* Enumerations, structures & Variables
******************************************************************************/
static iso15765_t handler =
{
.addr_md = N_ADM_FIXED,
.fr_id_type = CBUS_ID_T_EXTENDED,
.clbs.send_frame = send_frame1,
.clbs.on_error = on_error,
.clbs.get_ms = getms,
.clbs.indn = indn1,
.config.stmin = 0x3,
.config.bs = 0x0f,
.config.n_bs = 100,
.config.n_cr = 3
};
n_req_t frame =
{
.n_ai.n_pr = 0x07,
.n_ai.n_sa = 0x01,
.n_ai.n_ta = 0x02,
.n_ai.n_ae = 0x00,
.n_ai.n_tt = N_TA_T_PHY,
.fr_fmt = CBUS_FR_FRM_FD,
.msg = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23},
.msg_sz = 23,
};
/******************************************************************************
* Definition | Static Functions
******************************************************************************/
static uint32_t getms()
{
return GetTickCount();
}
static uint8_t send_frame(cbus_id_type id_type, uint32_t id, cbus_fr_format fr_fmt, uint8_t dlc, uint8_t* dt)
{
printf("%d #1# - id:%x dlc:%02x ",GetTickCount(), id, dlc);
for (int i = 0; i < 8; i++) printf("%02x ", dt[i]);
printf("\n");
canbus_frame_t frame = { .id = id, .dlc = dlc, .id_type = id_type, .fr_format= fr_fmt };
memmove(frame.dt, dt, dlc);
iso15765_enqueue(&handler, &frame);
return 0;
}
static void on_error(n_rslt err_type)
{
printf("ERROR OCCURED!:%d", err_type);
}
/******************************************************************************
* Definition | Public Functions
******************************************************************************/
int main()
{
iso15765_init(&handler);
iso15765_send(&handler, &frame);
while(1)
{
iso15765_process(&handler);
Sleep(5);
}
return 0;
}Please check the folder exm for more examples
This library is experimental and is still under development. The purpose is to create a complete ISO15765 library with all the described features. Feel free to suggest anything. If you use this library please ref.
We would love you to contribute to iso15765-canbus, pull requests are welcome!
Support this project though https://paypal.me/iikem or https://github.com/sponsors/devcoons
This project is licensed under the GNU Affero General Public License v3.0 (AGPL-3.0).
You can find the full license text in the LICENSE file.
For commercial use, including proprietary or for-profit applications, you must obtain a separate license.
Contact me for commercial licensing at:
- GitHub: https://github.com/devcoons
- Email: i_-_-_s@outlook.com
