Skip to content
Permalink

Comparing changes

Choose two branches to see what’s changed or to start a new pull request. If you need to, you can also or learn more about diff comparisons.

Open a pull request

Create a new pull request by comparing changes across two branches. If you need to, you can also . Learn more about diff comparisons here.
base repository: bantu/linux
Failed to load repositories. Confirm that selected base ref is valid, then try again.
Loading
base: master
Choose a base ref
...
head repository: bantu/linux
Failed to load repositories. Confirm that selected head ref is valid, then try again.
Loading
compare: kw-ba-400-dts
Choose a head ref
Checking mergeability… Don’t worry, you can still create the pull request.
  • 1 commit
  • 2 files changed
  • 1 contributor

Commits on Jun 16, 2015

  1. Kirkwood: Add support for Seagate BlackArmor NAS 400/440 

    This patch adds support for the Seagate BlackArmor NAS 400 series.

The Seagate BlackArmor NAS 400 is a NAS system based on Marvell 88F6281.

It has
 - 32 MiB NAND
 - 256 MiB DRAM
 - 4 SATA slots
 - 2 Gigabit Ethernet ports
 - 4 USB 2.0 ports
 - a power button on the front
 - a reset button on the back
 - 1 LED for each SATA port (on the front)
 - 1 LED for each ethernet port (on the front)
 - 1 additional information LED on the front
 - a serial port available on the CN4 connector (1 - TX, 4 - RX, 6 - GND)
 - an LCD with two buttons
 - an ADT7473 thermal monitor and fan controller connected via i2c

Two SATA drives are connected to the 88F6281 SoC, two SATA drives are
connected to a 88SE6121, which is connected via PCIe.

Signed-off-by: Andreas Fischer <af@bantuX.org>
    @bantu
    bantu committed Jun 16, 2015
    Configuration menu
    Copy the full SHA
    579b18a View commit details
    Browse the repository at this point in the history
Loading